Problem with USB wireless card (DLink)

[Pilkers]

Hi.

I have suse 10.1 and I have installed windows driver for my DWL G122 USB Wireless card. Unfortunately it doesn't work. Every think look fine but i do not see any wireless
card. Some sugestions?

I have also tried to install rt2570 driver. Same situation.

here is my:

lspci:
-----------------------------------------------------------------------------------
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
05:00.0 VGA compatible controller: nVidia Corporation Unknown device 00c3 (rev a2)
-----------------------------------------------------------------------------------


iwconfig
-----------------------------------------------------------------------------------
lo no wireless extensions.

eth0 no wireless extensions.

sit0 no wireless extensions.
-----------------------------------------------------------------------------------

and last lines from dmesg:
-----------------------------------------------------------------------------------
usb 1-3: USB disconnect, address 2
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: new device found, idVendor=07d1, idProduct=3c03
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: 802.11 bg WLAN
usb 1-3: Manufacturer: Ralink
usb 1-3: configuration #1 chosen from 1 choice
-----------------------------------------------------------------------------------

[AlexK]

are you running a 64-bit version of Linux? If you are not sure, post the results of this command:

uname -a