| |
05-21-2008
|
#1 (permalink)
| | Just Joined!
Join Date: May 2008
Posts: 12
| ASUS Eee - Permissions. Recently i bought my ASUS Eee PC and it is my first Linux experience, and im loving it.
I'm looking to install a game onto the PC, although it wont quite fit on the computers tiny internal 4gb Flash Memory, so i would like to install it to an external 8gb USB flash drive.
Basically, i can install to the /home/user/ perfectly (but theres not enough space). However when i select to install to the USB it gave me the following errors;
I've tried many things so far, including changing permissions and ownership of the USB drive.
sudo chmod +rwxrwxrwx /home/user/cj/ (cj is the USB's name)
Then i tried;
sudo chown -R root:user /home/user/cj/
This is meant to change the owner of the USB (and all subfolders) to me, however it tells me i dont have permission to change it.
Any help would be appreciated.
I've already had some minor experiance is permissions as a Virtual Private Network Client (VPN) was in /etc/vpnc/ which i had no permission to, and i needed to put a file into that folder, and i found the following two ways around it;
sudo chmod +rwxrwxrwx /etc/vpnc/
and
sudo mv monash.conf /etc/vpnc/monash.conf
Thanks in advance. |
| Looking for Linux Hosting? Click Here
|
05-21-2008
|
#2 (permalink)
| | Super Moderator
Join Date: Jun 2006 Location: Chandigarh, India
Posts: 20,697
| Execute sudo fdisk -l command and notedown device name ( /dev/sda1 or /dev/sdb1) and mount point ( /media/USB or something like that).
Remount it using mount command.
Let say, /dev/sdb is device name assigned to USB Stick.
Execute this Code: umount /dev/sdb1
mount -t vfat /dev/sdb1 /media/USB -o defaults,umask=0
__________________ It takes a lot of time to be a genius, you have to sit around so much doing nothing, really doing nothing. - Gertrude Stein New Users: Read This First |
| |
05-21-2008
|
#3 (permalink)
| | Just Joined!
Join Date: May 2008
Posts: 12
| Also, just to add two things;
1 - i can create, edit and delete files on the USB in the file manager, the problem is only when trying to install to it.
2 - The USB is a 4gb USB2 by DSE
Below is the my file manager and output of sudo fdisk -l;
In regards to that picture above - I have full permissions and access to the ipod, as it is owned and grouped to user. Quote:
/home/user/cj> sudo fdisk -l
Disk /dev/sda: 4001 MB, 4001292288 bytes
255 heads, 63 sectors/track, 486 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 300 2409718+ 83 Linux
/dev/sda2 301 484 1477980 83 Linux
/dev/sda3 485 485 8032+ c W95 FAT32 (LBA)
/dev/sda4 486 486 8032+ ef EFI (FAT-12/16/32)
Disk /dev/sdc: 4043 MB, 4043309056 bytes
125 heads, 62 sectors/track, 1018 cylinders
Units = cylinders of 7750 * 512 = 3968000 bytes
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdc1 ? 100405 247697 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(100404, 79, 11)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(247696, 24, 51)
Partition 1 does not end on cylinder boundary.
/dev/sdc2 ? 21767 271577 968014120 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(21766, 48, 47)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(271576, 60, 42)
Partition 2 does not end on cylinder boundary.
/dev/sdc3 ? 241276 491086 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(241275, 3, 30)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(491085, 14, 39)
Partition 3 does not end on cylinder boundary.
/dev/sdc4 ? 372346 372354 27749+ d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(372345, 119, 25)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(372353, 14, 33)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
Note: sector size is 2048 (not 512)
Disk /dev/sdd: 4060 MB, 4060086272 bytes
255 heads, 63 sectors/track, 123 cylinders
Units = cylinders of 16065 * 2048 = 32901120 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 3 96264 0 Empty
/dev/sdd2 4 123 3855600 b W95 FAT32 |
I tried this; Quote:
/home/user> sudo umount /dev/sdc/
/home/user> sudo mount -t vfat /dev/sdc /media/USB2FlashStorage/data -o defaults,umask=0
| But i still get this error when installing;  |
| |
05-22-2008
|
#4 (permalink)
| | Just Joined!
Join Date: May 2008
Posts: 1
| I suspect that problem is probably nothing to do with permissions on the USB drive.
Are you installing this as root ar as user.
If you are installing multi-user mode you will probably have to do it as root. If single user mode you might be able to do it as user. |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |