dell latitude x300

[gabo-fynix]

hi i installed a fedora disto- xange and now i can not activate and use my wifi( ipw2200)
i installed the latest kernel, and found that ipw2200 is already installed. but now i still i cant use or activate my wifi. i tried:
turning it on, lsmod modprobe, ifconfig, iwconfig,
/sbin/lspci -nn and dmesg
and it still does not work
as shown:

bash-4.1$ /sbin/lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01)
02:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
02:03.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
02:03.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 04)
02:04.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
02:05.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet [14e4:165d] (rev 01)
bash-4.1$ lsmod
Module                  Size  Used by
ipw2200               116478  0 
libipw                 21037  1 ipw2200
cfg80211              111003  2 ipw2200,libipw
rfkill                 13652  1 cfg80211
lib80211                4107  2 ipw2200,libipw
fuse                   51887  3 
tcp_lp                  1779  0 
ebtable_nat             1431  0 
ebtables               12146  1 ebtable_nat
ipt_MASQUERADE          1765  3 
iptable_nat             3945  1 
nf_nat                 16298  2 ipt_MASQUERADE,iptable_nat
bridge                 57131  0 
stp                     1438  1 bridge
llc                     3754  2 bridge,stp
sunrpc                165546  1 
cpufreq_ondemand        7262  1 
acpi_cpufreq            6285  0 
mperf                   1141  1 acpi_cpufreq
ip6t_REJECT             3470  2 
nf_conntrack_ipv6      14441  2 
ip6table_filter         1207  1 
ip6_tables              9937  1 ip6table_filter
ipv6                  229581  24 ip6t_REJECT,nf_conntrack_ipv6
uinput                  5228  0 
snd_intel8x0m           9516  0 
snd_intel8x0           23144  2 
snd_ac97_codec         89730  2 snd_intel8x0m,snd_intel8x0
ac97_bus                 922  1 snd_ac97_codec
snd_seq                43435  0 
snd_seq_device          5056  1 snd_seq
snd_pcm                61769  3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
tg3                    98727  0 
snd_timer              15435  2 snd_seq,snd_pcm
iTCO_wdt                8960  0 
snd                    47397  11 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,snd_timer
iTCO_vendor_support     2070  1 iTCO_wdt
soundcore               5088  1 snd
serio_raw               3589  0 
joydev                  7306  0 
dcdbas                  6608  0 
snd_page_alloc          6180  3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_i801                9016  0 
firewire_ohci          17697  0 
firewire_core          37873  1 firewire_ohci
yenta_socket           20882  0 
crc_itu_t               1235  1 firewire_core
i915                  242432  4 
drm_kms_helper         22278  1 i915
drm                   139248  4 i915,drm_kms_helper
i2c_algo_bit            4197  1 i915
i2c_core               21552  5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video                  17730  1 i915
output                  1625  1 video
bash-4.1$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.13-92.fc14.i686 (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Sat May 21 17:39:42 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002767e000 (usable)
[    0.000000]  BIOS-e820: 000000002767e000 - 00000000276e0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000276e0000 - 00000000276eb000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000276eb000 - 0000000027700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000027700000 - 0000000028000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x2767e max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF8000000 write-back
[    0.000000]   2 base 027700000 mask FFFF00000 uncachable
[    0.000000]   3 base 027800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
[    0.000000] reg 1, base: 512MB, range: 128MB, type WB
[    0.000000] reg 2, base: 631MB, range: 1MB, type UC
[    0.000000] reg 3, base: 632MB, range: 8MB, type UC
[    0.000000] total RAM covered: 631M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 16M         num_reg: 4      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
[    0.000000] reg 1, base: 512MB, range: 128MB, type WB
[    0.000000] reg 2, base: 631MB, range: 1MB, type UC
[    0.000000] reg 3, base: 632MB, range: 8MB, type UC
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-000000002767e000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0027400000 page 2M
[    0.000000]  0027400000 - 002767e000 page 4k
[    0.000000] kernel direct mapping tables up to 2767e000 at 15000-1c000
[    0.000000] RAMDISK: 26ab1000 - 2766e000
[    0.000000] ACPI: RSDP 000f60f0 00014 (v00 DELL  )
[    0.000000] ACPI: RSDT 276e4e1a 00038 (v01 DELL   Montara  06040000  LTP 00000000)
[    0.000000] ACPI: FACP 276eae9e 00074 (v01 DELL   MONTARA  06040000 PTL  00000050)
[    0.000000] ACPI: DSDT 276e5402 05A9C (v01 INTEL  MONTARAG 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 276fbfc0 00040
[    0.000000] ACPI: BOOT 276eafa4 00028 (v01 DELL   $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: ASF! 276eafcc 00034 (v01 DELL   MONTARA  06040000 PTL  00000001)
[    0.000000] ACPI: SSDT 276e52b0 0014A (v01 INTEL  CPU0CST  00000001 INTL 20020725)
[    0.000000] ACPI: SSDT 276e4e52 002D2 (v01 DELL   MONTARA  06040000 INTL 20020725)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 630MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2767e000
[    0.000000]   low ram: 0 - 2767e000
[    0.000000]   node 0 low ram: 00000000 - 2767e000
[    0.000000]   node 0 bootmap 00019000 - 0001ded0
[    0.000000] (9/32 early reservations) ==> bootmem [0000000000 - 002767e000]
[    0.000000]   #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #1 [0000400000 - 0000c2c900]    TEXT DATA BSS ==> [0000400000 - 0000c2c900]
[    0.000000]   #2 [0026ab1000 - 002766e000]          RAMDISK ==> [0026ab1000 - 002766e000]
[    0.000000]   #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #4 [0000c2d000 - 0000c3118c]              BRK ==> [0000c2d000 - 0000c3118c]
[    0.000000]   #5 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
[    0.000000]   #6 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
[    0.000000]   #7 [0000015000 - 0000019000]          PGTABLE ==> [0000015000 - 0000019000]
[    0.000000]   #8 [0000019000 - 000001e000]          BOOTMAP ==> [0000019000 - 000001e000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002767e
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0002767e
[    0.000000] On node 0 totalpages: 161293
[    0.000000] free_area_init_node: node 0, pgdat c09fe100, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1229 pages used for memmap
[    0.000000]   Normal zone: 156081 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 28000000 (gap: 28000000:d6c10000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu atc1800000 s35136 r0 d22208 u4194304
[    0.000000] pcpu-alloc: s35136 r0 d22208 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 160032
[    0.000000] Kernel command line: ro root=UUID=d7022e28-0496-47ab-bcfd-3d4c8195e6b5 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=pt-latin1 rhgb quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3227800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 615640k/645624k available (3768k kernel code, 29532k reserved, 2491k data, 544k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff575000 - 0xfffff000   (10792 kB)
[    0.000000]     pkmap   : 0xff000000 - 0xff400000   (4096 kB)
[    0.000000]     vmalloc : 0xe7e7e000 - 0xfeffe000   ( 369 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe767e000   ( 630 MB)
[    0.000000]       .init : 0xc0a1d000 - 0xc0aa5000   ( 544 kB)
[    0.000000]       .data : 0xc07ae14e - 0xc0a1ce70   (2491 kB)
[    0.000000]       .text : 0xc0400000 - 0xc07ae14e   (3768 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1199.036 MHz processor.
[    0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2398.07 BogoMIPS (lpj=1199036)
[    0.001017] pid_max: default: 32768 minimum: 301
[    0.001054] Security Framework initialized
[    0.001070] SELinux:  Initializing.
[    0.001101] SELinux:  Starting in permissive mode
[    0.001217] Mount-cache hash table entries: 512
[    0.001459] Initializing cgroup subsys ns
[    0.001469] Initializing cgroup subsys cpuacct
[    0.001479] Initializing cgroup subsys memory
[    0.001498] Initializing cgroup subsys devices
[    0.001504] Initializing cgroup subsys freezer
[    0.001508] Initializing cgroup subsys net_cls
[    0.001513] Initializing cgroup subsys blkio
[    0.001582] mce: CPU supports 5 MCE banks
[    0.001606] Performance Events: 
[    0.001611] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.001616] no hardware sampling interrupt available.
[    0.001620] p6 PMU driver.
[    0.001637] ... version:                0
[    0.001640] ... bit width:              32
[    0.001644] ... generic registers:      2
[    0.001648] ... value mask:             00000000ffffffff
[    0.001652] ... max period:             000000007fffffff
[    0.001657] ... fixed-purpose events:   0
[    0.001660] ... event mask:             0000000000000003
[    0.002135] SMP alternatives: switching to UP code
[    0.006141] Freeing SMP alternatives: 12k freed
[    0.006151] ACPI: Core revision 20100428
[    0.017060] ACPI: setting ELCR to 0200 (from 0c20)
[    0.019011] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.019019] ftrace: allocating 23154 entries in 46 pages
[    0.020156] weird, boot CPU (#0) not listed by the BIOS.
[    0.020162] SMP motherboard not detected.
[    0.020166] Local APIC not detected. Using dummy APIC emulation.
[    0.020169] SMP disabled
[    0.021138] Brought up 1 CPUs
[    0.021143] Total of 1 processors activated (2398.07 BogoMIPS).
[    0.021150] sizeof(vma)=88 bytes
[    0.021153] sizeof(page)=32 bytes
[    0.021156] sizeof(inode)=352 bytes
[    0.021159] sizeof(dentry)=132 bytes
[    0.021162] sizeof(ext3inode)=508 bytes
[    0.021165] sizeof(buffer_head)=56 bytes
[    0.021168] sizeof(skbuff)=192 bytes
[    0.021171] sizeof(task_struct)=3228 bytes
[    0.021429] devtmpfs: initialized
[    0.024937] atomic64 test passed for i586+ platform with CX8 and with SSE
[    0.024976] Time:  9:22:33  Date: 08/21/11
[    0.025062] NET: Registered protocol family 16
[    0.025273] ACPI: bus type pci registered
[    0.025652] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=2
[    0.025657] PCI: Using configuration type 1 for base access
[    0.028319] bio: create slab <bio-0> at 0
[    0.030007] ACPI: EC: Look up EC in DSDT
[    0.056222] ACPI: Interpreter enabled
[    0.056235] ACPI: (supports S0 S3 S4 S5)
[    0.056274] ACPI: Using PIC for interrupt routing
[    0.136592] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    0.145210] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.145301] ACPI: Power Resource [PFAN] (on)
[    0.146522] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.146531] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.147653] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.149795] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.149801] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.149807] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.149814] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.149819] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.149826] pci_root PNP0A03:00: host bridge window [mem 0x28000000-0xfebfffff] (ignored)
[    0.149976] pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[    0.149984] pci 0000:00:02.0: reg 14: [mem 0xe0000000-0xe007ffff]
[    0.149991] pci 0000:00:02.0: reg 18: [io  0x1800-0x1807]
[    0.150027] pci 0000:00:02.0: supports D1
[    0.150050] pci 0000:00:02.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.150058] pci 0000:00:02.1: reg 14: [mem 0xe0080000-0xe00fffff]
[    0.150086] pci 0000:00:02.1: supports D1
[    0.150167] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.150224] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.150281] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.150333] pci 0000:00:1d.7: reg 10: [mem 0xe0100000-0xe01003ff]
[    0.150389] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.150396] pci 0000:00:1d.7: PME# disabled
[    0.150489] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.150497] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.150524] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.150533] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.150543] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.150552] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.150561] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
[    0.150570] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.150625] pci 0000:00:1f.3: reg 20: [io  0x1880-0x189f]
[    0.150671] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.150680] pci 0000:00:1f.5: reg 14: [io  0x18c0-0x18ff]
[    0.150689] pci 0000:00:1f.5: reg 18: [mem 0xe0100c00-0xe0100dff]
[    0.150698] pci 0000:00:1f.5: reg 1c: [mem 0xe0100800-0xe01008ff]
[    0.150731] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.150737] pci 0000:00:1f.5: PME# disabled
[    0.150767] pci 0000:00:1f.6: reg 10: [io  0x2400-0x24ff]
[    0.150775] pci 0000:00:1f.6: reg 14: [io  0x2000-0x207f]
[    0.150815] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.150822] pci 0000:00:1f.6: PME# disabled
[    0.150871] pci 0000:02:03.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[    0.150877] pci 0000:02:03.0: MMC cards are now supported by standard SDHCI controller
[    0.150889] pci 0000:02:03.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.150909] pci 0000:02:03.0: supports D1 D2
[    0.150913] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150920] pci 0000:02:03.0: PME# disabled
[    0.150950] pci 0000:02:03.1: reg 10: [mem 0x00000000-0x00000fff]
[    0.150970] pci 0000:02:03.1: supports D1 D2
[    0.150974] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150981] pci 0000:02:03.1: PME# disabled
[    0.151022] pci 0000:02:03.2: reg 10: [mem 0xe0212000-0xe02127ff]
[    0.151067] pci 0000:02:03.2: PME# supported from D0 D3hot D3cold
[    0.151073] pci 0000:02:03.2: PME# disabled
[    0.151104] pci 0000:02:04.0: reg 10: [mem 0xe0210000-0xe0211fff]
[    0.151178] pci 0000:02:05.0: reg 10: [mem 0xe0200000-0xe020ffff 64bit]
[    0.151232] pci 0000:02:05.0: PME# supported from D3hot D3cold
[    0.151239] pci 0000:02:05.0: PME# disabled
[    0.151280] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.151288] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.151295] pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
[    0.151304] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.151310] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.151316] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.151360] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[    0.151394] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[    0.151408] pci_bus 0000:00: on NUMA node 0
[    0.151416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.151726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.157934] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[    0.158181] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.158408] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
[    0.158632] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[    0.158857] ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
[    0.159094] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled.
[    0.159322] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
[    0.159557] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[    0.159624] HEST: Table is not found!
[    0.159745] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.159763] vgaarb: loaded
[    0.159964] SCSI subsystem initialized
[    0.160075] libata version 3.00 loaded.
[    0.160204] usbcore: registered new interface driver usbfs
[    0.160238] usbcore: registered new interface driver hub
[    0.160287] usbcore: registered new device driver usb
[    0.160417] PCI: Using ACPI for IRQ routing
[    0.160452] PCI: pci_cache_line_size set to 64 bytes
[    0.160543] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.160549] reserve RAM buffer: 000000002767e000 - 0000000027ffffff 
[    0.160748] NetLabel: Initializing
[    0.160752] NetLabel:  domain hash size = 128
[    0.160756] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.160781] NetLabel:  unlabeled traffic allowed by default
[    0.160808] Switching to clocksource tsc
[    0.184784] pnp: PnP ACPI init
[    0.184836] ACPI: bus type pnp registered
[    0.215375] pnp 00:00: [bus 00-ff]
[    0.215383] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.215388] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.215393] pnp 00:00: [io  0x0d00-0xffff window]
[    0.215399] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.215404] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.215409] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.215414] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.215419] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.215425] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.215430] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.215435] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.215440] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.215445] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.215451] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.215456] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.215461] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.215466] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.215472] pnp 00:00: [mem 0x28000000-0xfebfffff window]
[    0.215476] pnp 00:00: [mem 0x00000000 window]
[    0.215604] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.216176] pnp 00:01: [io  0x0070-0x0077]
[    0.216181] ERROR: Unable to locate IOAPIC for GSI 8
[    0.216234] pnp 00:01: [irq 8]
[    0.216294] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.216317] pnp 00:02: [io  0x00f0]
[    0.216321] ERROR: Unable to locate IOAPIC for GSI 13
[    0.216364] pnp 00:02: [irq 13]
[    0.216421] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.216445] pnp 00:03: [io  0x0000-0x001f]
[    0.216449] pnp 00:03: [io  0x0081-0x008f]
[    0.216454] pnp 00:03: [io  0x0090-0x0091]
[    0.216458] pnp 00:03: [io  0x0093-0x009f]
[    0.216463] pnp 00:03: [io  0x00c0-0x00df]
[    0.216467] pnp 00:03: [dma 4]
[    0.216523] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.216550] pnp 00:04: [io  0x002e-0x002f]
[    0.216554] pnp 00:04: [io  0x0061]
[    0.216558] pnp 00:04: [io  0x0063]
[    0.216562] pnp 00:04: [io  0x0065]
[    0.216566] pnp 00:04: [io  0x0067]
[    0.216578] pnp 00:04: [io  0x0080]
[    0.216582] pnp 00:04: [io  0x0092]
[    0.216586] pnp 00:04: [io  0x00b2-0x00b3]
[    0.216591] pnp 00:04: [io  0x0600-0x060f]
[    0.216595] pnp 00:04: [io  0x0700-0x070f]
[    0.216599] pnp 00:04: [io  0x0800-0x080f]
[    0.216604] pnp 00:04: [io  0x1000-0x107f]
[    0.216608] pnp 00:04: [io  0x1180-0x11bf]
[    0.216613] pnp 00:04: [mem 0xfec10000-0xfec1ffff]
[    0.216747] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.216768] pnp 00:05: [mem 0xff800000-0xffffffff]
[    0.216825] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.218835] pnp 00:06: [io  0x02f8-0x02ff]
[    0.218840] ERROR: Unable to locate IOAPIC for GSI 3
[    0.218884] pnp 00:06: [irq 3]
[    0.219085] pnp 00:06: Plug and Play ACPI device, IDs PNP0510 (active)
[    0.220091] pnp 00:07: [io  0x0060]
[    0.220095] pnp 00:07: [io  0x0064]
[    0.220099] ERROR: Unable to locate IOAPIC for GSI 1
[    0.220142] pnp 00:07: [irq 1]
[    0.220216] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.220237] ERROR: Unable to locate IOAPIC for GSI 12
[    0.220281] pnp 00:08: [irq 12]
[    0.220343] pnp 00:08: Plug and Play ACPI device, IDs SYN0002 PNP0f13 (active)
[    0.220425] pnp: PnP ACPI: found 9 devices
[    0.220429] ACPI: ACPI bus type pnp unregistered
[    0.220461] system 00:04: [io  0x0600-0x060f] has been reserved
[    0.220467] system 00:04: [io  0x0700-0x070f] has been reserved
[    0.220473] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.220479] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.220485] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.220493] system 00:04: [mem 0xfec10000-0xfec1ffff] has been reserved
[    0.258726] pci 0000:00:1e.0: BAR 15: assigned [mem 0x28000000-0x2fffffff pref]
[    0.258734] pci 0000:00:1e.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.258740] pci 0000:00:1f.1: BAR 5: assigned [mem 0x30000000-0x300003ff]
[    0.258751] pci 0000:00:1f.1: BAR 5: set to [mem 0x30000000-0x300003ff] (PCI address [0x30000000-0x300003ff]
[    0.258762] pci 0000:02:03.0: BAR 15: assigned [mem 0x28000000-0x2bffffff pref]
[    0.258769] pci 0000:02:03.0: BAR 16: assigned [mem 0x34000000-0x37ffffff]
[    0.258775] pci 0000:02:03.1: BAR 15: assigned [mem 0x2c000000-0x2fffffff pref]
[    0.258782] pci 0000:02:03.1: BAR 16: assigned [mem 0x38000000-0x3bffffff]
[    0.258788] pci 0000:02:03.0: BAR 0: assigned [mem 0xe0213000-0xe0213fff]
[    0.258796] pci 0000:02:03.0: BAR 0: set to [mem 0xe0213000-0xe0213fff] (PCI address [0xe0213000-0xe0213fff]
[    0.258803] pci 0000:02:03.1: BAR 0: assigned [mem 0xe0214000-0xe0214fff]
[    0.258811] pci 0000:02:03.1: BAR 0: set to [mem 0xe0214000-0xe0214fff] (PCI address [0xe0214000-0xe0214fff]
[    0.258818] pci 0000:02:03.0: BAR 13: assigned [io  0x3000-0x30ff]
[    0.258824] pci 0000:02:03.0: BAR 14: assigned [io  0x3400-0x34ff]
[    0.258830] pci 0000:02:03.1: BAR 13: assigned [io  0x3800-0x38ff]
[    0.258835] pci 0000:02:03.1: BAR 14: assigned [io  0x3c00-0x3cff]
[    0.258841] pci 0000:02:03.0: CardBus bridge to [bus 03-06]
[    0.258845] pci 0000:02:03.0:   bridge window [io  0x3000-0x30ff]
[    0.258852] pci 0000:02:03.0:   bridge window [io  0x3400-0x34ff]
[    0.258859] pci 0000:02:03.0:   bridge window [mem 0x28000000-0x2bffffff pref]
[    0.258867] pci 0000:02:03.0:   bridge window [mem 0x34000000-0x37ffffff]
[    0.258874] pci 0000:02:03.1: CardBus bridge to [bus 07-0a]
[    0.258879] pci 0000:02:03.1:   bridge window [io  0x3800-0x38ff]
[    0.258886] pci 0000:02:03.1:   bridge window [io  0x3c00-0x3cff]
[    0.258893] pci 0000:02:03.1:   bridge window [mem 0x2c000000-0x2fffffff pref]
[    0.258900] pci 0000:02:03.1:   bridge window [mem 0x38000000-0x3bffffff]
[    0.258907] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.258913] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.258921] pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
[    0.258929] pci 0000:00:1e.0:   bridge window [mem 0x28000000-0x2fffffff pref]
[    0.258950] pci 0000:00:1e.0: setting latency timer to 64
[    0.258962] pci 0000:02:03.0: enabling device (0000 -> 0003)
[    0.259260] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.259266] PCI: setting IRQ 10 as level-triggered
[    0.259274] pci 0000:02:03.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    0.259283] pci 0000:02:03.0: setting latency timer to 64
[    0.259295] pci 0000:02:03.1: enabling device (0000 -> 0003)
[    0.259528] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    0.259535] pci 0000:02:03.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    0.259544] pci 0000:02:03.1: setting latency timer to 64
[    0.259551] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.259557] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.259562] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.259568] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff]
[    0.259573] pci_bus 0000:02: resource 2 [mem 0x28000000-0x2fffffff pref]
[    0.259578] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.259583] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.259589] pci_bus 0000:03: resource 0 [io  0x3000-0x30ff]
[    0.259593] pci_bus 0000:03: resource 1 [io  0x3400-0x34ff]
[    0.259599] pci_bus 0000:03: resource 2 [mem 0x28000000-0x2bffffff pref]
[    0.259604] pci_bus 0000:03: resource 3 [mem 0x34000000-0x37ffffff]
[    0.259609] pci_bus 0000:07: resource 0 [io  0x3800-0x38ff]
[    0.259614] pci_bus 0000:07: resource 1 [io  0x3c00-0x3cff]
[    0.259619] pci_bus 0000:07: resource 2 [mem 0x2c000000-0x2fffffff pref]
[    0.259625] pci_bus 0000:07: resource 3 [mem 0x38000000-0x3bffffff]
[    0.259681] NET: Registered protocol family 2
[    0.259746] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.259985] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.261737] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.262854] TCP: Hash tables configured (established 131072 bind 65536)
[    0.262862] TCP reno registered
[    0.262873] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.262914] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.263204] NET: Registered protocol family 1
[    0.263247] pci 0000:00:02.0: Boot video device
[    0.263375] PCI: CLS 32 bytes, default 64
[    0.263517] Trying to unpack rootfs image as initramfs...
[    0.967650] Freeing initrd memory: 12020k freed
[    0.980940] Simple Boot Flag at 0x38 set to 0x1
[    0.981476] apm: BIOS not found.
[    0.981759] audit: initializing netlink socket (disabled)
[    0.981789] type=2000 audit(1313918553.980:1): initialized
[    1.006276] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.009698] VFS: Disk quotas dquot_6.5.2
[    1.009803] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.010920] msgmni has been set to 1225
[    1.011062] SELinux:  Registering netfilter hooks
[    1.011578] alg: No test for stdrng (krng)
[    1.011700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.011707] io scheduler noop registered
[    1.011711] io scheduler deadline registered
[    1.011744] io scheduler cfq registered (default)
[    1.012161] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.012205] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.012209] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.024135] ACPI: AC Adapter [ADP1] (on-line)
[    1.024309] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.034076] ACPI: Lid Switch [LID0]
[    1.034193] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.034202] ACPI: Sleep Button [SLPB]
[    1.034311] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.034319] ACPI: Power Button [PWRB]
[    1.034451] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.034458] ACPI: Power Button [PWRF]
[    1.034678] ACPI: Fan [FAN0] (on)
[    1.034946] ACPI: acpi_idle registered with cpuidle
[    1.035128] Marking TSC unstable due to TSC halts in idle
[    1.035575] Switching to clocksource acpi_pm
[    1.129192] thermal LNXTHERM:01: registered as thermal_zone0
[    1.129211] ACPI: Thermal Zone [THRM] (47 C)
[    1.129235] ERST: Table is not found!
[    1.129282] isapnp: Scanning for PnP cards...
[    1.484937] isapnp: No Plug & Play device found
[    1.485396] Non-volatile memory driver v1.3
[    1.485401] Linux agpgart interface v0.103
[    1.485551] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    1.486065] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[    1.487965] agpgart-intel 0000:00:00.0: AGP aperture is 128M at 0xe8000000
[    1.488298] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.519615] ACPI: Battery Slot [BAT1] (battery present)
[    1.529096] ACPI: Battery Slot [BAT2] (battery absent)
[    1.773463] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.773901] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    1.773911] serial 0000:00:1f.6: PCI INT B disabled
[    1.776463] brd: module loaded
[    1.777707] loop: module loaded
[    1.777913] ata_piix 0000:00:1f.1: version 2.13
[    1.777928] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.778228] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    1.778233] PCI: setting IRQ 11 as level-triggered
[    1.778240] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    1.778301] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.778429] scsi0 : ata_piix
[    1.778591] scsi1 : ata_piix
[    1.779571] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.779577] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.779715] Fixed MDIO Bus: probed
[    1.779831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.780121] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[    1.780128] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[    1.780154] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.780160] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.780272] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.784208] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.784360] ata2: port disabled. ignoring.
[    1.784388] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
[    1.794045] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.794092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.794098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.794103] usb usb1: Product: EHCI Host Controller
[    1.794107] usb usb1: Manufacturer: Linux 2.6.35.13-92.fc14.i686 ehci_hcd
[    1.794112] usb usb1: SerialNumber: 0000:00:1d.7
[    1.794322] hub 1-0:1.0: USB hub found
[    1.794332] hub 1-0:1.0: 6 ports detected
[    1.794472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.794501] uhci_hcd: USB Universal Host Controller Interface driver
[    1.794553] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    1.794563] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.794569] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.794650] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.794678] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
[    1.794739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.794744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.794749] usb usb2: Product: UHCI Host Controller
[    1.794754] usb usb2: Manufacturer: Linux 2.6.35.13-92.fc14.i686 uhci_hcd
[    1.794758] usb usb2: SerialNumber: 0000:00:1d.0
[    1.794948] hub 2-0:1.0: USB hub found
[    1.794956] hub 2-0:1.0: 2 ports detected
[    1.795338] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    1.795345] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    1.795355] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.795361] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.795444] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.795471] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[    1.795524] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.795530] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.795535] usb usb3: Product: UHCI Host Controller
[    1.795539] usb usb3: Manufacturer: Linux 2.6.35.13-92.fc14.i686 uhci_hcd
[    1.795544] usb usb3: SerialNumber: 0000:00:1d.1
[    1.795741] hub 3-0:1.0: USB hub found
[    1.795749] hub 3-0:1.0: 2 ports detected
[    1.795859] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    1.795869] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.795875] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.795946] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.795972] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[    1.796048] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.796054] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.796059] usb usb4: Product: UHCI Host Controller
[    1.796063] usb usb4: Manufacturer: Linux 2.6.35.13-92.fc14.i686 uhci_hcd
[    1.796068] usb usb4: SerialNumber: 0000:00:1d.2
[    1.796267] hub 4-0:1.0: USB hub found
[    1.796275] hub 4-0:1.0: 2 ports detected
[    1.796485] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.799242] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.801276] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.801288] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.801346] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.801404] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.801453] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.801618] mice: PS/2 mouse device common for all mice
[    1.802122] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.802145] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    1.802384] device-mapper: uevent: version 1.0.3
[    1.802595] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: 
[    1.802847] cpuidle: using governor ladder
[    1.802959] cpuidle: using governor menu
[    1.803407] usbcore: registered new interface driver hiddev
[    1.803433] usbcore: registered new interface driver usbhid
[    1.803436] usbhid: USB HID core driver
[    1.803478] nf_conntrack version 0.5.0 (9807 buckets, 39228 max)
[    1.803720] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    1.803725] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    1.803729] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    1.803883] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.803909] TCP cubic registered
[    1.803913] Initializing XFRM netlink socket
[    1.803933] NET: Registered protocol family 17
[    1.803987] Using IPI No-Shortcut mode
[    1.804183] PM: Resume from disk failed.
[    1.804205] registered taskstats version 1
[    1.804524]   Magic number: 7:366:374
[    1.804641] acpi LNXVIDEO:00: hash matches
[    1.804689] rtc_cmos 00:01: setting system clock to 2011-08-21 09:22:35 UTC (1313918555)
[    1.804755] Initalizing network drop monitor service
[    1.824840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.954565] ata1.00: ATA-6: FUJITSU MHT2040AH, 006C, max UDMA/100
[    1.954572] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.976473] ata1.00: configured for UDMA/100
[    1.976677] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2040A 006C PQ: 0 ANSI: 5
[    1.976954] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.977139] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.977245] sd 0:0:0:0: [sda] Write Protect is off
[    1.977251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.977298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.977639]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    2.015320] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.015346] Freeing unused kernel memory: 544k freed
[    2.015853] Write protecting the kernel text: 3772k
[    2.015961] Write protecting the kernel read-only data: 1836k
[    2.040743] dracut: dracut-006-6.fc14
[    2.050703] dracut: rd_NO_LUKS: removing cryptoluks activation
[    2.052418] dracut: rd_NO_LVM: removing LVM activation
[    2.069154] udev[69]: starting version 161
[    2.155329] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    2.156350] acpi device:04: registered as cooling_device2
[    2.157468] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[    2.157644] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    2.237494] [drm] Initialized drm 1.1.0 20060810
[    2.305426] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    2.305437] i915 0000:00:02.0: setting latency timer to 64
[    2.311452] [drm] set up 7M of stolen space
[    2.443079] [drm] initialized overlay support
[    2.859246] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0/0x0
[    2.860108] fbcon: inteldrmfb (fb0) is primary device
[    2.895478] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[    3.389699] Console: switching to colour frame buffer device 128x48
[    3.397439] fb0: inteldrmfb frame buffer device
[    3.397442] drm: registered panic notifier
[    3.397457] Slow work thread pool: Starting up
[    3.397532] Slow work thread pool: Ready
[    3.397547] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.436342] dracut: Starting plymouth daemon
[    3.836164] dracut: rd_NO_DM: removing DM RAID activation
[    3.843572] dracut: rd_NO_MD: removing MD RAID activation
[    4.275528] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:014f]
[    4.399600] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x00b8, PCI irq 10
[    4.399608] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[    4.399615] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[    4.399634] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[    4.399641] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[    4.402583] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe02fffff]
[    4.402591] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe021ffff
[    4.402618] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [mem 0x28000000-0x2fffffff pref]
[    4.402624] pcmcia_socket pcmcia_socket0: cs: memory probe 0x28000000-0x2fffffff: excluding 0x28000000-0x2fffffff
[    4.403430] yenta_cardbus 0000:02:03.1: CardBus bridge found [1028:014f]
[    4.526153] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x00b8, PCI irq 10
[    4.526161] yenta_cardbus 0000:02:03.1: Socket status: 30000006
[    4.526169] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[    4.526188] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[    4.526195] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff
[    4.528878] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe02fffff]
[    4.528885] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe021ffff
[    4.528912] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [mem 0x28000000-0x2fffffff pref]
[    4.528919] pcmcia_socket pcmcia_socket1: cs: memory probe 0x28000000-0x2fffffff: excluding 0x28000000-0x2fffffff
[    4.529852] firewire_ohci 0000:02:03.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    4.590053] firewire_ohci: Added fw-ohci device 0000:02:03.2, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
[    4.836443] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.909497] dracut: Mounted root filesystem /dev/sda2
[    5.039477] dracut: Loading SELinux policy
[    5.089256] firewire_core: created device fw0: GUID 00065b4004ed871f, S400
[    5.367460] SELinux:  Disabled at runtime.
[    5.367512] SELinux:  Unregistering netfilter hooks
[    5.367530] type=1404 audit(1313918559.062:2): selinux=0 auid=4294967295 ses=4294967295
[    5.424640] dracut: /sbin/load_policy: Can't load policy: No such file or directory
[    5.578627] dracut: Switching root
[    7.601057] udev[360]: starting version 161
[    8.507889] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    8.779665] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.908799] intel_rng: FWH not detected
[    9.026680] iTCO_vendor_support: vendor-support=0
[    9.141395] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    9.142388] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[    9.143092] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.179586] tg3.c:v3.110 (April 9, 2010)
[    9.179618] tg3 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    9.257728] tg3 0000:02:05.0: eth0: Tigon3 [partno(BCM95705A50) rev 3001] (PCI:33MHz:32-bit) MAC address 00:0b:db:e4:1f:2c
[    9.257739] tg3 0000:02:05.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    9.257746] tg3 0000:02:05.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    9.257752] tg3 0000:02:05.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[    9.876009] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[    9.876089] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   10.694044] intel8x0_measure_ac97_clock: measured 50344 usecs (2427 samples)
[   10.694051] intel8x0: clocking to 48000
[   10.695511] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[   10.695544] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[   10.797079] ALSA sound/pci/ac97/ac97_codec.c:2173: MC'97 1 converters and GPIO not ready (0xff00)
[   12.565213] EXT4-fs (sda2): re-mounted. Opts: (null)
[   12.768412] EXT3-fs: barriers not enabled
[   12.768725] kjournald starting.  Commit interval 5 seconds
[   12.769155] EXT3-fs (sda3): using internal journal
[   12.769164] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   13.525048] Adding 514044k swap on /dev/sda1.  Priority:-1 extents:1 across:514044k 
[   14.387379] NET: Registered protocol family 10
[   14.387775] lo: Disabled Privacy Extensions
[   14.409728] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.460616] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.671163] RPC: Registered udp transport module.
[   19.671170] RPC: Registered tcp transport module.
[   19.671174] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.614468] Bridge firewalling registered
[   25.305126] Ebtables v2.0 registered
[   26.366857] lo: Disabled Privacy Extensions
[  335.429845] tg3 0000:02:05.0: eth0: Link is up at 100 Mbps, half duplex
[  335.429859] tg3 0000:02:05.0: eth0: Flow control is off for TX and off for RX
[  335.430869] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  345.890086] eth0: no IPv6 routers present
[  477.820729] TCP lp registered
[  635.282141] packagekitd[2117]: segfault at 8 ip 003d9d92 sp bfe58c8c error 4 in libc-2.13.so[399000+183000]
[  761.300294] lib80211: common routines for IEEE802.11 drivers
[  761.300301] lib80211_crypt: registered algorithm 'NULL'
[  761.543391] cfg80211: Calling CRDA to update world regulatory domain
[  761.737399] libipw: 802.11 data/management/control stack, git-1.1.13
[  761.737405] libipw: Copyright (C) 2004-2005 Intel Corporation 
[  761.798669] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[  761.798676] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[  762.208755] cfg80211: World regulatory domain updated:
[  762.208767]     (start_freq - end_freq at bandwidth), (max_antenna_gain, max_eirp)
[  762.208780]     (2402000 KHz - 2472000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[  762.208792]     (2457000 KHz - 2482000 KHz at 20000 KHz), (300 mBi, 2000 mBm)
[  762.208804]     (2474000 KHz - 2494000 KHz at 20000 KHz), (300 mBi, 2000 mBm)
[  762.208815]     (5170000 KHz - 5250000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[  762.208827]     (5735000 KHz - 5835000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 1215.216660] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1215.216668] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 1215.218066] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-ipw2200 instead
[ 1234.017362] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-ipw2200 instead
[ 1234.027447] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-ipw2200 instead
[ 1647.280713] lib80211_crypt: unregistered algorithm 'NULL'
[ 1647.293083] lib80211: common routines for IEEE802.11 drivers
[ 1647.293090] lib80211_crypt: registered algorithm 'NULL'
[ 1647.353168] cfg80211: Calling CRDA to update world regulatory domain
[ 1647.373795] libipw: 802.11 data/management/control stack, git-1.1.13
[ 1647.373803] libipw: Copyright (C) 2004-2005 Intel Corporation 
[ 1647.397200] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1647.397206] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 1647.814059] cfg80211: World regulatory domain updated:
[ 1647.814069]     (start_freq - end_freq at bandwidth), (max_antenna_gain, max_eirp)
[ 1647.814083]     (2402000 KHz - 2472000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 1647.814095]     (2457000 KHz - 2482000 KHz at 20000 KHz), (300 mBi, 2000 mBm)
[ 1647.814107]     (2474000 KHz - 2494000 KHz at 20000 KHz), (300 mBi, 2000 mBm)
[ 1647.814118]     (5170000 KHz - 5250000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 1647.814130]     (5735000 KHz - 5835000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 1944.923135] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1944.923142] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 3622.340289] fuse init (API version 7.14)
[ 4473.622053] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 4473.622060] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 6781.471751] lib80211_crypt: unregistered algorithm 'NULL'
[ 6813.623889] lib80211: common routines for IEEE802.11 drivers
[ 6813.623898] lib80211_crypt: registered algorithm 'NULL'
[ 6813.834969] cfg80211: Calling CRDA to update world regulatory domain
[ 6813.914162] libipw: 802.11 data/management/control stack, git-1.1.13
[ 6813.914168] libipw: Copyright (C) 2004-2005 Intel Corporation 
[ 6814.013165] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 6814.013172] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 6814.499092] cfg80211: World regulatory domain updated:
[ 6814.499108]     (start_freq - end_freq at bandwidth), (max_antenna_gain, max_eirp)
[ 6814.499121]     (2402000 KHz - 2472000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 6814.499133]     (2457000 KHz - 2482000 KHz at 20000 KHz), (300 mBi, 2000 mBm)
[ 6814.499145]     (2474000 KHz - 2494000 KHz at 20000 KHz), (300 mBi, 2000 mBm)
[ 6814.499156]     (5170000 KHz - 5250000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 6814.499168]     (5735000 KHz - 5835000 KHz at 40000 KHz), (300 mBi, 2000 mBm)
[ 7013.629837] npviewer.bin[2075]: segfault at b54e904c ip 0264edc7 sp bffce7c0 error 4 in libflashplayer.so[22b0000+b2c000]
[ 9019.222871] npviewer.bin[4424]: segfault at 418 ip 05f03b66 sp bfa9d158 error 6 in libflashplayer.so[5cb5000+b2c000]

[HROAdmin26]

Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)

You have a Broadcom wireless NIC. The ipw2200 driver is for Intel NIC's. Google for your version of Fedora and "[14e4:4320]" to find configuration info.