| | 
07-28-2007
|
#1 (permalink)
| | Just Joined!
Join Date: Jul 2007 Location: USA
Posts: 61
| No Sound
This seems to be a common problem. I have no sound when I use Linux. When I go under system/preferences/sound, under the various options, it gives me choices between nVidia CK804, nVidia CK804 - IEC958, ALSA, ESD, and OSS. I have no idea how to configure the sound card or install proper drivers. Any help is appreciated. | 
|
 | |
07-28-2007
|
#2 (permalink)
| | Linux User
Join Date: May 2007 Location: Pune, India
Posts: 397
|
Hey,
Does your sound card is detected ? does drivers are installed for it?
What is the output of your following commands
#lspci
#dmesg
#alsa$ sudo alsaconf
# cat /proc/asound/modules
# sudo gedit /etc/modprobe.d/alsa-base
# autoloader aliases | |
| | |
07-28-2007
|
#3 (permalink)
| | Super Moderator
Join Date: Jun 2006 Location: Chandigarh, India
Posts: 21,050
| alsaconf is not available in Ubuntu.
Execute this
__________________ It takes a lot of time to be a genius, you have to sit around so much doing nothing, really doing nothing. - Gertrude Stein
New Users: Read This First
| |
| | |
07-28-2007
|
#4 (permalink)
| | Just Joined!
Join Date: Jul 2007 Location: USA
Posts: 61
| Quote:
Originally Posted by infoshirish  Hey,
Does your sound card is detected ? does drivers are installed for it?
What is the output of your following commands
#lspci
#dmesg
#alsa$ sudo alsaconf
#cat /proc/asound/modules
#sudo gedit /etc/modprobe.d/alsa-base
#autoloader aliases | lspci: Code: 00:00.0 Host bridge: nVidia Corporation Unknown device 0071 (rev a3)
00:00.1 RAM memory: nVidia Corporation Unknown device 007f (rev a1)
00:00.2 RAM memory: nVidia Corporation Unknown device 0075 (rev a1)
00:00.3 RAM memory: nVidia Corporation Unknown device 006f (rev a1)
00:00.4 RAM memory: nVidia Corporation Unknown device 00b4 (rev a1)
00:01.0 RAM memory: nVidia Corporation Unknown device 0076 (rev a1)
00:01.1 RAM memory: nVidia Corporation Unknown device 0078 (rev a1)
00:01.2 RAM memory: nVidia Corporation Unknown device 0079 (rev a1)
00:01.3 RAM memory: nVidia Corporation Unknown device 007a (rev a1)
00:01.4 RAM memory: nVidia Corporation Unknown device 007b (rev a1)
00:01.5 RAM memory: nVidia Corporation Unknown device 007c (rev a1)
00:01.6 RAM memory: nVidia Corporation Unknown device 007d (rev a1)
00:02.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:04.0 PCI bridge: nVidia Corporation Unknown device 007e (rev a2)
00:09.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
00:0a.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a4)
00:0a.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:0b.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4)
00:0d.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:0f.0 IDE interface: nVidia Corporation CK804 IDE (rev f3)
00:10.0 RAID bus controller: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:11.0 RAID bus controller: nVidia Corporation CK804 Serial ATA Controller (rev f4)
00:12.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:13.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:17.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
01:00.0 VGA compatible controller: nVidia Corporation NV41.1 [GeForce 6800] (rev a2)
03:03.0 Multimedia audio controller: Creative Labs SB X-Fi
03:04.0 Multimedia video controller: NEC Corporation Dual Tuner/MPEG Encoder (rev 0b)
03:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
dmesg: Code: A whole lotta crap - i'm not sure if it got cut off cuz its too big or not.
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Detected 2993.225 MHz processor.
[ 15.919419] Built 1 zonelists. Total pages: 519665
[ 15.919423] Kernel command line: root=UUID=032539cc-76fd-4210-a736-4e948f06c2df ro quiet splash
[ 15.919577] mapped APIC to ffffd000 (fee00000)
[ 15.919580] mapped IOAPIC to ffffc000 (fec00000)
[ 15.919583] Enabling fast FPU save and restore... done.
[ 15.919586] Enabling unmasked SIMD FPU exception support... done.
[ 15.919593] Initializing CPU#0
[ 15.919659] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 15.921264] Console: colour VGA+ 80x25
[ 15.921525] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.921836] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.996117] Memory: 2066028k/2095024k available (1992k kernel code, 27728k reserved, 900k data, 328k init, 1177520k highmem)
[ 15.996126] virtual kernel memory layout:
[ 15.996127] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.996128] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.996130] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.996131] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.996132] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 15.996133] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 15.996134] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 15.996137] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.075608] Calibrating delay using timer specific routine.. 5990.78 BogoMIPS (lpj=11981577)
[ 16.075648] Security Framework v1.0.0 initialized
[ 16.075654] SELinux: Disabled at boot.
[ 16.075669] Mount-cache hash table entries: 512
[ 16.075794] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
[ 16.075802] monitor/mwait feature present.
[ 16.075804] using mwait in idle threads.
[ 16.075809] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 16.075812] CPU: L2 cache: 1024K
[ 16.075814] CPU: Physical Processor ID: 0
[ 16.075816] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000001
[ 16.075826] Compat vDSO mapped to ffffe000.
[ 16.075829] Remapping vsyscall page to ffffe000
[ 16.075844] Checking 'hlt' instruction... OK.
[ 16.091688] SMP alternatives: switching to UP code
[ 16.092034] Early unpacking initramfs... done
[ 16.364755] ACPI: Core revision 20060707
[ 16.368134] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 16.407450] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07
[ 16.407469] SMP alternatives: switching to SMP code
[ 16.407566] Booting processor 1/1 eip 3000
[ 16.417866] Initializing CPU#1
[ 16.495457] Calibrating delay using timer specific routine.. 5986.42 BogoMIPS (lpj=11972850)
[ 16.495465] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
[ 16.495471] monitor/mwait feature present.
[ 16.495477] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 16.495479] CPU: L2 cache: 1024K
[ 16.495481] CPU: Physical Processor ID: 0
[ 16.495482] CPU: Processor Core ID: 1
[ 16.495484] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000001
[ 16.495778] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07
[ 16.495813] Total of 2 processors activated (11977.21 BogoMIPS).
[ 16.495949] ENABLING IO-APIC IRQs
[ 16.496127] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 16.643414] checking TSC synchronization across 2 CPUs: passed.
[ 0.004007] Brought up 2 CPUs
[ 0.077615] migration_cost=826
[ 0.077871] Booting paravirtualized kernel on bare hardware
[ 0.077960] Time: 15:07:14 Date: 06/28/107
[ 0.077990] NET: Registered protocol family 16
[ 0.078076] EISA bus registered
[ 0.078081] ACPI: bus type pci registered
[ 0.083977] PCI: PCI BIOS revision 2.10 entry at 0xfbdcc, last bus=4
[ 0.083980] PCI: Using configuration type 1
[ 0.083982] Setting up standard PCI resources
[ 0.103204] ACPI: Interpreter enabled
[ 0.103208] ACPI: Using IOAPIC for interrupt routing
[ 0.106202] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.106211] PCI: Probing PCI hardware (bus 00)
[ 0.106230] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.111282] Boot video device is 0000:01:00.0
[ 0.111662] PCI: Transparent bridge - 0000:00:12.0
[ 0.111810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.998644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 1.004127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 1.009596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 1.015275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 1.043646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.044359] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.045045] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.045735] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.046423] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.047111] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.047803] ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.048543] ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.049288] ACPI: PCI Interrupt Link [LNKL] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.049978] ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.050666] ACPI: PCI Interrupt Link [LNKN] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.051380] ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.052098] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.053155] ACPI: PCI Interrupt Link [APCA] (IRQs 16) *0, disabled.
[ 1.054153] ACPI: PCI Interrupt Link [APCB] (IRQs 17) *0, disabled.
[ 1.055151] ACPI: PCI Interrupt Link [APCC] (IRQs 18) *0, disabled.
[ 1.056149] ACPI: PCI Interrupt Link [APCD] (IRQs 19) *0, disabled.
[ 1.057106] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 1.058061] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 1.059019] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 1.060033] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 1.061044] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 1.061997] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 1.062951] ACPI: PCI Interrupt Link [APCN] (IRQs 20 21 22 23) *0, disabled.
[ 1.063912] ACPI: PCI Interrupt Link [APCO] (IRQs 20 21 22 23) *0, disabled.
[ 1.064868] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 1.065155] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.065164] pnp: PnP ACPI init
[ 1.100040] pnp: PnP ACPI: found 10 devices
[ 1.100045] PnPBIOS: Disabled by ACPI PNP
[ 1.100094] PCI: Using ACPI for IRQ routing
[ 1.100098] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 1.120670] NET: Registered protocol family 8
[ 1.120672] NET: Registered protocol family 20
[ 1.131314] pnp: 00:01: ioport range 0x800-0x87f has been reserved
[ 1.131318] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 1.131320] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 1.131688] PCI: Bridge: 0000:00:02.0
[ 1.131690] IO window: disabled.
[ 1.131695] MEM window: dd000000-dfefffff
[ 1.131700] PREFETCH window: c0000000-cfffffff
[ 1.131704] PCI: Bridge: 0000:00:04.0
[ 1.131707] IO window: disabled.
[ 1.131711] MEM window: disabled.
[ 1.131714] PREFETCH window: disabled.
[ 1.131720] PCI: Bridge: 0000:00:12.0
[ 1.131724] IO window: d000-dfff
[ 1.131729] MEM window: d8000000-dcffffff
[ 1.131732] PREFETCH window: disabled.
[ 1.131738] PCI: Bridge: 0000:00:17.0
[ 1.131740] IO window: disabled.
[ 1.131745] MEM window: disabled.
[ 1.131748] PREFETCH window: disabled.
[ 1.131764] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.131776] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.131784] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 1.131795] PCI: Setting latency timer of device 0000:00:17.0 to 64
[ 1.131828] NET: Registered protocol family 2
[ 1.179544] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.179673] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.180249] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.180494] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.180497] TCP reno registered
[ 1.191627] checking if image is initramfs... it is
[ 1.726385] Freeing initrd memory: 6787k freed
[ 1.726522] Simple Boot Flag at 0x7a set to 0x1
[ 1.726854] audit: initializing netlink socket (disabled)
[ 1.726867] audit(1185635235.532:1): initialized
[ 1.726991] highmem bounce pool size: 64 pages
[ 1.727091] VFS: Disk quotas dquot_6.5.1
[ 1.727109] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.727153] io scheduler noop registered
[ 1.727157] io scheduler anticipatory registered
[ 1.727159] io scheduler deadline registered
[ 1.727173] io scheduler cfq registered (default)
[ 1.759262] PCI: Found disabled HT MSI Mapping on 0000:00:17.0
[ 1.759269] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0.
[ 1.759431] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.759467] assign_interrupt_mode Found MSI capability
[ 1.759470] Allocate Port Service[0000:00:02.0:pcie00]
[ 1.759560] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.759595] assign_interrupt_mode Found MSI capability
[ 1.759598] Allocate Port Service[0000:00:04.0:pcie00]
[ 1.759696] PCI: Setting latency timer of device 0000:00:17.0 to 64
[ 1.759744] assign_interrupt_mode Found MSI capability
[ 1.759746] Allocate Port Service[0000:00:17.0:pcie00]
[ 1.759903] isapnp: Scanning for PnP cards...
[ 2.111461] isapnp: No Plug & Play device found
[ 2.136996] Real Time Clock Driver v1.12ac
[ 2.137046] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.137171] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.137805] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.137989] mice: PS/2 mouse device common for all mice
[ 2.138601] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 2.138824] input: Macintosh mouse button emulation as /class/input/input0
[ 2.138863] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 2.138867] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.139178] PNP: No PS/2 controller found. Probing ports directly.
[ 2.141881] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.141886] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.142013] EISA: Probing bus 0 at eisa.0
[ 2.142030] Cannot allocate resource for EISA slot 4
[ 2.142032] Cannot allocate resource for EISA slot 5
[ 2.142043] EISA: Detected 0 cards.
[ 2.172113] TCP cubic registered
[ 2.172123] NET: Registered protocol family 1
[ 2.172146] Starting balanced_irq
[ 2.172152] Using IPI No-Shortcut mode
[ 2.172255] ACPI: (supports S0 S1 S3 S4 S5)
[ 2.172304] Magic number: 15:764:134
[ 2.172545] Freeing unused kernel memory: 328k freed
[ 2.175212] Time: tsc clocksource has been installed.
[ 3.385431] Capability LSM initialized
[ 3.426071] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 3.426080] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 3.878838] SCSI subsystem initialized
[ 3.941283] libata version 2.20 loaded.
[ 3.941379] usbcore: registered new interface driver usbfs
[ 3.941408] usbcore: registered new interface driver hub
[ 3.941433] usbcore: registered new device driver usb
[ 3.943536] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 3.943543] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
[ 3.943555] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 3.943558] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 3.943664] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 3.943690] ehci_hcd 0000:00:0b.1: debug port 1
[ 3.943695] PCI: cache line size of 128 is not supported by device 0000:00:0b.1
[ 3.943704] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xdfffaf00
[ 3.943710] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.943799] usb usb1: configuration #1 chosen from 1 choice
[ 3.943828] hub 1-0:1.0: USB hub found
[ 3.943834] hub 1-0:1.0: 10 ports detected
[ 3.947415] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.976522] Floppy drive(s): fd0 is 1.44M
[ 3.980486] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 3.991605] ieee1394: Initialized config rom entry `ip1394'
[ 3.996419] FDC 0 is a post-1991 82077
[ 4.052272] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 4.052280] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[ 4.052292] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 4.052296] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 4.052326] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 4.052341] ohci_hcd 0000:00:0b.0: irq 17, io mem 0xdfffb000
[ 4.112636] usb usb2: configuration #1 chosen from 1 choice
[ 4.112772] hub 2-0:1.0: USB hub found
[ 4.112781] hub 2-0:1.0: 10 ports detected
[ 4.219708] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 4.219716] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [APCM] -> GSI 21 (level, low) -> IRQ 18
[ 4.219723] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 4.219731] forcedeth: using HIGHDMA
[ 4.742190] eth0: forcedeth.c: subsystem: 01028:01c3 bound to 0000:00:13.0
[ 4.743958] NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
[ 4.743978] NFORCE-CK804: chipset revision 243
[ 4.743980] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 4.743988] NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
[ 4.743997] ide0: BM-DMA at 0xe4d0-0xe4d7, BIOS settings: hda:DMA, hdb:DMA
[ 4.744007] Probing IDE interface ide0...
[ 5.029826] usb 1-9: new high speed USB device using ehci_hcd and address 6
[ 5.145973] hda: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
[ 5.239252] usb 1-9: configuration #1 chosen from 1 choice
[ 5.545602] usb 2-4: new low speed USB device using ohci_hcd and address 2
[ 5.593680] hdb: PHILIPS DVD+/-RW DVD8701, ATAPI CD/DVD-ROM drive
[ 5.594378] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.595329] sata_nv 0000:00:10.0: version 3.3
[ 5.596524] ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
[ 5.596530] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APCK] -> GSI 20 (level, low) -> IRQ 19
[ 5.596541] sata_nv 0000:00:10.0: Using ADMA mode
[ 5.596554] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 5.596622] ata1: SATA max UDMA/133 cmd 0xf884a480 ctl 0xf884a4a0 bmdma 0x0001fea0 irq 19
[ 5.596661] ata2: SATA max UDMA/133 cmd 0xf884a580 ctl 0xf884a5a0 bmdma 0x0001fea8 irq 19
[ 5.596670] scsi0 : sata_nv
[ 5.751619] usb 2-4: configuration #1 chosen from 1 choice
[ 6.061382] usb 2-5: new full speed USB device using ohci_hcd and address 3
[ 6.065401] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.074454] ata1.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250
[ 6.074460] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
[ 6.074463] ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 6.086460] ata1.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250
[ 6.086464] ata1.00: configured for UDMA/133
[ 6.086472] scsi1 : sata_nv
[ 6.268401] usb 2-5: configuration #1 chosen from 1 choice
[ 6.401242] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.401347] scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 6.401355] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 6.412245] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
[ 6.412249] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 16
[ 6.412259] sata_nv 0000:00:11.0: Using ADMA mode
[ 6.412275] PCI: Setting latency timer of device 0000:00:11.0 to 64
[ 6.412321] ata3: SATA max UDMA/133 cmd 0xf8922480 ctl 0xf89224a0 bmdma 0x0001feb0 irq 16
[ 6.412360] ata4: SATA max UDMA/133 cmd 0xf8922580 ctl 0xf89225a0 bmdma 0x0001feb8 irq 16
[ 6.412368] scsi2 : sata_nv
[ 6.577156] usb 2-6: new full speed USB device using ohci_hcd and address 4
[ 6.725093] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.725104] scsi3 : sata_nv
[ 6.784191] usb 2-6: configuration #1 chosen from 1 choice
[ 7.036963] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.048392] ACPI: PCI Interrupt Link [APCC] enabled at IRQ 18
[ 7.048399] ACPI: PCI Interrupt 0000:03:0a.0[A] -> Link [APCC] -> GSI 18 (level, low) -> IRQ 20
[ 7.098161] usb 2-8: new full speed USB device using ohci_hcd and address 5
[ 7.098239] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[dcdf9800-dcdf9fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.100985] SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
[ 7.101000] sda: Write Protect is off
[ 7.101003] sda: Mode Sense: 00 3a 00 00
[ 7.101023] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.101079] SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
[ 7.101090] sda: Write Protect is off
[ 7.101093] sda: Mode Sense: 00 3a 00 00
[ 7.101112] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.101115] sda:<6>hda: ATAPI 48X DVD-ROM drive, 254kB Cache, UDMA(33)
[ 7.127430] Uniform CD-ROM driver Revision: 3.20
[ 7.139586] sda1 sda2 sda3
[ 7.139684] sd 0:0:0:0: Attached scsi disk sda
[ 12.135662] hdb: status timeout: status=0xd0 { Busy }
[ 12.135667] ide: failed opcode was: unknown
[ 12.135783] hdb: ATAPI CD-ROM drive, 0kB Cache, UDMA(33)
[ 12.135852] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.290931] usb 2-8: configuration #1 chosen from 1 choice
[ 12.296881] hub 2-8:1.0: USB hub found
[ 12.306695] hub 2-8:1.0: 3 ports detected
[ 12.422750] ieee1394: Host added: ID:BUS[0-00:1023] GUID[80140000b89f5922]
[ 17.137879] hdb: status timeout: status=0xd0 { Busy }
[ 17.137883] ide: failed opcode was: unknown
[ 17.137886] hdb: drive not ready for command
[ 22.140096] hdb: status timeout: status=0xd0 { Busy }
[ 22.140099] ide: failed opcode was: unknown
[ 22.140102] hdb: drive not ready for command
[ 27.142314] hdb: status timeout: status=0xd0 { Busy }
[ 27.142317] ide: failed opcode was: unknown
[ 27.142320] hdb: drive not ready for command
[ 27.143411] kjournald starting. Commit interval 5 seconds
[ 27.143421] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.217682] usb 2-8.1: new full speed USB device using ohci_hcd and address 6
[ 27.332713] usb 2-8.1: configuration #1 chosen from 1 choice
[ 27.351638] usbcore: registered new interface driver libusual
[ 27.351786] usbcore: registered new interface driver hiddev
[ 27.412686] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[ 27.412709] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4
[ 27.416706] input: Dell Dell USB Keyboard as /class/input/input2
[ 27.416717] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0b.0-8.1
[ 27.427637] input: Dell Dell USB Keyboard as /class/input/input3
[ 27.427647] input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:0b.0-8.1
[ 27.427658] usbcore: registered new interface driver usbhid
[ 27.427661] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 32.144533] hdb: status timeout: status=0xd0 { Busy }
[ 32.144536] ide: failed opcode was: unknown
[ 32.144539] hdb: drive not ready for command
[ 37.146750] hdb: status timeout: status=0xd0 { Busy }
[ 37.146753] ide: failed opcode was: unknown
[ 37.146756] hdb: drive not ready for command
[ 42.148968] hdb: status timeout: status=0xd0 { Busy }
[ 42.148971] ide: failed opcode was: unknown
[ 42.148974] hdb: drive not ready for command
[ 47.275142] hdb: status timeout: status=0xd0 { Busy }
[ 47.275146] ide: failed opcode was: unknown
[ 47.275149] hdb: drive not ready for command
[ 47.275289] Initializing USB Mass Storage driver...
[ 47.359731] scsi4 : SCSI emulation for USB Mass Storage devices
[ 47.359784] usb-storage: device found at 6
[ 47.359786] usb-storage: waiting for device to settle before scanning
[ 47.359805] usbcore: registered new interface driver usb-storage
[ 47.359808] USB Mass Storage support registered.
[ 52.362893] usb-storage: device scan complete
[ 52.367516] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0
[ 52.371386] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
[ 52.375759] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
[ 52.379632] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
[ 52.384403] sd 4:0:0:0: Attached scsi removable disk sdb
[ 52.384441] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 52.390392] sd 4:0:0:1: Attached scsi removable disk sdc
[ 52.390427] sd 4:0:0:1: Attached scsi generic sg2 type 0
[ 52.395765] sd 4:0:0:2: Attached scsi removable disk sdd
[ 52.395797] sd 4:0:0:2: Attached scsi generic sg3 type 0
[ 52.447374] sd 4:0:0:3: Attached scsi removable disk sde
[ 52.447410] sd 4:0:0:3: Attached scsi generic sg4 type 0
[ 59.838666] hdb: status timeout: status=0xd0 { Busy }
[ 59.838670] ide: failed opcode was: unknown
[ 59.838674] hdb: drive not ready for command
[ 64.852881] hdb: status timeout: status=0xd0 { Busy }
[ 64.852885] ide: failed opcode was: unknown
[ 64.852889] hdb: drive not ready for command
[ 69.871092] hdb: status timeout: status=0xd0 { Busy }
[ 69.871097] ide: failed opcode was: unknown
[ 69.871100] hdb: drive not ready for command
[ 71.187868] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 71.189492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 71.380819] Linux agpgart interface v0.102 (c) Dave Jones
[ 71.389992] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 71.390033] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 71.403568] NET: Registered protocol family 17
[ 71.420568] nvidia: module license 'NVIDIA' taints kernel.
[ 71.672807] usbcore: registered new interface driver xpad
[ 71.672812] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 71.673554] input: PC Speaker as /class/input/input4
[ 71.679582] ACPI: PCI Interrupt Link [APCA] enabled at IRQ 16
[ 71.679590] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APCA] -> GSI 16 (level, low) -> IRQ 21
[ 71.679602] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 71.679766] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 71.734347] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1084
[ 71.734364] usbcore: registered new interface driver usblp
[ 71.734368] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 71.911191] ACPI: PCI Interrupt Link [APCN] enabled at IRQ 22
[ 71.911196] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCN] -> GSI 22 (level, low) -> IRQ 17
[ 71.911214] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 72.228814] intel8x0_measure_ac97_clock: measured 54744 usecs
[ 72.228818] intel8x0: clocking to 46923
[ 72.370929] fuse init (API version 7.8)
[ 72.407757] lp: driver loaded but no devices found
[ 72.612318] EXT3 FS on sda3, internal journal
[ 73.039468] NET: Registered protocol family 10
[ 73.039559] lo: Disabled Privacy Extensions
[ 73.142942] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 73.187436] NTFS volume version 3.1.
[ 78.489933] ibm_acpi: ec object not found
[ 78.555187] No dock devices found.
[ 78.566279] input: Power Button (FF) as /class/input/input5
[ 78.566311] ACPI: Power Button (FF) [PWRF]
[ 78.566351] input: Power Button (CM) as /class/input/input6
[ 78.566375] ACPI: Power Button (CM) [VBTN]
[ 78.657314] Using specific hotkey driver
[ 78.730446] pcc_acpi: loading...
[ 83.751836] eth0: no IPv6 routers present
[ 86.837048] hdb: status timeout: status=0xd0 { Busy }
[ 86.837055] ide: failed opcode was: unknown
[ 86.837061] hdb: drive not ready for command
[ 91.839266] hdb: status timeout: status=0xd0 { Busy }
[ 91.839271] ide: failed opcode was: unknown
[ 91.839274] hdb: drive not ready for command
[ 92.838898] ppdev: user-space parallel port driver
[ 94.324752] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 94.324757] apm: disabled - APM is not SMP safe.
[ 94.683398] Bluetooth: Core ver 2.11
[ 94.683451] NET: Registered protocol family 31
[ 94.683453] Bluetooth: HCI device and connection manager initialized
[ 94.683456] Bluetooth: HCI socket layer initialized
[ 94.690461] Bluetooth: L2CAP ver 2.8
[ 94.690466] Bluetooth: L2CAP socket layer initialized
[ 94.729806] Bluetooth: RFCOMM socket layer initialized
[ 94.729820] Bluetooth: RFCOMM TTY layer initialized
[ 94.729822] Bluetooth: RFCOMM ver 1.8
[ 110.600254] eth0: no IPv6 routers present
alsamixer: Code: Card: NVidia CK804
Chip: Realtek ALC850 rev 0
View: [Playback] Capture All
Item: Master [dB gain=0.00, 0.00]
+ volume stuff
cat /proc/asound/modules: sudo gedit /etc/modprobe.d/alsa-base: Code: blank text document
autoloader aliases:
? | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | | |
Ubuntu Help Discussion and help about Ubuntu, Kubuntu, Xubuntu, and all the Ubuntu family
Submit Your Article
Latest Articles
Editor's Choice
Article Categories
Join Linux Forums Today
Win Great Prizes
