Find the answer to your Linux question:
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17
Originally Posted by mindblast I have i810 video on board from intel, and an eizo F56 monitor. I'm really new on slackware, and when i start X, only resolution i ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Linux Guru antidrugue's Avatar
    Join Date
    Oct 2005
    Location
    Montreal, Canada
    Posts
    3,211

    Re: slackware 10.2 video drivers


    Quote Originally Posted by mindblast
    I have i810 video on board from intel, and an eizo F56 monitor. I'm really new on slackware, and when i start X, only resolution i have is verry low... where do i find drivers for my board or my monitor, and how do i install them?
    Your video chipset is pretty much THE most common one, so it is very unikely that you will need to do anything more than manualy changing the resolution in the /etc/X11/xorg.conf file.

    So:
    Code:
    cd /etc/X11
    sudo cp xorg.conf xorg.conf_backup
    sudo nano xorg.conf
    Go at the section "screen" in xorg.conf

    Notice...
    Section "Screen"
    ... some stuff here
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768"
    EndSubSection
    EndSection

    Change to "Modes" to the one you want, and X will use the highest one that works.

    That's it.
    "To express yourself in freedom, you must die to everything of yesterday. From the 'old', you derive security; from the 'new', you gain the flow."

    -Bruce Lee

  2. #12
    Linux Newbie mindblast's Avatar
    Join Date
    Nov 2005
    Location
    iasi, RO
    Posts
    132
    # File generated by xf86config.

    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # ************************************************** ********************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # ************************************************** ********************

    # NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
    # driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
    # this out to me.

    # This XF86Config file is designed for use with the VESA framebuffer.
    # This generic interface should work with nearly all video cards
    # (although not every card will support every resolution).

    # With the new driver, it should no longer be required to have frame buffer
    # support in the kernel, or to run it on the console.
    #
    # Enjoy!
    # -- volkerdi@slackware.com
    #

    # ************************************************** ********************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** ********************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    # This loads the font modules
    Load "type1"
    Load "freetype"
    #Load "speedo"

    # This loads the GLX module
    Load "glx"

    EndSection

    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

    # ModulePath can be used to set a search path for the X server modules.
    # The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # ************************************************** ********************
    # Server flags section.
    # ************************************************** ********************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "DontZoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    # Set the basic blanking screen saver timeout.

    # Option "blank time" "10" # 10 minutes

    # Set the DPMS timeouts. These are set here because they are global
    # rather than screen-specific. These settings alone don't enable DPMS.
    # It is enabled per-screen (or per-monitor), and even then only when
    # the driver supports it.

    # Option "standby time" "20"
    # Option "suspend time" "30"
    # Option "off time" "60"

    # On some platform the server needs to estimate the sizes of PCI
    # memory and pio ranges. This is done by assuming that PCI ranges
    # don't overlap. Some broken BIOSes tend to set ranges of inactive
    # devices wrong. Here one can adjust how aggressive the assumptions
    # should be. Default is 0.

    # Option "EstimateSizesAggresively" "0"

    EndSection

    # ************************************************** ********************
    # Input devices
    # ************************************************** ********************

    # ************************************************** ********************
    # Core keyboard's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    # Set the keyboard auto repeat parameters. Not all platforms implement
    # this.

    # Option "AutoRepeat" "500 5"

    # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

    # Option "Xleds" "1 2 3"

    # To disable the XKEYBOARD extension, uncomment XkbDisable.

    # Option "XkbDisable"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a European
    # keyboard, you will probably want to use one of:
    #
    # Option "XkbModel" "pc102"
    # Option "XkbModel" "pc105"
    #
    # If you have a Microsoft Natural keyboard, you can use:
    #
    # Option "XkbModel" "microsoft"
    #
    # If you have a US "windows" keyboard you will want:
    #
    # Option "XkbModel" "pc104"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #
    # Option "XkbLayout" "de"
    #
    # or:
    #
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #
    # Option "XkbOptions" "ctrl:swapcaps"


    # These are the default XKB settings for X.Org
    #
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    EndSection


    # ************************************************** ********************
    # Core Pointer's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"

    # On platforms where PnP mouse detection is supported the following
    # protocol setting can be used when using a newer PnP mouse:

    # Option "Protocol" "Auto"

    # The available mouse protocols types that you can set below are:
    # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
    # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
    # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
    # ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol" "PS/2"

    # The mouse device. The device is normally set to /dev/mouse,
    # which is usually a symbolic link to the real device.

    Option "Device" "/dev/mouse"
    # Option "Device" "/dev/psaux"
    # Option "Device" "/dev/ttyS0"
    # Option "Device" "/dev/ttyS1"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection

    # Some examples of extended input devices

    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "My Monitor"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync 31.5 - 50.0

    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

    EndSection


    # ************************************************** ********************
    # Graphics device section
    # ************************************************** ********************

    # Any number of graphics device sections may be present

    Section "Device"
    Identifier "VESA Framebuffer"
    Driver "vesa"
    #VideoRam 4096
    # Insert Clocks lines here if appropriate
    EndSection

    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "VESA Framebuffer"
    Monitor "My Monitor"

    # If your card can handle it, a higher default color depth (like 24 or 32)
    # is highly recommended.

    # DefaultDepth 8
    # DefaultDepth 16
    DefaultDepth 24
    # DefaultDepth 32

    # "1024x768" is also a conservative usable default resolution. If you
    # have a better monitor, feel free to try resolutions such as
    # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
    # card/monitor can produce)

    Subsection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubsection

    EndSection

    # ************************************************** ********************
    # ServerLayout sections.
    # ************************************************** ********************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection
    this is xorg.conf
    antidrugue, dosen't work. I try it earlyer... Thanx anyway.


    Linux version 2.4.31 (root@tree) (gcc version 3.3.5) #6 Sun Jun 5 19:04:47 PDT 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000007ee2ec0 (usable)
    BIOS-e820: 0000000007ee2ec0 - 0000000007ee6ec0 (ACPI data)
    BIOS-e820: 0000000007ee6ec0 - 0000000007eeef00 (ACPI NVS)
    BIOS-e820: 0000000007eeef00 - 0000000008000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    126MB LOWMEM available.
    On node 0 totalpages: 32482
    zone(0): 4096 pages.
    zone(1): 28386 pages.
    zone(2): 0 pages.
    IBM machine detected. Enabling interrupts during APM calls.
    Kernel command line: BOOT_IMAGE=Linux ro root=301
    Initializing CPU#0
    Detected 1002.291 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 1998.84 BogoMIPS
    Memory: 125292k/129928k available (1832k kernel code, 4248k reserved, 607k data, 120k init, 0k highmem)
    Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
    Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
    Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
    CPU: Common caps: 0383fbff 00000000 00000000 00000000
    CPU: Intel Pentium III (Coppermine) stepping 0a
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    PCI: PCI BIOS revision 2.10 entry at 0xfd7ec, last bus=1
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    Transparent bridge - Intel Corp. 82801AA PCI Bridge
    PCI: Using IRQ router PIIX/ICH [8086/2410] at 00:1f.0
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    VFS: Disk quotas vdquot_6.5.1
    Journalled Block Device driver loaded
    pty: 512 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-0 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    Real Time Clock Driver v1.10f
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH: IDE controller at PCI slot 00:1f.1
    ICH: chipset revision 2
    ICH: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hdaMA, hdbio
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdcMA, hddio
    hda: QUANTUM FIREBALLlct20 20, ATA DISK drive
    blk: queue c03af460, I/O limit 4095Mb (mask 0xffffffff)
    hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive
    hdc: Disabling (U)DMA for SAMSUNG CD-ROM SC-148C
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: attached ide-disk driver.
    hda: host protected area => 1
    hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(33)
    hdc: attached ide-cdrom driver.
    hdc: ATAPI 48X CD-ROM drive, 128kB Cache
    Uniform CD-ROM driver Revision: 3.12
    Partition check:
    hda: hda1 hda2
    SCSI subsystem driver Revision: 1.00
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    md: linear personality registered as nr 1
    md: raid0 personality registered as nr 2
    md: raid1 personality registered as nr 3
    md: raid5 personality registered as nr 4
    raid5: measuring checksumming speed
    8regs : 1659.200 MB/sec
    32regs : 954.800 MB/sec
    pIII_sse : 2022.000 MB/sec
    pII_mmx : 2269.600 MB/sec
    p5_mmx : 2369.200 MB/sec
    raid5: using function: pIII_sse (2022.000 MB/sec)
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    LVM version 1.0.8(17/11/2003)
    Initializing Cryptographic API
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 8192 bind 16384)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 120k freed
    Adding Swap: 514040k swap-space (priority -1)
    EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 93M
    agpgart: Detected an Intel i810 E Chipset.
    agpgart: AGP aperture is 64M @ 0xf8000000
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Linux Kernel Card Services 3.1.22
    options: [pci] [cardbus] [pm]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Intel ISA PCIC probe: not found.
    Databook TCIC-2 PCMCIA probe: not found.
    ds: no socket drivers loaded!
    8139too Fast Ethernet driver 0.9.26
    PCI: Found IRQ 11 for device 01:03.0
    PCI: Sharing IRQ 11 with 00:01.0
    eth0: RealTek RTL8139 at 0xc890bf00, 00:e0:4c:58:2a:b5, IRQ 11
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    PCI: Found IRQ 9 for device 00:1f.5
    PCI: Sharing IRQ 9 with 00:1f.3
    PCI: Setting latency timer of device 00:1f.5 to 64
    intel8x0_measure_ac97_clock: measured 41539 usecs
    intel8x0: clocking to 48000
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    uhci.c: USB Universal Host Controller Interface driver v1.1
    PCI: Found IRQ 10 for device 00:1f.2
    PCI: Setting latency timer of device 00:1f.2 to 64
    uhci.c: USB UHCI at I/O 0xff00, IRQ 10
    usb.c: new USB bus registered, assigned bus number 1
    hub.c: USB hub found
    hub.c: 2 ports detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    i810_rng: RNG not detected
    hw_random: RNG not detected

  3. #13
    Linux Enthusiast
    Join Date
    Jun 2005
    Posts
    668
    isnt that using vesa?

  4. #14
    Linux Newbie mindblast's Avatar
    Join Date
    Nov 2005
    Location
    iasi, RO
    Posts
    132
    whatever... i get pissed off and i've installed debian and works fine. Thanx very much for all the help. Is very nice to find people whitch not leafing on you just because you are a begginer. Thanx.

  5. #15
    Linux Newbie mindblast's Avatar
    Join Date
    Nov 2005
    Location
    iasi, RO
    Posts
    132
    whatever... i get pissed off and i've installed debian and works fine. Thanx very much for all the help. Is very nice to find people whitch not leafing on you just because you are a begginer. Thanx.

  6. #16
    Linux Guru antidrugue's Avatar
    Join Date
    Oct 2005
    Location
    Montreal, Canada
    Posts
    3,211
    Hehe, cool!
    "To express yourself in freedom, you must die to everything of yesterday. From the 'old', you derive security; from the 'new', you gain the flow."

    -Bruce Lee

  7. #17
    Just Joined!
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    13
    Code:
    Section "Device"
    Identifier "VESA Framebuffer"
    Driver "vesa"
    #VideoRam 4096
    # Insert Clocks lines here if appropriate
    EndSection
    Replace with ...
    Code:
    Section "Device"
    Identifier "Intel"
    Driver "i810"
    #VideoRam 4096
    # Insert Clocks lines here if appropriate
    EndSection
    VESA wasn't getting to the extra ram for video, hence the low res I believe.

    Also you'll have to change in xorg.conf :
    Code:
    Section "Screen"
    Identifier "Screen 1"
    Device "Intel"
    Monitor "My Monitor"
    Depending on exact chipset, I think you can add "VideoRam 32000" to use 32mb for example.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •