Results 1 to 3 of 3
Hi All,
I have a one problem when i mapped a SAN to the linux box RHEL 5.3
i show the following messeage
Buffer IO error on Device /dev/sdb
and ...
- 07-20-2010 #1Just Joined!
- Join Date
- Jul 2010
- Posts
- 2
Buffer IO error on Device /dev/sdb
Hi All,
I have a one problem when i mapped a SAN to the linux box RHEL 5.3
i show the following messeage
Buffer IO error on Device /dev/sdb
and unable to find it in fdisk -l
Can somebody help me ?
- 07-20-2010 #2
You dont provide much information,
but it sounds like the device sdb was there at a point in time
and then something/someone forcefully removed it again.
Possible causes can include:
- FC cable removed or
- zoning wrongfully enforced on the switch, so that the hba cannot connect to the disk anymore
- you mentioned mapping: are you sure, you mapped the disk to the correct hba?You must always face the curtain with a bow.
- 07-20-2010 #3Just Joined!
- Join Date
- Jul 2010
- Posts
- 2
Hi Irithori,
I have done zoning successfully also FC cable is not removed.
It shows in cat /proc/partitions but does not show in fdisk -l
Thanks,
Vishnu


Reply With Quote