Printable View
Distro Slackware 12
1.
My motherboard is
Mobile Intel(R) 945GM Express Chipset Family
I want to install graphics card driver. Please help.
I have windows driver.
I would also like to install chipset driver if possible.
2.
How to configure to load module on boot?
I want to load intel pro ve 100 network card driver.
I have to run modprobe e100 on login and its very irritating.
I didn't found e100 in /etc/rc.d/modules.
Please help.
For the Graphic Card, if you have a intel vga that's great, only use the i810 driver in the xorg.conf , edit the /etc/X11/xorg.conf and replace the vesa under the device section with i810 ,this drivers support for intel 915/915GM/935/945 , and many others.Quote:
Originally Posted by littledrop
For the chipset driver , you don't have to play with it, usually the kernel load the correct setting for your chipset
for the network , even if there is no entry in the rc.modules put it by hand, in fact not all the modules are listen.
also if you have a wifi card, make the rc.wireless executable chmod +x rc.wireless.
Hope this helps
Thanks. It worked.
I wanna reduce the brightness, so I wen to display properties and se the brighness. It works but when I exit that settings box , display is back to lot of brightness.
Here is the settings in xorg.conf
Gamma 0.40 0.40 0.40 # created by KGamma
Any idea?
DefaultDepth 32 doesn't work with my card.
Why? Does it needs very high end graphics card?
Please could you post the screen section ! in you xorg.conf file ,and also what you receive when changing to 32 depth the X doesn't start ?
for the Gamma, please tell me what do you want to do exactly ?
Regards.
That problem is solved. I ahve 2 more problems.
I will post new thread if I can get solution in thsi thread.
1. I get this error when I run startx for non-root user.
call to lnusertemp failed (temporary directoris fail?) , check your installation.
2. when I set default depth =32 I get this on startx
(EE) intel(0): Given depth (32) is not supported by I830 driver
I am using i810 driver.
Thanks.
that is because 32 is actually 24... Set
DefaultDepth = 24 and you will be in good shape.
try to use use simply intel instead of i810Quote:
Originally Posted by littledrop
For the non root users , how did you add those user , they have a login shell and home ?
1. Defaut Depth=32 still not working. I am using 24
2. home directories are there.
I have one more problem.
I was following this guide http://wiki.beryl-project.org/wiki/I...l_on_Slackware
Now I can't start X.
I ran the optional steps to remove Xorg6.9.
What to do?
I'm lost , because you said from the beginning it's Slackware 12.0 , wish comes by default with Xorg 7.3 and you don't have to change your X in order to use Beryl/compiz these tow require Modular Xorg (7.0 and later ) , this wiki it's for Slackware 11.0 and i never follow it because the driver build for i810 doesn't seems to be okay , because i have some trouble with it with my intel graphic card .
For your problem don't try to remove the Xorg ! since it's a pain to reinstall it again simply use intel instaed of i810 .
For your default depht i guess there is something wrong in your X configuration , i don't have any trouble related to this under Slackware 12.0 and i'm using beryl !
If you are planning to use it the best way it's to compile it from Source code , because there is a lot of dependencies that you can't know them if you install them from the standard Slac packages .
Regards.
Default Depth=32 is not working so I have moved back to 24.
Now My main problem is beryl.
Today I did lot of things.
I begin with this guide.
http://wiki.beryl-project.org/wiki/I...l_on_Slackware
Deleted X and can't start the X after I log off.
After that I dont know what happened as I keep on trying so many things to get the X working, I can't start KDE as well.
Then I fixed that don't know how it hapened but its working.
Now I can't login with non-root user as I told earlier.
Then I moved on to this guide.
'+'
I downloaded all the packages, and make entries in xorg.conf though I used kororaa xorg.conf file to make changes as per the article.
Now I can't run compiz not even its settings manager.
Can you give me steps to install beryl?
----------------------
Do you know repository for slackpkg (slackware 12)?
I will try beryl with it.