[SOLVED] Problem mounting SD Card

[hedron]

I can't seem to mount my SD card. There doesn't seem to be anything in dmesg | tail that would indicate a problem. I believe I have all the modules loaded:

/lib/modules/2.6.26.5/kernel/drivers/mmc/card/mmc_block.ko
/lib/modules/2.6.26.5/kernel/drivers/mmc/card/sdio_uart.ko
/lib/modules/2.6.26.5/kernel/drivers/mmc/core/mmc_core.ko
/lib/modules/2.6.26.5/kernel/drivers/mmc/host/tifm_sd.ko
/lib/modules/2.6.26.5/kernel/drivers/mmc/host/ricoh_mmc.ko
/lib/modules/2.6.26.5/kernel/drivers/mmc/host/wbsd.ko
/lib/modules/2.6.26.5/kernel/drivers/mmc/host/sdhci.ko

I've tried loading usb-storage and usbcore but still no go.

It doesn't show in fdisk -l. It should be /dev/mmcblk<something> but all I get is this:

ls: cannot access /dev/mmcblk*: No such file or directory

The only hint, that I can find, of its existence is in kinfocenter. In usb devices its listed as such in the USB devices section under EHCI host controller:

USB 2.0 Reader

Manufacturer: Generic
Serial #: 070302014067000001


Class
0
((Defined at Interface level))
Subclass
0
Protocol
0
USB Version
2.00

Vendor ID
0xbda
(Realtek Semiconductor Corp.)
Product ID
0x111
Revision
11.37

Speed
480 Mbit/s
Channels
0
Max. Packet Size
0

I don't get it.. it works perfectly on my laptop?? I think there's some magical order to modprobe everything in, but I can't seem to find that webpage that contained the secret order.

I have an abit ix38 quad-gt motherboard with an ultra all-in-one floppy/flash drive. It's connected to an internal motherboard header.

http://www.jr.com/7in1-internal-medi.../ULR_ULT31799/
http://www.uabit.com/index.php?optio...ge=1&model=402

[hedron]

Ok, I figured it out. I didn't enable scan luns in the scsi section of the kernel config.

SCSI_MULTI_LUN [=y]

[oz]

Thanks for reporting back with the solution, hedron!