Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
I've been struggling with this problem for about 7 or so hours across two days. I'm hoping you guys can help me. I installed fedora 15 with the KDE desktop ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8

    Fedora 15 kde - trying to install WLAN drivers on laptop


    I've been struggling with this problem for about 7 or so hours across two days. I'm hoping you guys can help me.

    I installed fedora 15 with the KDE desktop environment on my hp pavilion g6 1a44ca notebook.

    wlan network drivers are not being detected. I typed in lspci into the terminal and found that my network controller is "Ralink Device 539f"

    On another forum a user linked me to a linux Ralink driver (can't post links yet)

    the driver is on the ralinktech website under the software tab and after clicking the linux tab it is the top download link labeled "RT539xPCIe"

    I have it on my laptop however I don't know how to use it. I have tried using the make command in the terminal but it says there is nothing to make. there is a readme file, however I cannot seem to follow the instructions. I keep getting invalid directories in the terminal.

    does anyone know how I can either use these files to install my wlan drivers or have another way to get a wifi connection on my laptop?

    I have teamviewer if anyone would find it easier to do it themselves or tinker with it rather than to try explaining it to me.

  2. #2
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Hello and Welcome!
    First, I'd suggest looking to this page.
    Post back with all results of the commands listed.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  3. #3
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8
    OK so upon entering the command "/sbin/lspci -knn" I received this information:
    Code:
    00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
    00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602]
            Kernel modules: shpchp
    00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604]
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605]
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606]
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ahci
    00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ohci_hcd
    00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ehci_hcd
    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ohci_hcd
    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ehci_hcd
    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel modules: sp5100_tco, i2c-piix4
    00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40)
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: pata_atiixp
            Kernel modules: ata_generic, pata_acpi, pata_atiixp
    00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: HDA Intel
            Kernel modules: snd-hda-intel
    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
            Subsystem: Hewlett-Packard Company Device [103c:1697]
    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
    00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ohci_hcd
    00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ohci_hcd
    00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: ehci_hcd
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
            Kernel modules: amd64_edac_mod
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
            Kernel driver in use: k10temp
            Kernel modules: k10temp
    00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
    01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility Radeon HD 4200] [1002:9712]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: radeon
            Kernel modules: radeon
    01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: HDA Intel
            Kernel modules: snd-hda-intel
    02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
            Subsystem: Hewlett-Packard Company Device [103c:1697]
            Kernel driver in use: r8169
            Kernel modules: r8169
    03:00.0 Network controller [0280]: RaLink Device [1814:539f]
            Subsystem: Hewlett-Packard Company Device [103c:1637]
    04:00.0 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)
            Subsystem: Hewlett-Packard Company Device [103c:1697]
    then when I enter the command "lsmod" I get:

    Code:
    Module                  Size  Used by
    vfat                    8720  0 
    fat                    44848  1 vfat
    usb_storage            45615  0 
    uas                     7783  0 
    fuse                   62289  3 
    rfcomm                 61215  8 
    sco                    16268  2 
    bnep                   14899  2 
    l2cap                  52193  16 rfcomm,bnep
    8021q                  18723  0 
    garp                    6087  1 8021q
    stp                     1951  1 garp
    llc                     4716  2 garp,stp
    cpufreq_ondemand        9466  4 
    sunrpc                195388  1 
    powernow_k8            16054  0 
    freq_table              3963  2 cpufreq_ondemand,powernow_k8
    mperf                   1505  1 powernow_k8
    ip6t_REJECT             4048  2 
    nf_conntrack_ipv6       7978  1 
    nf_defrag_ipv6          9531  1 nf_conntrack_ipv6
    ip6table_filter         1695  1 
    ip6_tables             16850  1 ip6table_filter
    snd_hda_codec_hdmi     22998  1 
    snd_hda_codec_idt      56833  1 
    snd_hda_intel          23694  2 
    snd_hda_codec          80822  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    snd_hwdep               6368  1 snd_hda_codec
    btusb                  14708  2 
    snd_seq                52438  0 
    snd_seq_device          6001  1 snd_seq
    snd_pcm                78484  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
    bluetooth              91207  9 rfcomm,sco,bnep,l2cap,btusb
    snd_timer              19593  2 snd_seq,snd_pcm
    sp5100_tco              5333  0 
    uvcvideo               54609  0 
    hp_wmi                  6165  0 
    sparse_keymap           3302  1 hp_wmi
    snd                    62686  13 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
    soundcore               6299  1 snd
    edac_core              40712  0 
    edac_mce_amd           13274  0 
    i2c_piix4              10526  0 
    r8169                  35525  0 
    rfkill                 16552  3 bluetooth,hp_wmi
    videodev               63426  1 uvcvideo
    wmi                     9105  1 hp_wmi
    snd_page_alloc          7431  2 snd_hda_intel,snd_pcm
    k10temp                 3303  0 
    v4l2_compat_ioctl32     6697  1 videodev
    mii                     4318  1 r8169
    shpchp                 24582  0 
    microcode              18117  0 
    serio_raw               4426  0 
    joydev                  9635  0 
    ipv6                  282108  39 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
    pata_acpi               3443  0 
    ata_generic             3675  0 
    pata_atiixp             4189  0 
    video                  12432  0 
    radeon                688160  3 
    ttm                    55120  1 radeon
    drm_kms_helper         27515  1 radeon
    drm                   187984  5 radeon,ttm,drm_kms_helper
    i2c_algo_bit            5014  1 radeon
    i2c_core               25468  6 i2c_piix4,videodev,radeon,drm_kms_helper,drm,i2c_algo_bit
    then when I enter dmesg I get:

    Code:
    [    0.299030] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
    [    0.299060] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [    0.299064] pci 0000:00:04.0: PME# disabled
    [    0.299080] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
    [    0.299108] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [    0.299112] pci 0000:00:05.0: PME# disabled
    [    0.299126] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
    [    0.299155] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [    0.299158] pci 0000:00:06.0: PME# disabled
    [    0.299190] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
    [    0.299209] pci 0000:00:11.0: reg 10: [io  0x4038-0x403f]
    [    0.299220] pci 0000:00:11.0: reg 14: [io  0x404c-0x404f]
    [    0.299230] pci 0000:00:11.0: reg 18: [io  0x4030-0x4037]
    [    0.299239] pci 0000:00:11.0: reg 1c: [io  0x4048-0x404b]
    [    0.299249] pci 0000:00:11.0: reg 20: [io  0x4010-0x401f]
    [    0.299260] pci 0000:00:11.0: reg 24: [mem 0xf050b000-0xf050b3ff]
    [    0.299306] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [    0.299320] pci 0000:00:12.0: reg 10: [mem 0xf050a000-0xf050afff]
    [    0.299388] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [    0.299905] pci 0000:00:12.2: reg 10: [mem 0xf0509000-0xf05090ff]
    [    0.302690] pci 0000:00:12.2: supports D1 D2
    [    0.302692] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.302697] pci 0000:00:12.2: PME# disabled
    [    0.302720] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [    0.302734] pci 0000:00:13.0: reg 10: [mem 0xf0508000-0xf0508fff]
    [    0.302805] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [    0.302963] pci 0000:00:13.2: reg 10: [mem 0xf0507000-0xf05070ff]
    [    0.306220] pci 0000:00:13.2: supports D1 D2
    [    0.306222] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.306227] pci 0000:00:13.2: PME# disabled
    [    0.306249] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [    0.306321] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [    0.306335] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
    [    0.306345] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
    [    0.306355] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
    [    0.306364] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
    [    0.306374] pci 0000:00:14.1: reg 20: [io  0x4000-0x400f]
    [    0.306411] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [    0.306432] pci 0000:00:14.2: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
    [    0.306488] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    0.306493] pci 0000:00:14.2: PME# disabled
    [    0.306507] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [    0.306579] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [    0.306620] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [    0.306633] pci 0000:00:14.5: reg 10: [mem 0xf0506000-0xf0506fff]
    [    0.306698] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
    [    0.306712] pci 0000:00:16.0: reg 10: [mem 0xf0505000-0xf0505fff]
    [    0.306782] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
    [    0.306962] pci 0000:00:16.2: reg 10: [mem 0xf0504000-0xf05040ff]
    [    0.309983] pci 0000:00:16.2: supports D1 D2
    [    0.309985] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [    0.309990] pci 0000:00:16.2: PME# disabled
    [    0.310011] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [    0.310030] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [    0.310047] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [    0.310063] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [    0.310082] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [    0.310131] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
    [    0.310141] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
    [    0.310147] pci 0000:01:05.0: reg 14: [io  0x3000-0x30ff]
    [    0.310152] pci 0000:01:05.0: reg 18: [mem 0xf0400000-0xf040ffff]
    [    0.310164] pci 0000:01:05.0: reg 24: [mem 0xf0300000-0xf03fffff]
    [    0.310178] pci 0000:01:05.0: supports D1 D2
    [    0.310189] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
    [    0.310199] pci 0000:01:05.1: reg 10: [mem 0xf0410000-0xf0413fff]
    [    0.310227] pci 0000:01:05.1: supports D1 D2
    [    0.310268] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.310272] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
    [    0.310276] pci 0000:00:01.0:   bridge window [mem 0xf0300000-0xf04fffff]
    [    0.310281] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [    0.310322] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
    [    0.310336] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
    [    0.310358] pci 0000:02:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
    [    0.310373] pci 0000:02:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
    [    0.310410] pci 0000:02:00.0: supports D1 D2
    [    0.310413] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.310418] pci 0000:02:00.0: PME# disabled
    [    0.312004] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [    0.312012] pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
    [    0.312017] pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [    0.312023] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [    0.312085] pci 0000:03:00.0: [1814:539f] type 0 class 0x000280
    [    0.312100] pci 0000:03:00.0: reg 10: [mem 0xf0200000-0xf020ffff]
    [    0.314019] pci 0000:00:05.0: PCI bridge to [bus 03-03]
    [    0.314027] pci 0000:00:05.0:   bridge window [io  0xfffffffffffff000-0x0000] (disabled)
    [    0.314032] pci 0000:00:05.0:   bridge window [mem 0xf0200000-0xf02fffff]
    [    0.314036] pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.314091] pci 0000:04:00.0: [10ec:5209] type 0 class 0x00ff00
    [    0.314107] pci 0000:04:00.0: reg 10: [mem 0xf0100000-0xf0100fff]
    [    0.314159] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [    0.314191] pci 0000:04:00.0: supports D1 D2
    [    0.314194] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
    [    0.314204] pci 0000:04:00.0: PME# disabled
    [    0.316009] pci 0000:00:06.0: PCI bridge to [bus 04-04]
    [    0.316016] pci 0000:00:06.0:   bridge window [io  0xfffffffffffff000-0x0000] (disabled)
    [    0.316020] pci 0000:00:06.0:   bridge window [mem 0xf0100000-0xf01fffff]
    [    0.316025] pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.316096] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
    [    0.316101] pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.316106] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [    0.316112] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.316116] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.316119] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.316122] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.316126] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [    0.316129] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [    0.316132] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [    0.316136] pci 0000:00:14.4:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
    [    0.316139] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [    0.316142] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [    0.316145] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [    0.316149] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [    0.316152] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [    0.316155] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [    0.316159] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [    0.316162] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [    0.316165] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
    [    0.316169] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
    [    0.316172] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [    0.316199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.316516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    [    0.316576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
    [    0.316646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
    [    0.316710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
    [    0.316822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [    0.317110]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.317436]  pci0000:00: ACPI _OSC control (0x19) granted
    [    0.326430] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326502] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326580] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326656] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326716] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326763] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326814] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.326861] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.327018] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.327024] vgaarb: loaded
    [    0.327127] SCSI subsystem initialized
    [    0.327159] libata version 3.00 loaded.
    [    0.327159] usbcore: registered new interface driver usbfs
    [    0.327159] usbcore: registered new interface driver hub
    [    0.327159] usbcore: registered new device driver usb
    [    0.327159] PCI: Using ACPI for IRQ routing
    [    0.327159] PCI: pci_cache_line_size set to 64 bytes
    [    0.328011] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
    [    0.328015] reserve RAM buffer: 00000000de4a8000 - 00000000dfffffff 
    [    0.328019] reserve RAM buffer: 00000000dfd3f000 - 00000000dfffffff 
    [    0.328022] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff 
    [    0.328155] NetLabel: Initializing
    [    0.328157] NetLabel:  domain hash size = 128
    [    0.328159] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.328172] NetLabel:  unlabeled traffic allowed by default
    [    0.328245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.328250] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [    0.329990] Switching to clocksource hpet
    [    0.330596] Switched to NOHz mode on CPU #3
    [    0.330645] Switched to NOHz mode on CPU #0
    [    0.330613] Switched to NOHz mode on CPU #2
    [    0.330619] Switched to NOHz mode on CPU #1
    [    0.340544] pnp: PnP ACPI init
    [    0.340570] ACPI: bus type pnp registered
    [    0.341189] pnp 00:00: [bus 00-ff]
    [    0.341193] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.341196] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.341199] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.341202] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [    0.341208] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [    0.341211] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [    0.341214] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [    0.341217] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [    0.341220] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [    0.341223] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [    0.341225] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [    0.341228] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [    0.341231] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [    0.341234] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [    0.341237] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [    0.341240] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
    [    0.341243] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
    [    0.341246] pnp 00:00: [mem 0xfed45000-0xffffffff window]
    [    0.341249] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.341336] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.341610] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [    0.341613] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [    0.341615] pnp 00:01: [mem 0xf8000000-0xfbffffff]
    [    0.341618] pnp 00:01: [mem 0xfed80000-0xfed80fff]
    [    0.341696] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.341700] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.341704] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
    [    0.341708] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
    [    0.341712] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.341866] pnp 00:02: [io  0x0000-0x000f]
    [    0.341869] pnp 00:02: [io  0x0081-0x008f]
    [    0.341871] pnp 00:02: [io  0x00c0-0x00df]
    [    0.341874] pnp 00:02: [dma 4]
    [    0.341916] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.341927] pnp 00:03: [io  0x00f0-0x00fe]
    [    0.341944] pnp 00:03: [irq 13]
    [    0.341992] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.342053] pnp 00:04: [io  0x0070-0x0071]
    [    0.342097] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.342107] pnp 00:05: [io  0x0061]
    [    0.342150] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.342165] pnp 00:06: [io  0x0010-0x001f]
    [    0.342167] pnp 00:06: [io  0x002e-0x002f]
    [    0.342170] pnp 00:06: [io  0x0072-0x0073]
    [    0.342172] pnp 00:06: [io  0x0080]
    [    0.342174] pnp 00:06: [io  0x00b0-0x00b1]
    [    0.342177] pnp 00:06: [io  0x0092]
    [    0.342179] pnp 00:06: [io  0x0400-0x04cf]
    [    0.342182] pnp 00:06: [io  0x04d0-0x04d1]
    [    0.342184] pnp 00:06: [io  0x04d6]
    [    0.342187] pnp 00:06: [io  0x0680-0x06ff]
    [    0.342189] pnp 00:06: [io  0x077a]
    [    0.342191] pnp 00:06: [io  0x0c00-0x0c01]
    [    0.342194] pnp 00:06: [io  0x0c14]
    [    0.342196] pnp 00:06: [io  0x0c50-0x0c52]
    [    0.342199] pnp 00:06: [io  0x0c6c]
    [    0.342204] pnp 00:06: [io  0x0c6f]
    [    0.342206] pnp 00:06: [io  0x0cd0-0x0cdb]
    [    0.342208] pnp 00:06: [io  0x0500-0x0501]
    [    0.342211] pnp 00:06: [io  0x0550]
    [    0.342289] system 00:06: [io  0x0400-0x04cf] has been reserved
    [    0.342293] system 00:06: [io  0x04d0-0x04d1] has been reserved
    [    0.342297] system 00:06: [io  0x04d6] has been reserved
    [    0.342300] system 00:06: [io  0x0680-0x06ff] has been reserved
    [    0.342304] system 00:06: [io  0x077a] has been reserved
    [    0.342307] system 00:06: [io  0x0c00-0x0c01] has been reserved
    [    0.342311] system 00:06: [io  0x0c14] has been reserved
    [    0.342314] system 00:06: [io  0x0c50-0x0c52] has been reserved
    [    0.342318] system 00:06: [io  0x0c6c] has been reserved
    [    0.342321] system 00:06: [io  0x0c6f] has been reserved
    [    0.342324] system 00:06: [io  0x0cd0-0x0cdb] has been reserved
    [    0.342328] system 00:06: [io  0x0500-0x0501] has been reserved
    [    0.342331] system 00:06: [io  0x0550] has been reserved
    [    0.342335] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.342387] pnp 00:07: [mem 0x000e0000-0x000fffff]
    [    0.342390] pnp 00:07: [mem 0xffe00000-0xffffffff]
    [    0.342392] pnp 00:07: [mem 0xfed80000-0xfed80fff]
    [    0.342460] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.342464] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
    [    0.342468] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
    [    0.342472] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.342490] pnp 00:08: [io  0x0060]
    [    0.342492] pnp 00:08: [io  0x0064]
    [    0.342501] pnp 00:08: [irq 1]
    [    0.342544] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.342567] pnp 00:09: [irq 12]
    [    0.342614] pnp 00:09: Plug and Play ACPI device, IDs SYN1e49 SYN1e00 SYN0002 PNP0f13 (active)
    [    0.344209] pnp: PnP ACPI: found 10 devices
    [    0.344214] ACPI: ACPI bus type pnp unregistered
    [    0.351401] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [    0.351446] pci 0000:00:06.0: BAR 15: assigned [mem 0xf0600000-0xf06fffff pref]
    [    0.351451] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.351455] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
    [    0.351459] pci 0000:00:01.0:   bridge window [mem 0xf0300000-0xf04fffff]
    [    0.351463] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [    0.351468] pci 0000:00:04.0: PCI bridge to [bus 02-02]
    [    0.351471] pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
    [    0.351475] pci 0000:00:04.0:   bridge window [mem disabled]
    [    0.351478] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [    0.351483] pci 0000:00:05.0: PCI bridge to [bus 03-03]
    [    0.351485] pci 0000:00:05.0:   bridge window [io  disabled]
    [    0.351489] pci 0000:00:05.0:   bridge window [mem 0xf0200000-0xf02fffff]
    [    0.351493] pci 0000:00:05.0:   bridge window [mem pref disabled]
    [    0.351498] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0600000-0xf060ffff pref]
    [    0.351502] pci 0000:00:06.0: PCI bridge to [bus 04-04]
    [    0.351504] pci 0000:00:06.0:   bridge window [io  disabled]
    [    0.351508] pci 0000:00:06.0:   bridge window [mem 0xf0100000-0xf01fffff]
    [    0.351511] pci 0000:00:06.0:   bridge window [mem 0xf0600000-0xf06fffff pref]
    [    0.351516] pci 0000:00:14.4: PCI bridge to [bus 05-05]
    [    0.351518] pci 0000:00:14.4:   bridge window [io  disabled]
    [    0.351527] pci 0000:00:14.4:   bridge window [mem disabled]
    [    0.351532] pci 0000:00:14.4:   bridge window [mem pref disabled]
    [    0.351544] pci 0000:00:01.0: setting latency timer to 64
    [    0.351566] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.351570] pci 0000:00:04.0: setting latency timer to 64
    [    0.351580] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.351584] pci 0000:00:05.0: setting latency timer to 64
    [    0.351593] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.351597] pci 0000:00:06.0: setting latency timer to 64
    [    0.351605] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.351608] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.351611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.351614] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [    0.351617] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [    0.351620] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [    0.351623] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [    0.351626] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [    0.351629] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [    0.351632] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [    0.351635] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [    0.351638] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [    0.351641] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [    0.351643] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [    0.351646] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [    0.351649] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
    [    0.351652] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff]
    [    0.351655] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff]
    [    0.351659] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
    [    0.351662] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf04fffff]
    [    0.351665] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [    0.351668] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
    [    0.351671] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
    [    0.351675] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
    [    0.351678] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
    [    0.351681] pci_bus 0000:04: resource 2 [mem 0xf0600000-0xf06fffff pref]
    [    0.351684] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
    [    0.351687] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
    [    0.351690] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.351693] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
    [    0.351696] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
    [    0.351699] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
    [    0.351702] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
    [    0.351705] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
    [    0.351708] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
    [    0.351711] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
    [    0.351714] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
    [    0.351717] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
    [    0.351720] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
    [    0.351724] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
    [    0.351727] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
    [    0.351730] pci_bus 0000:05: resource 19 [mem 0xe0000000-0xf7ffffff]
    [    0.351733] pci_bus 0000:05: resource 20 [mem 0xfc000000-0xfed3ffff]
    [    0.351736] pci_bus 0000:05: resource 21 [mem 0xfed45000-0xffffffff]
    [    0.351772] NET: Registered protocol family 2
    [    0.352091] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.354082] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.358098] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.358581] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.358584] TCP reno registered
    [    0.358613] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.358708] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    0.358896] NET: Registered protocol family 1
    [    0.358911] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [    0.438176] pci 0000:01:05.0: Boot video device
    [    0.438213] PCI: CLS 64 bytes, default 64
    [    0.438302] Trying to unpack rootfs image as initramfs...
    [    0.843300] Freeing initrd memory: 14000k freed
    [    0.850838] PCI-DMA: Disabling AGP.
    [    0.851000] PCI-DMA: aperture base @ d4000000 size 65536 KB
    [    0.851019] PCI-DMA: using GART IOMMU.
    [    0.851024] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [    0.855653] Simple Boot Flag at 0x44 set to 0x1
    [    0.856649] Intel AES-NI instructions are not detected.
    [    0.856873] audit: initializing netlink socket (disabled)
    [    0.856889] type=2000 audit(1312475364.855:1): initialized
    [    0.875094] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.878566] VFS: Disk quotas dquot_6.5.2
    [    0.878654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.879321] msgmni has been set to 11444
    [    0.879386] SELinux:  Registering netfilter hooks
    [    0.880517] NET: Registered protocol family 38
    [    0.880622] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.880770] io scheduler noop registered
    [    0.880775] io scheduler deadline registered
    [    0.880863] io scheduler cfq registered (default)
    [    0.881296] pcieport 0000:00:04.0: setting latency timer to 64
    [    0.881336] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
    [    0.881499] pcieport 0000:00:05.0: setting latency timer to 64
    [    0.881526] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
    [    0.881655] pcieport 0000:00:06.0: setting latency timer to 64
    [    0.881681] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
    [    0.881835] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.881870] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.881873] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    1.154236] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [    1.156281] ACPI: AC Adapter [AC] (on-line)
    [    1.156445] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    1.156451] ACPI: Power Button [PWRB]
    [    1.156537] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [    1.160298] ACPI: Lid Switch [LID]
    [    1.160408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [    1.160413] ACPI: Power Button [PWRF]
    [    1.160516] ACPI: Fan [FAN] (on)
    [    1.160712] ACPI: acpi_idle registered with cpuidle
    [    1.160744] ACPI: processor limited to max C-state 1
    [    1.177228] thermal LNXTHERM:00: registered as thermal_zone0
    [    1.177232] ACPI: Thermal Zone [TZ0] (55 C)
    [    1.183208] thermal LNXTHERM:01: registered as thermal_zone1
    [    1.183211] ACPI: Thermal Zone [TZ1] (0 C)
    [    1.183243] ERST: Table is not found!
    [    1.183381] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    1.190633] Non-volatile memory driver v1.3
    [    1.190637] Linux agpgart interface v0.103
    [    1.192297] brd: module loaded
    [    1.193059] loop: module loaded
    [    1.193377] ahci 0000:00:11.0: version 3.0
    [    1.193412] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    1.193538] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    [    1.193543] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
    [    1.194615] scsi0 : ahci
    [    1.194905] scsi1 : ahci
    [    1.195195] scsi2 : ahci
    [    1.195429] scsi3 : ahci
    [    1.195539] ata1: SATA max UDMA/133 abar m1024@0xf050b000 port 0xf050b100 irq 19
    [    1.195543] ata2: SATA max UDMA/133 abar m1024@0xf050b000 port 0xf050b180 irq 19
    [    1.195548] ata3: SATA max UDMA/133 abar m1024@0xf050b000 port 0xf050b200 irq 19
    [    1.195552] ata4: SATA max UDMA/133 abar m1024@0xf050b000 port 0xf050b280 irq 19
    [    1.195782] Fixed MDIO Bus: probed
    [    1.195898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.195997] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.196055] ehci_hcd 0000:00:12.2: setting latency timer to 64
    [    1.196059] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    1.196206] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [    1.202165] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    1.202171] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.202206] ehci_hcd 0000:00:12.2: debug port 1
    [    1.202236] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0509000
    [    1.208149] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    1.208185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.208189] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.208192] usb usb1: Product: EHCI Host Controller
    [    1.208194] usb usb1: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ehci_hcd
    [    1.208197] usb usb1: SerialNumber: 0000:00:12.2
    [    1.208387] hub 1-0:1.0: USB hub found
    [    1.208393] hub 1-0:1.0: 5 ports detected
    [    1.208782] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.208817] ehci_hcd 0000:00:13.2: setting latency timer to 64
    [    1.208822] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    1.208934] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [    1.210184] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    1.210191] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.210220] ehci_hcd 0000:00:13.2: debug port 1
    [    1.210238] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0507000
    [    1.216153] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    1.216195] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.216199] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.216202] usb usb2: Product: EHCI Host Controller
    [    1.216204] usb usb2: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ehci_hcd
    [    1.216207] usb usb2: SerialNumber: 0000:00:13.2
    [    1.216387] hub 2-0:1.0: USB hub found
    [    1.216393] hub 2-0:1.0: 5 ports detected
    [    1.216784] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.216825] ehci_hcd 0000:00:16.2: setting latency timer to 64
    [    1.216830] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [    1.216954] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    [    1.221163] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    1.221170] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.221205] ehci_hcd 0000:00:16.2: debug port 1
    [    1.221223] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0504000
    [    1.227143] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [    1.227181] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.227184] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.227187] usb usb3: Product: EHCI Host Controller
    [    1.227189] usb usb3: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ehci_hcd
    [    1.227192] usb usb3: SerialNumber: 0000:00:16.2
    [    1.227359] hub 3-0:1.0: USB hub found
    [    1.227365] hub 3-0:1.0: 4 ports detected
    [    1.227531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.227754] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.227799] ohci_hcd 0000:00:12.0: setting latency timer to 64
    [    1.227803] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    1.227915] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    [    1.229218] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf050a000
    [    1.242471] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [    1.242483] ACPI: Battery Slot [BAT0] (battery present)
    [    1.284177] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.284182] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.284185] usb usb4: Product: OHCI Host Controller
    [    1.284188] usb usb4: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ohci_hcd
    [    1.284190] usb usb4: SerialNumber: 0000:00:12.0
    [    1.284367] hub 4-0:1.0: USB hub found
    [    1.284410] hub 4-0:1.0: 5 ports detected
    [    1.284766] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.284803] ohci_hcd 0000:00:13.0: setting latency timer to 64
    [    1.284807] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    1.284932] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [    1.285162] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0508000
    [    1.340176] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.340181] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.340184] usb usb5: Product: OHCI Host Controller
    [    1.340187] usb usb5: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ohci_hcd
    [    1.340189] usb usb5: SerialNumber: 0000:00:13.0
    [    1.340359] hub 5-0:1.0: USB hub found
    [    1.340402] hub 5-0:1.0: 5 ports detected
    [    1.340660] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.340693] ohci_hcd 0000:00:14.5: setting latency timer to 64
    [    1.340697] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [    1.340759] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
    [    1.340810] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0506000
    [    1.395177] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.395181] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.395184] usb usb6: Product: OHCI Host Controller
    [    1.395187] usb usb6: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ohci_hcd
    [    1.395189] usb usb6: SerialNumber: 0000:00:14.5
    [    1.395364] hub 6-0:1.0: USB hub found
    [    1.395406] hub 6-0:1.0: 2 ports detected
    [    1.395718] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.395753] ohci_hcd 0000:00:16.0: setting latency timer to 64
    [    1.395757] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [    1.395823] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
    [    1.395887] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0505000
    [    1.450196] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.450200] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.450203] usb usb7: Product: OHCI Host Controller
    [    1.450206] usb usb7: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.x86_64 ohci_hcd
    [    1.450209] usb usb7: SerialNumber: 0000:00:16.0
    [    1.450376] hub 7-0:1.0: USB hub found
    [    1.450418] hub 7-0:1.0: 4 ports detected
    
    [    1.450590] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.450692] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [    1.453870] i8042: Detected active multiplexing controller, rev 1.1
    [    1.456602] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.456611] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    1.456614] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    1.456617] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    1.456620] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    1.456721] mousedev: PS/2 mouse device common for all mice
    [    1.457146] rtc_cmos 00:04: RTC can wake from S4
    [    1.468274] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    1.468308] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [    1.468440] device-mapper: uevent: version 1.0.3
    [    1.468535] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
    [    1.468599] cpuidle: using governor ladder
    [    1.468601] cpuidle: using governor menu
    [    1.468795] usbcore: registered new interface driver usbhid
    [    1.468798] usbhid: USB HID core driver
    [    1.468826] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [    1.469065] ip_tables: (C) 2000-2006 Netfilter Core Team
    [    1.469083] TCP cubic registered
    [    1.469085] Initializing XFRM netlink socket
    [    1.469105] NET: Registered protocol family 17
    [    1.469124] Registering the dns_resolver key type
    [    1.469270] PM: Hibernation image not present or could not be loaded.
    [    1.469286] registered taskstats version 1
    [    1.469586] IMA: No TPM chip found, activating TPM-bypass!
    [    1.469977]   Magic number: 7:933:488
    [    1.470146] rtc_cmos 00:04: setting system clock to 2011-08-04 16:29:26 UTC (1312475366)
    [    1.470209] Initalizing network drop monitor service
    [    1.498692] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [    1.501166] ata4: SATA link down (SStatus 0 SControl 300)
    [    1.501211] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.518122] usb 2-2: new high speed USB device using ehci_hcd and address 2
    [    1.655118] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.655149] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.656635] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
    [    1.656641] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.657141] ata2.00: ATAPI: hp       CDDVDW TS-L633R, 0300, max UDMA/100
    [    1.658282] ata1.00: configured for UDMA/100
    [    1.658571] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
    [    1.658841] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.658951] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [    1.658956] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.659337] sd 0:0:0:0: [sda] Write Protect is off
    [    1.659343] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.659518] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.661777] ata2.00: configured for UDMA/100
    [    1.665095] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633R  0300 PQ: 0 ANSI: 5
    [    1.670742] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.670747] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.670943] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.671052] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.689027] usb 2-2: New USB device found, idVendor=04f2, idProduct=b249
    [    1.689032] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
    [    1.689036] usb 2-2: Product: HP Webcam-101
    [    1.689038] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
    [    1.689040] usb 2-2: SerialNumber: SN0001
    [    1.856153] Refined TSC clocksource calibration: 1795.503 MHz.
    [    1.856159] Switching to clocksource tsc
    [    1.937242]  sda: sda1 sda2 sda3
    [    1.938162] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.940817] Freeing unused kernel memory: 948k freed
    [    1.941137] Write protecting the kernel read-only data: 10240k
    [    1.949635] Freeing unused kernel memory: 1528k freed
    [    1.959644] Freeing unused kernel memory: 1728k freed
    [    2.013539] dracut: dracut-009-10.fc15
    [    2.023086] usb 7-1: new full speed USB device using ohci_hcd and address 2
    [    2.028807] dracut: rd.luks=0: removing cryptoluks activation
    [    2.044501] udev[162]: starting version 167
    [    2.099729] [drm] Initialized drm 1.1.0 20060810
    [    2.141687] [drm] radeon defaulting to kernel modesetting.
    [    2.141691] [drm] radeon kernel modesetting enabled.
    [    2.141937] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.141943] radeon 0000:01:05.0: setting latency timer to 64
    [    2.144671] [drm] initializing kernel modesetting (RS880 0x1002:0x9712).
    [    2.144751] [drm] register mmio base: 0xF0400000
    [    2.144754] [drm] register mmio size: 65536
    [    2.150256] ATOM BIOS: HP_Rocky20
    [    2.150291] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
    [    2.150295] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
    [    2.150706] [drm] Detected VRAM RAM=256M, BAR=256M
    [    2.150710] [drm] RAM width 32bits DDR
    [    2.150821] [TTM] Zone  kernel: Available graphics memory: 2931898 kiB.
    [    2.150824] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
    [    2.150826] [TTM] Initializing pool allocator.
    [    2.150852] [drm] radeon: 256M of VRAM memory ready
    [    2.150855] [drm] radeon: 512M of GTT memory ready.
    [    2.150892] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    2.150895] [drm] Driver supports precise vblank timestamp query.
    [    2.150917] [drm] radeon: irq initialized.
    [    2.150921] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [    2.152333] [drm] Loading RS780 Microcode
    [    2.164201] radeon 0000:01:05.0: WB enabled
    [    2.196670] [drm] ring test succeeded in 0 usecs
    [    2.196913] [drm] radeon: ib pool ready.
    [    2.197051] [drm] ib test succeeded in 0 usecs
    [    2.197054] [drm] Enabling audio support
    [    2.197476] [drm] Radeon Display Connectors
    [    2.197478] [drm] Connector 0:
    [    2.197480] [drm]   VGA
    [    2.197483] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [    2.197485] [drm]   Encoders:
    [    2.197491] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [    2.197493] [drm] Connector 1:
    [    2.197495] [drm]   LVDS
    [    2.197497] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [    2.197500] [drm]   Encoders:
    [    2.197502] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
    [    2.197504] [drm] Connector 2:
    [    2.197506] [drm]   HDMI-A
    [    2.197507] [drm]   HPD1
    [    2.197510] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
    [    2.197512] [drm]   Encoders:
    [    2.197514] [drm]     DFP1: INTERNAL_UNIPHY
    [    2.243222] usb 7-1: New USB device found, idVendor=148f, idProduct=2000
    [    2.243227] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [    2.243231] usb 7-1: Product: CSR BS8510
    [    2.253243] [drm] radeon: power management initialized
    [    2.404116] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
    [    2.439150] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
    [    3.250793] [drm] fb mappable at 0xE0141000
    [    3.250796] [drm] vram apper at 0xE0000000
    [    3.250799] [drm] size 4325376
    [    3.250801] [drm] fb depth is 24
    [    3.250803] [drm]    pitch is 5632
    [    3.250911] fbcon: radeondrmfb (fb0) is primary device
    [    3.287383] Console: switching to colour frame buffer device 170x48
    [    3.297638] fb0: radeondrmfb frame buffer device
    [    3.297641] drm: registered panic notifier
    [    3.297649] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0
    [    3.334543] dracut: Starting plymouth daemon
    [    3.444329] dracut: rd.dm=0: removing DM RAID activation
    [    3.448604] dracut: rd.md=0: removing MD RAID activation
    [    3.486880] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [    3.493481] acpi device:02: registered as cooling_device5
    [    3.493502] ACPI Warning: For \_SB_.PCI0.AGP_.VGA_._DOS: Parameter count mismatch - ASL declared 3, ACPI requires 1 (20110112/nspredef-352)
    [    3.493598] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
    [    3.493677] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [    3.511884] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    3.511928] pata_atiixp 0000:00:14.1: setting latency timer to 64
    [    3.514110] scsi4 : pata_atiixp
    [    3.515776] scsi5 : pata_atiixp
    [    3.516736] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
    [    3.516740] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
    [    4.313996] dracut: Scanning devices sda3  for LVM logical volumes vg_mackenzielinux/lv_root vg_mackenzielinux/lv_swap
    [    4.467219] dracut: inactive '/dev/vg_mackenzielinux/lv_swap' [7.59 GiB] inherit
    [    4.467308] dracut: inactive '/dev/vg_mackenzielinux/lv_home' [43.22 GiB] inherit
    [    4.467387] dracut: inactive '/dev/vg_mackenzielinux/lv_root' [46.34 GiB] inherit
    [    4.887766] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [    4.955958] dracut: Checking filesystems
    [    4.955988] dracut: fsck -T -t noopts=_netdev -A -a
    [    5.027281] dracut: _Fedora-15-x86_6: clean, 109789/3039232 files, 1121226/12148736 blocks
    [    5.027588] dracut: Remounting /dev/mapper/vg_mackenzielinux-lv_root with -o ro,
    [    5.065485] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [    5.076944] dracut: Mounted root filesystem /dev/mapper/vg_mackenzielinux-lv_root
    [    5.217865] dracut: Switching root
    [    5.715419] type=1404 audit(1312475370.744:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
    [    5.889838] SELinux: 2048 avtab hash slots, 220448 rules.
    [    5.957261] SELinux: 2048 avtab hash slots, 220448 rules.
    [    6.656378] SELinux:  9 users, 13 roles, 3606 types, 191 bools, 1 sens, 1024 cats
    [    6.656384] SELinux:  81 classes, 220448 rules
    [    6.663138] SELinux:  Completing initialization.
    [    6.663141] SELinux:  Setting up existing superblocks.
    [    6.663155] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    [    6.663163] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    [    6.663179] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    [    6.663189] SELinux: initialized (dev proc, type proc), uses genfs_contexts
    [    6.663198] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    [    6.663242] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
    [    6.663820] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    [    6.663827] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    [    6.665198] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    [    6.665208] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    [    6.665214] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    [    6.665232] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
    [    6.665252] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    [    6.665281] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    [    6.665302] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    [    6.665312] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
    [    6.665319] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    [    6.665960] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    [    6.665986] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    [    6.666431] SELinux: initialized (dev dm-1, type ext4), uses xattr
    [    6.669271] type=1403 audit(1312475371.698:3): policy loaded auid=4294967295 ses=4294967295
    [    7.221090] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    [    7.222154] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.581417] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.586204] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.586959] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.591228] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.592042] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.596209] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.596939] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.601194] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.607198] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
    [    7.679231] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
    [    7.953694] NET: Registered protocol family 10
    [    7.985724] systemd[1]: Set hostname to <Mackenzie-Linux>.
    [    9.302538] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    [    9.303872] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    [    9.304757] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    [    9.327584] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    [    9.328720] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    [    9.545950] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    [    9.561463] EXT4-fs (dm-1): re-mounted. Opts: (null)
    [   10.670295] udev[472]: starting version 167
    [   11.161177] microcode: CPU0: patch_level=0x10000c8
    [   11.206960] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
    [   11.206968] shpchp 0000:00:01.0: Cannot reserve MMIO region
    [   11.207049] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   11.510665] wmi: Mapper loaded
    [   11.529197] Linux video capture interface: v2.00
    [   11.596642] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [   11.596677] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   11.596806] r8169 0000:02:00.0: setting latency timer to 64
    [   11.596813] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
    [   11.596859] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
    [   11.597129] r8169 0000:02:00.0: eth0: RTL8101e at 0xffffc90002dfe000, 64:31:50:91:48:f8, XID 00a00000 IRQ 43
    [   11.650766] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
    [   11.650771] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   11.761956] MCE: In-kernel MCE decoding enabled.
    [   11.776365] EDAC MC: Ver: 2.1.0 May  9 2011
    [   11.780157] EDAC amd64_edac: v3.3.0
    [   11.780344] EDAC amd64: DRAM ECC disabled.
    [   11.780367] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [   11.780370]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [   11.780371]  (Note that use of the override may cause unknown side effects.)
    [   11.980994] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597)
    [   11.981013] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff880183859cf8), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
    [   11.981027] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff880183859f00), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
    [   11.981090] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597)
    [   11.981097] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff880183859cf8), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
    [   11.981108] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff880183859f00), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
    [   11.981209] input: HP WMI hotkeys as /devices/virtual/input/input6
    [   11.981423] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597)
    [   11.981431] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff880183859cf8), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
    [   11.981442] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff880183859f00), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
    [   11.981456] hp-wmi: probe of hp-wmi failed with error -22
    [   12.063725] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b249)
    [   12.075129] microcode: CPU1: patch_level=0x10000c8
    [   12.076821] input: HP Webcam-101 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input7
    [   12.076913] usbcore: registered new interface driver uvcvideo
    [   12.076916] USB Video Class driver (v1.0.0)
    [   12.078652] microcode: CPU2: patch_level=0x10000c8
    [   12.105413] microcode: CPU3: patch_level=0x10000c8
    [   12.117239] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [   12.117335] SP5100 TCO timer: mmio address 0xb8fe00 already in use
    [   12.121198] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [   12.126705] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.150648] Bluetooth: Core ver 2.15
    [   12.151069] NET: Registered protocol family 31
    [   12.151072] Bluetooth: HCI device and connection manager initialized
    [   12.151077] Bluetooth: HCI socket layer initialized
    [   12.159922] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.161797] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.163131] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.216489] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.216516] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.219849] microcode: AMD microcode update via /dev/cpu/microcode not supported
    [   12.487014] r8169 0000:02:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
    [   12.585283] udev[488]: renamed network interface eth0 to p2p1
    [   12.590541] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [   12.590916] usbcore: registered new interface driver btusb
    [   12.968155] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   12.968241] HDA Intel 0000:00:14.2: setting latency timer to 64
    [   13.054412] ALSA sound/pci/hda/patch_sigmatel.c:5503: mute LED gpio 1 polarity 0
    [   13.054422] ALSA sound/pci/hda/hda_codec.c:4633: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
    [   13.054426] ALSA sound/pci/hda/hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   13.054431] ALSA sound/pci/hda/hda_codec.c:4641:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
    [   13.054434] ALSA sound/pci/hda/hda_codec.c:4642:    mono: mono_out=0x0
    [   13.054437] ALSA sound/pci/hda/hda_codec.c:4646:    inputs:
    [   13.054440] ALSA sound/pci/hda/hda_codec.c:4652: 
    [   13.054665] ALSA sound/pci/hda/patch_sigmatel.c:3073: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
    [   13.064397] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [   13.064556] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [   13.065035] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [   13.065101] HDA Intel 0000:01:05.1: setting latency timer to 64
    [   13.110276] Adding 7962620k swap on /dev/mapper/vg_mackenzielinux-lv_swap.  Priority:0 extents:1 across:7962620k 
    [   13.627746] systemd-fsck[740]: /dev/sda2: clean, 81/128016 files, 49226/512000 blocks
    [   13.779634] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [   13.811666] SELinux: initialized (dev sda2, type ext4), uses xattr
    [   15.697747] systemd-fsck[797]: /dev/mapper/vg_mackenzielinux-lv_home: clean, 722/2834432 files, 245585/11329536 blocks
    [   15.844691] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [   15.844707] SELinux: initialized (dev dm-2, type ext4), uses xattr
    [   17.442133] avahi-daemon[838]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
    [   17.442711] avahi-daemon[838]: Successfully dropped root privileges.
    [   17.443279] avahi-daemon[838]: avahi-daemon 0.6.30 starting up.
    [   17.445170] avahi-daemon[838]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
    [   17.526691] acpid[847]: starting up with netlink and the input layer
    [   17.547208] acpid[847]: skipping incomplete file /etc/acpi/events/videoconf
    [   17.547756] acpid[847]: 1 rule loaded
    [   17.548068] acpid[847]: waiting for events: event logging is off
    [   17.917680] ntpd[848]: ntpd 4.2.6p3@1.2290-o Fri May  6 16:26:49 UTC 2011 (1)
    [   17.928038] ntpd[848]: proto: precision = 0.144 usec
    [   17.928071] ntpd[848]: 0.0.0.0 c01d 0d kern kernel time sync enabled
    [   18.044408] ntpd[848]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
    [   18.044729] ntpd[848]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    [   18.124401] ntpd[848]: Listen and drop on 1 v6wildcard :: UDP 123
    [   18.124890] ntpd[848]: Listen normally on 2 lo 127.0.0.1 UDP 123
    [   18.124904] ntpd[848]: Listen normally on 3 lo ::1 UDP 123
    [   18.125032] ntpd[848]: peers refreshed
    [   18.125232] ntpd[848]: Listening on routing socket on fd #20 for interface updates
    [   20.983591] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   21.490885] r8169 0000:02:00.0: p2p1: link down
    [   21.490894] r8169 0000:02:00.0: p2p1: link down
    [   21.492355] ADDRCONF(NETDEV_UP): p2p1: link is not ready
    [   22.391969] auditd (960): /proc/960/oom_adj is deprecated, please use /proc/960/oom_score_adj instead.
    [   23.067549] powernow-k8: Found 1 AMD Phenom(tm) II P960 Quad-Core Processor (4 cpu cores) (version 2.20.00)
    [   23.067611] powernow-k8:    0 : pstate 0 (1800 MHz)
    [   23.067614] powernow-k8:    1 : pstate 1 (1600 MHz)
    [   23.067616] powernow-k8:    2 : pstate 2 (1300 MHz)
    [   23.067619] powernow-k8:    3 : pstate 3 (800 MHz)
    [   23.116313] RPC: Registered udp transport module.
    [   23.116318] RPC: Registered tcp transport module.
    [   23.116320] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [   23.139155] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    [   23.240885] r8169 0000:02:00.0: p2p1: link up
    [   23.242387] ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
    [   23.819864] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    [   23.819868] All bugs added by David S. Miller <davem@redhat.com>
    [   33.314184] p2p1: no IPv6 routers present
    [   72.323271] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
    [  529.238243] SELinux: 2048 avtab hash slots, 224251 rules.
    [  529.307637] SELinux: 2048 avtab hash slots, 224251 rules.
    [  530.100178] SELinux:  9 users, 13 roles, 3622 types, 192 bools, 1 sens, 1024 cats
    [  530.100184] SELinux:  81 classes, 224251 rules
    [  530.182573] SELinux:  Context system_u:system_r:httpd_zarafa_script_t:s0-s0:c0.c1023 became invalid (unmapped).
    [  530.592611] SELinux:  Context unconfined_u:system_r:httpd_zarafa_script_t:s0-s0:c0.c1023 became invalid (unmapped).
    [ 1023.638796] type=1305 audit(1312490788.332:3278): audit_pid=0 old=960 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
    [ 1023.707512] type=1305 audit(1312490788.401:3279): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditctl_t:s0 res=1
    [ 1366.255847] r8169 0000:02:00.0: p2p1: link down
    [ 2406.580669] usb 7-1: USB disconnect, address 2
    [ 2408.862242] usb 7-1: new full speed USB device using ohci_hcd and address 3
    [ 2409.157436] usb 7-1: New USB device found, idVendor=148f, idProduct=2000
    [ 2409.157447] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [ 2409.157455] usb 7-1: Product: CSR BS8510
    [ 2409.351611] Bluetooth: L2CAP ver 2.15
    [ 2409.351618] Bluetooth: L2CAP socket layer initialized
    [ 2409.393478] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 2409.393486] Bluetooth: BNEP filters: protocol multicast
    [ 2409.401885] Bluetooth: SCO (Voice Link) ver 0.6
    [ 2409.401888] Bluetooth: SCO socket layer initialized
    [ 2409.609797] Bluetooth: RFCOMM TTY layer initialized
    [ 2409.609813] Bluetooth: RFCOMM socket layer initialized
    [ 2409.609819] Bluetooth: RFCOMM ver 1.11
    [ 2412.127584] usb 7-1: USB disconnect, address 3
    [ 2412.128508] btusb_bulk_complete: hci0 urb ffff880177e2eb40 failed to resubmit (19)
    [ 2412.128527] btusb_intr_complete: hci0 urb ffff880177e2e180 failed to resubmit (19)
    [ 2412.129505] btusb_bulk_complete: hci0 urb ffff880177e2e840 failed to resubmit (19)
    [ 2412.129617] btusb_send_frame: hci0 urb ffff88015ed9ecc0 submission failed
    [ 2416.839232] usb 7-1: new full speed USB device using ohci_hcd and address 4
    [ 2417.070442] usb 7-1: New USB device found, idVendor=148f, idProduct=2000
    [ 2417.070453] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [ 2417.070461] usb 7-1: Product: CSR BS8510
    [ 2418.837575] usb 7-1: USB disconnect, address 4
    [ 2418.838368] btusb_bulk_complete: hci0 urb ffff880153d8da80 failed to resubmit (19)
    [ 2418.838386] btusb_intr_complete: hci0 urb ffff880153d8df00 failed to resubmit (19)
    [ 2418.839366] btusb_bulk_complete: hci0 urb ffff880171c39d80 failed to resubmit (19)
    [ 2418.839452] btusb_send_frame: hci0 urb ffff880177e2e9c0 submission failed
    [ 2420.724242] usb 7-1: new full speed USB device using ohci_hcd and address 5
    [ 2421.019501] usb 7-1: New USB device found, idVendor=148f, idProduct=2000
    [ 2421.019512] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [ 2421.019519] usb 7-1: Product: CSR BS8510
    [ 2440.869834] fuse init (API version 7.16)
    [ 2440.884871] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
    [ 2441.338997] SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
    [ 2583.403222] usb 1-2: new high speed USB device using ehci_hcd and address 2
    [ 2583.518763] usb 1-2: New USB device found, idVendor=0781, idProduct=5202
    [ 2583.518774] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 2583.518782] usb 1-2: Product: Relay UFD
    [ 2583.518787] usb 1-2: Manufacturer: Staples
    [ 2583.518792] usb 1-2: SerialNumber: 348531119AE348AC
    [ 2584.179321] usbcore: registered new interface driver uas
    [ 2584.188985] Initializing USB Mass Storage driver...
    [ 2584.189497] scsi6 : usb-storage 1-2:1.0
    [ 2584.189953] usbcore: registered new interface driver usb-storage
    [ 2584.189961] USB Mass Storage support registered.
    [ 2585.191065] scsi 6:0:0:0: Direct-Access     Staples  Relay UFD        8.02 PQ: 0 ANSI: 0 CCS
    [ 2585.193701] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [ 2585.194576] sd 6:0:0:0: [sdb] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
    [ 2585.195384] sd 6:0:0:0: [sdb] Write Protect is off
    [ 2585.195397] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
    [ 2585.196102] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 2585.196115] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 2585.200283] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 2585.200294] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 2585.201174]  sdb:
    [ 2585.204080] sd 6:0:0:0: [sdb] Asking for cache data failed
    [ 2585.204091] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 2585.204100] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 2590.745969] SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
    [ 2912.142872] SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
    [ 2918.149479] usb 1-2: USB disconnect, address 2
    [ 2968.266545] usb 7-1: USB disconnect, address 5
    [ 2968.267349] btusb_bulk_complete: hci0 urb ffff880177cfb300 failed to resubmit (19)
    [ 2968.267367] btusb_intr_complete: hci0 urb ffff880177cfba80 failed to resubmit (19)
    [ 2968.268357] btusb_bulk_complete: hci0 urb ffff880177cfbcc0 failed to resubmit (19)
    [ 2968.268437] btusb_send_frame: hci0 urb ffff8801162e79c0 submission failed
    [ 2970.878244] usb 7-1: new full speed USB device using ohci_hcd and address 6
    [ 2971.175478] usb 7-1: New USB device found, idVendor=148f, idProduct=2000
    [ 2971.175489] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [ 2971.175497] usb 7-1: Product: CSR BS8510
    [ 4690.586368] r8169 0000:02:00.0: p2p1: link up
    [ 4868.238384] r8169 0000:02:00.0: p2p1: link down
    [ 5992.506756] PM: Syncing filesystems ... done.
    [ 5992.523356] PM: Preparing system for mem sleep
    [ 5992.588159] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [ 5992.600161] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    [ 5992.611168] PM: Entering mem sleep
    [ 5992.611534] Suspending console(s) (use no_console_suspend to debug)
    [ 5992.646295] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 5992.646496] sd 0:0:0:0: [sda] Stopping disk
    [ 5992.655204] ehci_hcd 0000:00:16.2: PCI INT B disabled
    [ 5992.655215] ohci_hcd 0000:00:16.0: PCI INT A disabled
    [ 5992.655225] ohci_hcd 0000:00:14.5: PCI INT C disabled
    [ 5992.655426] ehci_hcd 0000:00:13.2: PCI INT B disabled
    [ 5992.655443] ohci_hcd 0000:00:13.0: PCI INT A disabled
    [ 5992.655449] pata_atiixp 0000:00:14.1: PCI INT B disabled
    [ 5992.655465] ehci_hcd 0000:00:12.2: PCI INT B disabled
    [ 5992.655481] ohci_hcd 0000:00:12.0: PCI INT A disabled
    [ 5992.756186] HDA Intel 0000:01:05.1: PCI INT B disabled
    [ 5992.756202] ACPI handle has no context!
    [ 5992.757261] HDA Intel 0000:00:14.2: PCI INT A disabled
    [ 5993.187113] ahci 0000:00:11.0: PCI INT A disabled
    [ 5993.430508] [drm] Disabling audio support
    [ 5993.509692] radeon 0000:01:05.0: PCI INT A disabled
    [ 5993.520242] PM: suspend of devices complete after 908.414 msecs
    [ 5993.520539] r8169 0000:02:00.0: PME# enabled
    [ 5993.520556] pcieport 0000:00:04.0: wake-up capability enabled by ACPI
    [ 5993.564245] PM: late suspend of devices complete after 43.993 msecs
    [ 5993.564301] ACPI: Preparing to enter system sleep state S3
    [ 5993.585320] PM: Saving platform NVS memory
    [ 5993.609341] Disabling non-boot CPUs ...
    [ 5993.610308] Broke affinity for irq 1
    [ 5993.611476] CPU 1 is now offline
    [ 5993.629299] Broke affinity for irq 18
    [ 5993.630425] CPU 2 is now offline
    [ 5993.637330] CPU 3 is now offline
    [ 5993.637657] Back to C!
    [ 5993.637657] PM: Restoring platform NVS memory
    [ 5993.637657] PCI-DMA: Resuming GART IOMMU
    [ 5993.637657] PCI-DMA: Restoring GART aperture settings
    [ 5993.637657] Enabling non-boot CPUs ...
    [ 5993.637657] Booting Node 0 Processor 1 APIC 0x1
    [ 5993.728190] Switch to broadcast mode on CPU1
    [ 5993.729148] Switched to NOHz mode on CPU #1
    [ 5993.730381] NMI watchdog enabled, takes one hw-pmu counter.
    [ 5993.730623] CPU1 is up
    [ 5993.730831] Booting Node 0 Processor 2 APIC 0x2
    [ 5993.630213] Switch to broadcast mode on CPU2
    [ 5993.821354] NMI watchdog enabled, takes one hw-pmu counter.
    [ 5993.821649] CPU2 is up
    [ 5993.822084] Switched to NOHz mode on CPU #2
    [ 5993.822147] Booting Node 0 Processor 3 APIC 0x3
    [ 5993.637205] Switch to broadcast mode on CPU3
    [ 5993.913523] NMI watchdog enabled, takes one hw-pmu counter.
    [ 5993.913898] CPU3 is up
    [ 5993.914451] Switched to NOHz mode on CPU #3
    [ 5993.915793] ACPI: Waking up from system sleep state S3
    [ 5994.110290] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
    [ 5994.110316] pcieport 0000:00:05.0: restoring config space at offset 0xc (was 0xffff, writing 0x0)
    [ 5994.110321] pcieport 0000:00:05.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
    [ 5994.110326] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
    [ 5994.110332] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
    [ 5994.110354] pcieport 0000:00:06.0: restoring config space at offset 0xc (was 0xffff, writing 0x0)
    [ 5994.110358] pcieport 0000:00:06.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
    [ 5994.110363] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
    [ 5994.110369] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
    [ 5994.110410] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)
    [ 5994.121146] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf0509000-0xf05090ff] (PCI address [0xf0509000-0xf05090ff])
    [ 5994.121177] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
    [ 5994.132146] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf0507000-0xf05070ff] (PCI address [0xf0507000-0xf05070ff])
    [ 5994.132177] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
    [ 5994.132232] pata_atiixp 0000:00:14.1: restoring config space at offset 0x1 (was 0x2200003, writing 0x2200007)
    [ 5994.143135] ehci_hcd 0000:00:16.2: BAR 0: set to [mem 0xf0504000-0xf05040ff] (PCI address [0xf0504000-0xf05040ff])
    [ 5994.143166] ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
    [ 5994.143224] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
    [ 5994.143237] HDA Intel 0000:01:05.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    [ 5994.143249] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
    [ 5994.143292] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
    [ 5994.143541] PM: early resume of devices complete after 33.334 msecs
    [ 5994.143756] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 5994.143767] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5994.143782] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5994.143843] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5994.143867] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5994.143874] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5994.143896] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5994.144027] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5994.144034] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5994.144044] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5994.144154] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 5994.144159] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5994.144163] HDA Intel 0000:01:05.1: setting latency timer to 64
    [ 5994.144167] radeon 0000:01:05.0: setting latency timer to 64
    [ 5994.144191] pcieport 0000:00:04.0: wake-up capability disabled by ACPI
    [ 5994.144197] r8169 0000:02:00.0: PME# disabled
    [ 5994.146223] sd 0:0:0:0: [sda] Starting disk
    [ 5994.175002] radeon 0000:01:05.0: WB enabled
    
    [ 5994.207217] [drm] ring test succeeded in 0 usecs
    [ 5994.207233] [drm] ib test succeeded in 0 usecs
    [ 5994.207236] [drm] Enabling audio support
    [ 5994.335143] usb 2-2: reset high speed USB device using ehci_hcd and address 2
    [ 5994.448140] ata3: SATA link down (SStatus 0 SControl 300)
    [ 5994.448178] ata4: SATA link down (SStatus 0 SControl 300)
    [ 5994.574145] usb 7-1: reset full speed USB device using ohci_hcd and address 6
    [ 5994.603150] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5994.621781] ata2.00: configured for UDMA/100
    [ 5994.733235] btusb 7-1:1.0: no reset_resume for driver btusb?
    [ 5994.733239] btusb 7-1:1.1: no reset_resume for driver btusb?
    [ 5996.082148] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 5996.085380] ata1.00: configured for UDMA/100
    [ 5996.253254] PM: resume of devices complete after 2109.641 msecs
    [ 5996.254353] PM: Finishing wakeup.
    [ 5996.254356] Restarting tasks ... done.
    [ 5996.287535] video LNXVIDEO:00: Restoring backlight state
    [ 5996.289775] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
    [ 5997.315870] r8169 0000:02:00.0: p2p1: link down
    [ 5997.317820] ADDRCONF(NETDEV_UP): p2p1: link is not ready
    [ 6243.997965] r8169 0000:02:00.0: p2p1: link up
    [ 6244.001077] ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
    [ 6254.066138] p2p1: no IPv6 routers present
    [ 6260.548170] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
    [ 6260.548182] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6260.563634] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
    [ 6260.563645] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6260.773559] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
    [ 6260.773571] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6260.789022] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
    [ 6260.789034] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6260.971351] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
    [ 6260.971362] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6260.986821] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
    [ 6260.986827] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6261.172132] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
    [ 6261.172140] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    [ 6261.187608] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
    [ 6261.187614] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
    seems like a lot of junk code to me.

    upon entering the command "dmesg | grep firmware" I got:

    Code:
     r8169 0000:02:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
    I entered "uname -r" and it gave me:
    Code:
     2.6.38.6-26.rc1.fc15.x86_64



    I really hope this information will help fix my problem or give you some parameters of what steps I will need to follow to get my wifi working

  4. #4
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    What about output for ifconfig?
    That should have been in there, as well.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  5. #5
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8
    sorry here it is:

    Code:
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:188 errors:0 dropped:0 overruns:0 frame:0
              TX packets:188 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:13784 (13.4 KiB)  TX bytes:13784 (13.4 KiB)
    
    p2p1      Link encap:Ethernet  HWaddr 64:31:50:91:48:F8  
              inet addr:192.168.0.17  Bcast:192.168.0.255  Mask:255.255.255.0
              inet6 addr: fe80::6631:50ff:fe91:48f8/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:35645 errors:0 dropped:0 overruns:0 frame:0
              TX packets:22192 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:47622139 (45.4 MiB)  TX bytes:2604708 (2.4 MiB)
              Interrupt:43 Base address:0xe000

  6. #6
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    You'll need the rt28xxPCI drivers.:
    This link on the Ralink site.

    Save the .bin file, and install it following the steps found here.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  7. #7
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8
    ok I seem to have run into a problem. I was following the steps in the link provided to install binary files however when I attempt to set my file to executable by using the command
    Code:
     chmod +x rt2860.bin
    it doesn't do anything. It doesn't even give me an error. so it seems like it would be working however when i type in the code
    Code:
     ./rt2860.bin
    it tells me that it cannot execute binary file.

    I am in the directory of the bin file which I have simply placed in my home folder and I have root privileges so I do not understand what I have done wrong

  8. #8
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8
    ok so the binary is indeed executable now. I right clicked, went to permissions tab and it is marked as executable so I do not understand why it won't execute when i use the command ./rt2860.bin

  9. #9
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8
    after a little bit of reading I think the problem is that the bin file is a 32 bit file while my Fedora distro is 64bit.

    I have no idea where to go from here

  10. #10
    Just Joined!
    Join Date
    Aug 2011
    Posts
    8
    ok, i managed to install the firmware and drivers. i followed a guide on how to configure and install the right drivers for the rt2860 firmware. I cant seem to get it to load the driver though. the guide tells me to type

    Code:
     sudo depmod -ae
     sudo modprobe rt2860
    but it keeps telling me that -e needs -E or -F

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •