Find the answer to your Linux question:
Results 1 to 4 of 4
Hello all, I am having some trouble burning DVDs on Gutsy Gibbon AMD64 (Ubuntu 7.10). I had a copy of Ubuntu Ultimate, which is based on Edgy, installed before and ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Oct 2005
    Location
    Oxford - UK
    Posts
    2

    Unable to burn DVDs


    Hello all,

    I am having some trouble burning DVDs on Gutsy Gibbon AMD64 (Ubuntu 7.10). I had a copy of Ubuntu Ultimate, which is based on Edgy, installed before and I was able to burn DVDs no problem. My processor is an AMD athlon 64 and the DVD drive that I am attempting to use is a Pioneer DVD-RW 108. I have tried 4 different methods of burning an .iso
    1. growisofs command
    2. K3b
    3. Nero for Linux 3
    4. Brasero

    The error messages that I got are shown below:
    growisofs:
    Code:
    treacle@ubuntu:~/Dido 2007$ growisofs -dvd-compat -Z /dev/dvd=rld-di07.iso
    Executing 'builtin_dd if=rld-di07.iso of=/dev/dvd obs=32k seek=0'
    :-[ PERFORM OPC failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
    /dev/dvd: "Current Write Speed" is 12.3x1352KBps.
              0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
              0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
              0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
    :-? the LUN appears to be stuck writing LBA=0h, keep retrying in 47ms
              0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
              0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
              0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
    the LUN continued to be stuck until I close the terminal down

    K3b
    Code:
    System
    -----------------------
    K3b Version: 1.0.3
    
    KDE Version: 3.5.8
    QT Version:  3.3.7
    Kernel:      2.6.22-14-generic
    Devices
    -----------------------
    PIONEER DVD-RW  DVR-108 1.06 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]
    
    PLEXTOR CD-R   PX-W1210A 1.05 (/dev/hdc, ) [CD-R, CD-RW, CD-ROM] [Error] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
    Burned media
    -----------------------
    DVD-R Sequential
    
    Used versions
    -----------------------
    growisofs: 7.0.1
    
    growisofs
    -----------------------
    Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdd obs=32k seek=0'
    :-[ PERFORM OPC failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
    /dev/hdd: "Current Write Speed" is 12.3x1352KBps.
        1605632/2993258496 ( 0.1%) @0.0x, remaining 155:16 RBU 100.0% UBU   2.0%
        1605632/2993258496 ( 0.1%) @0.0x, remaining 248:25 RBU 100.0% UBU 100.0%
    :-? the LUN appears to be stuck writing LBA=310h, keep retrying in 47ms
        1605632/2993258496 ( 0.1%) @0.0x, remaining 341:35 RBU 100.0% UBU 100.0%
        1605632/2993258496 ( 0.1%) @0.0x, remaining 465:48 RBU 100.0% UBU 100.0%
        1605632/2993258496 ( 0.1%) @0.0x, remaining 558:58 RBU 100.0% UBU 100.0%
    :-? the LUN appears to be stuck writing LBA=310h, keep retrying in 47ms
        1605632/2993258496 ( 0.1%) @0.0x, remaining 652:07 RBU 100.0% UBU 100.0%
        1605632/2993258496 ( 0.1%) @0.0x, remaining 776:20 RBU 100.0% UBU 100.0%
    :-[ WRITE@LBA=310h failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
    :-( write failed: Input/output error
    /dev/hdd: flushing cache
    /dev/hdd: updating RMA
    /dev/hdd: closing disc
    
    growisofs command:
    -----------------------
    /usr/bin/growisofs -Z /dev/hdd=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1461552 -dvd-compat -speed=12 -use-the-force-luke=bufsize:32m
    I also noticed that when I started k3b form terminal I got this unhealthy looking messages:
    Code:
    treacle@ubuntu:~$ k3b
    treacle@ubuntu:~$ kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
    (K3bDevice::HalConnection) initializing HAL >= 0.5
    Mapping udi /org/freedesktop/Hal/devices/storage_model_PIONEER_DVD_RW_DVR_108 to device /dev/hdd
    Mapping udi /org/freedesktop/Hal/devices/storage_model_PLEXTOR_CD_R_PX_W1210A to device /dev/hdc
    /dev/hdd resolved to /dev/hdd
    /dev/hdd is block device (64)
    /dev/hdd seems to be cdrom
    (K3bDevice::Device) /dev/hdd: init()
    (K3bDevice::Device) /dev/hdd feature: CD Mastering
    (K3bDevice::Device) /dev/hdd feature: CD Track At Once
    (K3bDevice::Device) /dev/hdd feature: DVD+R
    (K3bDevice::Device) /dev/hdd feature: DVD+RW
    (K3bDevice::Device) /dev/hdd feature: DVD+R Double Layer
    (K3bDevice::Device) /dev/hdd feature: DVD-R/-RW Write
    (K3bDevice::Device) /dev/hdd feature: Rigid Restricted Overwrite
    (K3bDevice::Device) /dev/hdd: dataLen: 60
    (K3bDevice::Device) /dev/hdd: checking for TAO
    (K3bDevice::Device) /dev/hdd: checking for SAO
    (K3bDevice::Device) /dev/hdd: checking for SAO_R96P
    (K3bDevice::Device) /dev/hdd: checking for SAO_R96R
    (K3bDevice::Device) /dev/hdd: checking for RAW_R16
    (K3bDevice::Device) /dev/hdd: checking for RAW_R96P
    (K3bDevice::Device) /dev/hdd: checking for RAW_R96R
    (K3bDevice::Device) /dev/hdd: GET PERFORMANCE dataLen = 136
    (K3bDevice::Device) /dev/hdd: GET PERFORMANCE successful with reported length: 132
    (K3bDevice::Device) /dev/hdd:  Number of supported write speeds via GET PERFORMANCE: 8
    (K3bDevice::Device) /dev/hdd : 22160 KB/s
    (K3bDevice::Device) /dev/hdd : 16620 KB/s
    (K3bDevice::Device) /dev/hdd : 11080 KB/s
    (K3bDevice::Device) /dev/hdd : 8310 KB/s
    (K3bDevice::Device) /dev/hdd : 5540 KB/s
    (K3bDevice::Device) /dev/hdd : 3324 KB/s
    (K3bDevice::Device) /dev/hdd : 2770 KB/s
    (K3bDevice::Device) /dev/hdd : 1385 KB/s
    (K3bDevice::DeviceManager) setting current write speed of device /dev/hdd to 22160
    /dev/hdc resolved to /dev/hdc
    /dev/hdc is block device (0)
    /dev/hdc seems to be cdrom
    (K3bDevice::Device) /dev/hdc: init()
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET CONFIGURATION (46)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::Device) /dev/hdc: dataLen: 60
    (K3bDevice::Device) /dev/hdc: checking for TAO
    (K3bDevice::Device) /dev/hdc: checking for SAO
    (K3bDevice::Device) /dev/hdc: checking for SAO_R96P
    (K3bDevice::Device) /dev/hdc: checking for SAO_R96R
    (K3bDevice::Device) /dev/hdc: checking for RAW_R16
    (K3bDevice::Device) /dev/hdc: checking for RAW_R96P
    (K3bDevice::Device) /dev/hdc: checking for RAW_R96R
    (K3bDevice::ScsiCommand) failed: 
                               command:    GET PERFORMANCE (ac)
                               errorcode:  70
                               sense key:  ILLEGAL REQUEST (5)
                               asc:        20
                               ascq:       0
    (K3bDevice::Device) /dev/hdc: GET PERFORMANCE length det failed.
    (K3bDevice::DeviceManager) setting current write speed of device /dev/hdc to 0
    /dev/hdd resolved to /dev/hdd
    (K3bDevice::DeviceManager) dev /dev/hdd already found
    /dev/hdc resolved to /dev/hdc
    (K3bDevice::DeviceManager) dev /dev/hdc already found
    (K3bDevice::DeviceManager) found config entry for devicetype: PIONEER DVD-RW  DVR-108
    (K3bDevice::DeviceManager) found config entry for devicetype: PLEXTOR CD-R   PX-W1210A
    Devices:
    ------------------------------
    Blockdevice:    /dev/hdd
    Generic device: 
    Vendor:         PIONEER
    Description:    DVD-RW  DVR-108
    Version:        1.06
    Write speed:    16620
    Profiles:       DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
    Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
    Write Cap:      DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
    Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite
    Reader aliases: /dev/hdd
    ------------------------------
    Blockdevice:    /dev/hdc
    Generic device: 
    Vendor:         PLEXTOR
    Description:    CD-R   PX-W1210A
    Version:        1.05
    Write speed:    0
    Profiles:       Error
    Read Cap:       CD-ROM, CD-R, CD-RW
    Write Cap:      CD-R, CD-RW
    Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R
    Reader aliases: /dev/hdc
    ------------------------------
    kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
    QGDict::hashKeyString: Invalid null key
    QGDict::hashKeyString: Invalid null key
    k3b: ERROR: : couldn't create slave : Unable to create io-slave:
    klauncher said: Unknown protocol ''.
    k3b: 
    First sec data area: 43:41:33 (LBA 196608) (402653184
    Last sec data area: 00:00:00 (LBA 0) (0 Bytes)
    Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
    Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
    Layer 2 length: 00:00:00 (LBA 0) (0 Bytes)
    DiskInfo:
    Mediatype:       DVD-R Sequential
    Current Profile: DVD-R Sequential
    Disk state:      empty
    Empty:           1
    Rewritable:      0
    Appendable:      0
    Sessions:        0
    Tracks:          0
    Layers:          1
    Capacity:        510:46:46 (LBA 2298496) (4707319808 Bytes)
    Remaining size:  510:46:46 (LBA 2298496) (4707319808 Bytes)
    Used Size:       00:00:00 (LBA 0) (0 Bytes)
    (K3bDevice::Device) /dev/hdd: GET PERFORMANCE dataLen = 72
    (K3bDevice::Device) /dev/hdd: GET PERFORMANCE successful with reported length: 68
    (K3bDevice::Device) /dev/hdd:  Number of supported write speeds via GET PERFORMANCE: 4
    (K3bDevice::Device) /dev/hdd : 16620 KB/s
    (K3bDevice::Device) /dev/hdd : 11080 KB/s
    (K3bDevice::Device) /dev/hdd : 8310 KB/s
    (K3bDevice::Device) /dev/hdd : 5540 KB/s
    (K3bDevice::Device) /dev/hdd: GET CONFIGURATION length det failed.
    (K3bDevice::Device) /dev/hdd: GET CONFIGURATION length det failed.
    adding udi   /org/freedesktop/Hal/devices/volume_empty_dvd_r
    (K3bDevice::Device) /dev/hdd: GET PERFORMANCE dataLen = 72
    (K3bDevice::Device) /dev/hdd: GET PERFORMANCE successful with reported length: 68
    (K3bDevice::Device) /dev/hdd:  Number of supported write speeds via GET PERFORMANCE: 4
    (K3bDevice::Device) /dev/hdd : 16620 KB/s
    (K3bDevice::Device) /dev/hdd : 11080 KB/s
    (K3bDevice::Device) /dev/hdd : 8310 KB/s
    (K3bDevice::Device) /dev/hdd : 5540 KB/s
    (K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_PIONEER_DVD_RW_DVR_108
    (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_PIONEER_DVD_RW_DVR_108
    removing udi /org/freedesktop/Hal/devices/volume_empty_dvd_r
    Nero for Linux 3
    Code:
    2CA0-7324-1800-2000-4077-1CEE-****
    
    Linux 2.6.22-14-generic
    Nero API version: 7.5.14.9
    Using interface version: 7.5.1.2
    Installed in: /usr/lib64/nero/
    Application: Nero AG\Nero Linux
    Internal Version: 7, 5, 14, 9
    
    Recorder:             <PIONEER DVD-RW  DVR-108> Version: 1.06 - HA 0 TA 1 - 0.0.0.0
     Adapter driver:      <ide-cdrom>               HA 0
     Drive buffer  :      2000kB
     Bus Type      :      default (0) -> ATAPI, detected: ?
    Excluded drive IDs: 
    WriteBufferSize: 73400320 (0) Byte
    BUFE           : 0
    Physical memory     : 500MB (512328kB)
    Free physical memory: 73MB (75504kB)
    Memory in use       : 85 %
    Uncached PFiles: 0x0
    Use Inquiry    : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0) 
    
    19.11.2007
    NeroAPI
    12:52:04	#1 Phase 114 File ExtendedProgress.cpp, Line 537
    	DVD-Video files reallocation completed (no file modified)
    	
    12:52:05	#2 Phase 111 File ExtendedProgress.cpp, Line 537
    	DVD-Video files sorted
    	
    12:52:05	#3 ISO9660GEN -11 File Geniso.cpp, Line 3341
    	First writeable address = 0 (0x00000000)
    	
    12:52:06	#4 ISO9660GEN -11 File Geniso.cpp, Line 3341
    	First writeable address = 0 (0x00000000)
    	
    12:52:06	#5 Text 0 File Burncd.cpp, Line 3490
    	Turn on Disc-At-Once, using DVD media
    	
    12:52:07	#6 Text 0 File DlgWaitCD.cpp, Line 307
    	Last possible write address on media:  2298495 (510:46.45, 4489MB)
    	Last address to be written:            1190239 (264:29.64, 2324MB)
    	
    12:52:07	#7 Text 0 File DlgWaitCD.cpp, Line 319
    	Write in overburning mode: NO
    	
    12:52:07	#8 Text 0 File DlgWaitCD.cpp, Line 2952
    	Recorder: PIONEER DVD-RW  DVR-108, Media type: DVD-R
    	 Disc Manufacturer: RITEKG - 05
    	 Disc Application Code: 64, Disc Physical Code: 193
    	
    12:52:07	#9 Text 0 File DlgWaitCD.cpp, Line 493
    	>>> Protocol of DlgWaitCD activities: <<<
    	=========================================
    	
    12:52:07	#10 Text 0 File ThreadedTransferInterface.cpp, Line 792
    	Setup items (after recorder preparation)
    	 0: TRM_DATA_MODE1 ()
    	    2 indices, index0 (150) not provided
    	    original disc pos #0 + 1190240 (1190240) = #1190240/264:29.65
    	    relocatable, disc pos for caching/writing not required/ required
    	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1190240 blocks [PIONEER DVD-RW  DVR-108 (H:0 T:1)]
    	--------------------------------------------------------------
    	
    12:52:07	#11 Text 0 File ThreadedTransferInterface.cpp, Line 995
    	Prepare [PIONEER DVD-RW  DVR-108 (H:0 T:1)] for write in CUE-sheet-DAO
    	DAO infos:
    	==========
    	 MCN: ""
    	 TOCType: 0x00; Session Closed, disc fixated
    	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
    	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    2437611520, ISRC ""
    	DAO layout:
    	===========
    	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
    	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
    	        0 |        1 |   1 |    0x41 |  1190240 |        0 | 0x00
    	  1190240 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    	
    12:52:07	#12 Text 0 File Burncd.cpp, Line 4263
    	Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
    	
    12:52:07	#13 Phase 24 File ExtendedProgress.cpp, Line 537
    	Caching of files started
    	
    12:52:07	#14 Text 0 File Burncd.cpp, Line 4382
    	Cache writing successful.
    	
    12:52:07	#15 Phase 25 File ExtendedProgress.cpp, Line 537
    	Caching of files completed
    	
    12:52:07	#16 Phase 28 File ExtendedProgress.cpp, Line 537
    	Speed measurement started
    	
    12:52:07	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
    	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    	
    12:52:07	#18 Text 0 File ThreadedTransfer.cpp, Line 269
    	Pipe memory size 590400
    	
    12:53:47	#19 Text 0 File WriterStatus.cpp, Line 113
    	<PIONEER DVD-RW  DVR-108 (H:0 T:1)> start writing Lead-Out at LBA 1190240 (122960h), length 0 blocks
    	
    12:53:47	#20 Phase 29 File ExtendedProgress.cpp, Line 470
    	Speed measurement completed: 17.3x (23996 KB/s)
    	
    12:53:47	#21 Phase 36 File ExtendedProgress.cpp, Line 537
    	Burn process started at 4x (5540 KB/s)
    	
    12:53:47	#22 Text 0 File ThreadedTransferInterface.cpp, Line 2712
    	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    	
    12:53:47	#23 Text 0 File DVDR.cpp, Line 3159
    	Recording mode: Sequential Recording Mode
    	
    12:53:47	#24 Text 0 File DVDR.cpp, Line 3315
    	Start write address at LBA 0
    	DVD high compatibility mode: Yes
    	
    12:53:47	#25 Text 0 File Cdrdrv.cpp, Line 9915
    	---- Disc Structure: Physical Format Information (00h) ----
    	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    	 Data in Burst Cutting Area (BCA) does not exist
    	  Revision number of maximum recording speed: 3.0
    	  Revision number of minimum recording speed: 0.0
    	  Revision number table of recording speed: 0.1 0.2 0.3 - - - 0.4 
    	  Class: 0
    	  Start sector number of the current Border-Out: 0 h
    	  Start sector number of the next Border-In:     0 h
    	 Media Specific [16..63]:
    	    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00    .0..............
    	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    	
    12:53:47	#26 Text 0 File ThreadedTransfer.cpp, Line 269
    	Pipe memory size 73340800
    	
    12:53:48	#27 Text 0 File Cdrdrv.cpp, Line 1348
    	12:53:48 - PIONEER DVD-RW  DVR-108 (H:0 T:1) : Queue again later
    	
    12:54:01	#28 SCSI -1061 File SCSIInterface.cpp, Line 622
    	SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0x2aaab30e4640
    	Status:     0x04 (0x01, SCSI_ERR)
    	HA-Status   0x00 (0x00, OK)
    	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
    	Sense Code: 0x44
    	Sense Qual: 0xD9
    	CDB Data:   0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
    	Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 
    	            0x00 0x00 0x00 0x00 0x44 0xD9 
    	
    12:54:01	#29 CDR -1061 File Writer.cpp, Line 299
    	Internal target failure
    	PIONEER DVD-RW  DVR-108 (H:0 T:1)
    	
    12:54:01	#30 Text 0 File DVDR.cpp, Line 3717
    	EndDAO: Last written address was 767 (2FFh)
    	
    12:54:01	#31 Phase 38 File ExtendedProgress.cpp, Line 537
    	Burn process failed at 4x (5540 KB/s)
    Brasero
    Code:
    imager (BraseroLocalImage) set_output
    job (BraseroLocalImage) set_task
    imager (BraseroLocalImage) get_track
    job (BraseroLocalImage) set_task
    Session starting:
    	flags			= 8535 
    	media type	= 0
    	speed		= 0
    	track type		= 8
    	track format	= 2
    	output		= none
    job (BraseroGrowisofs) set_rate
    recorder (BraseroGrowisofs) set_drive
    recorder (BraseroGrowisofs) set_flags
    job (BraseroGrowisofs) set_source
    job (BraseroGrowisofs) set_task
    recorder (BraseroGrowisofs) record
    process (BraseroGrowisofs) getting varg
    growisofs (BraseroGrowisofs) set_action
    process (BraseroGrowisofs) got varg:
    	growisofs
    	-use-the-force-luke=notray
    	-use-the-force-luke=dao
    	-dvd-compat
    	-use-the-force-luke=tty
    	-Z
    	/dev/hdd=/home/jim/Fifa 2007/rld-fi07.iso
    process (BraseroGrowisofs) launching command
    process (BraseroGrowisofs) stdout: Executing 'builtin_dd if=/home/jim/Fifa 2007/rld-fi07.iso of=/dev/hdd obs=32k seek=0'
    process (BraseroGrowisofs) stderr: /dev/hdd: engaging DVD-R DAO upon user request...
    process (BraseroGrowisofs) stderr: :-[ PERFORM OPC failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
    process (BraseroGrowisofs) stderr: /dev/hdd: reserving 1461552 blocks
    process (BraseroGrowisofs) stderr: /dev/hdd: "Current Write Speed" is 4.1x1352KBps.
    process (BraseroGrowisofs) stdout:     1605632/2993258496 ( 0.1%) @0.0x, remaining 155:16 RBU 100.0% UBU   2.0%
    growisofs (BraseroGrowisofs) set_written
    growisofs (BraseroGrowisofs) set_total
    growisofs (BraseroGrowisofs) set_rate
    growisofs (BraseroGrowisofs) set_action
    growisofs (BraseroGrowisofs) start_progress
    process (BraseroGrowisofs) stdout:     1605632/2993258496 ( 0.1%) @0.0x, remaining 248:25 RBU 100.0% UBU 100.0%
    growisofs (BraseroGrowisofs) set_written
    growisofs (BraseroGrowisofs) set_total
    growisofs (BraseroGrowisofs) set_rate
    growisofs (BraseroGrowisofs) set_action
    growisofs (BraseroGrowisofs) start_progress
    process (BraseroGrowisofs) stderr: :-[ WRITE@LBA=310h failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
    process (BraseroGrowisofs) stderr: :-( write failed: Input/output error
    job (BraseroGrowisofs) asked to stop
    	status	= 1
    	error		= 1
    	message	= "Unhandled error, aborting"
    iter (BraseroGrowisofs) stopping
    process (BraseroGrowisofs) got killed
    iter (BraseroGrowisofs) stopped
    job (BraseroGrowisofs) got out of loop
    job (BraseroGrowisofs) set_task
    Session error : Unhandled error, aborting
    Following this link PCBurn - Growisofs WRITE Errors I have found that the SK=4h/ASC=44h/ACQ=D9h error message means "4 44 00 INTERNAL TARGET FAILURE" (if my hex translation is right!) this unfortunately leaves me none the wiser.

    My present theory is that this:
    (K3bDevice::ScsiCommand) failed
    means that I should be running the drive as a Scsi emulated one, which is something I had to do when I was running Breezy Badger.

    Another theory is that the "dvd+rw-tools" which appears to contain the growisofs package in Gutsy has one which is incompatible with my set up, so I was thinking of down grading it to the version that comes with Edgy, does anyone know what this is called and where I can get it? And if it is wise to do such a thing?!

    Any help appreciated,

    Jim

  2. #2
    Just Joined!
    Join Date
    Oct 2005
    Location
    Oxford - UK
    Posts
    2

    Problem Solved

    I managed to burn my DVD in the end you will all be pleased to hear. First I cleaned the lens then I used a better quality of media (Maxwell are much better than Tesco value - surprise, surprise)

  3. #3
    oz
    oz is offline
    forum.guy
    Join Date
    May 2004
    Location
    arch linux
    Posts
    18,733
    Glad you got it going - thanks for reporting back with the fix!
    oz

  4. $spacer_open
    $spacer_close
  5. #4
    Just Joined!
    Join Date
    Aug 2008
    Location
    korea
    Posts
    1

    Thumbs up Another fix to K3B failure to write large iso

    Quote Originally Posted by linuxjim View Post
    I managed to burn my DVD in the end you will all be pleased to hear. First I cleaned the lens then I used a better quality of media (Maxwell are much better than Tesco value - surprise, surprise)
    This fix unfortunately didn't work in my case. I was using the same media i had used previously anyway. I had near identical error readouts and symptoms though. So for those reading here, i hit on a fix that may work for you as well. In my case, the burner spun and didn't write. My Sony DRU-720A even made funny click noises until I ejected the media. After a lengthy stall, the error message indicated that the media couldn't be written to – some input/ouput problem.

    I had previously burned using K3B, single files larger than 4GB. In this instance 4.1GB (4300046336 Bytes). I used Memorex 16X DVD-R Media (as I had done previously). Problem appeared after upgrading my OS from Mandriva 2008.1 – i ran software as root, tried 2 distro's (MDV 2009.0 and Fedora 9), cleaned my writer lens, tried kde3, kde4, xfce, gnome, icewm, and all the burning software (xfburn gnomebake, brasero), and even considered bying a new writer. Fortunately, the stores were closed over a long weekend. So, THANKs to the Korean independence day holiday (indirectly), and my natural persistant and annoying tendency to never give in to defeat - here's what worked. And it didn't coast me any Korean Won either:

    1. Removed the latest version of k3b. (Mandriva 2009.0 and Fedora's 9 repo's installed the KDE4 version by default).
    2. Booted into the oldest kernel on my box (2.6.26-desktop586-2mnb).
    3. Not sure if THIS is needed, but i ran k3b as root.
    4. I guessed from one of the terminal readouts that KDE launcher may have been crashing the operation at some stage after I reverted to the older version, so I booted into xfce
    5. My selections on the K3B version – mandriva package kde3-k3b-1.0.5-3mdv2009.0.i586 were as follows: speed: 6, writing> writing mode: auto, filesystem> uncheck Rock Ridge and Joliet extensions, Uncheck Generate UDF structures Other settings: unchecked Force input charset and Preserve file permissions. ISO level: level 3, No Rock Ridge Settings Misc> No Multisession

    I am not sure where the problem really lay – kernel, KDE, KDE4 or the burn backends - but I hope my experience is of more use to someone else. Good luck.
    Last edited by hq197; 08-16-2008 at 11:59 PM. Reason: punctuation spelling

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •