Slackware Installation

[yancek]

If you installed Lilo to the mbr of the sdb drive and have set sdb to first boot priority in the BIOS, there is no reason it should not boot.
Are you able to boot Ubuntu? If so, have you run os-prober and/or update-grub from Ubuntu? If you could do that, you should be able to chainload Slackware from the Ubuntu Grub2. Is there some reason you do not want to do that?

If you haven't resolved this, you might google 'bootinfoscript', go to its site, read the directions, download and run it and take a look at the output, a results.txt file. Or you could post the file here.

[satyasaran]

yes, I had done chainload fron Grub2 and after starting the Slackware it was giving error that was posted in previous screen shot. And also i tried only single hardrive removing the sda but its giving the same. I had tried all the alternatives.

[satyasaran]

So sda is Ubuntu, whilesdb is Slackware. You directed the Slackware installer to install LILO to the MBR of sdb, then you were instructed to exit the installer and reboot. Correct?

Yes exactly, is there any solution please.....

[yancek]

Go to the site below, read the directions, download and run the bootinfoscript and post the output, a results.txt file. This will provide detailed information on 'both' drives/partitions and boot files. Make sure both drives are attached when you do this:

Boot Info Script | Free System Administration software downloads at SourceForge.net

[satyasaran]

Boot Info Script 0.61 [1 April 2012]


============================= Boot Info Summary: ===============================

=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector
951754752 of the same hard drive for core.img. core.img is at this
location and looks in partition 72 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 72 for .

sda1: __________________________________________________ ________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.10
Boot files: /boot/grub/grub.cfg /etc/fstab

sda2: __________________________________________________ ________________________

File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:

sda3: __________________________________________________ ________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________ ________________________

File system: ext4
Boot sector type: -
Boot sector info:
Mounting failed: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so


sdb2: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sdb3: __________________________________________________ ________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb4: __________________________________________________ ________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Slackware 14.0
Boot files: /etc/fstab /etc/lilo.conf /boot/map

============================ Drive/Partition Info: =============================

Drive: sda __________________________________________________ ___________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 1 976,773,167 976,773,167 ee GPT


GUID Partition Table detected.

Partition Start Sector End Sector # of Sectors System
/dev/sda1 482,134,016 951,752,703 469,618,688 Data partition (Windows/Linux)
/dev/sda2 951,754,752 951,959,551 204,800 BIOS Boot partition
/dev/sda3 951,959,552 976,773,119 24,813,568 Swap partition (Linux)

Drive: sdb __________________________________________________ ___________________

Disk /dev/sdb: 1500.3 GB, 1500301909504 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdb1 * 63 996,029 995,967 83 Linux
/dev/sdb2 126,773,248 2,930,276,351 2,803,503,104 7 NTFS / exFAT / HPFS
/dev/sdb3 117,194,175 126,773,247 9,579,073 82 Linux swap / Solaris
/dev/sdb4 996,030 117,194,174 116,198,145 83 Linux


"blkid" output: __________________________________________________ ______________

Device UUID TYPE LABEL

/dev/sda1 87ee9485-c14c-4579-be18-4e6953c73778 ext4
/dev/sda3 ad986a00-db3c-4d17-a5ea-44d1330a83a0 swap
/dev/sdb1 308654dd-5885-426b-b988-4f8e22864e82 ext4
/dev/sdb2 616296D64C2BABA6 ntfs DHRM..!
/dev/sdb3 9da11990-9f00-41f2-9911-3d2f5fab5498 swap
/dev/sdb4 6cf9ae58-15f7-4851-8b9f-6f28b5554c1e ext4

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sdb2 /media/saran/DHRM..! fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}

if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_IN
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 13,37,73; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
linux /boot/vmlinuz-3.5.0-25-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
initrd /boot/initrd.img-3.5.0-25-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
menuentry 'Ubuntu, with Linux 3.5.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-25-generic-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-25-generic ...'
linux /boot/vmlinuz-3.5.0-25-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-25-generic-recovery-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-25-generic ...'
linux /boot/vmlinuz-3.5.0-25-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-24-generic-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-24-generic ...'
linux /boot/vmlinuz-3.5.0-24-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-24-generic-recovery-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-24-generic ...'
linux /boot/vmlinuz-3.5.0-24-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-23-generic-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-23-generic ...'
linux /boot/vmlinuz-3.5.0-23-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-23-generic-recovery-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-23-generic ...'
linux /boot/vmlinuz-3.5.0-23-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-22-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-22-generic-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-22-generic ...'
linux /boot/vmlinuz-3.5.0-22-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-22-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-22-generic-recovery-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-22-generic ...'
linux /boot/vmlinuz-3.5.0-22-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-22-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-21-generic-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-21-generic ...'
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-21-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-21-generic-recovery-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-21-generic ...'
linux /boot/vmlinuz-3.5.0-21-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-21-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-17-generic ...'
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro crashkernel=384M-2G:64M,2G-:128M quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-87ee9485-c14c-4579-be18-4e6953c73778' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
echo 'Loading Linux 3.5.0-17-generic ...'
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=87ee9485-c14c-4579-be18-4e6953c73778 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-17-generic
}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 87ee9485-c14c-4579-be18-4e6953c73778
else
search --no-floppy --fs-uuid --set=root 87ee9485-c14c-4579-be18-4e6953c73778
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=87ee9485-c14c-4579-be18-4e6953c73778 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
#UUID=ad5b04a3-370d-472c-9e09-c2c775893bbf none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

300.120830536 = 322.252288000 boot/grub/grub.cfg 1
230.911666870 = 247.939514368 boot/initrd.img-3.5.0-17-generic 1
237.522769928 = 255.038132224 boot/initrd.img-3.5.0-21-generic 2
240.952461243 = 258.720735232 boot/initrd.img-3.5.0-22-generic 2
346.173027039 = 371.700457472 boot/initrd.img-3.5.0-23-generic 2
230.569664001 = 247.572291584 boot/initrd.img-3.5.0-24-generic 1
238.882164001 = 256.497770496 boot/initrd.img-3.5.0-25-generic 2
274.032676697 = 294.240346112 boot/vmlinuz-3.5.0-17-generic 1
231.205017090 = 248.254496768 boot/vmlinuz-3.5.0-21-generic 1
240.849548340 = 258.610233344 boot/vmlinuz-3.5.0-22-generic 1
451.599548340 = 484.901322752 boot/vmlinuz-3.5.0-23-generic 1
349.314395905 = 375.073476608 boot/vmlinuz-3.5.0-24-generic 1
235.029239655 = 252.360724480 boot/vmlinuz-3.5.0-25-generic 1
238.882164001 = 256.497770496 initrd.img 2
238.882164001 = 256.497770496 initrd.img.old 2
235.029239655 = 252.360724480 vmlinuz 1
235.029239655 = 252.360724480 vmlinuz.old 1

=============================== sdb4/etc/fstab: ================================

--------------------------------------------------------------------------------
/dev/sdb3 swap swap defaults 0 0
/dev/sdb4 / ext4 defaults 1 1
/dev/sdb2 /fat-d ntfs-3g fmask=111,dmask=000 1 0
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
--------------------------------------------------------------------------------

============================= sdb4/etc/lilo.conf: ==============================

--------------------------------------------------------------------------------
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append=" vt.default_utf8=0"
boot = /dev/sda

# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used. We don't specify it here, as there's just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,27,0,255

# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt

# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout = 1200
# Override dangerous defaults that rewrite the partition table:
change-rules
reset
# Normal VGA console
vga = normal
# Ask for video mode at boot (time out to normal in 30s)
#vga = ask
# VESA framebuffer console @ 1024x768x64k
#vga=791
# VESA framebuffer console @ 1024x768x32k
#vga=790
# VESA framebuffer console @ 1024x768x256
#vga=773
# VESA framebuffer console @ 800x600x64k
#vga=788
# VESA framebuffer console @ 800x600x32k
#vga=787
# VESA framebuffer console @ 800x600x256
#vga=771
# VESA framebuffer console @ 640x480x64k
#vga=785
# VESA framebuffer console @ 640x480x32k
#vga=784
# VESA framebuffer console @ 640x480x256
#vga=769
# End LILO global section
# Windows bootable partition config begins
other = /dev/sdb2
label = Windows
table = /dev/sdb
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sdb4
label = Linux
read-only
# Linux bootable partition config ends
--------------------------------------------------------------------------------

=================== sdb4: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

32.613635063 = 35.018624000 boot/vmlinuz 1
32.604704857 = 35.009035264 boot/vmlinuz-generic-3.2.29 1
32.613635063 = 35.018624000 boot/vmlinuz-huge-3.2.29 1