xorg.conf issues

[corrupt]

Hello everyone. I installed Suse 10.1 distr. Everything is fine except that i cant change vert sync on my Benq fp91v monitor(I have 60Hz, but i want 70Hz). I tried the procedure described on forum, but ended up with xorg.conf looking like this:

Section "Monitor"
DisplaySize 380 300
HorizSync 30-83
Identifier "Monitor[0]"
ModelName "BENQ FP91V"
Option "DPMS"
VendorName "BNQ"
VertRefresh 60-70
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
# 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync
# 1280x1024 @ 70.00 Hz (GTF) hsync: 74.62 kHz; pclk: 128.94 MHz
Modeline "1280x1024_70.00" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -HSync +Vsync
# 800x600 @ 70.00 Hz (GTF) hsync: 43.75 kHz; pclk: 45.50 MHz
Modeline "800x600_70.00" 45.50 800 840 920 1040 600 601 604 625 -HSync +Vsync

EndSection

Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1024x768_70.00" "1280x1024_70.00" "800x600_70.00"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768_70.00" "1280x1024_70.00" "800x600_70.00"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768_70.00" "1280x1024_70.00" "800x600_70.00"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768_70.00" "1280x1024_70.00" "800x600_70.00"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

But when starting X. System seems to think that I have 70 Hz, but monitor settings show only 60. And sometimes error dialog appears, but it doesnt override my version of xorg.conf with default settings. Any suggestions?

[devils casper]

Section "Monitor"
DisplaySize 380 300
HorizSync 30-83
Identifier "Monitor[0]"
ModelName "BENQ FP91V"
Option "DPMS"
VendorName "BNQ"
VertRefresh 60-70
UseModes "Modes[0]"
EndSection

HorizSync rate is too high. it should be around 30-60 and set VertRefresh to 50-70.
check your Monitor Manual for supported rates. wrong rates can damage your Monitor.





casper

[corrupt]

Thanks for answer, casper. But the problem was simpler than i thought. I just installed new ati driver for my video card. And looks like driver added this lines in my xorg.conf file

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

But in xorg.conf there are no such sections as aticonfig-Screen[0]. But something else was modified for sure)

[devils casper]

i am glad you sorted out problem. you didn't write about ATI Card in your first post.





casper