Slackware 12.0 - Kernel 2.6.22 - Failing and Booting to init 1
I just recently installed Slack 12.0 and upgraded the kernel to 2.6.22.
The only real issue I am having is that during boot, is that it makes it almost completely through the initialization when it gets through mounting the non-root local file systems and begins kicks out to init 1.
The last few lines of text are:
Using /etc/random-seed to initialize /dev/urandom.
smbd: no process killed
nmbd: no process killed
Unmounting remote filesystems.
Shutting down PCMCIA services: cards pcmcia rsrc_nonstatic pcmcia_core
Sending all process the SIGHUP signal.
Waiting for processes to hang up......
Sending all processes the SIGTERM signal.
Waiting for processes to terminate......
Sending all processes the SIGKILL signal.
Waiting for processes to exit......
Going to single user mode...
INIT: Switching to runlevel: 1
I sign in w/o problems and 'dmesg| tail' gives the following results:
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
scsi 0:0:0:0: Direct-Access USB MASS STORAGE DEVICE 0.10 PQ: 0 ANSI: 2
usb-storage: device scan complete
Adding 996020k swap on /dev/hdc3. Priority:-1 extents:1 across:996020k
Adding 998384k swap on /dev/hdd6. Priority:-2 extents:1 across:998384k
EXT3 FS on hdd1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
After looking around a bit, I do an 'init 3' and the runlevel is switched w/o problem (not seeing any errors as it switches runlevel).
Bouncing back to my previous kernel doesn't seem to fix the issue either.
I am currently at a loss and any ideas would be greatly appreciated.