Help: ADSL USB Modem

[sigmund]

I'm newbie in linux (I'm using SUSE 10.1), after some problems that I solved using some forums I found one that I can't find the answer:
I've finally installed the eciadsl-usermode and the eciadsl-synch.

It runs well, identify the USB modem, synchronize, but then stops with this info:

sent [lcp config id=0x1 <magic 0x2a742d0e>]

If you have a solution or an easyer way to connect please tell me.
Tks for your help, and sorry for my bad english

João

[sdousley]

1st solution (if possible) Use the ethernet on the modem. That way it makes things a LOT easier. If that doesn't work, or you have no ethernet on the modem, what modem is it?

[sigmund]

1st solution (if possible) Use the ethernet on the modem. That way it makes things a LOT easier. If that doesn't work, or you have no ethernet on the modem, what modem is it?

It's a Siemens, Santis(I think). It only have a usb connection.

[peteh]

I've had a similar problem and I'm still researching it. In the meantime, when the activity hangs I open another session of konsole (or whichever terminal emulator you use) and enter "eciadsl-stop" which shuts down the modem and then "eciadsl-start" again and it works the second time.
It's a bit clumsy but it's always worked for me so far and I'm still trying to find a proper solution.

[sigmund]

Thanks Pete, I'll try it...

EDITED:

No... it stills not working

[peteh]

Have you tried the FAQ page on http://eciadsl.flashtux.org/faq.php?

[sigmund]

yes... i tried that already.