Sound? What Sound? No Sound!

[jayd512]

While I've been writing HTML for years, I don't understand that "code tag" you just mentioned...

As for the "/sbin/lsmod" suggestion, can't believe how easy that was ... and yet there's nothing in the Slackware material I can recall which suggests doing that, and there's nothing in the Unix "Help" commands library either. How'd you come across that one?

First, when you reply to a post, you'll see some buttons across the top of the panel. One of which looks like a pound sign (#). Click it, and everything you type in will be wrapped in a CODE tag.
As far as the /sbin thing... some distros don't put commands such as lspci or lsmod in a normal users default executable path. Slack just happens to be one of those distros.

Here's the long delayed file dump you asked about:

I don't recall asking about any file dumps... but anywho.
Your output shows several items listed that start with snd_, telling me that you do have sound drivers loaded and active.
What type of speakers are you using? Are they integrated or external?

[tyc]

First, when you reply to a post, you'll see some buttons across the top of the panel. One of which looks like a pound sign (#). Click it, and everything you type in will be wrapped in a CODE tag.
As far as the /sbin thing... some distros don't put commands such as lspci or lsmod in a normal users default executable path. Slack just happens to be one of those distros.



I don't recall asking about any file dumps... but anywho.
Your output shows several items listed that start with snd_, telling me that you do have sound drivers loaded and active.
What type of speakers are you using? Are they integrated or external?

Regarding that pound sign, never noticed it before. Most of these com panels have the usual array of what are essentially word processor icons for "bells, whistles and chrome" purposes, which I never use ... I tend to type/enter, perhaps way too fast, about as fast as I think.

As for the type of speakers, they're integrated. I'm using a recently purchased HP G71 laptop and when using what little remains of the Window$ side, those speakers work ... there's a stunningly beautiful sample piece by Debuse, called Maid With Flaxen Hair. If you haven't heard it yet, you're due for a treat.

As for "File Dumps", I suspect you understand that differently than I do, but no matter, the data got through and you were able to determine that the sound drivers are "loaded and active." For what it may be worth, on boot-up, I am seeing near the end of the display (I go in level 3, not 5) and am advised that "alsacntl store" is active.

Again, thanks.

tyc

[jayd512]

In that case, try opening a terminal and executing:

alsamixer

You may have to do this as root.

Make sure nothing is muted.
If you make any adjustments, run this:

/usr/sbin/alsactl store

[tyc]

In that case, try opening a terminal and executing:

alsamixer

You may have to do this as root.

Make sure nothing is muted.
If you make any adjustments, run this:

/usr/sbin/alsactl store

I've been that route, which is why I made mention that on boot-up, the "alsactl store" is showing up as restored, near the bottom of the boot-up activities being displayed.

On this end, everything seems normal regarding sound - except no sound. Definitely has me confused - so far.

Again, thanks.

tyc

[jayd512]

I'll admit it... I'm running out of ideas here
One of the only things I can think of now is an obscure little command: alsaunmute

*EDIT*

I just thought about something... If you login as root, do you get sound then?

[tyc]

I'll admit it... I'm running out of ideas here
One of the only things I can think of now is an obscure little command: alsaunmute

*EDIT*

I just thought about something... If you login as root, do you get sound then?

Haven't heard of alsounmute before but will try it.

As for getting a sound when logging in as root - nothing. No sound.

Recently stumbled across a WWW site regarding the HP g60 and g70 series laptops, one dedicated to the "sound problems" which may be germain to these laptops, which is to say, the lack of sound may not be the fault of Linux and/or Linux settings, rather the HP design itself. Not too convinced of that at this point but then again there might be something to this theory.

Again, thanks for the help and yes, I will try that alsaunmute suggestion. Either way I'll get back to you and let you know what happened - or didn't.

tyc

[jayd512]

If alsaunmute does nothing for you, reboot your machine.
Then execute

dmesg

Post the entire output back here... Just so you know, it'll be a long one!

[tyc]

If alsaunmute does nothing for you, reboot your machine.
Then execute

dmesg

Post the entire output back here... Just so you know, it'll be a long one!

Just got our last, been busy with taxes and almost done.

Will try <dmesg> and see what happens.

Again, thanks.

tyc

[tyc]

... Will try <dmesg> and see what happens.
Again, thanks.

tyc

Suspicision has it that the end of this file dump will tell you more than it is currently telling me.

tyc



_sse (8008.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Enabling special treatment for EC from MSI.
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 20 io port: [0x4110-0x4117]
pci 0000:00:02.1: reg 10 64bit mmio: [0xd2400000-0xd24fffff]
pci 0000:00:1a.0: reg 20 io port: [0x40e0-0x40ff]
pci 0000:00:1a.1: reg 20 io port: [0x40c0-0x40df]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xd4505c00-0xd4505fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xd4500000-0xd4503fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd4505800-0xd4505bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x4108-0x410f]
pci 0000:00:1f.2: reg 14 io port: [0x411c-0x411f]
pci 0000:00:1f.2: reg 18 io port: [0x4100-0x4107]
pci 0000:00:1f.2: reg 1c io port: [0x4118-0x411b]
pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xd4505000-0xd45057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xd4506000-0xd45060ff]
pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
pci 0000:00:1f.6: reg 10 64bit mmio: [0xd4504000-0xd4504fff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xd3500000-0xd350ffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xd3500000-0xd44fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd13fffff]
pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xd1410000-0xd1410fff]
pci 0000:03:00.0: reg 20 64bit mmio: [0xd1400000-0xd140ffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xd2500000-0xd34fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1400000-0xd23fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x600-0x60f has been reserved
system 00:02: ioport range 0x610-0x610 has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x810-0x817 has been reserved
system 00:02: ioport range 0x820-0x823 has been reserved
system 00:02: ioport range 0x400-0x47f has been reserved
system 00:02: ioport range 0x500-0x53f has been reserved
system 00:02: ioport range 0x380-0x387 has been reserved
system 00:02: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xd3500000-0xd44fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d13fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x2000-0x2fff
pci 0000:00:1c.1: MEM window: 0xd2500000-0xd34fffff
pci 0000:00:1c.1: PREFETCH window: 0x000000d1400000-0x000000d23fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xd3500000-0xd44fffff]
pci_bus 0000:02: resource 2 mem: [0xd0400000-0xd13fffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xd2500000-0xd34fffff]
pci_bus 0000:03: resource 2 mem: [0xd1400000-0xd23fffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 io: [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Aug 17 2009 11:56:22) installed
msgmni has been set to 7693
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20004680000, using 1536k, total 65472k
vesafb: mode is 1024x768x8, linelength=1024, pages=84
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fcoe_transport_register:fcoesw
Adaptec aacraid driver 1.1-5[2456]-ms
scsi: <fdomain> Detection failed (no card)
QLogic Fibre Channel HBA Driver: 8.03.00-k4
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright(c) 2004-2008 Emulex. All rights reserved.
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505380 irq 26
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100, ATAPI AN
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd4505c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd4505800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.6 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.6 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29.6 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29.6 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.29.6 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
raid6: int64x1 1773 MB/s
raid6: int64x2 2164 MB/s
raid6: int64x4 2152 MB/s
raid6: int64x8 1472 MB/s
raid6: sse2x1 3320 MB/s
raid6: sse2x2 3613 MB/s
raid6: sse2x4 5789 MB/s
raid6: using algorithm sse2x4 (5789 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: sda5: couldn't mount because of unsupported optional features (240).
EXT2-fs: sda5: couldn't mount because of unsupported optional features (240).
EXT4-fs: barriers enabled
usb 2-1: new high speed USB device using ehci_hcd and address 2
kjournald2 starting: pid 1437, dev sda5:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda5 with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
Freeing unused kernel memory: 436k freed
usb 2-1: New USB device found, idVendor=05dc, idProduct=a400
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: JUMPDRIVE SECURE
usb 2-1: Manufacturer: LEXAR MEDIA
usb 2-1: SerialNumber: 302AC709070334251204
usb 2-1: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 2-4: new high speed USB device using ehci_hcd and address 3
usb 2-4: New USB device found, idVendor=064e, idProduct=a125
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: HP Webcam-101
usb 2-4: Manufacturer: SuYin
usb 2-4: SerialNumber: CN0317-J310-SE01-VH-R01.02.02
usb 2-4: configuration #1 chosen from 1 choice
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=09da, idProduct=0006
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
usb 4-1: Manufacturer: USB Optical Mouse
usb 4-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1a.1-1/input0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: WMI: Mapper loaded
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button (CM) [SLPB]
acpi device:04: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input7
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 65532K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 27 for MSI/MSI-X
eth0: RTL8102e at 0xffffc20000062000, 00:26:9e:ce:9b:57, XID 24c00000 IRQ 27
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Linux video capture interface: v2.00
rtc_cmos 00:04: RTC can wake from S4
cfg80211: Using static regulatory domain info
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
ACPI: SSDT B9E70C98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
ACPI: SSDT B9E6E618, 05B3 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT B9E6FE18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)
ACPI: SSDT B9E70F18, 008D (r1 PmRef ApCst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20081204]
uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:a125)
input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
Marking TSC unstable due to TSC halts in idle
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ath9k: 0.1
ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath9k 0000:02:00.0: setting latency timer to 64
wmaster0 (ath9k): not using net_device_ops yet
phy0: Selected rate control algorithm 'ath9k_rate_control'
wlan0 (ath9k): not using net_device_ops yet
Registered led device: ath9k-phy0:radio
Registered led device: ath9k-phy0:assoc
Registered led device: ath9k-phy0:tx
Registered led device: ath9k-phy0:rx
phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc20004660000, irq=16
input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Adding 4088500k swap on /dev/sda6. Priority:-1 extents:1 across:4088500k
Clocksource tsc unstable (delta = -153803473 ns)
fuse init (API version 7.11)
EXT4 FS on sda5, internal journal on sda5:8
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
scsi 6:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 1014784 512-byte hardware sectors: (519 MB/495 MiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 1014784 512-byte hardware sectors: (519 MB/495 MiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
EXT4-fs: barriers enabled
kjournald2 starting: pid 3189, dev sda7:8, commit interval 5 seconds
EXT4 FS on sda7, internal journal on sda7:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda7 with ordered data mode
r8169: eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_algo_bit: exports duplicate symbol i2c_bit_add_numbered_bus (owned by kernel)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 28 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 on minor 0
usb 2-1: USB disconnect, address 2
[drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_algo_bit: exports duplicate symbol i2c_bit_add_numbered_bus (owned by kernel)
FAT: Directory bread(block 2016) failed
FAT: Directory bread(block 2017) failed
FAT: Directory bread(block 201 failed
FAT: Directory bread(block 2019) failed
FAT: Directory bread(block 2020) failed
FAT: Directory bread(block 2021) failed
FAT: Directory bread(block 2022) failed
FAT: Directory bread(block 2023) failed
FAT: Directory bread(block 361936) failed
FAT: Directory bread(block 361937) failed
FAT: Directory bread(block 36193 failed
FAT: Directory bread(block 361939) failed
FAT: Directory bread(block 361940) failed
FAT: Directory bread(block 361941) failed
FAT: Directory bread(block 361942) failed
FAT: Directory bread(block 361943) failed
FAT: Directory bread(block 2016) failed
FAT: Directory bread(block 2017) failed
FAT: Directory bread(block 201 failed
FAT: Directory bread(block 2019) failed
FAT: Directory bread(block 2020) failed
FAT: Directory bread(block 2021) failed
FAT: Directory bread(block 2022) failed
FAT: Directory bread(block 2023) failed
FAT: Directory bread(block 361936) failed
FAT: Directory bread(block 361937) failed
FAT: Directory bread(block 36193 failed
FAT: Directory bread(block 361939) failed
FAT: Directory bread(block 361940) failed
FAT: Directory bread(block 361941) failed
FAT: Directory bread(block 361942) failed
FAT: Directory bread(block 361943) failed
[drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
mtrr: no MTRR for c0000000,10000000 found
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_algo_bit: exports duplicate symbol i2c_bit_add_numbered_bus (owned by kernel)


"Directory bread" ... have no idea what that is ... you?

tyc

[jayd512]

Never ran across the Directory bread thing... looking in to it.
I'm still unsure as to why your sound isn't actually working at this point.

I'm just about out of ideas here...
Post the output of

cat /etc/group
cat /etc/services

You may need to be root to get those.