Find the answer to your Linux question:
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 25
Originally Posted by genesus what is the site, so we can try to get to it and see the error message? you mean my IP address? I don't have it ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Just Joined!
    Join Date
    Jul 2005
    Posts
    23

    Quote Originally Posted by genesus
    what is the site, so we can try to get to it and see the error message?
    you mean my IP address? I don't have it registered with any domain name and I'm a little hesitant at giving out my IP on open forums.

    From the people I know they are telling me the site takes long to load and is eventually unavailable.


  2. #12
    Just Joined!
    Join Date
    Jul 2005
    Posts
    23
    The site doesn't load at all from the Internet, several people pointed out it takes ages while loading and then big nothing. There's no error, the site simply refuses to load. I can see it however on my PC when I type my IP address (I put a sample index.html file in the default directory: var/www/html). Must be something wrong with the configuration?

    What are the important check points I have to go through to make sure I'm not missing some obvious, but not known to me steps?
    Please, I need more advice. Google help isn't helpful at all when half of the things they mention is meant for Apache gurus. Thanks a lot!

    Last but not least, is it possible to check by myself whether the site is visible from the Internet? How? (other than leaving my PC on, going to an Internet cafe and checking the address).

  3. #13
    Linux Engineer
    Join Date
    Oct 2004
    Location
    Vancouver
    Posts
    1,366
    if you remove the sample index.html from /var/www/html do you get the apache test page from the net?
    Operating System: GNU Emacs

  4. #14
    Linux Newbie deek's Avatar
    Join Date
    Mar 2005
    Location
    Fort Wayne, IN
    Posts
    248
    Well, it sounds to me that your external IP (the one that can get you to your server from the internet) is not forwarding your port 80.

    I am pretty sure you have a router, connected to your ISP/Cable Modem/DSL, right? That is your missing link. You just have to forward your port, doesn't have to be 80, but that is the default.

    The easiest way to check, whether on your PC or not, is to know your external IP (it likely won't be anything starting with 192.168.xxx.xxx, which are normally defaults for router DHCP). If you have that IP, then you can use your local browse to pull it up...if what you are saying is true, then you will experience the same thing your friends are.

    If you do already have port forwarding setup correctly, and are using something other than port 80, then your friends, or whoever, would have to type that port in the browser.

    Example:

    if you are using port 8080, then

    http://your-ip-address:8080, will have to be used to get to it. The browser will assume all URLs are at port 80...

    Hope that gives you more to go on!
    Join the Open Source Revolution. Support GNU/Linux.

    Find me at: www.deeksworld.com
    Registered GNU/Linux User #395777

  5. #15
    Just Joined!
    Join Date
    Jul 2005
    Posts
    23
    Quote Originally Posted by genesus
    if you remove the sample index.html from /var/www/html do you get the apache test page from the net?
    no, rarther:

    404 Not Found
    The requested URL /index.html was not found on this server.
    Apache-AdvancedExtranetServer/2.0.53 (Mandriva Linux/PREFORK-9.2.102mdk) mod_ssl/2.0.53 OpenSSL/0.9.7e PHP/4.3.10 mod_perl/1.999.21 Perl/v5.8.6 Server at times.com Port 443


    Quote Originally Posted by deek
    I am pretty sure you have a router, connected to your ISP/Cable Modem/DSL, right?
    Not sure about that. My PC connects to the Internet directly via a cable and ethernet card. I don't know anything about routers of my ISP.

    Seems like I need to try to set up port forwarding? But how does a noob like me even start that? I found some info on the net on what it is, but no sight of how to do it. Do I edit some conf file? Which one? How?

    My next question is about the correct IP address to use. I know there's an internal and external one. The external IP I found out by going to ipchicken.

    Is the internal IP located here?: MCC/Network & Internet/Reconfigure a network interface/Manage connections?

  6. #16
    Linux Newbie
    Join Date
    Jul 2005
    Location
    Turn Around
    Posts
    202
    external IP is what you give to the world

    if you have an internal ip you shold see it under 'inet address' when u type "ifconfig" as root usually it starts around 192.168.xxx.xxx

    im pretty sure if you dont have a router u dont need to worry about port forwarding.

  7. #17
    Linux Newbie deek's Avatar
    Join Date
    Mar 2005
    Location
    Fort Wayne, IN
    Posts
    248
    Correct, in your setup, you don't have a router. So don't worry about most of what I posted previously:)

    Well, it really now depends on your ISP and what ports are open. If port 80 is closed, you can setup your webserver to listen on a different port, but it has to be open. And, if you use a non-default port, any external users will have to type a colon (:) and the port address after your IP address...

    So, find out what ports are available first, and then make sure you are listening (webserver) on one of those ports...
    Join the Open Source Revolution. Support GNU/Linux.

    Find me at: www.deeksworld.com
    Registered GNU/Linux User #395777

  8. #18
    Just Joined!
    Join Date
    Jul 2005
    Posts
    23
    OK so here is the info:

    Port 80 is OPEN (I used: nmap -sT localhost).
    I don't need to set up port forwarding - as some of you said on here.
    My external IP is 83.16.xxx.xx
    My internal IP is 10.1.x.xxx

    When I type my internal IP into a browser I get the default Apache page. When I add /123.html to that IP address I get to see a test page with 123 on it.

    When I type my external IP into a browser I get (111) Error.

    When a person from the Internet tries to acces either internal or external address they can't see anything.

    What else am I missing? How much more confusing can it get? Please, enlighten me.
    Much appreciated!

  9. #19
    Linux Newbie deek's Avatar
    Join Date
    Mar 2005
    Location
    Fort Wayne, IN
    Posts
    248
    Can you post your apache http.conf file? Maybe we can see something in there to help.
    Join the Open Source Revolution. Support GNU/Linux.

    Find me at: www.deeksworld.com
    Registered GNU/Linux User #395777

  10. #20
    Just Joined!
    Join Date
    Jul 2005
    Posts
    23
    I found 2 files that have the same name, but are different. The first http.conf is from file:/etc/httpd/conf.
    The second one is from file:/usr/local/etc/httpd.

    Code:
    ### Main Configuration Section
    ### You really shouldn't change these settings unless you're a guru
    ###
    ServerType standalone
    ServerRoot /etc/httpd
    #ServerName localhost
    #LockFile /etc/httpd/httpd.lock
    PidFile /var/run/httpd.pid
    ScoreBoardFile /etc/httpd/httpd.scoreboard
    ErrorLog logs/error_log
    LogLevel warn
    ResourceConfig /dev/null
    AccessConfig /dev/null
    DocumentRoot /home/httpd/html
    
    
    ### Dynamic Shared Object (DSO) Support
    ### 
    ###
    #LoadModule mmap_static_module modules/mod_mmap_static.so
    LoadModule env_module         modules/mod_env.so
    LoadModule config_log_module  modules/mod_log_config.so
    LoadModule agent_log_module   modules/mod_log_agent.so
    LoadModule referer_log_module modules/mod_log_referer.so
    #LoadModule mime_magic_module  modules/mod_mime_magic.so
    LoadModule mime_module        modules/mod_mime.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule status_module      modules/mod_status.so
    LoadModule info_module        modules/mod_info.so
    LoadModule includes_module    modules/mod_include.so
    LoadModule autoindex_module   modules/mod_autoindex.so
    LoadModule dir_module         modules/mod_dir.so
    LoadModule cgi_module         modules/mod_cgi.so
    LoadModule asis_module        modules/mod_asis.so
    LoadModule imap_module        modules/mod_imap.so
    LoadModule action_module      modules/mod_actions.so
    #LoadModule speling_module     modules/mod_speling.so
    LoadModule userdir_module     modules/mod_userdir.so
    LoadModule proxy_module       modules/libproxy.so
    LoadModule alias_module       modules/mod_alias.so
    LoadModule rewrite_module     modules/mod_rewrite.so
    LoadModule access_module      modules/mod_access.so
    LoadModule auth_module        modules/mod_auth.so
    LoadModule anon_auth_module   modules/mod_auth_anon.so
    #LoadModule dbm_auth_module    modules/mod_auth_dbm.so
    #LoadModule db_auth_module     modules/mod_auth_db.so
    LoadModule digest_module      modules/mod_digest.so
    #LoadModule cern_meta_module   modules/mod_cern_meta.so
    LoadModule expires_module     modules/mod_expires.so
    LoadModule headers_module     modules/mod_headers.so
    LoadModule usertrack_module   modules/mod_usertrack.so
    #LoadModule example_module     modules/mod_example.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule unique_id_module   modules/mod_unique_id.so
    LoadModule setenvif_module    modules/mod_setenvif.so
    LoadModule vhost_alias_module	modules/mod_vhost_alias.so
    
    #  Reconstruction of the complete module list from all available modules
    #  (static and shared ones) to achieve correct module execution order.
    #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    #AddModule mod_mmap_static.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_log_agent.c
    AddModule mod_log_referer.c
    #AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    AddModule mod_status.c
    AddModule mod_info.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    #AddModule mod_speling.c
    AddModule mod_userdir.c
    AddModule mod_proxy.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_auth_anon.c
    #AddModule mod_auth_dbm.c
    #AddModule mod_auth_db.c
    AddModule mod_digest.c
    #AddModule mod_cern_meta.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_usertrack.c
    #AddModule mod_example.c
    #AddModule mod_log_forensic.c
    #AddModule mod_unique_id.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    AddModule mod_vhost_alias.c
    
    ###
    ### Global Configuration
    ###
    # We now support multiple apache configurations on the same server. In 
    # common.conf, we put all directives that are common to all implementations
    # (httpd, httpd-perl, etc.)
    Include conf/commonhttpd.conf
    
    
    ###
    ### IP Address/Port and Proxied configuration section
    ###
    # The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
    # are using a proxy or accelerator, like the Apache-SGI or khttpd, so that
    # the fast web server serves static content while Apache handles the 
    # cgi or php files
    
    #BindAddress 83.xx.xxx.xx
    <IfDefine APACHEPROXIED>
        Port 80
        Listen 80
    </IfDefine>
    <IfDefine !APACHEPROXIED>
    Listen 10.1.x.xxx&#58;80
    Listen *&#58;8080
    </IfDefine>
    
          User times
          Group times
    ServerAdmin times@times.com
    ServerName http&#58;//10.1.x.xxx
          DocumentRoot "/home/httpd/html"
    
          <Directory />
          Options None
          AllowOverride None
          Order deny,allow
          Deny from all
          </Directory>
    
          <Directory "/home/httpd/html">
          Options None
          AllowOverride None
          Order allow,deny
          Allow from all
          </Directory>
          
    
    # Likewise, we can set apache as the server by default and send perl
    # requests via ProxyPass to apache-mod_perl. It increases performance
    # since the perl interpreter is only used for perl and the standard apache
    # does all the html and image files, with a smaller footprint.
    #
    # If you install apache and apache-mod_perl, this is the default config.
    # If you don't want two web servers to use perl, uninstall apache, and
    # apache-mod_perl will not be proxied.
    
    <IfDefine PERLPROXIED>
        RewriteEngine on
        RewriteRule ^proxy&#58;.*  -  &#91;F&#93;
        RewriteRule ^&#40;.*\/perl\/.*&#41;$  http&#58;//%&#123;HTTP_HOST&#125;&#58;8200$1 &#91;P&#93;
        RewriteRule ^&#40;.*\/cgi-perl\/.*&#41;$  http&#58;//%&#123;HTTP_HOST&#125;&#58;8200$1 &#91;P&#93;
    </IfDefine>
    
    ###
    ### Log configuration Section
    ###
    
    #Single logfile with access, agent and referer information
    #This is the default, if vlogs are not defined for the main server
    CustomLog logs/access_log combined env=!VLOG
    #If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
    CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
    
    
    ###
    ### Virtual Hosts 
    ###
    # We include different templates for Virtual Hosting. Have a look in the 
    # vhosts directory and modify to suit your needs.
    Include conf/vhosts/Vhosts.conf
    #Include conf/vhosts/DynamicVhosts.conf
    #Include conf/vhosts/VirtualHomePages.conf
    
    
    ###
    ### Performance settings Section
    ###
    #
    # Timeout&#58; The number of seconds before receives and sends time out.
    #
    TimeOut 300
    
    #
    # KeepAlive&#58; Whether or not to allow persistent connections &#40;more than
    # one request per connection&#41;. Set to "Off" to deactivate.
    #
    KeepAlive on
    
    #
    # MaxKeepAliveRequests&#58; The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 100
    
    #
    # KeepAliveTimeout&#58; Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 15
    
    #
    # Server-pool size regulation.  Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes &#40;e.g., multiple simultaneous requests from a single
    # Netscape browser&#41;.
    #
    # It does this by periodically checking how many servers are waiting
    # for a request.  If there are fewer than MinSpareServers, it creates
    # a new spare.  If there are more than MaxSpareServers, some of the
    # spares die off.  The default values are probably OK for most sites.
    #
    MinSpareServers 4
    MaxSpareServers 10
    
    #
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    #
    StartServers 4
    
    #
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #
    MaxClients 150
    
    #
    # MaxRequestsPerChild&#58; the number of requests each child process is
    # allowed to process before the child dies.  The child will exit so
    # as to avoid problems after prolonged use when Apache &#40;and maybe the
    # libraries it uses&#41; leak memory or other resources.  On most systems, this
    # isn't really needed, but a few &#40;such as Solaris&#41; do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    #
    # NOTE&#58; This value does not include keepalive requests after the initial
    #       request per connection. For example, if a child process handles
    #       an initial request and 10 subsequent "keptalive" requests, it
    #       would only count as 1 request towards this limit.
    #
    MaxRequestsPerChild 500
    Code:
    ##
    ## httpd.conf -- Apache HTTP server configuration file
    ##
    
    #
    # Based upon the NCSA server configuration files originally by Rob McCool.
    #
    # This is the main Apache server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL&#58;http&#58;//httpd.apache.org/docs/> for detailed information about
    # the directives.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # After this file is processed, the server will look for and process
    # /usr/local/etc/httpd/srm.conf and then /usr/local/etc/httpd/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    #
    # The configuration directives are grouped into three basic sections&#58;
    #  1. Directives that control the operation of the Apache server process as a
    #     whole &#40;the 'global environment'&#41;.
    #  2. Directives that define the parameters of the 'main' or 'default' server,
    #     which responds to requests that aren't handled by a virtual host.
    #     These directives also provide default values for the settings
    #     of all virtual hosts.
    #  3. Settings for virtual hosts, which allow Web requests to be sent to
    #     different IP addresses or hostnames and have them handled by the
    #     same Apache server process.
    #
    # Configuration and logfile names&#58; If the filenames you specify for many
    # of the server's control files begin with "/" &#40;or "drive&#58;/" for Win32&#41;, the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    #
    
    ### Section 1&#58; Global Environment
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    #
    
    #
    # ServerType is either inetd, or standalone.  Inetd mode is only supported on
    # Unix platforms.
    #
    ServerType standalone
    
    #
    # ServerRoot&#58; The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # NOTE!  If you intend to place this on an NFS &#40;or otherwise network&#41;
    # mounted filesystem then please read the LockFile documentation
    # &#40;available at <URL&#58;http&#58;//www.apache.org/docs/mod/core.html#lockfile>&#41;;
    # you will save yourself a lot of trouble.
    #
    ServerRoot "/etc/httpd"
    
    #
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
    # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename. 
    #
    #LockFile /var/run/httpd.lock
    
    #
    # PidFile&#58; The file in which the server should record its process
    # identification number when it starts.
    #
    PidFile /var/run/httpd.pid
    
    #
    # ScoreBoardFile&#58; File used to store internal server process information.
    # Not all architectures require this.  But if yours does &#40;you'll know because
    # this file will be  created when you run Apache&#41; then you *must* ensure that
    # no two invocations of Apache share the same scoreboard file.
    #
    ScoreBoardFile /var/run/httpd.scoreboard
    
    #
    # In the standard configuration, the server will process httpd.conf &#40;this 
    # file, specified by the -f command line option&#41;, srm.conf, and access.conf 
    # in that order.  The latter two files are now distributed empty, as it is 
    # recommended that all directives be kept in a single file for simplicity.  
    # The commented-out values below are the built-in defaults.  You can have the 
    # server ignore these files altogether by using "/dev/null" &#40;for Unix&#41; or
    # "nul" &#40;for Win32&#41; for the arguments to the directives.
    #
    #ResourceConfig /usr/local/etc/httpd/srm.conf
    #AccessConfig /usr/local/etc/httpd/access.conf
    
    #
    # Timeout&#58; The number of seconds before receives and sends time out.
    #
    Timeout 30
    
    #
    # KeepAlive&#58; Whether or not to allow persistent connections &#40;more than
    # one request per connection&#41;. Set to "Off" to deactivate.
    #
    KeepAlive Off
    
    #
    # MaxKeepAliveRequests&#58; The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 100
    
    #
    # KeepAliveTimeout&#58; Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 15
    
    #
    # Server-pool size regulation.  Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes &#40;e.g., multiple simultaneous requests from a single
    # Netscape browser&#41;.
    #
    # It does this by periodically checking how many servers are waiting
    # for a request.  If there are fewer than MinSpareServers, it creates
    # a new spare.  If there are more than MaxSpareServers, some of the
    # spares die off.  The default values are probably OK for most sites.
    #
    MinSpareServers 5
    MaxSpareServers 10
    
    #
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    #
    StartServers 5
    
    #
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #
    MaxClients 150
    
    #
    # MaxRequestsPerChild&#58; the number of requests each child process is
    # allowed to process before the child dies.  The child will exit so
    # as to avoid problems after prolonged use when Apache &#40;and maybe the
    # libraries it uses&#41; leak memory or other resources.  On most systems, this
    # isn't really needed, but a few &#40;such as Solaris&#41; do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    #
    # NOTE&#58; This value does not include keepalive requests after the initial
    #       request per connection. For example, if a child process handles
    #       an initial request and 10 subsequent "keptalive" requests, it
    #       would only count as 1 request towards this limit.
    #
    MaxRequestsPerChild 0
    
    #
    # Listen&#58; Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost 83.xx.xxx.xx>
    # directive.
    #
    #Listen 3000
    #Listen 12.34.56.78&#58;80
    
    #
    # BindAddress&#58; You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #
    BindAddress 83.xx.xxx.xx&#58;80
    
    #
    # Dynamic Shared Object &#40;DSO&#41; Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Please read the file http&#58;//httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in &#40;statically linked and thus always available&#41; modules in your httpd
    # binary.
    #
    # Note&#58; The order in which modules are loaded is important.  Don't change
    # the order below without expert advice.
    #
    # Example&#58;
    # LoadModule foo_module libexec/mod_foo.so
    
    #
    # ExtendedStatus controls whether Apache will generate "full" status
    # information &#40;ExtendedStatus On&#41; or just basic information &#40;ExtendedStatus
    # Off&#41; when the "server-status" handler is called. The default is Off.
    #
    #ExtendedStatus On
    
    ### Section 2&#58; 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    
    #
    # If your ServerType directive &#40;set earlier in the 'Global Environment'
    # section&#41; is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    #
    
    #
    # Port&#58; The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    #
    Port 80
    
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.  
    #
    # User/Group&#58; The name &#40;or #number&#41; of the user/group to run httpd as.
    #  . On SCO &#40;ODT 3&#41; use "User nouser" and "Group nogroup".
    #  . On HPUX you may not be able to use shared memory as nobody, and the
    #    suggested workaround is to create a user www and use that user.
    #  NOTE that some kernels refuse to setgid&#40;Group&#41; or semctl&#40;IPC_SET&#41;
    #  when the value of &#40;unsigned&#41;Group is above 60000; 
    #  don't use Group "#-1" on these systems!
    #
    User www
    Group www
    
    #
    # ServerAdmin&#58; Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.
    #
    ServerAdmin times@times.com
    
    #
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get &#40;i.e., use
    # "www" instead of the host's real name&#41;.
    #
    # Note&#58; You cannot just invent host names and hope they work. The name you 
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address &#40;e.g., http&#58;//123.45.67.89/&#41;
    # anyway, and this will make redirections work in a sensible way.
    #
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
    # machine always knows itself by this address. If you use Apache strictly for 
    # local testing and development, you may use 127.0.0.1 as the server name.
    #
    ServerName 83.xx.xxx.xx
    #
    # DocumentRoot&#58; The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/home/httpd/html"
    
    #
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory &#40;and its subdirectories&#41;. 
    #
    # First, we configure the "default" to be a very restrictive set of 
    # permissions.  
    #
    <Directory />
        Options FollowSymLinks
        AllowOverride None
    </Directory>
    
    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #
    
    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "/home/httpd/html">
    
    #
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
        Options Indexes FollowSymLinks MultiViews
    
    #
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo", 
    # "AuthConfig", and "Limit"
    #
        AllowOverride None
    
    #
    # Controls who can get stuff from this server.
    #
        Order allow,deny
        Allow from all
    </Directory>
    
    #
    # UserDir&#58; The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    #
    <IfModule mod_userdir.c>
        UserDir public_html
    </IfModule>
    
    #
    # Control access to UserDir directories.  The following is an example
    # for a site where these directories are restricted to read-only.
    #
    #<Directory /home/*/public_html>
    #    AllowOverride FileInfo AuthConfig Limit
    #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    #    <Limit GET POST OPTIONS PROPFIND>
    #        Order allow,deny
    #        Allow from all
    #    </Limit>
    #    <LimitExcept GET POST OPTIONS PROPFIND>
    #        Order deny,allow
    #        Deny from all
    #    </LimitExcept>
    #</Directory>
    
    #
    # DirectoryIndex&#58; Name of the file or files to use as a pre-written HTML
    # directory index.  Separate multiple entries with spaces.
    #
    <IfModule mod_dir.c>
        DirectoryIndex index.html
    </IfModule>
    
    #
    # AccessFileName&#58; The name of the file to look for in each directory
    # for access control information.
    #
    AccessFileName .htaccess
    
    #
    # The following lines prevent .htaccess files from being viewed by
    # Web clients.  Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons.  Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files.  If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    #
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    #
    <Files ~ "^\.ht">
        Order allow,deny
        Deny from all
        Satisfy All
    </Files>
    
    #
    # CacheNegotiatedDocs&#58; By default, Apache sends "Pragma&#58; no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #
    #CacheNegotiatedDocs
    
    #
    # UseCanonicalName&#58;  &#40;new for 1.3&#41;  With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL &#40;a URL that refers back
    # to the server the response is coming from&#41; it will use ServerName and
    # Port to form a "canonical" name.  With this setting off, Apache will
    # use the hostname&#58;port that the client supplied, when possible.  This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    #
    UseCanonicalName On
    
    #
    # TypesConfig describes where the mime.types file &#40;or equivalent&#41; is
    # to be found.
    #
    <IfModule mod_mime.c>
        TypesConfig /usr/local/etc/httpd/mime.types
    </IfModule>
    
    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain
    
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server &#40;you have to add
    # it yourself with a LoadModule &#91;see the DSO paragraph in the 'Global
    # Environment' section&#93;, or recompile the server and include mod_mime_magic
    # as part of the configuration&#41;, so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    #
    <IfModule mod_mime_magic.c>
        MIMEMagicFile /usr/local/etc/httpd/magic
    </IfModule>
    
    #
    # HostnameLookups&#58; Log the names of clients or just their IP addresses
    # e.g., www.apache.org &#40;on&#41; or 204.62.129.132 &#40;off&#41;.
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off
    
    #
    # ErrorLog&#58; The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog /var/log/error_log
    
    #
    # LogLevel&#58; Control the number of messages logged to the error_log.
    # Possible values include&#58; debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn
    
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive &#40;see below&#41;.
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%&#123;Referer&#125;i\" \"%&#123;User-Agent&#125;i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%&#123;Referer&#125;i -> %U" referer
    LogFormat "%&#123;User-agent&#125;i" agent
    
    #
    # The location and format of the access logfile &#40;Common Logfile Format&#41;.
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog /var/log/access_log common
    
    #
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #
    #CustomLog /var/log/referer_log referer
    #CustomLog /var/log/agent_log agent
    
    #
    # If you prefer a single logfile with access, agent, and referer information
    # &#40;Combined Logfile Format&#41; you can use the following directive.
    #
    #CustomLog /var/log/access_log combined
    
    #
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages &#40;error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents&#41;.
    # Set to "EMail" to also include a mailto&#58; link to the ServerAdmin.
    # Set to one of&#58;  On | Off | EMail
    #
    ServerSignature Off
    
    # EBCDIC configuration&#58;
    # &#40;only for mainframes using the EBCDIC codeset, currently one of&#58;
    # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF&#41;!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC &#40;so that you can operate on them using the
    # normal POSIX tools like grep and sort&#41; while "binary files" are
    # stored with identical octets as on an ASCII machine.
    #
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    #
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents&#58;
    # > AddType       text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    #
    # EBCDICConvertByType  On=InOut text/* message/* multipart/*
    # EBCDICConvertByType  On=In    application/x-www-form-urlencoded
    # EBCDICConvertByType  On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut */*
    
    
    #
    # Aliases&#58; Add here as many aliases as you need &#40;with no limit&#41;. The format is 
    # Alias fakename realname
    #
    <IfModule mod_alias.c>
    
        #
        # Note that if you include a trailing / on fakename then the server will
        # require it to be present in the URL.  So "/icons" isn't aliased in this
        # example, only "/icons/".  If the fakename is slash-terminated, then the 
        # realname must also be slash terminated, and if the fakename omits the 
        # trailing slash, the realname must also omit it.
        #
        Alias /icons/ "/var/www/icons/"
    
        <Directory "/var/www/icons">
            Options Indexes MultiViews
            AllowOverride None
            Order allow,deny
            Allow from all
        </Directory>
    
        # This Alias will project the on-line documentation tree under /manual/
        # even if you change the DocumentRoot. Comment it if you don't want to 
        # provide access to the on-line documentation.
        #
        Alias /manual/ "/var/www/htdocs/manual/"
    
        <Directory "/var/www/htdocs/manual">
            Options Indexes FollowSymlinks MultiViews
            AllowOverride None
            Order allow,deny
            Allow from all
        </Directory>
    
        #
        # ScriptAlias&#58; This controls which directories contain server scripts.
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the realname directory are treated as applications and
        # run by the server when requested rather than as documents sent to the client.
        # The same rules about trailing "/" apply to ScriptAlias directives as to
        # Alias.
        #
        ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
    
        #
        # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
        # CGI directory exists, if you have that configured.
        #
        <Directory "/var/www/cgi-bin">
            AllowOverride None
            Options None
            Order allow,deny
            Allow from all
        </Directory>
    
    </IfModule>
    # End of aliases.
    
    #
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format&#58; Redirect old-URI new-URL
    #
    
    #
    # Directives controlling the display of server-generated directory listings.
    #
    <IfModule mod_autoindex.c>
    
        #
        # FancyIndexing is whether you want fancy directory indexing or standard
        #
        IndexOptions FancyIndexing
    
        #
        # AddIcon* directives tell the server which icon to show for different
        # files or filename extensions.  These are only displayed for
        # FancyIndexed directories.
        #
        AddIconByEncoding &#40;CMP,/icons/compressed.gif&#41; x-compress x-gzip
    
        AddIconByType &#40;TXT,/icons/text.gif&#41; text/*
        AddIconByType &#40;IMG,/icons/image2.gif&#41; image/*
        AddIconByType &#40;SND,/icons/sound2.gif&#41; audio/*
        AddIconByType &#40;VID,/icons/movie.gif&#41; video/*
    
        AddIcon /icons/binary.gif .bin .exe
        AddIcon /icons/binhex.gif .hqx
        AddIcon /icons/tar.gif .tar
        AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
        AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
        AddIcon /icons/a.gif .ps .ai .eps
        AddIcon /icons/layout.gif .html .shtml .htm .pdf
        AddIcon /icons/text.gif .txt
        AddIcon /icons/c.gif .c
        AddIcon /icons/p.gif .pl .py
        AddIcon /icons/f.gif .for
        AddIcon /icons/dvi.gif .dvi
        AddIcon /icons/uuencoded.gif .uu
        AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
        AddIcon /icons/tex.gif .tex
        AddIcon /icons/bomb.gif core
    
        AddIcon /icons/back.gif ..
        AddIcon /icons/hand.right.gif README
        AddIcon /icons/folder.gif ^^DIRECTORY^^
        AddIcon /icons/blank.gif ^^BLANKICON^^
    
        #
        # DefaultIcon is which icon to show for files which do not have an icon
        # explicitly set.
        #
        DefaultIcon /icons/unknown.gif
    
        #
        # AddDescription allows you to place a short description after a file in
        # server-generated indexes.  These are only displayed for FancyIndexed
        # directories.
        # Format&#58; AddDescription "description" filename
        #
        #AddDescription "GZIP compressed document" .gz
        #AddDescription "tar archive" .tar
        #AddDescription "GZIP compressed tar archive" .tgz
    
        #
        # ReadmeName is the name of the README file the server will look for by
        # default, and append to directory listings.
        #
        # HeaderName is the name of a file which should be prepended to
        # directory indexes. 
        #
        ReadmeName README.html
        HeaderName HEADER.html
    
        #
        # IndexIgnore is a set of filenames which directory indexing should ignore
        # and not include in the listing.  Shell-style wildcarding is permitted.
        #
        IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    
    </IfModule>
    # End of indexing directives.
    
    #
    # Document types.
    #
    <IfModule mod_mime.c>
    
        #
        # AddLanguage allows you to specify the language of a document. You can
        # then use content negotiation to give a browser a file in a language
        # it can understand.  
        #
        # Note 1&#58; The suffix does not have to be the same as the language 
        # keyword --- those with documents in Polish &#40;whose net-standard 
        # language code is pl&#41; may wish to use "AddLanguage pl .po" to 
        # avoid the ambiguity with the common suffix for perl scripts.
        #
        # Note 2&#58; The example entries below illustrate that in quite
        # some cases the two character 'Language' abbreviation is not
        # identical to the two character 'Country' code for its country,
        # E.g. 'Danmark/dk' versus 'Danish/da'.
        #
        # Note 3&#58; In the case of 'ltz' we violate the RFC by using a three char 
        # specifier. But there is 'work in progress' to fix this and get 
        # the reference data for rfc1766 cleaned up.
        #
        # Danish &#40;da&#41; - Dutch &#40;nl&#41; - English &#40;en&#41; - Estonian &#40;ee&#41;
        # French &#40;fr&#41; - German &#40;de&#41; - Greek-Modern &#40;el&#41;
        # Italian &#40;it&#41; - Korean &#40;kr&#41; - Norwegian &#40;no&#41; - Norwegian Nynorsk &#40;nn&#41;
        # Portugese &#40;pt&#41; - Luxembourgeois* &#40;ltz&#41;
        # Spanish &#40;es&#41; - Swedish &#40;sv&#41; - Catalan &#40;ca&#41; - Czech&#40;cs&#41;
        # Polish &#40;pl&#41; - Brazilian Portuguese &#40;pt-br&#41; - Japanese &#40;ja&#41;
        # Russian &#40;ru&#41;
        #
        AddLanguage da .dk
        AddLanguage nl .nl
        AddLanguage en .en
        AddLanguage et .ee
        AddLanguage fr .fr
        AddLanguage de .de
        AddLanguage el .el
        AddLanguage he .he
        AddCharset ISO-8859-8 .iso8859-8
        AddLanguage it .it
        AddLanguage ja .ja
        AddCharset ISO-2022-JP .jis
        AddLanguage kr .kr
        AddCharset ISO-2022-KR .iso-kr
        AddLanguage nn .nn
        AddLanguage no .no
        AddLanguage pl .po
        AddCharset ISO-8859-2 .iso-pl
        AddLanguage pt .pt
        AddLanguage pt-br .pt-br
        AddLanguage ltz .lu
        AddLanguage ca .ca
        AddLanguage es .es
        AddLanguage sv .sv
        AddLanguage cs .cz .cs
        AddLanguage ru .ru
        AddLanguage zh-TW .zh-tw
        AddCharset Big5         .Big5    .big5
        AddCharset WINDOWS-1251 .cp-1251
        AddCharset CP866        .cp866
        AddCharset ISO-8859-5   .iso-ru
        AddCharset KOI8-R       .koi8-r
        AddCharset UCS-2        .ucs2
        AddCharset UCS-4        .ucs4
        AddCharset UTF-8        .utf8
    
        # LanguagePriority allows you to give precedence to some languages
        # in case of a tie during content negotiation.
        #
        # Just list the languages in decreasing order of preference. We have
        # more or less alphabetized them here. You probably want to change this.
        #
        <IfModule mod_negotiation.c>
            LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
        </IfModule>
    
        #
        # AddType allows you to tweak mime.types without actually editing it, or to
        # make certain files to be certain types.
        #
        AddType application/x-tar .tgz
    
        #
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note&#58; Not all browsers support this.
        # Despite the name similarity, the following Add* directives have nothing
        # to do with the FancyIndexing customization directives above.
        #
        AddEncoding x-compress .Z
        AddEncoding x-gzip .gz .tgz
        #
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types&#58;
        #
        #AddType application/x-compress .Z
        #AddType application/x-gzip .gz .tgz
    
        #
        # AddHandler allows you to map certain file extensions to "handlers",
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action command &#40;see below&#41;
        #
        # If you want to use server side includes, or CGI outside
        # ScriptAliased directories, uncomment the following lines.
        #
        # To use CGI scripts&#58;
        #
        #AddHandler cgi-script .cgi
    
        #
        # To use server-parsed HTML files
        #
        #AddType text/html .shtml
        #AddHandler server-parsed .shtml
    
        #
        # Uncomment the following line to enable Apache's send-asis HTTP file
        # feature
        #
        #AddHandler send-as-is asis
    
        #
        # If you wish to use server-parsed imagemap files, use
        #
        #AddHandler imap-file map
    
        #
        # To enable type maps, you might want to use
        #
        #AddHandler type-map var
    
    </IfModule>
    # End of document types.
    
    #
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format&#58; Action media/type /cgi-script/location
    # Format&#58; Action handler-name /cgi-script/location
    #
    
    #
    # MetaDir&#58; specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #
    #MetaDir .web
    
    #
    # MetaSuffix&#58; specifies the file name suffix for the file containing the
    # meta information.
    #
    #MetaSuffix .meta
    
    #
    # Customizable error response &#40;Apache style&#41;
    #  these come in three flavors
    #
    #    1&#41; plain text
    #ErrorDocument 500 "The server made a boo boo.
    #  n.b.  the single leading &#40;"&#41; marks it as text, it does not get output
    #
    #    2&#41; local redirects
    #ErrorDocument 404 /missing.html
    #  to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    #  N.B.&#58; You can redirect to a script or a document using server-side-includes.
    #
    #    3&#41; external redirects
    #ErrorDocument 402 http&#58;//www.example.com/subscription_info.html
    #  N.B.&#58; Many of the environment variables associated with the original
    #  request will *not* be available to such a script.
    
    #
    # Customize behaviour based on the browser
    #
    <IfModule mod_setenvif.c>
    
        #
        # The following directives modify normal HTTP response behavior.
        # The first directive disables keepalive for Netscape 2.x and browsers that
        # spoof it. There are known problems with these browser implementations.
        # The second directive is for Microsoft Internet Explorer 4.0b2
        # which has a broken HTTP/1.1 implementation and does not properly
        # support keepalive when it is used on 301 or 302 &#40;redirect&#41; responses.
        #
        BrowserMatch "Mozilla/2" nokeepalive
        BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    
        #
        # The following directive disables HTTP/1.1 responses to browsers which
        # are in violation of the HTTP/1.0 spec by not being able to grok a
        # basic 1.1 response.
        #
        BrowserMatch "RealPlayer 4\.0" force-response-1.0
        BrowserMatch "Java/1\.0" force-response-1.0
        BrowserMatch "JDK/1\.0" force-response-1.0
    
    </IfModule>
    # End of browser customization directives
    
    #
    # Allow server status reports, with the URL of http&#58;//servername/server-status
    # Change the ".example.com" to match your domain to enable.
    #
    #<Location /server-status>
    #    SetHandler server-status
    #    Order deny,allow
    #    Deny from all
    #    Allow from .example.com
    #</Location>
    
    #
    # Allow remote server configuration reports, with the URL of
    # http&#58;//servername/server-info &#40;requires that mod_info.c be loaded&#41;.
    # Change the ".example.com" to match your domain to enable.
    #
    #<Location /server-info>
    #    SetHandler server-info
    #    Order deny,allow
    #    Deny from all
    #    Allow from .example.com
    #</Location>
    
    #
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days.  This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging 
    # script on phf.apache.org.  Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #
    #<Location /cgi-bin/phf*>
    #    Deny from all
    #    ErrorDocument 403 http&#58;//phf.apache.org/phf_abuse_log.cgi
    #</Location>
    
    ### Section 3&#58; Virtual Hosts
    #
    # VirtualHost&#58; If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    #
    # Please see the documentation at <URL&#58;http&#58;//www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    #
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    
    #
    # Use name-based virtual hosting.
    #
    NameVirtualHost 83.xx.xxx.xx
    
    #
    # VirtualHost example&#58;
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #
    <VirtualHost 83.xx.xxx.xx&#58;80>
    ServerAdmin times@times.com
    DocumentRoot /home/httpd/html
    ServerName times.com
    ErrorLog /var/log/times.com-error_log
    CustomLog /var/log/times.com-access_log common
    </VirtualHost>

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •