lenovo wireless firmware

[salmonila]

Hi guys,I installed fedora 15 today and it's working fine except for the wireless connection(firmware is missing) it's using a broadcom b43 I'm not sure of the exact model .so I tried to install 43xx driver but it didn't work ,any thoughts

[jayd512]

It may be more than we actually need, but check this page: http://www.linuxforums.org/forum/wir...tart-here.html

Post back here with the requested results.

[Rubberman]

To install the firmware you need to install and run the b43-fwcutter package. If it's already installed, you should see the executable /usr/bin/b43-fwcutter.

[salmonila]

the b43-fwcutter is already installed


[root@badassgeek badassgeek]# lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Lenovo Device [17aa:3a00]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Subsystem: Lenovo Device [17aa:3a02]
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Lenovo Device [17aa:3a02]
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
Subsystem: Lenovo Device [17aa:3a09]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
Subsystem: Lenovo Device [17aa:3a0a]
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
Subsystem: Lenovo Device [17aa:3a0b]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
Subsystem: Lenovo Device [17aa:3a0c]
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Lenovo Device [17aa:3a0d]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
Subsystem: Lenovo Device [17aa:3a14]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
Subsystem: Lenovo Device [17aa:3a15]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
Subsystem: Lenovo Device [17aa:3a16]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
Subsystem: Lenovo Device [17aa:3a17]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Lenovo Device [17aa:3a19]
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller [8086:2928] (rev 03)
Subsystem: Lenovo Device [17aa:3a1a]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Lenovo Device [17aa:3a1d]
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller [8086:292d] (rev 03)
Subsystem: Lenovo Device [17aa:3a1e]
Kernel driver in use: ata_piix
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Lenovo Device [17aa:3a1f]
04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:04b5]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
07:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Lenovo IdeaPad S10e [17aa:3a23]
Kernel driver in use: tg3
Kernel modules: tg3



[root@badassgeek badassgeek]# lsmod
Module Size Used by
fuse 53420 3
8021q 15580 0
garp 4926 1 8021q
stp 1399 1 garp
llc 3684 2 garp,stp
cpufreq_ondemand 7674 2
acpi_cpufreq 6257 1
mperf 1145 1 acpi_cpufreq
ip6t_REJECT 3387 2
nf_conntrack_ipv6 6637 1
nf_defrag_ipv6 7574 1 nf_conntrack_ipv6
ip6table_filter 1227 1
ip6_tables 9798 1 ip6table_filter
snd_hda_codec_conexant 41002 1
arc4 1097 2
snd_hda_intel 20294 2
snd_hda_codec 69915 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 4986 1 snd_hda_codec
snd_seq 43761 0
b43 263886 0
btusb 12356 0
snd_seq_device 5118 1 snd_seq
mac80211 201962 1 b43
cfg80211 116073 2 b43,mac80211
bluetooth 77680 1 btusb
snd_pcm 63642 2 snd_hda_intel,snd_hda_codec
i2c_i801 7957 0
uvcvideo 49026 0
snd_timer 15551 2 snd_seq,snd_pcm
snd 48042 12 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec ,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_time r
tg3 97030 0
soundcore 5039 1 snd
snd_page_alloc 6112 2 snd_hda_intel,snd_pcm
iTCO_wdt 9288 0
ssb 40469 1 b43
ideapad_laptop 3898 0
joydev 7284 0
sparse_keymap 2650 1 ideapad_laptop
rfkill 13096 4 cfg80211,bluetooth,ideapad_laptop
videodev 54789 1 uvcvideo
iTCO_vendor_support 2082 1 iTCO_wdt
microcode 11108 0
mmc_core 61566 2 b43,ssb
ipv6 234769 17 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
i915 306255 3
drm_kms_helper 24432 1 i915
drm 152267 4 i915,drm_kms_helper
i2c_algo_bit 4214 1 i915
i2c_core 21384 6 i2c_i801,videodev,i915,drm_kms_helper,drm,i2c_algo _bit
video 10797 1 i915




[ 0.668097] intel_idle: does not run on family 6 model 23
[ 0.670025] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.672038] ACPI: AC Adapter [ACAD] (on-line)
[ 0.672130] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.679016] ACPI: Lid Switch [LID0]
[ 0.679071] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.679075] ACPI: Power Button [PWRB]
[ 0.679131] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.679134] ACPI: Sleep Button [SLPB]
[ 0.679200] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.679203] ACPI: Power Button [PWRF]
[ 0.679412] ACPI: acpi_idle registered with cpuidle
[ 0.685719] Monitor-Mwait will be used to enter C-1 state
[ 0.685751] Monitor-Mwait will be used to enter C-2 state
[ 0.685759] Marking TSC unstable due to TSC halts in idle
[ 0.713111] ACPI: Invalid active0 threshold
[ 0.715032] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.715035] ACPI: Thermal Zone [TZ00] (34 C)
[ 0.715049] ERST: Table is not found!
[ 0.715081] isapnp: Scanning for PnP cards...
[ 0.854139] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.854145] ACPI: Battery Slot [BAT1] (battery present)
[ 1.072532] isapnp: No Plug & Play device found
[ 1.072614] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.073397] Non-volatile memory driver v1.3
[ 1.073399] Linux agpgart interface v0.103
[ 1.073552] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.073695] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.074749] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.074883] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.077254] brd: module loaded
[ 1.077950] loop: module loaded
[ 1.078083] ata_piix 0000:00:1f.2: version 2.13
[ 1.078098] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.078104] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.078148] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.078481] scsi0 : ata_piix
[ 1.078593] scsi1 : ata_piix
[ 1.078657] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
[ 1.078662] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
[ 1.078682] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.078688] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.229055] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.229346] scsi2 : ata_piix
[ 1.229429] scsi3 : ata_piix
[ 1.229490] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
[ 1.229495] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
[ 1.229577] Fixed MDIO Bus: probed
[ 1.229640] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.229660] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.229675] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.229679] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.229739] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.229811] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.233695] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.233711] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf4905000
[ 1.243018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.243058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.243061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.243063] usb usb1: Product: EHCI Host Controller
[ 1.243066] usb usb1: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ehci_hcd
[ 1.243068] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.243188] hub 1-0:1.0: USB hub found
[ 1.243192] hub 1-0:1.0: 6 ports detected
[ 1.243289] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.243303] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.243306] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.243356] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.243409] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.247305] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.247322] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4905400
[ 1.257018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.257054] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.257057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.257059] usb usb2: Product: EHCI Host Controller
[ 1.257061] usb usb2: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ehci_hcd
[ 1.257064] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.257175] hub 2-0:1.0: USB hub found
[ 1.257179] hub 2-0:1.0: 6 ports detected
[ 1.257276] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.257291] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.257318] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.257325] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.257329] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.257375] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.257432] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.257468] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.257471] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.257473] usb usb3: Product: UHCI Host Controller
[ 1.257475] usb usb3: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd
[ 1.257478] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.257589] hub 3-0:1.0: USB hub found
[ 1.257593] hub 3-0:1.0: 2 ports detected
[ 1.257682] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.257689] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.257693] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.257742] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.257799] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.257835] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.257838] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.257840] usb usb4: Product: UHCI Host Controller
[ 1.257842] usb usb4: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd
[ 1.257845] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.257955] hub 4-0:1.0: USB hub found
[ 1.257959] hub 4-0:1.0: 2 ports detected
[ 1.258056] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.258063] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.258067] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.258112] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.258158] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860
[ 1.258192] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.258195] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.258198] usb usb5: Product: UHCI Host Controller
[ 1.258200] usb usb5: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd
[ 1.258202] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.258310] hub 5-0:1.0: USB hub found
[ 1.258314] hub 5-0:1.0: 2 ports detected
[ 1.258400] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.258407] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.258410] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.258458] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.258505] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.258539] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.258542] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.258545] usb usb6: Product: UHCI Host Controller
[ 1.258547] usb usb6: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd
[ 1.258549] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.258656] hub 6-0:1.0: USB hub found
[ 1.258660] hub 6-0:1.0: 2 ports detected
[ 1.258745] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.258751] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.258755] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.258807] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.258853] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.258888] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.258891] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.258893] usb usb7: Product: UHCI Host Controller
[ 1.258895] usb usb7: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd
[ 1.258897] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.259021] hub 7-0:1.0: USB hub found
[ 1.259025] hub 7-0:1.0: 2 ports detected
[ 1.259112] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.259119] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.259123] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.259174] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.259229] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.259266] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.259269] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.259271] usb usb8: Product: UHCI Host Controller
[ 1.259273] usb usb8: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 uhci_hcd
[ 1.259275] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.259388] hub 8-0:1.0: USB hub found
[ 1.259392] hub 8-0:1.0: 2 ports detected
[ 1.259532] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.323748] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.323754] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.323871] mousedev: PS/2 mouse device common for all mice
[ 1.326777] rtc_cmos 00:06: RTC can wake from S4
[ 1.330072] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.330104] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.330189] device-mapper: uevent: version 1.0.3
[ 1.330276] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.330369] cpuidle: using governor ladder
[ 1.330456] cpuidle: using governor menu
[ 1.330633] usbcore: registered new interface driver usbhid
[ 1.330635] usbhid: USB HID core driver
[ 1.330654] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.330838] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.330852] TCP cubic registered
[ 1.330854] Initializing XFRM netlink socket
[ 1.330864] NET: Registered protocol family 17
[ 1.330880] Registering the dns_resolver key type
[ 1.330897] Using IPI No-Shortcut mode
[ 1.331014] PM: Hibernation image not present or could not be loaded.
[ 1.331026] registered taskstats version 1
[ 1.331129] IMA: No TPM chip found, activating TPM-bypass!
[ 1.331832] Magic number: 15:9:701
[ 1.331931] rtc_cmos 00:06: setting system clock to 2011-10-23 20:40:53 UTC (1319402453)
[ 1.331998] Initalizing network drop monitor service
[ 1.386915] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.545297] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.545353] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.545486] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.548417] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LC01, max UDMA/100
[ 1.553483] ata1.00: ATA-8: HITACHI HTS545032B9A300, PB3ZC61H, max UDMA/100
[ 1.553495] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.556315] ata2.00: configured for UDMA/100
[ 1.559503] ata1.00: configured for UDMA/100
[ 1.559724] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54503 PB3Z PQ: 0 ANSI: 5
[ 1.559982] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.559989] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.560052] sd 0:0:0:0: [sda] Write Protect is off
[ 1.560055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.560084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.561339] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LC01 PQ: 0 ANSI: 5
[ 1.568888] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.568891] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.568997] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.569087] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.580368] sda: sda1 sda2
[ 1.580659] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.698104] usb 2-3: new high speed USB device using ehci_hcd and address 3
[ 1.932901] usb 2-3: New USB device found, idVendor=5986, idProduct=0148
[ 1.932906] usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 1.932911] usb 2-3: Product: Lenovo EasyCamera
[ 1.932915] usb 2-3: Manufacturer: Bison Electronics Inc.
[ 2.158426] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.239043] ata4: failed to resume link (SControl 0)
[ 2.250334] ata4: SATA link down (SStatus 4 SControl 0)
[ 2.250428] Freeing unused kernel memory: 568k freed
[ 2.250723] Write protecting the kernel text: 3956k
[ 2.250763] Write protecting the kernel read-only data: 1912k
[ 2.283947] dracut: dracut-009-10.fc15
[ 2.296035] dracut: rd.luks=0: removing cryptoluks activation
[ 2.306694] udev[119]: starting version 167
[ 2.321492] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2150
[ 2.321496] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.321499] usb 3-1: Product: BCM2046 Bluetooth Device
[ 2.321501] usb 3-1: Manufacturer: Broadcom Corp
[ 2.321503] usb 3-1: SerialNumber: F07BCBC278E2
[ 2.398704] [drm] Initialized drm 1.1.0 20060810
[ 2.431205] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.431210] i915 0000:00:02.0: setting latency timer to 64
[ 2.468036] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 2.468044] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.468046] [drm] Driver supports precise vblank timestamp query.
[ 2.530522] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 2.551878] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
[ 2.554253] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 2.554593] fixme: max PWM is zero.
[ 2.616884] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 2.693570] usb 6-2: New USB device found, idVendor=15d9, idProduct=0a4c
[ 2.693576] usb 6-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.693581] usb 6-2: Product: USB OPTICAL MOUSE
[ 2.710959] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input7
[ 2.711138] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
[ 2.901911] fbcon: inteldrmfb (fb0) is primary device
[ 2.910061] Console: switching to colour frame buffer device 170x48
[ 2.914863] fb0: inteldrmfb frame buffer device
[ 2.914865] drm: registered panic notifier
[ 2.925179] acpi device:08: registered as cooling_device2
[ 2.925522] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 2.925613] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.925799] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.938305] dracut: Starting plymouth daemon
[ 3.039030] dracut: rd.dm=0: removing DM RAID activation
[ 3.041947] dracut: rd.md=0: removing MD RAID activation
[ 3.409806] dracut: Scanning devices sda2 for LVM logical volumes vg_badassgeek/lv_root vg_badassgeek/lv_swap
[ 3.422096] dracut: inactive '/dev/vg_badassgeek/lv_swap' [4.91 GiB] inherit
[ 3.422197] dracut: inactive '/dev/vg_badassgeek/lv_home' [242.69 GiB] inherit
[ 3.422292] dracut: inactive '/dev/vg_badassgeek/lv_root' [50.00 GiB] inherit
[ 3.749730] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.827219] dracut: Checking filesystems
[ 3.827249] dracut: fsck -T -t noopts=_netdev -A -a
[ 3.890558] dracut: _Fedora-15-i686-: clean, 82459/3276800 files, 773742/13107200 blocks
[ 3.890702] dracut: Remounting /dev/mapper/vg_badassgeek-lv_root with -o ro,
[ 3.900649] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.912990] dracut: Mounted root filesystem /dev/mapper/vg_badassgeek-lv_root
[ 4.043815] dracut: Switching root
[ 4.511644] type=1404 audit(1319402456.678:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 4.689161] SELinux: 2048 avtab hash slots, 220448 rules.
[ 4.772522] SELinux: 2048 avtab hash slots, 220448 rules.
[ 5.065225] SELinux: 9 users, 13 roles, 3606 types, 191 bools, 1 sens, 1024 cats
[ 5.065230] SELinux: 81 classes, 220448 rules
[ 5.073530] SELinux: Completing initialization.
[ 5.073532] SELinux: Setting up existing superblocks.
[ 5.073540] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.073547] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 5.073564] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 5.073570] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 5.073579] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.073620] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 5.074173] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 5.074179] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 5.075633] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 5.075642] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 5.075646] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 5.075663] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.075682] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 5.075717] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 5.075746] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 5.075759] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 5.075765] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.076591] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.076604] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.076975] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 5.080216] type=1403 audit(1319402457.247:3): policy loaded auid=4294967295 ses=4294967295
[ 5.385058] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.385698] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.598986] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.602135] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.602548] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.605157] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.606091] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.606443] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.609143] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.610066] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.610431] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.670748] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 5.902891] NET: Registered protocol family 10
[ 5.918771] systemd[1]: Set hostname to <badassgeek>.
[ 7.076178] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 7.077498] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 7.077936] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 7.087156] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 7.087524] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 7.519830] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.535897] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 8.574446] udev[481]: starting version 167
[ 8.871891] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 8.871899] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 8.871964] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.955500] iTCO_vendor_support: vendor-support=0
[ 8.982964] Linux video capture interface: v2.00
[ 9.251255] input: Ideapad extra buttons as /devices/platform/ideapad/input/input9
[ 9.264130] mtp-probe[598]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2"
[ 9.407145] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.407163] b43-pci-bridge 0000:04:00.0: setting latency timer to 64
[ 9.412042] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 9.412151] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 9.412251] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.415288] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 9.415307] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 9.415325] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 9.415343] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 9.435187] mtp-probe[598]: bus: 6, device: 2 was not an MTP device
[ 9.440403] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
[ 9.456553] tg3.c:v3.116 (December 3, 2010)
[ 9.456611] tg3 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.456629] tg3 0000:07:00.0: setting latency timer to 64
[ 9.499381] tg3 0000:07:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 88:ae:1d:21:1a:78
[ 9.499385] tg3 0000:07:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 9.499389] tg3 0000:07:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 9.499392] tg3 0000:07:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 9.552794] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:014
[ 9.555284] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input10
[ 9.555368] usbcore: registered new interface driver uvcvideo
[ 9.555370] USB Video Class driver (v1.0.0)
[ 9.697695] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 9.697702] ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f]
[ 9.697704] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.829006] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 9.835289] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 9.919351] Bluetooth: Core ver 2.15
[ 9.920476] NET: Registered protocol family 31
[ 9.920479] Bluetooth: HCI device and connection manager initialized
[ 9.920482] Bluetooth: HCI socket layer initialized
[ 9.933809] cfg80211: Calling CRDA to update world regulatory domain
[ 10.257519] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.258454] usbcore: registered new interface driver btusb
[ 10.280160] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 10.563884] cfg80211: World regulatory domain updated:
[ 10.563888] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.563892] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.563895] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.563898] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.563901] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.563904] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.566052] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 10.566059] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 10.566075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.566154] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 10.566187] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.603030] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.603296] Registered led device: b43-phy0::tx
[ 10.603327] Registered led device: b43-phy0::rx
[ 10.603360] Registered led device: b43-phy0::radio
[ 10.603375] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 10.714129] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.714311] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.714406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.845417] Adding 5144572k swap on /dev/mapper/vg_badassgeek-lv_swap. Priority:0 extents:1 across:5144572k
[ 11.618944] cfg80211: Calling CRDA for country: EG
[ 11.623371] cfg80211: Regulatory domain changed to country: EG
[ 11.623374] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.623377] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.623380] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 11.623383] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 11.854715] systemd-fsck[751]: /dev/sda1: clean, 38/128016 files, 46836/512000 blocks
[ 12.041403] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.097484] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 13.189477] systemd-fsck[791]: /dev/mapper/vg_badassgeek-lv_home: clean, 441/15908864 files, 1059553/63619072 blocks
[ 13.477994] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 13.478022] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 16.903163] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.689421] auditd (947): /proc/947/oom_adj is deprecated, please use /proc/947/oom_score_adj instead.
[ 18.283083] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 18.283087] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 18.283091] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 18.287262] tg3 0000:07:00.0: irq 47 for MSI/MSI-X
[ 18.320577] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.755943] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 18.755946] All bugs added by David S. Miller <davem@redhat.com>
[ 19.930410] tg3 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 19.930410] tg3 0000:07:00.0: eth0: Flow control is on for TX and on for RX
[ 19.930410] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.706229] eth0: no IPv6 routers present
[ 42.096242] fuse init (API version 7.16)
[ 42.123292] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 42.144798] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts

[jayd512]

It's still not loading your firmware.
Did you try Rubbermans' suggestion of running /usr/bin/b43-fwcutter?
How did you install b43-fwcutter? For Fedora, it should just be:

su -
yum install b43-fwcutter wget

After it's finished, reboot. You should be good to go.