Time always resets after reboot in OpenSUSE 12.1/KDE 4.6

Folks: I've been trying to fix my time settings on OpenSUSE 12, but nothing works.

Every time I reboot, it's always off by 4 - 5 hours. I've set the timezone to New York (EST), and the BIOS is right. But still it will not keep the right time. I've used the command line to set the date, time and timezone (Sun Mar 11 18:12:06 EST 2012) So it's set right, but instead of 18h, it's nearly 23h as I write this.

In the settings/date & Time - system settings, I tell it to set date and time automatically, using the north-America.pool.ntp.org server.

But every time I reboot, it's the same problem. The time is at least 4 hours to 5 hours wrong. The little clock widget on KDE 4.6 also shows the same time as the command line time.

Oddly enough even Windows on the same machine has had problems. I have a little program that resets the time via an internet connection under Windows, but Linux will not work.

Anyone know how to fix this for good?

There should be some information as to what's not working in your log files. First check if it's logging statistics:

Code:

---

grep log /etc/ntp.conf

---

If it's logging (no pound symbol in front), check the log file it gives you and find out what the errors are, and bring them back here!

If it's not logging, edit the file

Code:

---

sudo nano /etc/ntp.conf

---

and remove the pound symbol so you can have some logging and know what's going wrong with ntp.

I forgot, you might also get lucky and find something in /var/log/messages or /var/log/daemon.log concerning NTP.

Quote:

---

Originally Posted by charleseddy

There should be some information as to what's not working in your log files. First check if it's logging statistics:

Code:

---

grep log /etc/ntp.conf

---

If it's logging (no pound symbol in front), check the log file it gives you and find out what the errors are, and bring them back here!

If it's not logging, edit the file

Code:

---

sudo nano /etc/ntp.conf

---

and remove the pound symbol so you can have some logging and know what's going wrong with ntp.

---

Code:

---

2 Aug 20:52:07 ntpd[5971]: ntpd exiting on signal 15
 2 Aug 17:53:00 ntpd[1918]: bind(21) AF_INET6 fe80::22cf:30ff:fef0:e62c%2#123 flags 0x11 failed: Cannot assign requested address
 2 Aug 17:53:00 ntpd[1918]: unable to create socket on eth0 (5) for fe80::22cf:30ff:fef0:e62c#123
 2 Aug 17:53:00 ntpd[1918]: failed to init interface for address fe80::22cf:30ff:fef0:e62c
 2 Aug 17:53:04 ntpd[1918]: Listen normally on 6 eth0 192.168.1.5 UDP 123
 2 Aug 17:53:04 ntpd[1918]: Listen normally on 7 eth0 fe80::22cf:30ff:fef0:e62c UDP 123
 2 Aug 17:53:04 ntpd[1918]: peers refreshed
 2 Aug 17:53:04 ntpd[1918]: new interface(s) found: waking up resolver
 2 Aug 18:38:30 ntpd[1918]: ntpd exiting on signal 15
 3 Aug 20:54:26 ntpd[8214]: ntpd exiting on signal 15

---

Quote:

---

Originally Posted by charleseddy

I forgot, you might also get lucky and find something in /var/log/messages or /var/log/daemon.log concerning NTP.

---

not found