broadcom wlan card

[LeigerReign]

Thanks for the quick reply:

This is what i get with the hwinfo command.

30: PCI 202.0: 0280 Network controller
[Created at pci.273]
Unique ID: LHB6._NJBby6kqo8
Parent ID: bSAa.P9jjq87suAC
SysFS ID: /devices/pci0000:00/0000:00:0a.0/0000:02:02.0
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Hewlett-Packard Company BCM4306 802.11b/g Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x12f4
Revision: 0x03
Memory Range: 0xe8100000-0xe8101fff (rw,non-prefetchable)
IRQ: 10 (1 event)
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (PCI bridge)

I see it says it is not configured but ive tried to go to control center, yast2, network devices, network card. It has a wlan0 but that the one ive manually installed. Its not in the network cards to configure box either. Ill try to reinstall it using that kernel command you gave me but im doubtful. I see that the info my computer gave me doesnt include a driver? Is that okay? I think it would need one. Thanks for all the help so far.

[LeigerReign]

Thanks for the quick reply:

This is what i get with the hwinfo command.

30: PCI 202.0: 0280 Network controller
[Created at pci.273]
Unique ID: LHB6._NJBby6kqo8
Parent ID: bSAa.P9jjq87suAC
SysFS ID: /devices/pci0000:00/0000:00:0a.0/0000:02:02.0
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Hewlett-Packard Company BCM4306 802.11b/g Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x12f4
Revision: 0x03
Memory Range: 0xe8100000-0xe8101fff (rw,non-prefetchable)
IRQ: 10 (1 event)
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (PCI bridge)

I see it says it is not configured but ive tried to go to control center, yast2, network devices, network card. It has a wlan0 but that the one ive manually installed. Its not in the network cards to configure box either. Ill try to reinstall it using that kernel command you gave me but im doubtful. I see that the info my computer gave me doesnt include a driver? Is that okay? I think it would need one. Thanks for all the help so far.

[LeigerReign]

Thanks for the quick reply:

This is what i get with the hwinfo command.

30: PCI 202.0: 0280 Network controller
[Created at pci.273]
Unique ID: LHB6._NJBby6kqo8
Parent ID: bSAa.P9jjq87suAC
SysFS ID: /devices/pci0000:00/0000:00:0a.0/0000:02:02.0
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Hewlett-Packard Company BCM4306 802.11b/g Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x12f4
Revision: 0x03
Memory Range: 0xe8100000-0xe8101fff (rw,non-prefetchable)
IRQ: 10 (1 event)
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (PCI bridge)

I see it says it is not configured but ive tried to go to control center, yast2, network devices, network card. It has a wlan0 but that the one ive manually installed. Its not in the network cards to configure box either. Ill try to reinstall it using that kernel command you gave me but im doubtful. I see that the info my computer gave me doesnt include a driver? Is that okay? I think it would need one. Thanks for all the help so far.

[LeigerReign]

Thanks for the quick reply:

This is what i get with the hwinfo command.

30: PCI 202.0: 0280 Network controller
[Created at pci.273]
Unique ID: LHB6._NJBby6kqo8
Parent ID: bSAa.P9jjq87suAC
SysFS ID: /devices/pci0000:00/0000:00:0a.0/0000:02:02.0
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Hewlett-Packard Company BCM4306 802.11b/g Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x12f4
Revision: 0x03
Memory Range: 0xe8100000-0xe8101fff (rw,non-prefetchable)
IRQ: 10 (1 event)
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (PCI bridge)

I see it says it is not configured but ive tried to go to control center, yast2, network devices, network card. It has a wlan0 but that the one ive manually installed. Its not in the network cards to configure box either. Ill try to reinstall it using that kernel command you gave me but im doubtful. I see that the info my computer gave me doesnt include a driver? Is that okay? I think it would need one. Thanks for all the help so far.

[LeigerReign]

wow....i guess all those error messages were just some cruel joke.........................

[LeigerReign]

wow....i guess all those error messages were just some cruel joke.........................