Results 1 to 8 of 8
I'm trying to install SuSE 10.1 on an Emachines 2240 that was "donated" to me. I'm not a newbie but this is driving me nuts.
The partitioning and hard disk ...
- 11-27-2006 #1Just Joined!
- Join Date
- Nov 2006
- Posts
- 4
SuSE 10.1 Install on Emachine 2240 SLOOOOOWWWW
I'm trying to install SuSE 10.1 on an Emachines 2240 that was "donated" to me. I'm not a newbie but this is driving me nuts.
The partitioning and hard disk prep are taking FOREVER... I can see the CD light flashing even though there should be no activity on it during this phase. It looks like some process is looping and eating the cpu cycles. I tried all the Installation options on the Install menu with no difference.
Any Ideas out there (besides avoiding emachines)???
Thanks...
- 11-27-2006 #2Just Joined!
- Join Date
- Oct 2006
- Location
- Parents basement
- Posts
- 62
What's the speeds of the cd-rom, harddrive and CPU?
- 11-27-2006 #3Just Joined!
- Join Date
- Nov 2006
- Posts
- 4
Ain't the CD
The mystery deepens.
It ain't the CD. That's a 56x'er.
The process was at the point of manually setting the partitions on the HD so there should have been no CD activity anyway.
BUT... I grabbed a copy of my old SuSE 8.2 CD's and the install runs just fine.
Beats me...
- 11-27-2006 #4Just Joined!
- Join Date
- Oct 2006
- Posts
- 36
1. Is the media that you burnt ok? Did you check it?
2. How much ram does this system have?
3. Maybe try swapping CD rom drives. Also how is the CD drive hooked up?
On the same IDE cable with another CD rom drive? If so that could be causing problems.
4. Is the hard drive ok? I have had drives that was going bad before running really slow.
- 11-28-2006 #5Just Joined!
- Join Date
- Nov 2006
- Posts
- 4
SuSE 8.2 pretty much loads. Got other problems not related to speed. So...
1. media is fine. checked it.
2.Got enough ram. Don't need much to install anyway. Doesn't explain the cd activity, in any event.
3. CD rom is fine under XP and installs 8.2.
4. HD is fine.
I think it has to do with emachine architecture. Oh, well. Keeping me off the streets at night.
I really hate these freakin' things...
- 11-28-2006 #6Linux Guru
- Join Date
- Nov 2004
- Posts
- 6,110
Did you check the disks with md5sum or just by glancing at the contents?
- 11-28-2006 #7Just Joined!
- Join Date
- Nov 2006
- Posts
- 4
media was verified by checksums. it ain't the media...
- 11-28-2006 #8Just Joined!
- Join Date
- Oct 2006
- Posts
- 36
SUSE Linux 10.1
Hardware Requirements
SUSE Linux supports most PC hardware components. The following requirements should be met to ensure smooth operation of SUSE Linux 10.1:
* Processor: Intel: Pentium 1-4 or Xeon; AMD: Duron, Athlon, Athlon XP, Athlon MP, Athlon 64, Sempron or Opteron
* Main memory: At least 256 MB; 512 MB recommended
* Hard disk: At least 500 MB for minimal system; 3 GB recommended for standard system
* Sound and graphics cards: Supports most modern sound and graphics cards


Reply With Quote