Results 1 to 6 of 6
I recently installed Fedora 11 on a spare computer I have to learn how to use it (would like to get away from windows completely). I'm having a hard time ...
- 08-08-2009 #1Just Joined!
- Join Date
- Aug 2009
- Posts
- 3
Wireless Card Setup, new fedora/linux user
I recently installed Fedora 11 on a spare computer I have to learn how to use it (would like to get away from windows completely). I'm having a hard time getting my wireless card to work. Its a wireless G card from linksys, I did everything on the Wireless Setup - Start Here thread, and this is my result (sorry if its choppy, I havent DLed Gedit for windows yet, but i tried to tidy it up as much as i could.)
============ lspci ============
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f5] (rev a2)
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1)
Kernel driver in use: pcieport-driver
00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1)
Kernel driver in use: pcieport-driver
00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1)
Kernel driver in use: pcieport-driver
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0261] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev
a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev
a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: ohci_hcd
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev
a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: ehci_hcd
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: pata_amd
Kernel modules: pata_amd
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266]
(rev a1)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2)
00:10.2 Multimedia audio controller [0401]: nVidia Corporation MCP51 AC97 Audio Controller
[10de:026b] (rev a2)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1)
Subsystem: FIRST INTERNATIONAL Computer Inc Device [1509:6006]
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
[1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Kernel driver in use: k8temp
Kernel modules: k8temp
03:00.0 VGA compatible controller [0300]: nVidia
Corporation GeForce 9500 GT [10de:0640] (rev a1)
Subsystem: Device [19f1:0943]
Kernel modules: nouveau
04:07.0 Network controller [0280]: RaLink RT2561/RT61
802.11g PCI [1814:0301]
Subsystem: Linksys WMP54G ver 4.1 [1737:0055]
Kernel driver in use: rt61pci
Kernel modules: rt61pci
============ lsusb ============
Bus 001 Device 006: ID 0781:5406 SanDisk Corp. Cruzer Micro 1/2/4GB Flash Drive
Bus 001 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
============ lsmod ============
Module Size Used by
nls_utf8 1500 1
vfat 8620 1
fat 41016 1 vfat
usb_storage 82556 1
fuse 49780 2
sco 9324 2
bridge 41488 0
stp 1944 1 bridge
llc 4780 2 bridge,stp
bnep 10888 2
l2cap 18884 3 bnep
bluetooth 44768 5 sco,bnep,l2cap
sunrpc 152352 1
ip6t_REJECT 3160 2
nf_conntrack_ipv6 11368 2
ip6table_filter 3132 1
ip6_tables 10712 1 ip6table_filter
ipv6 232288 22 ip6t_REJECT,nf_conntrack_ipv6
cpufreq_ondemand 6056 1
powernow_k8 14744 0
dm_multipath 13512 0
uinput 6496 0
ppdev 6304 0
arc4 1580 2
snd_intel8x0 27440 2
ecb 2452 2
snd_ac97_codec 91576 1 snd_intel8x0
rt61pci 18508 0
crc_itu_t 1580 1 rt61pci
rt2x00pci 6560 1 rt61pci
ac97_bus 1400 1 snd_ac97_codec
snd_pcm 62632 2 snd_intel8x0,snd_ac97_codec
rt2x00lib 32004 2 rt61pci,rt2x00pci
snd_timer 17888 1 snd_pcm
mac80211 164704 2 rt2x00pci,rt2x00lib
k8temp 3920 0
cfg80211 30560 2 rt2x00lib,mac80211
snd 49056 8
snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
hwmon 2148 1 k8temp
eeprom_93cx6 1736 1 rt61pci
soundcore 5404 1 snd
forcedeth 47416 0
snd_page_alloc 7644 2 snd_intel8x0,snd_pcm
sata_nv 20092 0
i2c_nforce2 6204 0
pcspkr 2156 0
parport_pc 22216 0
parport 28496 2 ppdev,parport_pc
ata_generic 4264 0
pata_acpi 3620 0
pata_amd 9772 4
nouveau 433376 1
drm 165948 2 nouveau
i2c_algo_bit 4804 1 nouveau
i2c_core 18016 4 i2c_nforce2,nouveau,drm,i2c_algo_bit
============ dmesg-firmware ============
rt61pci 0000:04:07.0: firmware: requesting rt2561s.bin
============ kernel version ============
2.6.29.4-167.fc11.i686.PAE
Any help from you guys would be GREATLY appreciated, I've been a long time admirer of my friends that use Linux and am very excited to learn it myself.
- 08-08-2009 #2
Hello and Welcome.
You device appears to be working and it has the correct modules loaded.
Can you open a terminal window and issue these commands please.802.11g PCI [1814:0301]
Subsystem: Linksys WMP54G ver 4.1 [1737:0055]
Kernel driver in use: rt61pci
Kernel modules: rt61pci
Code:su - ifconfig dmesg |grep Firmware
I do not respond to private messages asking for Linux help, Please keep it on the forums only.
All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
- 08-08-2009 #3Just Joined!
- Join Date
- Aug 2009
- Posts
- 3
Thank you for the super fast reply, its much appreciated. I ran those commands, for the "ifconfig" my result was
eth0 Link encap:Ethernet HWaddr 00:40:CA:93:4E:DA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:20 Base address:0xe000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1280 (1.2 KiB) TX bytes:1280 (1.2 KiB)
wlan0 Link encap:Ethernet HWaddr 00:23:69:D8:D9:82
inet6 addr: fe80::223:69ff:fed8:d982/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-23-69-D8-D9-82-A1-71-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
and for the command concerning firmware the only output was:
rt61pci 0000:04:07.0: firmware: requesting rt2561s.bin
- 08-08-2009 #4
It looks to me, as if the device is installed and working. Have you tried using the network tool to create a new connection? The device is named wlan0
You may need to disconnect the Wired cable beforehand, to avoid conflicts. (if it's plugged in)wlan0 Link encap:Ethernet HWaddr 00:23:69
8
9:82
inet6 addr: fe80::223:69ff:fed8:d982/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)I do not respond to private messages asking for Linux help, Please keep it on the forums only.
All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
- 08-09-2009 #5Just Joined!
- Join Date
- Aug 2009
- Posts
- 3
Thanks so much for your help on that, I just needed to set it up in the network tool and pick a network, was really simple actually. Thanks again, no its time to figure out this wine tool so i can install some games/applications from my old windows pc
- 08-17-2009 #6Just Joined!
- Join Date
- Aug 2009
- Posts
- 3
Hi all. I too recently installed Fedora 11 and am having trouble with my wireless card. The card is a Dynex Wireless G PCI card. I also followed the instructions on the "Wireless Setup Start Here" thread. All (I hope) the required information is below. Thanks a lot!
Code:============ lspci ============ 00:00.0 Host bridge [0600]: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] [1002:cbb2] (rev 02) Kernel driver in use: agpgart-ati 00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M] [1002:7010] 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: ohci_hcd 00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: ALI 5451 Kernel modules: snd-ali5451 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] Subsystem: ALi Corporation ALi M1533 Aladdin IV/V ISA Bridge [10b9:1533] Kernel modules: alim7101_wdt, alim1535_wdt 00:08.0 Modem [0703]: ALi Corporation M5457 AC'97 Modem Controller [10b9:5457] Subsystem: Hewlett-Packard Company Device [103c:0850] 00:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972] Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 00:0f.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: ohci_hcd 00:10.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c4) Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: pata_ali Kernel modules: pata_ali 00:11.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: ali1535_smbus Kernel modules: alim7101_wdt, i2c-ali15x3, i2c-ali1535 00:12.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020] Subsystem: Hewlett-Packard Company Device [103c:0850] Kernel driver in use: natsemi Kernel modules: natsemi 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon IGP 330M/340M/350M [1002:4337] Subsystem: Hewlett-Packard Company Radeon IGP 345M [103c:0850] Kernel modules: radeon, radeonfb 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01) Subsystem: Device [17f9:0008] Kernel driver in use: ath5k Kernel modules: ath5k ============ lsusb ============ Bus 002 Device 002: ID 045e:007d Microsoft Corp. Notebook Optical Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0781:5406 SanDisk Corp. Cruzer Micro 1/2/4GB Flash Drive Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ============ lsmod ============ Module Size Used by vfat 8620 1 fat 41016 1 vfat usb_storage 82556 1 fuse 49780 2 sco 9324 2 bridge 41488 0 stp 1944 1 bridge llc 4780 2 bridge,stp bnep 10888 2 l2cap 18884 3 bnep bluetooth 44768 5 sco,bnep,l2cap sunrpc 152352 1 ip6t_REJECT 3160 2 nf_conntrack_ipv6 11368 2 ip6table_filter 3132 1 ip6_tables 10712 1 ip6table_filter ipv6 232288 22 ip6t_REJECT,nf_conntrack_ipv6 p4_clockmod 4208 0 dm_multipath 13512 0 uinput 6496 0 arc4 1580 2 ecb 2452 2 ath5k 117480 0 mac80211 164704 1 ath5k cfg80211 30560 2 ath5k,mac80211 ppdev 6304 0 snd_ali5451 17316 2 snd_ac97_codec 91576 1 snd_ali5451 radeon 480652 0 natsemi 24684 0 i2c_ali15x3 5824 0 pcspkr 2156 0 ac97_bus 1400 1 snd_ac97_codec joydev 8964 0 drm 166936 1 radeon snd_pcm 62632 2 snd_ali5451,snd_ac97_codec snd_timer 17888 1 snd_pcm i2c_ali1535 5340 0 i2c_algo_bit 4852 1 radeon video 17372 0 i2c_core 18056 5 radeon,i2c_ali15x3,drm,i2c_ali1535,i2c_algo_bit parport_pc 22216 0 snd 49056 8 snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer parport 28496 2 ppdev,parport_pc soundcore 5404 1 snd firewire_ohci 19456 0 yenta_socket 21228 2 alim1535_wdt 4324 0 output 2364 1 video snd_page_alloc 7644 1 snd_pcm firewire_core 36556 1 firewire_ohci crc_itu_t 1580 1 firewire_core rsrc_nonstatic 9784 1 yenta_socket ata_generic 4264 0 pata_acpi 3620 0 pata_ali 8836 2 ============ dmesg-firmware ============ ============ kernel version ============ 2.6.29.4-167.fc11.i686.PAE


Reply With Quote