Greetings! I just installed Slackware 11 kernel 184.108.40.206 and it's kernel modules and headers but I can't get it to connect to the internet. My NIC connects to a router/modem and no other boxes share this connection. I am using ADSL that uses a DHCP protocol.
This are the info my ISP gave me;
Subnet Mask: 255.255.240.0
DHCP Server/Default Gateway: 220.127.116.11
DNS: 18.104.22.168 and 22.214.171.124
This is my resolv.conf
This is my /etc/rc.d/rc.inet1
# Config information for eth0:
# Default gateway IP address:
My ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:08:A1:1D:08:0B
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:7470 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:532744 (520.2 KiB) TX bytes:5188 (5.0 KiB)
Interrupt:11 Base address:0x2c00
tulip 46240 0
tulip0: MII transceiver #1 config 3100 status 7809 advertising 01e1.
eth0: Davicom DM9102/DM9102A rev 64 at e0c82c00, 00:08:A1:1D:08:0B, IRQ 11.
I also added these lines in lilo.conf
append = "ether=irq,ioadd,eth0"
append = "ether=11,0x300,eth0"
And still no connection :???: I don't know if I missed anything, I hope someone can advise me what to do because I'm really struggling to get this box online. Thanks in advance :)
Was the router already configured and working
before you installed linux on your computer?