Find the answer to your Linux question:
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
I recently installed Open Suse 11.3 in a Dell Inspiron e1705 with a Broadcomm 4311 wireless card. I think I've done almost everything I found in all the forums regarding ...
  1. 10-06-2010 #1
    mauriciohg
    mauriciohg is offline
    Just Joined!
    Join Date
    Oct 2010
    Location
    Aurora, IL
    Posts
    12

    Wireless Problems with Suse 11.3 Broadcomm 4311

    I recently installed Open Suse 11.3 in a Dell Inspiron e1705 with a Broadcomm 4311 wireless card. I think I've done almost everything I found in all the forums regarding this problem but I'm still unable to use the wireless conection.
    It's reading it as an "eth0" instead of a "wlan1". I'm new with Linux and lost.... I've uploaded a txt with all the information of the machine that I could read from a thread I found. If you need anymore information, please let me know.
    Thanx...
    Reply With Quote Reply With Quote
  2. 10-07-2010 #2
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    Quote Originally Posted by mauriciohg View Post
    I recently installed Open Suse 11.3 in a Dell Inspiron e1705 with a Broadcomm 4311 wireless card. I think I've done almost everything I found in all the forums regarding this problem but I'm still unable to use the wireless conection.
    It's reading it as an "eth0" instead of a "wlan1". I'm new with Linux and lost.... I've uploaded a txt with all the information of the machine that I could read from a thread I found. If you need anymore information, please let me know.
    Thanx...
    Hello and Welcome.
    Where is the text? I don't see it.
    Is this the thread you were referring too?
    http://www.linuxforums.org/forum/wir...tart-here.html
    Post your info here, using the code tags provided by the forum software, please.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  3. 10-07-2010 #3
    mauriciohg
    mauriciohg is offline
    Just Joined!
    Join Date
    Oct 2010
    Location
    Aurora, IL
    Posts
    12
    Thank you for the quick response and thanks for the welcoming... I don't know what tools I need to make the coding part on the txt file.

    I'm sorry. I'm attaching the txt file. I'm lost here...
    Thanx.



    Code:
    mauriciohg@maulinux:~> /sbin/lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)                                                                                                        
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)                                                                                              
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)                                                                                                 
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)                                                                                                                             
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)                                                                                                                                             
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)                                                                                                                                             
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)                                                                                                                                             
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)                                                                                                                                     
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)                                                                                                                                     
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)                                                                                                                                     
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)                                                                                                                                     
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)                                                                                                                                       
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)                                                                                                                                                         
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)                                                                                                                                          
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)                                                                                                                               
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)                                                                                                                                                    
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)                                                                                                                                               
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller                                                                                                                                                         
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)                                                                                                                                     
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)                                                                                                                                          
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)                                                                                                                                                    
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
    Code:
    mauriciohg@maulinux:~> /usr/sbin/iwconfig
lo        no wireless extensions.

eth1      IEEE 802.11  Access Point: Not-Associated   
          Link Quality:5  Signal level:0  Noise level:0
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

eth0      no wireless extensions.
    Code:
    mauriciohg@maulinux:~> lsmod | grep b43
mauriciohg@maulinux:~> dmesg | grep b43
mauriciohg@maulinux:~> iwconfig wlan0
Absolute path to 'iwconfig' is '/usr/sbin/iwconfig', so running it may require superuser privileges (eg. root).
mauriciohg@maulinux:~> su
Password: 
maulinux:/home/mauriciohg # iwconfig wlan0
wlan0     No such device

maulinux:/home/mauriciohg # iwconfig eth1
eth1      IEEE 802.11bg  ESSID:""  
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated   
          Bit Rate:54 Mb/s   Tx-Power:24 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Managementmode:All packets received
          Link Quality=5/5  Signal level=0 dBm  Noise level=0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
    Code:
    maulinux:/home/mauriciohg # lsmod
Module                  Size  Used by
ip6t_LOG                5150  6 
xt_tcpudp               2107  2 
xt_pkttype               912  3 
ipt_LOG                 5119  6 
xt_limit                1705  12 
snd_pcm_oss            47613  0 
snd_mixer_oss          16751  1 snd_pcm_oss
snd_seq                57343  0 
snd_seq_device          6598  1 snd_seq
edd                     8720  0 
af_packet              19512  0 
ip6t_REJECT             4311  3 
nf_conntrack_ipv6      18225  4 
ip6table_raw            1187  1 
xt_NOTRACK               816  4 
ipt_REJECT              2152  3 
cpufreq_conservative    10064  0 
cpufreq_userspace       2583  0 
xt_state                1162  8 
iptable_raw             1246  1 
cpufreq_powersave        914  0 
iptable_filter          1418  1 
acpi_cpufreq            7439  0 
speedstep_lib           4985  0 
ip6table_mangle         1588  0 
nf_conntrack_netbios_ns     1382  0 
mperf                   1255  1 acpi_cpufreq
nf_conntrack_ipv4       8691  4 
nf_conntrack           75628  5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4          1201  1 nf_conntrack_ipv4
ip_tables              12172  2 iptable_raw,iptable_filter
ip6table_filter         1359  1 
ip6_tables             13508  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables               17098  16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables
fuse                   65789  1 
loop                   14694  0 
dm_mod                 73457  0 
snd_hda_codec_idt      58593  1 
snd_hda_intel          24886  2 
snd_hda_codec          98635  2 snd_hda_codec_idt,snd_hda_intel
firewire_ohci          23817  0 
snd_hwdep               6164  1 snd_hda_codec
firewire_core          52354  1 firewire_ohci
b44                    32450  0 
snd_pcm                87882  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
dell_laptop             6177  0 
crc_itu_t               1435  1 firewire_core
sdhci_pci               7110  0 
ssb                    55830  1 b44
iTCO_wdt               10022  0 
snd_timer              21669  2 snd_seq,snd_pcm
sr_mod                 14671  0 
rfkill                 17298  1 dell_laptop
sdhci                  20020  1 sdhci_pci
ohci1394               30324  0 
lib80211_crypt_tkip     8588  0 
pcmcia                 58755  1 ssb
iTCO_vendor_support     2570  1 iTCO_wdt
snd                    65724  14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
sg                     27872  0 
cdrom                  38085  1 sr_mod
dcdbas                  7929  1 dell_laptop
joydev                  9354  0 
pcspkr                  1614  0 
i2c_i801                9949  0 
mmc_core               72345  2 ssb,sdhci
ieee1394               88668  1 ohci1394
pcmcia_core            19994  1 pcmcia
ac                      3083  0 
soundcore               7379  1 snd
battery                 9730  0 
wl                   1963845  0 
snd_page_alloc          8041  2 snd_hda_intel,snd_pcm
ext4                  365656  2 
jbd2                   83102  1 ext4
crc16                   1403  1 ext4
i915                  313919  2 
drm_kms_helper         29180  1 i915
drm                   180503  3 i915,drm_kms_helper
i2c_algo_bit            5604  1 i915
button                  5449  1 i915
video                  21205  1 i915
intel_agp              27995  2 i915
fan                     3539  0 
processor              40761  2 acpi_cpufreq
ata_generic             2743  0 
thermal                17357  0 
thermal_sys            14678  4 video,fan,processor,thermal
    Code:
    maulinux:/home/mauriciohg # lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
        Subsystem: Dell Device [1028:01cd]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
        Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
        Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
        Subsystem: Dell Device [1028:01cd]
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: i801_smbus
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
        Subsystem: Dell Inspiron 9400 Laptop [1028:01cd]
        Kernel driver in use: b44
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: ohci1394
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
        Subsystem: Dell Device [1028:01cd]
        Kernel driver in use: sdhci-pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
        Subsystem: Dell Device [1028:01cd]
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)
        Subsystem: Dell Device [1028:01cd]
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
        Subsystem: Dell Wireless 1390 WLAN Mini-Card [1028:0007]
        Kernel driver in use: wl
    Code:
    maulinux:/home/mauriciohg # dmesg
[    0.000000] Linux version 2.6.34.7-0.3-desktop (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP PREEMPT 2010-09-20 15:27:38 +0200
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f6d3400 (usable)
[    0.000000]  BIOS-e820: 000000003f6d3400 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f6d3 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03F800000 mask FFF800000 uncachable
[    0.000000]   2 base 03F700000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f6d3400 (usable)
[    0.000000]  modified: 000000003f6d3400 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0007000 (reserved)
[    0.000000]  modified: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037000000 page 2M
[    0.000000]  0037000000 - 00371fe000 page 4k
[    0.000000] kernel direct mapping tables up to 371fe000 @ 15000-1f000
[    0.000000] RAMDISK: 375db000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 00afc000 - 015100a8
[    0.000000] Move RAMDISK from 00000000375db000 - 0000000037fef0a7 to 00afc000 - 015100a7
[    0.000000] ACPI: RSDP 000fc370 00014 (v00 DELL  )
[    0.000000] ACPI: RSDT 3f6d3b1f 00040 (v01 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: FACP 3f6d4800 00074 (v01 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: DSDT 3f6d5400 03AEC (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 3f6e3c00 00040
[    0.000000] ACPI: APIC 3f6d5000 00068 (v01 DELL    M07     27D60609 ASL  00000047)
[    0.000000] ACPI: MCFG 3f6d4fc0 0003E (v16 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: BOOT 3f6d4bc0 00028 (v01 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: SSDT 3f6d4201 00233 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f6d403b 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.000000] ACPI: SSDT 3f6d3b5f 004DC (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] could not find any ACPI SRAT memory areas.
[    0.000000] failed to get NUMA memory information from SRAT table
[    0.000000] NUMA - single node, flat memory mode
[    0.000000] Node: 0, start_pfn: 0, end_pfn: 3f6d3
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 
[    0.000000] node 0 pfn: [0 - 3f6d3]
[    0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3ee00
[    0.000000] remove_active_range (0, 257536, 259584)
[    0.000000] Reserving total of 800 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 36800 max_low_pfn ~ 371fe
[    0.000000] max_pfn = 3f6d3
[    0.000000] 132MB HIGHMEM available.
[    0.000000] 881MB LOWMEM available.
[    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[    0.000000] Low memory ends at vaddr f71fe000
[    0.000000] node 0 will remap to vaddr f6800000 - f7000000
[    0.000000] allocate_pgdat: node 0 NODE_DATA f6800000
[    0.000000] remap_numa_kva: node 0
[    0.000000] remap_numa_kva: f6800000 to pfn 0003ee00
[    0.000000] remap_numa_kva: f6a00000 to pfn 0003f000
[    0.000000] remap_numa_kva: f6c00000 to pfn 0003f200
[    0.000000] remap_numa_kva: f6e00000 to pfn 0003f400
[    0.000000] High memory starts at vaddr f71fe000
[    0.000000]   mapped low ram: 0 - 371fe000
[    0.000000]   low ram: 0 - 371fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000371fe
[    0.000000]   HighMem  0x000371fe -> 0x0003f6d3
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003ee00
[    0.000000]     0: 0x0003f600 -> 0x0003f6d3
[    0.000000] On node 0 totalpages: 257635
[    0.000000] free_area_init_node: node 0, pgdat f6800000, node_mem_map f6802020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1732 pages used for memmap
[    0.000000]   Normal zone: 219962 pages, LIFO batch:31
[    0.000000]   HighMem zone: 266 pages used for memmap
[    0.000000]   HighMem zone: 31691 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1600000 s34900 r0 d22444 u1048576
[    0.000000] pcpu-alloc: s34900 r0 d22444 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 255605
[    0.000000] Policy zone: HighMem
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HTS541060G9SA00_MPBCP0XGJM02XG-part6 resume=/dev/disk/by-id/ata-Hitachi_HTS541060G9SA00_MPBCP0XGJM02XG-part5 splash=silent quiet vga=0x34b
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (45 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000200000 - 0000af2f64]   TEXT DATA BSS
[    0.000000]   #3 [000009f000 - 0000100000]   BIOS reserved
[    0.000000]   #4 [0000af3000 - 0000afb188]             BRK
[    0.000000]   #5 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #6 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #7 [0000015000 - 000001c000]         PGTABLE
[    0.000000]   #8 [0000afc000 - 0001511000]     NEW RAMDISK
[    0.000000]   #9 [003ee00000 - 003f600000]         KVA RAM
[    0.000000]   #10 [0036800000 - 0037000000]          KVA PG
[    0.000000]   #11 [0001511000 - 0001512000]         BOOTMEM
[    0.000000]   #12 [0001512000 - 0001512004]         BOOTMEM
[    0.000000]   #13 [0001512040 - 0001512100]         BOOTMEM
[    0.000000]   #14 [0001512100 - 00015121a4]         BOOTMEM
[    0.000000]   #15 [00015121c0 - 00015151c0]         BOOTMEM
[    0.000000]   #16 [00015151c0 - 00015151dc]         BOOTMEM
[    0.000000]   #17 [0001515200 - 0001515e00]         BOOTMEM
[    0.000000]   #18 [0001515e00 - 0001515e2f]         BOOTMEM
[    0.000000]   #19 [0001515e40 - 0001516014]         BOOTMEM
[    0.000000]   #20 [0001516040 - 0001516080]         BOOTMEM
[    0.000000]   #21 [0001516080 - 00015160c0]         BOOTMEM
[    0.000000]   #22 [00015160c0 - 0001516100]         BOOTMEM
[    0.000000]   #23 [0001516100 - 0001516140]         BOOTMEM
[    0.000000]   #24 [0001516140 - 0001516180]         BOOTMEM
[    0.000000]   #25 [0001516180 - 00015161c0]         BOOTMEM
[    0.000000]   #26 [00015161c0 - 0001516200]         BOOTMEM
[    0.000000]   #27 [0001516200 - 0001516240]         BOOTMEM
[    0.000000]   #28 [0001516240 - 0001516280]         BOOTMEM
[    0.000000]   #29 [0001516280 - 00015162c0]         BOOTMEM
[    0.000000]   #30 [00015162c0 - 00015162d0]         BOOTMEM
[    0.000000]   #31 [0001516300 - 0001516310]         BOOTMEM
[    0.000000]   #32 [0001516340 - 00015163ec]         BOOTMEM
[    0.000000]   #33 [0001516400 - 00015164ac]         BOOTMEM
[    0.000000]   #34 [0001600000 - 000160e000]         BOOTMEM
[    0.000000]   #35 [0001700000 - 000170e000]         BOOTMEM
[    0.000000]   #36 [00015184c0 - 00015184c4]         BOOTMEM
[    0.000000]   #37 [0001518500 - 0001518504]         BOOTMEM
[    0.000000]   #38 [0001518540 - 0001518548]         BOOTMEM
[    0.000000]   #39 [0001518580 - 0001518588]         BOOTMEM
[    0.000000]   #40 [00015185c0 - 0001518660]         BOOTMEM
[    0.000000]   #41 [0001518680 - 00015186c8]         BOOTMEM
[    0.000000]   #42 [0001518700 - 000151c700]         BOOTMEM
[    0.000000]   #43 [000151c700 - 000159c700]         BOOTMEM
[    0.000000]   #44 [000159c700 - 00015dc700]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000371fe:0003f6d3)
[    0.000000] Memory: 1001848k/1039180k available (4442k kernel code, 28692k reserved, 3276k data, 424k init, 127828k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
[    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
[    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
[    0.000000]       .init : 0xc098a000 - 0xc09f4000   ( 424 kB)
[    0.000000]       .data : 0xc0656b80 - 0xc0989ca8   (3276 kB)
[    0.000000]       .text : 0xc0200000 - 0xc0656b80   (4442 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:8448 nr_irqs:424
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1861.922 MHz processor.
[    0.002007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.84 BogoMIPS (lpj=1861922)
[    0.002195] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[    0.002450] Security Framework initialized
[    0.002508] AppArmor: AppArmor initialized
[    0.003010] Mount-cache hash table entries: 512
[    0.003455] mce: CPU supports 6 MCE banks
[    0.003487] CPU0: Thermal monitoring enabled (TM2)
[    0.003494] using mwait in idle threads.
[    0.003522] Performance Events: Core events, core PMU driver.
[    0.003544] ... version:                1
[    0.003548] ... bit width:              40
[    0.003552] ... generic registers:      2
[    0.003557] ... value mask:             000000ffffffffff
[    0.003572] ... max period:             000000007fffffff
[    0.003577] ... fixed-purpose events:   0
[    0.003582] ... event mask:             0000000000000003
[    0.003603] Checking 'hlt' instruction... OK.
[    0.008446] SMP alternatives: switching to UP code
[    0.023223] Unpacking initramfs...
[    0.961030] Freeing initrd memory: 10324k freed
[    0.973351] ACPI: Core revision 20100121
[    1.002191] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    1.003060] Mapping cpu 0 to node 0
[    1.003340] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.013231] CPU0: Genuine Intel(R) CPU           T1350  @ 1.86GHz stepping 08
[    1.016143] Brought up 1 CPUs
[    1.016160] Total of 1 processors activated (3723.84 BogoMIPS).
[    1.017133] devtmpfs: initialized
[    1.018147] regulator: core version 0.5
[    1.018263] regulator: dummy: 
[    1.018319] Time: 20:33:23  Date: 10/06/10
[    1.018490] NET: Registered protocol family 16
[    1.018913] ACPI: bus type pci registered
[    1.019160] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    1.019170] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    1.019175] PCI: Using MMCONFIG for extended config space
[    1.019190] PCI: Using configuration type 1 for base access
[    1.023232] bio: create slab <bio-0> at 0
[    1.029145] ACPI: EC: Look up EC in DSDT
[    1.078688] ACPI: Interpreter enabled
[    1.078698] ACPI: (supports S0 S3 S4 S5)
[    1.078785] ACPI: Using IOAPIC for interrupt routing
[    1.176804] ACPI: No dock devices found.
[    1.176827] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    1.227058] ACPI: PCI Root Bridge [PCI0] (0000:00)

[    1.327557] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    1.327577] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    1.327584] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    1.327602] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    1.327609] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
[    1.327617] pci_root PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
[    1.327634] pci_root PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
[    1.327641] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
[    1.327649] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[    1.327833] pci 0000:00:02.0: reg 10: [mem 0xdff00000-0xdff7ffff]
[    1.327844] pci 0000:00:02.0: reg 14: [io  0xeff8-0xefff]
[    1.327865] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    1.327877] pci 0000:00:02.0: reg 1c: [mem 0xdfec0000-0xdfefffff]
[    1.328009] pci 0000:00:02.1: reg 10: [mem 0xdff80000-0xdfffffff]
[    1.328237] pci 0000:00:1b.0: reg 10: [mem 0xdfebc000-0xdfebffff 64bit]
[    1.328361] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.328370] pci 0000:00:1b.0: PME# disabled
[    1.328561] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.328581] pci 0000:00:1c.0: PME# disabled
[    1.328774] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.328783] pci 0000:00:1c.1: PME# disabled
[    1.328978] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.329006] pci 0000:00:1c.3: PME# disabled
[    1.329157] pci 0000:00:1d.0: reg 20: [io  0xbf80-0xbf9f]
[    1.329317] pci 0000:00:1d.1: reg 20: [io  0xbf60-0xbf7f]
[    1.329464] pci 0000:00:1d.2: reg 20: [io  0xbf40-0xbf5f]
[    1.329625] pci 0000:00:1d.3: reg 20: [io  0xbf20-0xbf3f]
[    1.329769] pci 0000:00:1d.7: reg 10: [mem 0xffa80000-0xffa803ff]
[    1.329902] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.329912] pci 0000:00:1d.7: PME# disabled
[    1.330242] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    1.330265] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    1.330275] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    1.330295] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    1.330307] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    1.330447] pci 0000:00:1f.2: reg 10: [io  0x01f0-0x01f7]
[    1.330460] pci 0000:00:1f.2: reg 14: [io  0x03f4-0x03f7]
[    1.330483] pci 0000:00:1f.2: reg 18: [io  0x0170-0x0177]
[    1.330496] pci 0000:00:1f.2: reg 1c: [io  0x0374-0x0377]
[    1.330520] pci 0000:00:1f.2: reg 20: [io  0xbfa0-0xbfaf]
[    1.330588] pci 0000:00:1f.2: PME# supported from D3hot
[    1.330597] pci 0000:00:1f.2: PME# disabled
[    1.330716] pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
[    1.330903] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    1.330913] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.330934] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.330948] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.331252] pci 0000:0c:00.0: reg 10: [mem 0xdfdfc000-0xdfdfffff]
[    1.331682] pci 0000:0c:00.0: supports D1 D2
[    1.331814] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.331859] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[    1.331878] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    1.331889] pci 0000:00:1c.1:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    1.331913] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.332044] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    1.332054] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    1.332074] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xdfcfffff]
[    1.332088] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[    1.332215] pci 0000:03:00.0: reg 10: [mem 0xdf9fe000-0xdf9fffff]
[    1.332340] pci 0000:03:00.0: supports D1 D2
[    1.332345] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.332365] pci 0000:03:00.0: PME# disabled
[    1.332438] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    1.332445] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[    1.332475] pci 0000:03:01.0: reg 10: [mem 0xdf9fd800-0xdf9fdfff]
[    1.332597] pci 0000:03:01.0: supports D1 D2
[    1.332603] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.332612] pci 0000:03:01.0: PME# disabled
[    1.332696] pci 0000:03:01.1: reg 10: [mem 0xdf9fd400-0xdf9fd4ff]
[    1.332820] pci 0000:03:01.1: supports D1 D2
[    1.332826] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    1.332835] pci 0000:03:01.1: PME# disabled
[    1.332927] pci 0000:03:01.2: reg 10: [mem 0xdf9fd600-0xdf9fd6ff]
[    1.333061] pci 0000:03:01.2: supports D1 D2
[    1.333067] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.333086] pci 0000:03:01.2: PME# disabled
[    1.333161] pci 0000:03:01.3: reg 10: [mem 0xdf9fd700-0xdf9fd7ff]
[    1.333283] pci 0000:03:01.3: supports D1 D2
[    1.333289] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    1.333308] pci 0000:03:01.3: PME# disabled
[    1.333438] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    1.333448] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.333468] pci 0000:00:1e.0:   bridge window [mem 0xdf900000-0xdf9fffff]
[    1.333481] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.333499] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    1.333507] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[    1.333573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.334943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    1.335352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.335675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.336035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.388224] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    1.388715] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[    1.389223] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[    1.389708] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[    1.390208] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    1.390710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    1.391230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    1.391733] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    1.392539] SCSI subsystem initialized
[    1.394270] libata version 3.00 loaded.
[    1.394474] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.394522] vgaarb: loaded
[    1.394637] usbcore: registered new interface driver usbfs
[    1.394685] usbcore: registered new interface driver hub
[    1.394778] usbcore: registered new device driver usb
[    1.395036] PCI: Using ACPI for IRQ routing
[    1.395053] PCI: pci_cache_line_size set to 64 bytes
[    1.395326] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    1.395343] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[    1.395350] reserve RAM buffer: 000000003f6d3400 - 000000003fffffff 
[    1.395634] NetLabel: Initializing
[    1.395639] NetLabel:  domain hash size = 128
[    1.395643] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.395682] NetLabel:  unlabeled traffic allowed by default
[    1.395829] hpet clockevent registered
[    1.395837] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.395860] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.395871] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    1.398080] Switching to clocksource tsc
[    1.404308] AppArmor: AppArmor Filesystem Enabled
[    1.404340] pnp: PnP ACPI init
[    1.404371] ACPI: bus type pnp registered
[    1.520225] pnp 00:02: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    1.520237] pnp 00:02: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    1.520553] pnp 00:03: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    1.520563] pnp 00:03: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    1.520583] pnp 00:03: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    1.520593] pnp 00:03: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    1.524650] pnp: PnP ACPI: found 11 devices
[    1.524666] ACPI: ACPI bus type pnp unregistered
[    1.524702] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[    1.524712] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[    1.524731] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[    1.524739] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.524748] system 00:00: [mem 0x00100000-0x3f6d33ff] could not be reserved
[    1.524766] system 00:00: [mem 0x3f6d3400-0x3f6fffff] has been reserved
[    1.524774] system 00:00: [mem 0x3f700000-0x3f7fffff] has been reserved
[    1.524793] system 00:00: [mem 0x3f700000-0x3fefffff] could not be reserved
[    1.524802] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[    1.524811] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    1.524829] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    1.524838] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[    1.524856] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[    1.524865] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[    1.524873] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[    1.524892] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[    1.524900] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[    1.524919] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    1.524966] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    1.524993] system 00:03: [io  0xf400-0xf4fe] has been reserved
[    1.525005] system 00:03: [io  0x1080-0x10bf] has been reserved
[    1.525023] system 00:03: [io  0x10c0-0x10df] has been reserved
[    1.525031] system 00:03: [io  0x0809] has been reserved
[    1.525060] system 00:08: [io  0x0c80-0x0cff] could not be reserved
[    1.525068] system 00:08: [io  0x0910-0x091f] has been reserved
[    1.525086] system 00:08: [io  0x0920-0x092f] has been reserved
[    1.525094] system 00:08: [io  0x0930-0x097f] has been reserved
[    1.560715] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[    1.560726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[    1.560747] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[    1.560756] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    1.560775] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    1.560783] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    1.560791] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.560813] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff]
[    1.560824] pci 0000:00:1c.0:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
[    1.560848] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[    1.560856] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.560878] pci 0000:00:1c.1:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    1.560889] pci 0000:00:1c.1:   bridge window [mem 0x40400000-0x405fffff 64bit pref]
[    1.560913] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    1.560920] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    1.560950] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xdfcfffff]
[    1.560971] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[    1.560985] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    1.561001] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.561012] pci 0000:00:1e.0:   bridge window [mem 0xdf900000-0xdf9fffff]
[    1.561031] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.561069]   alloc irq_desc for 16 on node -1
[    1.561074]   alloc kstat_irqs on node -1
[    1.561097] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.561108] pci 0000:00:1c.0: setting latency timer to 64
[    1.561135]   alloc irq_desc for 17 on node -1
[    1.561139]   alloc kstat_irqs on node -1
[    1.561159] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.561168] pci 0000:00:1c.1: setting latency timer to 64
[    1.561196]   alloc irq_desc for 19 on node -1
[    1.561200]   alloc kstat_irqs on node -1
[    1.561209] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.561228] pci 0000:00:1c.3: setting latency timer to 64
[    1.561253] pci 0000:00:1e.0: setting latency timer to 64
[    1.561262] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    1.561269] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[    1.561287] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    1.561293] pci_bus 0000:0b: resource 1 [mem 0x40000000-0x401fffff]
[    1.561301] pci_bus 0000:0b: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[    1.561318] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    1.561324] pci_bus 0000:0c: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    1.561331] pci_bus 0000:0c: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[    1.561349] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    1.561355] pci_bus 0000:0d: resource 1 [mem 0xdfa00000-0xdfcfffff]
[    1.561362] pci_bus 0000:0d: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
[    1.561370] pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdf9fffff]
[    1.561387] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    1.561393] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffffffffffff]
[    1.561559] NET: Registered protocol family 2
[    1.561809] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.562695] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.564972] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.566092] TCP: Hash tables configured (established 131072 bind 65536)
[    1.566098] TCP reno registered
[    1.566117] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.566152] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.566511] NET: Registered protocol family 1
[    1.566567] pci 0000:00:02.0: Boot video device
[    1.566885] PCI: CLS 64 bytes, default 64
[    1.567106] Simple Boot Flag at 0x79 set to 0x1
[    1.567700] Scanning for low memory corruption every 60 seconds
[    1.568163] audit: initializing netlink socket (disabled)
[    1.568194] type=2000 audit(1286397203.567:1): initialized
[    1.611440] highmem bounce pool size: 64 pages
[    1.611464] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.612949] VFS: Disk quotas dquot_6.5.2
[    1.613039] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.613518] msgmni has been set to 431
[    1.614011] alg: No test for stdrng (krng)
[    1.614118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.614126] io scheduler noop registered
[    1.614130] io scheduler deadline registered
[    1.614191] io scheduler cfq registered (default)
[    1.614868] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.614989]   alloc irq_desc for 24 on node -1
[    1.614995]   alloc kstat_irqs on node -1
[    1.615026] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    1.615293] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.615386]   alloc irq_desc for 25 on node -1
[    1.615390]   alloc kstat_irqs on node -1
[    1.615416] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    1.615670] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.615763]   alloc irq_desc for 26 on node -1
[    1.615768]   alloc kstat_irqs on node -1
[    1.615793] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[    1.616182] pci-stub: invalid id string ""
[    1.618295] vesafb: framebuffer at 0xc0000000, mapped to 0xf7a80000, using 7500k, total 7872k
[    1.618304] vesafb: mode is 1600x1200x16, linelength=3200, pages=1
[    1.618319] vesafb: scrolling: redraw
[    1.618327] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.619656] bootsplash 3.1.6-2004/03/31: looking for picture...
[    1.619673] bootsplash: silentjpeg size 238929 bytes
[    1.771337] bootsplash: ...found (1600x1200, 114103 bytes, v3).
[    1.773149] bootsplash: silentjpeg size 164791 bytes
[    2.371626] Console: switching to colour frame buffer device 196x71
[    2.810260] fb0: VESA VGA frame buffer device
[    2.815638] Non-volatile memory driver v1.3
[    2.815645] Linux agpgart interface v0.103
[    2.815743] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    2.817728] ata_piix 0000:00:1f.2: version 2.13
[    2.817786] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.817798] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    2.817922] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.818272] scsi0 : ata_piix
[    2.818545] scsi1 : ata_piix
[    2.821966] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    2.821984] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    2.822164] Fixed MDIO Bus: probed
[    2.822190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.822254]   alloc irq_desc for 20 on node -1
[    2.822259]   alloc kstat_irqs on node -1
[    2.822283] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.822324] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.822342] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.822407] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.822470] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    2.822500] ehci_hcd 0000:00:1d.7: debug port 1
[    2.826392] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    2.826437] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[    2.836043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.836151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.836158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.836176] usb usb1: Product: EHCI Host Controller
[    2.836181] usb usb1: Manufacturer: Linux 2.6.34.7-0.3-desktop ehci_hcd
[    2.836187] usb usb1: SerialNumber: 0000:00:1d.7
[    2.836540] hub 1-0:1.0: USB hub found
[    2.836565] hub 1-0:1.0: 8 ports detected
[    2.836830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.836884] uhci_hcd: USB Universal Host Controller Interface driver
[    2.836955] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.836979] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.836987] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.837045] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.837107] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[    2.837214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.837232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.837238] usb usb2: Product: UHCI Host Controller
[    2.837244] usb usb2: Manufacturer: Linux 2.6.34.7-0.3-desktop uhci_hcd
[    2.837260] usb usb2: SerialNumber: 0000:00:1d.0
[    2.837579] hub 2-0:1.0: USB hub found
[    2.837597] hub 2-0:1.0: 2 ports detected
[    2.837815]   alloc irq_desc for 21 on node -1
[    2.837820]   alloc kstat_irqs on node -1
[    2.837841] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.837855] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.837873] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.837900] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.837980] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[    2.838108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.838126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.838132] usb usb3: Product: UHCI Host Controller
[    2.838138] usb usb3: Manufacturer: Linux 2.6.34.7-0.3-desktop uhci_hcd
[    2.838144] usb usb3: SerialNumber: 0000:00:1d.1
[    2.838458] hub 3-0:1.0: USB hub found
[    2.838480] hub 3-0:1.0: 2 ports detected
[    2.838679]   alloc irq_desc for 22 on node -1
[    2.838684]   alloc kstat_irqs on node -1
[    2.838705] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    2.838718] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.838736] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.838753] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.838838] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[    2.838958] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.838965] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.838971] usb usb4: Product: UHCI Host Controller
[    2.838976] usb usb4: Manufacturer: Linux 2.6.34.7-0.3-desktop uhci_hcd
[    2.838993] usb usb4: SerialNumber: 0000:00:1d.2
[    2.839347] hub 4-0:1.0: USB hub found
[    2.839360] hub 4-0:1.0: 2 ports detected
[    2.839567]   alloc irq_desc for 23 on node -1
[    2.839572]   alloc kstat_irqs on node -1
[    2.839582] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.839606] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.839614] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.839641] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.839730] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[    2.839837] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.839854] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.839861] usb usb5: Product: UHCI Host Controller
[    2.839866] usb usb5: Manufacturer: Linux 2.6.34.7-0.3-desktop uhci_hcd
[    2.839872] usb usb5: SerialNumber: 0000:00:1d.3
[    2.840192] hub 5-0:1.0: USB hub found
[    2.840213] hub 5-0:1.0: 2 ports detected
[    2.840441] Initializing USB Mass Storage driver...
[    2.840570] usbcore: registered new interface driver usb-storage
[    2.840575] USB Mass Storage support registered.
[    2.840624] usbcore: registered new interface driver ums-alauda
[    2.840663] usbcore: registered new interface driver ums-cypress
[    2.840703] usbcore: registered new interface driver ums-datafab
[    2.840752] usbcore: registered new interface driver ums-freecom
[    2.840794] usbcore: registered new interface driver ums-isd200
[    2.840832] usbcore: registered new interface driver ums-jumpshot
[    2.840881] usbcore: registered new interface driver ums-karma
[    2.840921] usbcore: registered new interface driver ums-onetouch
[    2.840960] usbcore: registered new interface driver ums-sddr09
[    2.841023] usbcore: registered new interface driver ums-sddr55
[    2.841074] usbcore: registered new interface driver ums-usbat
[    2.841232] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.844297] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.844312] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.844520] mice: PS/2 mouse device common for all mice
[    2.844902] rtc_cmos 00:06: RTC can wake from S4
[    2.845076] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.845142] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.845194] cpuidle: using governor ladder
[    2.845199] cpuidle: using governor menu
[    2.846234] usbcore: registered new interface driver hiddev
[    2.846293] usbcore: registered new interface driver usbhid
[    2.846298] usbhid: USB HID core driver
[    3.566502] TCP cubic registered
[    3.566698] NET: Registered protocol family 10
[    3.567856] lo: Disabled Privacy Extensions
[    3.568680] lib80211: common routines for IEEE802.11 drivers
[    3.568686] lib80211_crypt: registered algorithm 'NULL'
[    3.568735] Using IPI No-Shortcut mode
[    3.568992] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HTS541060G9SA00_MPBCP0XGJM02XG-part5
[    3.570837] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.573090] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 102C, max UDMA/33
[    3.573699] ata1.00: failed to set max address (err_mask=0x1)
[    3.573707] ata1.00: device aborted resize (114270345 -> 117210240), skipping HPA handling
[    3.573730] ata1.00: ATA-7: Hitachi HTS541060G9SA00, MB3OC60R, max UDMA/100
[    3.573738] ata1.00: 114270345 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    3.579577] ata2.00: configured for UDMA/33
[    3.580101] ata1.00: configured for UDMA/100
[    3.580446] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54106 MB3O PQ: 0 ANSI: 5
[    3.580989] sd 0:0:0:0: [sda] 114270345 512-byte logical blocks: (58.5 GB/54.4 GiB)
[    3.581208] sd 0:0:0:0: [sda] Write Protect is off
[    3.581216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.581304] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.582431]  sda:
[    3.585774] scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 102C PQ: 0 ANSI: 5
[    3.612668]  sda1 sda2 < sda5 sda6 sda7 >
[    3.671032] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.771034] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    3.885455] usb 1-1: New USB device found, idVendor=413c, idProduct=a005
[    3.885462] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.885908] hub 1-1:1.0: USB hub found
[    3.886084] hub 1-1:1.0: 4 ports detected
[    4.209191] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0
[    4.244862] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    4.247652] PM: Resume from disk failed.
[    4.247707] registered taskstats version 1
[    4.248482]   Magic number: 14:625:598
[    4.248685] rtc_cmos 00:06: setting system clock to 2010-10-06 20:33:26 UTC (1286397206)
[    4.249093] Freeing unused kernel memory: 424k freed
[    4.249544] Write protecting the kernel text: 4444k
[    4.249807] Write protecting the kernel read-only data: 2980k
[    4.391305] thermal LNXTHERM:01: registered as thermal_zone0
[    4.391358] ACPI: Thermal Zone [THM] (25 C)
[    4.448855] Marking TSC unstable due to TSC halts in idle
[    4.450109] Switching to clocksource hpet
[    4.480179] udev: starting version 157
[    4.957089] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    5.017287] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    5.251851] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
[    5.251978] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    5.261754] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    5.267908] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    5.268991] ACPI: Lid Switch [LID]
[    5.269182] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    5.287113] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    5.287242] ACPI: Power Button [PBTN]
[    5.287408] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    5.287500] ACPI: Sleep Button [SBTN]
[    5.563343] [drm] Initialized drm 1.1.0 20060810
[    5.683198] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.683210] i915 0000:00:02.0: setting latency timer to 64
[    5.691608] [drm] set up 7M of stolen space
[    6.186635] [drm] initialized overlay support
[    6.840059] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    6.840146] Console: switching to colour dummy device 80x25
[    7.645429] Console: switching to colour frame buffer device 236x71
[    7.991111] fb0: inteldrmfb frame buffer device
[    7.991118] registered panic notifier
[    7.991146] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.124858] PM: Marking nosave pages: 0000000000002000 - 0000000000010000
[    8.124877] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    8.124886] PM: Basic memory bitmaps created
[    8.182397] PM: Basic memory bitmaps freed
[    8.182420] video LNXVIDEO:01: Restoring backlight state
[    8.274168] PM: Starting manual resume from disk
[    8.274176] PM: Resume from partition 8:5
[    8.274190] PM: Checking hibernation image.
[    8.274628] PM: Error -22 checking image file
[    8.274632] PM: Resume from disk failed.
[    8.556064] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   10.874797] preloadtrace: systemtap: 1.1/0.147, base: f8242000, memory: 24data/38text/6ctx/13net/266alloc kb, probes: 34
[   12.929249] udev: starting version 157
[   13.909713] wl: module license 'unspecified' taints kernel.
[   13.909722] Disabling lock debugging due to kernel taint
[   14.598148] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.598163] wl 0000:0c:00.0: setting latency timer to 64
[   14.634340] ACPI: Battery Slot [BAT0] (battery absent)
[   14.670103] intel_rng: FWH not detected
[   14.673675] ACPI: AC Adapter [AC] (on-line)
[   14.815349] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   14.819207] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.833815] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   14.866287] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.866505] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   14.931395] iTCO_vendor_support: vendor-support=0
[   14.963000] lib80211_crypt: registered algorithm 'TKIP'
[   14.978079] ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   14.992676] sdhci: Secure Digital Host Controller Interface driver
[   14.992683] sdhci: Copyright(c) Pierre Ossman
[   15.033375] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[df9fd800-df9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   15.089066] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   15.089085] Uniform CD-ROM driver Revision: 3.20
[   15.090336] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   15.125247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   15.127146] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[   15.128483] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.174760] eth0: Broadcom BCM4311 802.11 Hybrid Wireless Controller 5.60.48.36 
[   15.184206] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19)
[   15.184258]   alloc irq_desc for 18 on node -1
[   15.184263]   alloc kstat_irqs on node -1
[   15.184289] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   15.189094] Registered led device: mmc0::
[   15.194484] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[   15.368353] leds_ss4200: no LED devices found
[   15.450335] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.459119] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[   15.459144] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[   15.459156] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[   15.463659] eth0 renamed to eth1 by udevd [433]
[   15.465520] udev: renamed network interface eth0 to eth1
[   15.483171] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[   15.483238] b44: b44.c:v2.0
[   15.493805] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:42:a1:cc
[   15.773181] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   15.773982]   alloc irq_desc for 27 on node -1
[   15.773989]   alloc kstat_irqs on node -1
[   15.774052] HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X
[   15.774145] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.014621] ALSA hda_codec.c:4385: autoconfig: line_outs=3 (0xe/0x11/0xf/0x0/0x0)
[   16.014648] ALSA hda_codec.c:4389:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.014662] ALSA hda_codec.c:4393:    hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   16.014686] ALSA hda_codec.c:4394:    mono: mono_out=0x0
[   16.014697] ALSA hda_codec.c:4397:    dig-out=0x9/0x0
[   16.014719] ALSA hda_codec.c:4405:    inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
[   16.078257] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.078741] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8

[   16.313391] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[484fc000330d3d41]
[   17.390731] Adding 1548284k swap on /dev/sda5.  Priority:-1 extents:1 across:1548284k 
[   19.859318] device-mapper: uevent: version 1.0.3
[   19.860919] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[   23.351697] loop: module loaded
[   27.755358] EXT4-fs (sda7): mounted filesystem with ordered data mode
[   29.185719] fuse init (API version 7.13)
[   31.905051] type=1505 audit(1286397234.156:2): operation="profile_load" pid=1061 name=/bin/ping
[   32.213807] type=1505 audit(1286397234.464:3): operation="profile_load" pid=1098 name=/sbin/klogd
[   33.130463] type=1505 audit(1286397235.381:4): operation="profile_load" pid=1099 name=/sbin/syslog-ng
[   33.599114] type=1505 audit(1286397235.850:5): operation="profile_load" pid=1161 name=/sbin/syslogd
[   34.420518] type=1505 audit(1286397236.671:6): operation="profile_load" pid=1162 name=/usr/sbin/avahi-daemon
[   34.833810] type=1505 audit(1286397237.084:7): operation="profile_load" pid=1219 name=/usr/sbin/identd
[   35.293107] type=1505 audit(1286397237.544:8): operation="profile_load" pid=1220 name=/usr/sbin/mdnsd
[   35.807342] type=1505 audit(1286397238.058:9): operation="profile_load" pid=1221 name=/usr/sbin/nscd
[   36.469187] type=1505 audit(1286397238.720:10): operation="profile_load" pid=1222 name=/usr/sbin/ntpd
[   36.828612] type=1505 audit(1286397239.079:11): operation="profile_load" pid=1223 name=/usr/sbin/traceroute
[   37.812250] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   38.028986] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.203855] nf_conntrack version 0.5.0 (15821 buckets, 63284 max)
[   38.324031] powernow: This module only works with AMD K7 CPUs
[   43.152762] type=1503 audit(1286397245.403:12): operation="change_hat" info="unconfined" error=-1 pid=1773
[   43.152831] type=1503 audit(1286397245.403:13): operation="change_hat" info="unconfined" error=-1 pid=1773
[   44.251950] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.461138] NET: Registered protocol family 17
[   46.837233] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[   87.165767] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[  121.266266] bootsplash: status on console 0 changed to on
[  217.778910] packagekitd[4476]: segfault at 0 ip (null) sp b63b609c error 14 in packagekitd[8048000+51000]
maulinux:/home/mauriciohg #
    Code:
    maulinux:/home/mauriciohg # dmesg | grep firmware
maulinux:/home/mauriciohg # uname -r
2.6.34.7-0.3-desktop
maulinux:/home/mauriciohg #
    Last edited by MikeTbob; 10-08-2010 at 01:22 AM. Reason: Added code tags
    Reply With Quote Reply With Quote
  4. 10-08-2010 #4
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    Can you open your network tool and create a new connection, the device name is eth1 as far as I can tell, everything appears to be okay.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  5. 10-08-2010 #5
    mauriciohg
    mauriciohg is offline
    Just Joined!
    Join Date
    Oct 2010
    Location
    Aurora, IL
    Posts
    12
    Yes, I can... I'm going through Ifup. In the overview tab, I have 2 options:
    1) BCM4311 802.11b/g WLAN DHCP
    2) BCM4401-B01 100Base-TX DHCP

    If I plug a cable, it does work fine.
    Now, here in the "network settings" the interface is recognized as a wlan but in the system it's not. It's an eth0.
    Also, I've tried to configure the wireless card accordingly to the specs of my AP but nothing happens.
    Might there be a conflict between the eth0 and the wlan1 interfaces? They're both trying to do the same thing and "kill"each other in the process.
    I don't know what else to do.
    Thanx
    Reply With Quote Reply With Quote
  6. 10-09-2010 #6
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    I see one problem.

    Your computer has both network devices that are made by Broadcom. The LAN used the b44 driver module and the ssb driver module. The wireless is trying to use the wl driver module. There is another Broadcom driver named b43, that also would use the ssb driver module, this one currently is not loading. The wl driver will not work as long as the ssb module is loading, but removing it will make the LAN connection stop working.

    I hope this is not too technical.

    The solution? You can remove and blacklist the ssb module, then you should be able to configure the wireless. Or, it appears that the b43 driver does support your wireless. So using that, everything should work OK. I think that you should try the second option, so do this:

    1) Unload the wl module:
    Code:
    sudo modprobe -r wl
    2) Install firmware needed for the b43 driver (you need a working LAN connection):
    Code:
    sudo /usr/sbin/install_bcm43xx_firmware
    3) Load the b43 driver:
    Code:
    sudo modprobe b43
    4) Open YaST and configure the wireless under the Network cards section :
    • Tell it to use NetworkManager instead of traditional ifup.

    • Allow all users to control the device.

    • Use DHCP and DNS to get the IP address.


    5) Save and exit.

    Now try NetworkManager to connect wirelessly. It usually can be found in the taskbar, next to the Date/Time.

    This is only a temporary fix, and will not work again after a reboot. If it works, it can be made permanent by blacklisting the wl module.
    Last edited by waterhead; 10-09-2010 at 12:34 PM.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  7. 10-09-2010 #7
    mauriciohg
    mauriciohg is offline
    Just Joined!
    Join Date
    Oct 2010
    Location
    Aurora, IL
    Posts
    12
    When I write the instruction, it gives me:

    mauriciohg@maulinux:-> sudo modprobe -r wl
    root's password:
    sudo: modprobe: command not found

    I tried it twice and the same response.

    Also, I already installed this one
    sudo /usr/sbin/install_bcm43xx_firmware

    I do have the "cabled" network....

    Thi thing is that when I use ifup instead of NM, the port gets the IP through DHCP; when I change to NM, it won't get an IP.

    Any clues?...
    Thanx!
    Reply With Quote Reply With Quote
  8. 10-09-2010 #8
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    When you use ifup and it gets an IP, is the LAN cable still connected? Have you tried removing the cable and then try the ifup command?
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  9. 10-09-2010 #9
    mauriciohg
    mauriciohg is offline
    Just Joined!
    Join Date
    Oct 2010
    Location
    Aurora, IL
    Posts
    12
    No, the cable isn't connected... Actually it gets the IP from the AP but it won't surf....
    Thanx!
    Reply With Quote Reply With Quote
  10. 10-10-2010 #10
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    Quote Originally Posted by mauriciohg View Post
    When I write the instruction, it gives me:

    mauriciohg@maulinux:-> sudo modprobe -r wl
    root's password:
    sudo: modprobe: command not found

    I tried it twice and the same response.
    You need to give the path:
    Code:
    /sbin/modprobe -r wl
    If you get the same error, then you need to find modprobe on your system:
    Code:
    locate modprobe
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
Page 1 of 3 1 2 3 LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

...