Find the answer to your Linux question:
Results 1 to 8 of 8
Hi.. newbie here. I'm using FC4 and I'm trying to burn FC6 ISO images to discs. I have 80min discs which should be sufficient for the ISO images but when ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Feb 2007
    Posts
    4

    Burning ISO images to DISC using cdrecord. HELP!


    Hi.. newbie here.
    I'm using FC4 and I'm trying to burn FC6 ISO images to discs.
    I have 80min discs which should be sufficient for the ISO images but when I try to burn the ISO images to disc using CDRECORD i receive these messages:

    cdrecord -v -eject speed=8 dev=ATA:1,1,0 FC-6-i386-disc1.iso
    cdrecord: No write mode specified.
    cdrecord: Asuming -tao mode.
    TOC Type: 1 = CD-ROM
    scsidev: 'ATA:1,1,0'
    devname: 'ATA'
    scsibus: 1 target: 1 lun: 0
    Linux sg driver version: 3.5.27
    Using libscg version 'schily-0.8'.
    cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
    SCSI buffer size: 64512
    atapi: -1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 1
    Vendor_info : 'ASUS '
    Identifikation : 'CRW-5232AS '
    Revision : '1.01'
    Device seems to be: Generic mmc CD-RW.
    Current: 0x000A
    Profile: 0x000A (current)
    Profile: 0x0009
    Profile: 0x0008
    Profile: 0x0002
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1951488 = 1905 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data 675 MB
    Total size: 776 MB (76:54.4 = 346086 sectors
    Lout start: 776 MB (76:56/36) = 346086 sectors
    Current Secsize: 2048
    ATIP info from disk:
    Indicated writing power: 5
    Reference speed: 2
    Is not unrestricted
    Is erasable
    ATIP start of lead in: -11615 (97:27/10)
    ATIP start of lead out: 335925 (74:41/00)
    1T speed low: 0 (reserved val 0) 1T speed high: 4
    2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
    power mult factor: 4 5
    recommended erase/write power: 3
    A1 values: 02 4A B0
    A2 values: 5C C6 26
    Disk type: Phase change
    Manuf. index: 18
    Manufacturer: Plasmon Data systems Ltd.
    Blocks total: 335925 Blocks current: 335925 Blocks remaining: -10161
    cdrecord: WARNING: Data may not fit on current disk.
    cdrecord: Notice: Use -overburn option to write more than the official disk capacity.
    cdrecord: Notice: Most CD-writers do overburning only on SAO or RAW


    Could anyone help? Is it a problem with the discs? they are 700mb/80min discs. Thanks.

  2. #2
    Just Joined!
    Join Date
    Feb 2006
    Posts
    10

    same problem

    I have never gotten over 750 Mb on a 800 mb disk...ever. I am not sure why this doesn't help you but I use the front end k3b for my iso burns and if it isn't under 750 it just doesn't work. I would love to see someone answer your question. and if you find out post it here

  3. #3
    Just Joined!
    Join Date
    Feb 2007
    Posts
    4

    Unhappy Additional..

    Another fact is that the ISO image files for FC6 doesn't even reach 700mb. So I would think that the disc would be more than enough. I do hope someone could provide a resolution or an alternative.

  4. $spacer_open
    $spacer_close
  5. #4
    Banned jan1024188's Avatar
    Join Date
    Jul 2006
    Location
    EU, SLOVENIA
    Posts
    1,549
    try burning the disk with k3b....

  6. #5
    Just Joined!
    Join Date
    Feb 2007
    Posts
    4

    Question k3b

    doesn't K3b use cdrecord to burn cd's? If it does, won't it have the same problems? I used Xroast to try and burn and had the same problems because it was also using cdrecord to some extent.

  7. #6
    Blackfooted Penguin daark.child's Avatar
    Join Date
    Apr 2006
    Location
    West Yorks
    Posts
    4,393
    Yes k3b uses cdrecord as a backend, so if you have problems with cdrecord, then its highly likely that you will have problems with k3b.

  8. #7
    Just Joined!
    Join Date
    Jan 2007
    Posts
    4

  9. #8
    Just Joined!
    Join Date
    Feb 2006
    Posts
    10

    burning iso

    I believe the problem lies with the filesystem burned onto the disk it requires space and eats space on the disk so a 800mb disk only will hold 700mb or less overburning is not a good idea just because it doesn't normally work
    that is my two cents try and make your iso smaller

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •