Printable View
Hey, I have a few windows compies on this network all hooked through a d-link wireless router (though all compies are wired in including this one) and i was wondering if it was possible to connect to their files to copy them etc.? also if anyone can answer my usb problem, how do i get my usb drive working? (i have no idea about it)
for the windows network use samba. im a debian user mainly, never tried slackware. Samba is available at sourceforge.net so you can compile it from source. For your USB issue use the command lsusb and post the output. If it shows up with nothing then you need to install the usb modules i think.
root@krachun:~# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0781:5406 SanDisk Corp.
root@krachun:~#
now what? it recognizes what i have and has the company right. but how can i get it to let me look on the drive? then later (after i have that down) how to in the gui. figure more complex then the shortcut.
and for the lisa daemon it says its not working correctly: The Lisa daemon does not appear to be running.
In order to use the LAN Browser the Lisa daemon must be installed and activated by the system administrator.
Samba came installed with Slackware. You just need to configure it. Maybe thiscan get you started?
Well, you need to tell the machine (as root) that you trust users to mount this device, and you need to specify where.Quote:
Originally Posted by stinkoman
I don't know what is the official procedure, but this is what works for me:
First! Just after plugging in the device, run this command:
It takes some getting used to before you can easily interpret the output, but after three or four times you know what you're looking for. Look for a line like this:Code:dmesg | tail
sda : sda1
That means your device is recognized by the kernel as sda1. So it's full name is /dev/sda1
Now you know what your device is called, you can mount it as root. For example:
But you want to be able to mount it as user. That sort of permissions is set by /etc/fstab. So add this entry to fstab:Code:mount /dev/sda1 /mnt/pendrive
Where /mnt/pendrive is a location you may specify. The directory needs to exist, so if it doesn't, create it.Code:/dev/sda1 /mnt/pendrive auto users,noauto,rw
Mounts the drive. With the proper deamons running, you can also get Slack to do this for you. From the GUI. Try to run Kwikdisk from the system menu. This may just be what you're looking for. If it's not, post here how and why. It's not the only way to get things done. But you may need to start up some deamons.Code:mount /mnt/pendrive
But is it installed?Quote:
Originally Posted by stinkoman
Can you post the output of this command:
Important further reading:Code:ls -l /etc/rc.d
Slackware Linux Essentials
Quote:
root@krachun:~# ls -l /etc/rc.d
total 237
lrwxrwxrwx 1 root root 4 2008-01-06 08:15 rc.0 -> rc.6*
-rwxr-xr-x 1 root root 1160 2006-09-25 04:33 rc.4*
-rwxr-xr-x 1 root root 6782 2006-09-25 04:33 rc.6*
-rwxr-xr-x 1 root root 2322 2006-09-25 04:33 rc.K*
-rwxr-xr-x 1 root root 10022 2006-09-25 04:33 rc.M*
-rwxr-xr-x 1 root root 14408 2006-09-25 04:33 rc.S*
-rwxr-xr-x 1 root root 466 2004-11-05 03:20 rc.acpid*
-rwxr-xr-x 1 root root 1614 2006-08-04 22:50 rc.alsa*
-rw-r--r-- 1 root root 1032 2003-02-01 22:47 rc.atalk
-rw-r--r-- 1 root root 4178 2006-05-03 19:31 rc.bind
-rw-r--r-- 1 root root 3942 2006-08-17 01:19 rc.cups
-rw-r--r-- 1 root root 512 2006-08-08 00:02 rc.dnsmasq
-rwxr-xr-x 1 root root 119 2004-05-30 00:19 rc.font.new*
-rwxr-xr-x 1 root root 1148 2008-01-06 08:31 rc.gpm*
-rwxr-xr-x 1 root root 2243 2006-09-20 19:50 rc.hotplug*
-rw-r--r-- 1 root root 401 2003-03-05 16:28 rc.httpd
-rwxr-xr-x 1 root root 8325 2006-09-20 22:48 rc.inet1*
-rw-r--r-- 1 root root 3543 2008-01-06 08:31 rc.inet1.conf
-rwxr-xr-x 1 root root 4477 2006-09-20 22:44 rc.inet2*
-rwxr-xr-x 1 root root 497 2003-09-11 23:27 rc.inetd*
-rw-r--r-- 1 root root 1924 2003-09-13 19:10 rc.ip_forward
-rwxr-xr-x 1 root root 272 2006-09-25 04:33 rc.local*
lrwxrwxrwx 1 root root 19 2008-01-06 08:15 rc.modules -> rc.modules-2.4.33.3*
-rwxr-xr-x 1 root root 25553 2006-09-01 04:31 rc.modules-2.4.33.3*
-rw-r--r-- 1 root root 2300 2006-09-01 22:15 rc.mysqld
-rwxr-xr-x 1 root root 2444 2006-09-20 23:05 rc.nfsd*
-rwxr-xr-x 1 root root 5090 2006-08-16 16:48 rc.pcmcia*
-rw-r--r-- 1 root root 2000 2006-09-21 18:07 rc.rpc
-rw-r--r-- 1 root root 791 2006-09-02 02:14 rc.samba
-rw-r--r-- 1 root root 1169 2006-05-27 16:24 rc.saslauthd
-rwxr-xr-x 1 root root 967 2006-09-25 04:33 rc.scanluns*
-rwxr-xr-x 1 root root 687 2002-06-04 17:09 rc.sendmail*
-rw-r--r-- 1 root root 2895 2006-09-25 04:47 rc.serial
-rwxr-xr-x 1 root root 1222 2006-09-28 17:17 rc.sshd*
-rwxr-xr-x 1 root root 860 2004-05-02 18:07 rc.syslog*
-rwxr-xr-x 1 root root 1740 2006-09-25 04:33 rc.sysvinit*
-rwxr-xr-x 1 root root 4711 2006-09-13 20:11 rc.udev*
-rwxr-xr-x 1 root root 9453 2006-08-16 16:20 rc.wireless*
-rw------- 1 root root 7320 2006-08-16 16:20 rc.wireless.conf
-rwxr-xr-x 1 root root 2323 2005-07-31 19:56 rc.yp*
I assume this means no? where can i get it if it isnt installed?
and i get an error when trying to mount the USB hard drive.
Quote:
mount: /dev/sda1 is not a valid block device
wait i got the usb workign i think, i changed 'pendrive' to 'sda'
and i can only view the contents via the cli not the gui
Read up on Samba, you'll need to know more than I can give you here. I don't run Microsoft, so I can't tell you anything about their side of the procedure.
But a simple
Should do a whole lot on your Linux machine. You'd still need a configuration file, but that isn't the difficult part. Google 'samba howto'. Please feel free to post back if that doesn't work for you. Or if it does, others may be reading who might be interested in the solution.Code:chmod +x /etc/rc.d/rc.samba
/etc/rc.d/rc.samba start
_____
Good you got that USB thing sorted. I should have mentioned that the /mnt directory is different in every distro... even Slack derived ones. Make it as you want it and adjust /etc/fstab accordingly. You can mount things where you want them. For a long time I mounted them under /home/freston/usb as a directory in my home directory. The only thing Linux asks is that the directory exists. Make one if it doesn't.
new usb error:
Quote:
Called: mount /dev/sda1
[mntent]: warning: no final newline at the end of /etc/fstab
mount: /dev/sda1 is not a valid block device
Yes that happens ;-)
Add a new line (just press enter) after the last line of fstab. The logic of the system needs it :rolleyes:
and yet another error
Quote:
Called: mount /dev/sda1
[mntent]: warning: no final newline at the end of /etc/fstab
mount: /dev/sda1 is not a valid block device