Dell XPS 1640 wifi getting discovered but not connected

[gopu]

I am trying to install Suse 11.1 in DELL XPS 1640, which has Intel Wifi Link 5100 adapter. It discovers all the wifi correctly but unable to connect.

You have any solution?

[reed9]

Open a terminal, type dmesg and post the output please. Enclose the output in code tags as explained here.

Are you connecting to a WPA encrypted network?

[gopu]

No the network is not encrypted. Please find the dmesg result below:

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
Command line: root=/dev/disk/by-id/ata-ST9320421ASG_5TJ0GFZH-part7 resume=/dev/disk/by-id/ata-ST9320421ASG_5TJ0GFZH-part6 splash=silent vga=0x345
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
 BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
 BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
 BIOS-e820: 00000000bf8a7000 - 00000000bf9bb000 (usable)
 BIOS-e820: 00000000bf9bb000 - 00000000bfa0f000 (reserved)
 BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
 BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
 BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
 BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
 BIOS-e820: 00000000bfd1f000 - 00000000bfd63000 (usable)
 BIOS-e820: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS)
 BIOS-e820: 00000000bfd9f000 - 00000000bfde4000 (usable)
 BIOS-e820: 00000000bfde4000 - 00000000bfdff000 (ACPI data)
 BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
 BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbfe00 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
 0000000000 - 00bfe00000 page 2M
kernel direct mapping tables up to bfe00000 @ 8000-c000
last_map_addr: bfe00000 end: bfe00000
RAMDISK: 37a50000 - 37fefebd
ACPI: RSDP 000F7920, 0024 (r2 PTLTD )
ACPI: XSDT BFDF7CE2, 0074 (r1 DELL    M09      6040000  LTP        0)
ACPI: FACP BFDE8000, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
ACPI: DSDT BFDE9000, 6E30 (r2 Intel  CANTIGA   6040000 INTL 20050624)
ACPI: FACS BFD9EFC0, 0040
ACPI: HPET BFDFED16, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: MCFG BFDFED4E, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: APIC BFDFED8A, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: BOOT BFDFEDF2, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SLIC BFDFEE1A, 0176 (r1 DELL    M09      6040000  LTP        0)
ACPI: OSFR BFDFEF90, 0070 (r1 DELL   DELL      6040000 ASL        61)
ACPI: SSDT BFDE7000, 0655 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: SSDT BFDE6000, 0259 (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
ACPI: SSDT BFDE5000, 020F (r1  PmRef    ApTst     3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bfe00000
Bootmem setup node 0 0000000000000000-00000000bfe00000
  NODE_DATA [000000000000a000 - 0000000000021fff]
  bootmap [0000000000022000 -  0000000000039fbf] pages 18
(6 early reservations) ==> bootmem [0000000000 - 00bfe00000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000bf27b8]    TEXT DATA BSS ==> [0000200000 - 0000bf27b8]
  #3 [0037a50000 - 0037fefebd]          RAMDISK ==> [0037a50000 - 0037fefebd]
  #4 [000009c400 - 0000100000]    BIOS reserved ==> [000009c400 - 0000100000]
  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000f79d0] 000f79d0
 [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001200000-ffff8800041fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
    0: 0x00000000 -> 0x0000009c
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9bb
    0: 0x000bfa0f -> 0x000bfb08
    0: 0x000bfd0f -> 0x000bfd18
    0: 0x000bfd1f -> 0x000bfd63
    0: 0x000bfd9f -> 0x000bfde4
    0: 0x000bfdff -> 0x000bfe00
On node 0 totalpages: 785117
  DMA zone: 1280 pages, LIFO batch:0
  DMA32 zone: 768905 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
PM: Registered nosave memory: 00000000bf9bb000 - 00000000bfa0f000
PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
PM: Registered nosave memory: 00000000bfd18000 - 00000000bfd1f000
PM: Registered nosave memory: 00000000bfd63000 - 00000000bfd9f000
PM: Registered nosave memory: 00000000bfde4000 - 00000000bfdff000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 62240 bytes of per cpu data
NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 770185
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/ata-ST9320421ASG_5TJ0GFZH-part7 resume=/dev/disk/by-id/ata-ST9320421ASG_5TJ0GFZH-part6 splash=silent vga=0x345
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2260.984 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Memory: 3074944k/3143680k available (2731k kernel code, 65524k reserved, 2620k data, 1472k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.96 BogoMIPS (lpj=9043936)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
SELinux:  Disabled at boot.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 1225 Objects with 66 Devices 244 Methods 42 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 27 Objects with 0 Devices 16 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 12 Objects with 0 Devices 9 Methods 0 Regions
 tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 16624912
Detected 16.624 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4521.97 BogoMIPS (lpj=9043941)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9043.93 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-1 level NODE
   groups: 0-1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-1 level NODE
   groups: 0-1
net_namespace: 1936 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................................................................................................
Initialized 40/42 Regions 14/14 Fields 27/27 Buffers 43/43 Packages (1280 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: Dell Inc.
ACPI: DMI Product Name: Studio XPS 1640
ACPI: DMI Product Version: A053
ACPI: DMI Board Name: 0U785D
ACPI: DMI BIOS Vendor: Dell Inc.
ACPI: DMI BIOS Date: 12/12/2008
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
.
Executed 1 _INI methods requiring 2 _STA executions (examined 75 objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 7 Runtime GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f]
PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f]
PCI: 0000:00:1a.2 reg 20 io port: [1840, 185f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc404800, fc404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc400000, fc403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc404c00, fc404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [18f0, 18f7]
PCI: 0000:00:1f.2 reg 14 io port: [18e4, 18e7]
PCI: 0000:00:1f.2 reg 18 io port: [18e8, 18ef]
PCI: 0000:00:1f.2 reg 1c io port: [18e0, 18e3]
PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18df]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc404000, fc4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 10 64bit mmio: [0, ff]
PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [cfef0000, cfefffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: 0000:01:00.1 reg 10 32bit mmio: [cfeec000, cfeeffff]
pci 0000:01:00.1: supports D1
pci 0000:01:00.1: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [cfe00000, cfefffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [f6000000, f7ffffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff]
PCI: 0000:04:00.0 reg 10 64bit mmio: [f8000000, f8001fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 io port: [4000, 4fff]
PCI: bridge 0000:00:1c.1 32bit mmio: [f8000000, f9ffffff]
PCI: bridge 0000:00:1c.1 64bit mmio pref: [f2000000, f3ffffff]
PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [fa000000, fbffffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [f4000000, f5ffffff]
PCI: 0000:08:00.0 reg 10 64bit mmio: [fc000000, fc00ffff]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: PME# disabled
PCI: bridge 0000:00:1c.5 32bit mmio: [fc000000, fc0fffff]
PCI: 0000:09:01.0 reg 10 32bit mmio: [fc100000, fc1007ff]
pci 0000:09:01.0: supports D1
pci 0000:09:01.0: supports D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.0: PME# disabled
PCI: 0000:09:01.1 reg 10 32bit mmio: [fc100800, fc1008ff]
pci 0000:09:01.1: supports D1
pci 0000:09:01.1: supports D2
pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.1: PME# disabled
PCI: 0000:09:01.2 reg 10 32bit mmio: [fc100c00, fc100cff]
pci 0000:09:01.2: supports D1
pci 0000:09:01.2: supports D2
pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.2: PME# disabled
PCI: 0000:09:01.3 reg 10 32bit mmio: [fc101000, fc1010ff]
pci 0000:09:01.3: supports D1
pci 0000:09:01.3: supports D2
pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [fc100000, fc1fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:02: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:04: ioport range 0x400-0x47f has been reserved
system 00:04: ioport range 0x680-0x69f has been reserved
system 00:04: ioport range 0x480-0x48f has been reserved
system 00:04: ioport range 0xffff-0xffff has been reserved
system 00:04: ioport range 0xffff-0xffff has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11ff has been reserved
system 00:04: ioport range 0x164e-0x164f has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0x900-0x97f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:09: iomem range 0xfed10000-0xfed13fff could not be reserved
system 00:09: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:09: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:09: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:09: iomem range 0xfed45000-0xfed8ffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xcfe00000-0xcfefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
pci 0000:00:1c.1:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
pci 0000:00:1c.3:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5:   IO window: disabled
pci 0000:00:1c.5:   MEM window: 0xfc000000-0xfc0fffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xfc100000-0xfc1fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [cfe00000, cfefffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [3000, 3fff]
bus: 02 index 1 mmio: [f6000000, f7ffffff]
bus: 02 index 2 mmio: [f0000000, f1ffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [4000, 4fff]
bus: 04 index 1 mmio: [f8000000, f9ffffff]
bus: 04 index 2 mmio: [f2000000, f3ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 06 index 0 io port: [5000, 5fff]
bus: 06 index 1 mmio: [fa000000, fbffffff]
bus: 06 index 2 mmio: [f4000000, f5ffffff]
bus: 06 index 3 mmio: [0, 0]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [fc000000, fc0fffff]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 mmio: [0, 0]
bus: 09 index 0 mmio: [0, 0]
bus: 09 index 1 mmio: [fc100000, fc1fffff]
bus: 09 index 2 mmio: [0, 0]
bus: 09 index 3 io port: [0, ffff]
bus: 09 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
 done
Freeing initrd memory: 5759k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1241230879.805:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1504
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 11550k, total 16384k
vesafb: mode is 1400x1050x16, linelength=2816, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 113987 bytes
bootsplash: ...found (1400x1050, 45904 bytes, v3).
Console: switching to colour frame buffer device 171x61
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver8 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
TCP cubic registered
registered taskstats version 1
Freeing unused kernel memory: 1472k freed
Write protecting the kernel read-only data: 5024k
ACPI: No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 4346
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 4346
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404300 irq 4346
ata6: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404380 irq 4346
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9320421ASG, DE16, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD16, max UDMA/100
ata2.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST9320421ASG     DE16 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640S HD16 PQ: 0 ANSI: 5
ACPI: SSDT BFD1AC20, 0265 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00C5) - 6 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT BFD18620, 0575 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00C6) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFD19CA0, 01CF (r1  PmRef    ApIst     3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00D0) - 12 Objects with 0 Devices 12 Methods 0 Regions
ACPI: SSDT BFD19F20, 008D (r1  PmRef    ApCst     3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00D2) - 3 Objects with 0 Devices 3 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to TSC halts in idle
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (60 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (51 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ02] (58 C)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
USB Universal Host Controller Interface driver v3.0
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 <<6>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
 sda5<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
 sda6<6>usb usb1: configuration #1 chosen from 1 choice
 sda7<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
Clocksource tsc unstable (delta = -102365400 ns)
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800
usb 1-1: New USB device found, idVendor=0a5c, idProduct=4500
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: BCM2046B1
usb 1-1: Manufacturer: Broadcom
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 1-1:1.0: hub_port_status failed (err = -71)
hub 1-1:1.0: hub_port_status failed (err = -71)
usb 1-1: USB disconnect, address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1a.7
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-6: new high speed USB device using ehci_hcd and address 3
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-6: configuration #1 chosen from 1 choice
usb 4-6: New USB device found, idVendor=05ca, idProduct=18a0
usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=9
usb 4-6: Product: Integrated Webcam
usb 4-6: Manufacturer: Ricoh co. Ltd.
usb 4-6: SerialNumber: CN0TX6137248789PAG9A
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
usb 1-1: new full speed USB device using uhci_hcd and address 3
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
PM: Starting manual resume from disk
usb 1-1: New USB device found, idVendor=0a5c, idProduct=4500
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: BCM2046B1
usb 1-1: Manufacturer: Broadcom
usb 1-1.1: new full speed USB device using uhci_hcd and address 4
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.1: New USB device found, idVendor=413c, idProduct=8157
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.2: new full speed USB device using uhci_hcd and address 5
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: New USB device found, idVendor=413c, idProduct=8158
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver hiddev
input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1
input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
udevd version 128 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: PC Speaker as /devices/platform/pcspkr/input/input4
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Linux video capture interface: v2.00
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button (FF) [PWRF]
ACPI: WMI: Mapper loaded
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: Device needs an ACPI driver
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
tg3.c:v3.94 (August 14, 2008)
vendor=8086 device=294a
tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:08:00.0: setting latency timer to 64
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input8
ACPI: Lid Switch [LID0]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input9
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0)
input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb4/4-6/4-6:1.0/input/input10
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
eth0: Tigon3 [partno(BCM95784M) rev 5784100 PHY(5784)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:19:df:2b:1f
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
vendor=8086 device=2448
sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
vendor=8086 device=2448
ohci1394 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fc100000-fc1007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3051:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3055:    hp_outs=2 (0xa/0xf/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3056:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3064:    inputs: mic=0xe, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
vendor=8086 device=2a41
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
vendor=8086 device=2942
iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
vendor=8086 device=2942
iwlagn 0000:04:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000000000000000]
Adding 2104472k swap on /dev/sda6.  Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1241211100.004:2): operation="profile_load" name="/bin/ping" name2="default" pid=2169
type=1505 audit(1241211100.028:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2217
type=1505 audit(1241211100.076:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2218
type=1505 audit(1241211100.124:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2219
type=1505 audit(1241211100.172:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2220
type=1505 audit(1241211100.216:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2221
type=1505 audit(1241211100.260:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2222
type=1505 audit(1241211100.308:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2223
type=1505 audit(1241211100.376:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2224
type=1505 audit(1241211100.416:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2225
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
firmware: requesting intel-ucode/06-17-06
firmware: requesting intel-ucode/06-17-06
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ADDRCONF(NETDEV_UP): eth0: link is not ready
vendor=8086 device=2942
iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
firmware: requesting iwlwifi-5000-1.ucode
bootsplash: status on console 0 changed to on
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: authenticate with AP 00:14:bf:71:47:fd
wlan0: authenticated
wlan0: associate with AP 00:14:bf:71:47:fd
wlan0: RX AssocResp from 00:14:bf:71:47:fd (capab=0x421 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: disassociating by local choice (reason=3)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-1 level NODE
   groups: 0-1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-1 level NODE
   groups: 0-1
wlan0: no IPv6 routers present
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
CE: hpet increasing min_delta_ns to 15000 nsec
wlan0: authenticate with AP 00:14:bf:71:47:fd
wlan0: authenticated
wlan0: associate with AP 00:14:bf:71:47:fd
wlan0: RX AssocResp from 00:14:bf:71:47:fd (capab=0x421 status=0 aid=3)
wlan0: associated
wlan0: disassociating by local choice (reason=3)

[reed9]

I see this: iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54

You appear to have a wireless-n capable card. Is your router by chance running in 802.11n mode? I believe there are still issues with wireless-n, so change to g if it is.

And then you're getting this disassociation from the network: wlan0: disassociating by local choice (reason=3)

I might try stopping the networkmanager daemon, and unloading and reloading the driver, then try to connect at the command line.

sudo /etc/init.d/NetworkManager stop
sudo modprobe -r iwlagn
sudo modprobe iwlagn
sudo iwlist wlan0 scanning
sudo iwconfig wlan0 essid <name of your network>
sudo dhclient wlan0

EDIT: FYI you can restart the network manager with /etc/init.d/NetworkManager start

[waterhead]

I think that you need a bleeding edge kernel to use 802.11n wireless. You most likely won't get that in Suse.

It is looking for two versions of firmware, check the /lib/firmware folder for both of them.

firmware: requesting intel-ucode/06-17-06
firmware: requesting iwlwifi-5000-1.ucode

I suspect that the first one is for the wired LAN, and the other for the wireless.

[gopu]

Well hardluck for me, the suggested solution did not work.

I get the following output when I do sudo dhcpclient wlan0

wmaster0: unknown hardware address type 801

How would I know if my router is running 802.11n mode??

BTW, the wired land is working even though I don't see anything of intel-ucode/06-17-06 in /lib/firmware

[gopu]

it's working now... not sure how...
May be trying to connect wifi as root user helped, after that even normal user also could connect

[waterhead]

You should go into YaST and make these settings.

Open: YaST-->Network Devices-->Network Settings

Under Global Options:
Select this option:
User Controlled with Network Manager

Under Overview:
Click on the wireless in the list, then the "Edit" button.

Then under the General tab select this:
Device Control
Enable Device Control for Non-root User Via KInternet

Under the Address tab, select this:
Dynamic Address: DHCP

Under the Hardware tab:
Module Name: iwlagn

Save the new configuration and exit. You should probably reboot now.