Need help with wireless connection

[dreamcaster_22]

Okay - first of all I'm a complete n00b. Second I did try to do some research and came up empty handed.

So here is my problem:

I have a wireless PCMCIA card by linksys model # WPC54GS Ver. 2 and it won't connect to my wireless router. It recognizes the card, but won't recognize the network.

So I know I probably need to post some info, but what do I need to post?

I'm using Linux Mint 6 "Felicia" based on Ubuntu 8.10 Intrepid Ibex, Linux 2.6.27, Gnome 2.24 and Xorg 7.4

Learning but need help. Thanks.

[MikeTbob]

Hello and welcome to Linuxforums
Check out this thread and post the relevant info back here, someone should be able to help you then.
http://www.linuxforums.org/forum/wir...tart-here.html

[dreamcaster_22]

I though I might need that... I had the terminal open just in case.

lspci returns:

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
02:01.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller
03:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)

lspci -n returns:

00:00.0 0600: 8086:2570 (rev 02)
00:01.0 0604: 8086:2571 (rev 02)
00:1d.0 0c03: 8086:24d2 (rev 02)
00:1d.1 0c03: 8086:24d4 (rev 02)
00:1d.2 0c03: 8086:24d7 (rev 02)
00:1d.3 0c03: 8086:24de (rev 02)
00:1d.7 0c03: 8086:24dd (rev 02)
00:1e.0 0604: 8086:244e (rev c2)
00:1f.0 0601: 8086:24d0 (rev 02)
00:1f.1 0101: 8086:24db (rev 02)
00:1f.5 0401: 8086:24d5 (rev 02)
00:1f.6 0703: 8086:24d6 (rev 02)
01:00.0 0300: 1002:4e50
02:00.0 0200: 14e4:165d (rev 01)
02:01.0 0607: 104c:ac44 (rev 02)
02:01.1 0c00: 104c:8029
03:00.0 0280: 14e4:4318 (rev 02)

dmesg returns:

[ 8672.057041] pccard: CardBus card inserted into slot 0
[ 8672.057082] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, 1fff]
[ 8672.057854] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
[ 8672.057874] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8672.057893] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 8672.129395] b43-phy3: Broadcom 4318 WLAN found
[ 8672.203569] phy3: Selected rate control algorithm 'pid'
[ 8672.204893] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 8676.252098] input: b43-phy3 as /devices/virtual/input/input16
[ 8676.356042] firmware: requesting b43/ucode5.fw
[ 8676.359055] b43-phy3 ERROR: Firmware file "b43/ucode5.fw" not found
[ 8676.359072] b43-phy3 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 8676.400390] input: b43-phy3 as /devices/virtual/input/input17
[ 8676.456065] firmware: requesting b43/ucode5.fw
[ 8676.460872] b43-phy3 ERROR: Firmware file "b43/ucode5.fw" not found
[ 8676.460884] b43-phy3 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.


dmesg | grep firmware returns:

[ 38.045048] firmware: requesting b43/ucode5.fw
[ 38.073190] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 38.204059] firmware: requesting b43/ucode5.fw
[ 38.206941] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 6410.465056] firmware: requesting b43/ucode5.fw
[ 6410.476010] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 6450.820626] firmware: requesting b43/ucode5.fw
[ 6450.834650] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 7825.673089] firmware: requesting b43/ucode5.fw
[ 7825.680626] b43-phy2 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 7825.853840] firmware: requesting b43/ucode5.fw
[ 7825.885001] b43-phy2 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 8676.356042] firmware: requesting b43/ucode5.fw
[ 8676.359072] b43-phy3 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 8676.456065] firmware: requesting b43/ucode5.fw
[ 8676.460884] b43-phy3 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.

Now I got the b43 fwcutter ans the drivers to install the firmware, extracted it and tried to install it and at the last minute gave me this error:

dreamscape@Magi ~/broadcom-wl-4.150.10.5/driver $ sudo ../../b43-fwcutter-011/b43-fwcutter -w lib/firmware wl_apsta.o
Sorry, the input file is either wrong or not supported by b43-fwcutter.
This file has an unknown MD5sum 80c7bb743de4025f57ac7166dac7bc4a.
dreamscape@Magi ~/broadcom-wl-4.150.10.5/driver $ sudo ../../b43-fwcutter-011/b43-fwcutter -w lib/firmware wl_apsta.0 --force
Cannot open input file wl_apsta.0

I was using this tutorial:
b43 - Linux Wireless

[dreamcaster_22]

Okay, I realized I typed the filename wrong and when I did I got this:

dreamscape@Magi ~/broadcom-wl-4.150.10.5/driver $ sudo ../../b43-fwcutter-011/b43-fwcutter -w lib/firmware wl_apsta_mimo.o
[sudo] password for dreamscape:
This file is recognised as:
ID : FW13
filename : wl_apsta_mimo.o
version : 410.2160
MD5 : cb8d70972b885b1f8883b943c0261a3c
Extracting b43/pcm5.fw
failed to create output directory: No such file or directory

[MikeTbob]

I'm not entirely sure what's going on here, you could be making a typo or it could be something else. Anyone else have any ideas?

[MikeTbob]

Ok, I think I see it now.
sudo ../../b43-fwcutter-011/b43-fwcutter -w lib/firmware wl_apsta_mimo.o
should be
sudo ../../b43-fwcutter-011/b43-fwcutter -w /lib/firmware wl_apsta_mimo.o
Notice the / in front of /lib is mssing from your command.

[dreamcaster_22]

HA!! It extracted. Now it still won't connect to the router though.

[MikeTbob]

Are you using the icon in the system tray? I believe it's network manager.
did you get the firmware to install with no errors? After this has all been done, post the output of this command

dmesg

[dreamcaster_22]

Okay, no problems in the firmware install, and the network manager recognizes the card, but not the network. Nothing.

The router is setup to broadcast the SSID but it's not picking it up.

Duh... forgot to post

output from dmsg:
[ 0.584145] groups: 1 0
[ 0.584150] domain 1: span 0-1 level CPU
[ 0.584152] groups: 0-1
[ 0.584304] net_namespace: 840 bytes
[ 0.584304] Booting paravirtualized kernel on bare hardware
[ 0.584482] Time: 15:17:32 Date: 01/22/09
[ 0.584534] NET: Registered protocol family 16
[ 0.584570] EISA bus registered
[ 0.584570] ACPI: bus type pci registered
[ 0.631539] PCI: PCI BIOS revision 2.10 entry at 0xfcc7e, last bus=2
[ 0.631542] PCI: Using configuration type 1 for base access
[ 0.632903] ACPI: EC: Look up EC in DSDT
[ 0.644986] ACPI: Interpreter enabled
[ 0.644998] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.645020] ACPI: Using IOAPIC for interrupt routing
[ 0.661240] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.661240] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, efffffff]
[ 0.661240] PCI: 0000:00:1d.0 reg 20 io port: [bf80, bf9f]
[ 0.661240] PCI: 0000:00:1d.1 reg 20 io port: [bf60, bf7f]
[ 0.661240] PCI: 0000:00:1d.2 reg 20 io port: [bf40, bf5f]
[ 0.661240] PCI: 0000:00:1d.3 reg 20 io port: [bf20, bf3f]
[ 0.661240] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f8fffc00, f8ffffff]
[ 0.661240] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.661240] pci 0000:00:1d.7: PME# disabled
[ 0.661240] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.661240] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.661240] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 GPIO
[ 0.661240] PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
[ 0.661240] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
[ 0.661240] PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
[ 0.661240] PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
[ 0.661240] PCI: 0000:00:1f.1 reg 20 io port: [bfa0, bfaf]
[ 0.661240] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
[ 0.661240] PCI: 0000:00:1f.5 reg 10 io port: [d800, d8ff]
[ 0.661240] PCI: 0000:00:1f.5 reg 14 io port: [dc40, dc7f]
[ 0.661240] PCI: 0000:00:1f.5 reg 18 32bit mmio: [f8fff800, f8fff9ff]
[ 0.661240] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [f8fff400, f8fff4ff]
[ 0.661240] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.661240] pci 0000:00:1f.5: PME# disabled
[ 0.661240] PCI: 0000:00:1f.6 reg 10 io port: [d400, d4ff]
[ 0.661240] PCI: 0000:00:1f.6 reg 14 io port: [d080, d0ff]
[ 0.661240] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.661240] pci 0000:00:1f.6: PME# disabled
[ 0.661240] PCI: 0000:01:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
[ 0.661240] PCI: 0000:01:00.0 reg 14 io port: [c000, c0ff]
[ 0.661240] PCI: 0000:01:00.0 reg 18 32bit mmio: [fcff0000, fcffffff]
[ 0.661240] PCI: 0000:01:00.0 reg 30 32bit mmio: [80000000, 8001ffff]
[ 0.661240] pci 0000:01:00.0: supports D1
[ 0.661240] pci 0000:01:00.0: supports D2
[ 0.661261] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.661265] PCI: bridge 0000:00:01.0 32bit mmio: [fc000000, fdffffff]
[ 0.661279] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000, f7ffffff]
[ 0.661355] PCI: 0000:02:00.0 reg 10 64bit mmio: [faff0000, faffffff]
[ 0.661392] PCI: 0000:02:00.0 reg 30 32bit mmio: [fb000000, fb00ffff]
[ 0.661419] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.661424] pci 0000:02:00.0: PME# disabled
[ 0.661472] PCI: 0000:02:01.0 reg 10 32bit mmio: [0, fff]
[ 0.661486] pci 0000:02:01.0: supports D1
[ 0.661488] pci 0000:02:01.0: supports D2
[ 0.661491] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.661504] pci 0000:02:01.0: PME# disabled
[ 0.661542] PCI: 0000:02:01.1 reg 10 32bit mmio: [fafef800, fafeffff]
[ 0.661549] PCI: 0000:02:01.1 reg 14 32bit mmio: [fafe8000, fafebfff]
[ 0.661604] pci 0000:02:01.1: supports D1
[ 0.661606] pci 0000:02:01.1: supports D2
[ 0.661609] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.661613] pci 0000:02:01.1: PME# disabled
[ 0.661675] pci 0000:00:1e.0: transparent bridge
[ 0.661680] PCI: bridge 0000:00:1e.0 io port: [e000, efff]
[ 0.661693] PCI: bridge 0000:00:1e.0 32bit mmio: [fa000000, fbffffff]
[ 0.661732] bus 00 -> node 0
[ 0.661740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.664509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.664676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.672756] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.672756] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 0.672756] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 0.672943] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 0.676109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.676347] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.676473] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.676473] pnp: PnP ACPI init
[ 0.676473] ACPI: bus type pnp registered
[ 0.697994] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.697994] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.697994] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.697994] pnp 00:03: io resource (0x1010-0x105f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.697994] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.703300] pnp: PnP ACPI: found 11 devices
[ 0.703303] ACPI: ACPI bus type pnp unregistered
[ 0.703307] PnPBIOS: Disabled by ACPI PNP
[ 0.704092] PCI: Using ACPI for IRQ routing
[ 0.708049] NET: Registered protocol family 8
[ 0.708062] NET: Registered protocol family 20
[ 0.708094] NetLabel: Initializing
[ 0.708094] NetLabel: domain hash size = 128
[ 0.708094] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.708098] NetLabel: unlabeled traffic allowed by default
[ 0.708187] hpet clockevent registered
[ 0.708193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.708199] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.710070] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.710073] actual entries 65620
[ 0.710252] AppArmor: AppArmor Filesystem Enabled
[ 0.712044] Switched to high resolution mode on CPU 0
[ 0.712512] Switched to high resolution mode on CPU 1
[ 0.712554] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.712567] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.712570] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.712573] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.712577] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.712580] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 0.712583] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[ 0.712586] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.712599] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.712602] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.712605] system 00:00: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.712608] system 00:00: iomem range 0xfecf0000-0xfecf0fff could not be reserved
[ 0.712618] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.712631] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.712638] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.712642] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.712645] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.712648] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[ 0.712668] system 00:08: ioport range 0x900-0x97f has been reserved
[ 0.748668] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.748682] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.748688] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
[ 0.748693] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 0.748720] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.748723] pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff
[ 0.748728] pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff
[ 0.748733] pci 0000:02:01.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.748747] pci 0000:02:01.0: MEM window: 0x58000000-0x5bffffff
[ 0.748751] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.748755] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.748761] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfbffffff
[ 0.748775] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000055ffffff
[ 0.748794] pci 0000:00:1e.0: setting latency timer to 64
[ 0.748813] pci 0000:02:01.0: enabling device (0000 -> 0003)
[ 0.748821] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.748829] bus: 00 index 0 io port: [0, ffff]
[ 0.748841] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.748843] bus: 01 index 0 io port: [c000, cfff]
[ 0.748846] bus: 01 index 1 mmio: [fc000000, fdffffff]
[ 0.748848] bus: 01 index 2 mmio: [f0000000, f7ffffff]
[ 0.748850] bus: 01 index 3 mmio: [0, 0]
[ 0.748853] bus: 02 index 0 io port: [e000, efff]
[ 0.748855] bus: 02 index 1 mmio: [fa000000, fbffffff]
[ 0.748858] bus: 02 index 2 mmio: [50000000, 55ffffff]
[ 0.748860] bus: 02 index 3 io port: [0, ffff]
[ 0.748872] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.748874] bus: 03 index 0 io port: [e000, e0ff]
[ 0.748876] bus: 03 index 1 io port: [e400, e4ff]
[ 0.748879] bus: 03 index 2 mmio: [50000000, 53ffffff]
[ 0.748881] bus: 03 index 3 mmio: [58000000, 5bffffff]
[ 0.748902] NET: Registered protocol family 2
[ 0.761101] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.761548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.762052] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.762412] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.762415] TCP reno registered
[ 0.765172] NET: Registered protocol family 1
[ 0.765373] checking if image is initramfs... it is
[ 1.659098] Freeing initrd memory: 8698k freed
[ 1.661530] audit: initializing netlink socket (disabled)
[ 1.661548] type=2000 audit(1232637452.660:1): initialized
[ 1.668241] highmem bounce pool size: 64 pages
[ 1.668250] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.673530] VFS: Disk quotas dquot_6.5.1
[ 1.673700] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.673910] msgmni has been set to 1761
[ 1.674170] io scheduler noop registered
[ 1.674173] io scheduler anticipatory registered
[ 1.674176] io scheduler deadline registered
[ 1.674199] io scheduler cfq registered (default)
[ 1.674331] pci 0000:01:00.0: Boot video device
[ 1.675152] isapnp: Scanning for PnP cards...
[ 2.032996] isapnp: No Plug & Play device found
[ 2.115990] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.117241] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.117257] serial 0000:00:1f.6: PCI INT B disabled
[ 2.121358] brd: module loaded
[ 2.121508] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.121785] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.134533] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.134541] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.135285] mice: PS/2 mouse device common for all mice
[ 2.135590] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.135624] rtc0: alarms up to one day, hpet irqs
[ 2.135941] EISA: Probing bus 0 at eisa.0
[ 2.135950] Cannot allocate resource for EISA slot 1
[ 2.135995] EISA: Detected 0 cards.
[ 2.136000] cpuidle: using governor ladder
[ 2.136003] cpuidle: using governor menu
[ 2.136956] TCP cubic registered
[ 2.137017] Using IPI No-Shortcut mode
[ 2.137481] registered taskstats version 1
[ 2.137647] Magic number: 9:930:285
[ 2.137783] acpi PNP0C04:00: hash matches
[ 2.137834] rtc_cmos 00:06: setting system clock to 2009-01-22 15:17:34 UTC (1232637454)
[ 2.137838] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.137840] EDD information not available.
[ 2.138194] Freeing unused kernel memory: 424k freed
[ 2.138280] Write protecting the kernel text: 2576k
[ 2.138324] Write protecting the kernel read-only data: 936k
[ 2.139782] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.388242] fuse init (API version 7.9)
[ 2.532642] ACPI: SSDT 3FFEFE54, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522)
[ 2.536079] processor ACPI0007:00: registered as cooling_device0
[ 2.536087] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.536434] ACPI: SSDT 3FFEFDF8, 005C (r1 PmRef Cpu1Cst 3000 INTL 20030522)
[ 3.033608] processor ACPI0007:01: registered as cooling_device1
[ 3.033614] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.124061] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.129798] ACPI: Thermal Zone [THM] (74 C)
[ 3.588176] usbcore: registered new interface driver usbfs
[ 3.588242] usbcore: registered new interface driver hub
[ 3.588376] usbcore: registered new device driver usb
[ 3.626699] USB Universal Host Controller Interface driver v3.0
[ 3.634161] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.634187] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.634206] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.634311] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.634377] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 3.634775] usb usb1: configuration #1 chosen from 1 choice
[ 3.634850] hub 1-0:1.0: USB hub found
[ 3.634876] hub 1-0:1.0: 2 ports detected
[ 3.736807] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.736824] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.736844] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.736914] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.737002] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60
[ 3.737290] usb usb2: configuration #1 chosen from 1 choice
[ 3.737385] hub 2-0:1.0: USB hub found
[ 3.737398] hub 2-0:1.0: 2 ports detected
[ 3.944676] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.944703] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.944710] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.944803] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.944887] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 3.945639] usb usb3: configuration #1 chosen from 1 choice
[ 3.945755] hub 3-0:1.0: USB hub found
[ 3.945771] hub 3-0:1.0: 2 ports detected
[ 4.049627] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.049641] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.049661] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.049753] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.049796] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bf20
[ 4.050080] usb usb4: configuration #1 chosen from 1 choice
[ 4.050174] hub 4-0:1.0: USB hub found
[ 4.050199] hub 4-0:1.0: 2 ports detected
[ 4.057109] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 4.153708] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.153740] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.153746] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.153815] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.157745] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.157768] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 4.157801] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8fffc00
[ 4.205059] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.205422] usb usb5: configuration #1 chosen from 1 choice
[ 4.205511] hub 5-0:1.0: USB hub found
[ 4.205538] hub 5-0:1.0: 8 ports detected
[ 4.348280] No dock devices found.
[ 4.481866] ohci1394 0000:02:01.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.532054] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fafef800-fafeffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.554681] tg3.c:v3.94 (August 14, 200
[ 4.554717] tg3 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.556291] SCSI subsystem initialized
[ 4.633396] usb 2-2: device not accepting address 2, error -71
[ 4.677242] eth0: Tigon3 [partno(BCM95705A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:43:6c:01:4e
[ 4.677253] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.677272] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 4.693169] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 4.798351] libata version 3.00 loaded.
[ 4.805444] pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
[ 4.805471] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.805564] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 4.805602] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 4.826848] ata_piix 0000:00:1f.1: version 2.12
[ 4.826881] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.826997] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.827220] scsi0 : ata_piix
[ 4.828585] scsi1 : ata_piix
[ 4.830785] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 4.830792] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 4.993963] ata1.00: ATA-6: HTS548060M9AT00, MGBOA5EA, max UDMA/100
[ 4.993972] ata1.00: 117210240 sectors, multi 8: LBA48
[ 5.021951] ata1.00: configured for UDMA/100
[ 5.110875] usb 2-2: new low speed USB device using uhci_hcd and address 4
[ 5.188146] ata2.00: ATAPI: SAMSUNG CDRW/DVD SN-324S, U303, max UDMA/33
[ 5.208959] ata2.00: configured for UDMA/33
[ 5.209317] scsi 0:0:0:0: Direct-Access ATA HTS548060M9AT00 MGBO PQ: 0 ANSI: 5
[ 5.210731] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SN-324S U303 PQ: 0 ANSI: 5
[ 5.289291] usb 2-2: configuration #1 chosen from 1 choice
[ 5.607297] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.607421] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.661535] Driver 'sr' needs updating - please use bus_type methods
[ 5.671779] sr0: scsi3-mmc drive: 5x/24x writer cd/rw xa/form2 cdda tray
[ 5.671788] Uniform CD-ROM driver Revision: 3.20
[ 5.672135] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.681933] Driver 'sd' needs updating - please use bus_type methods
[ 5.683987] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 5.684109] sd 0:0:0:0: [sda] Write Protect is off
[ 5.684114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.684210] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.684424] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 5.684469] sd 0:0:0:0: [sda] Write Protect is off
[ 5.684488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.684581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.684591] sda:<6>usbcore: registered new interface driver hiddev
[ 5.705447] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[ 5.709452] sda1 sda2 <<6>input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2
[ 5.713423] usbcore: registered new interface driver usbhid
[ 5.713442] usbhid: v2.6:USB HID core driver
[ 5.736237] sda5 >
[ 5.736909] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.825420] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc000013660c1]
[ 5.994715] PM: Starting manual resume from disk
[ 5.994720] PM: Resume from partition 8:5
[ 5.994722] PM: Checking hibernation image.
[ 5.994974] PM: Resume from disk failed.
[ 6.035086] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.035107] EXT3-fs: write access will be enabled during recovery.
[ 11.801279] kjournald starting. Commit interval 5 seconds
[ 11.801303] EXT3-fs: recovery complete.
[ 11.802706] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.880690] udevd version 124 started
[ 20.547849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.574585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.701459] Linux agpgart interface v0.103
[ 20.715438] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 20.740600] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 20.826436] intel_rng: FWH not detected
[ 21.017718] iTCO_vendor_support: vendor-support=0
[ 21.154403] ACPI: AC Adapter [AC] (on-line)
[ 21.171912] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 21.172429] ACPI: Lid Switch [LID]
[ 21.172525] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 21.183594] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-200
[ 21.183712] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
[ 21.183871] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.196072] ACPI: Power Button (CM) [PBTN]
[ 21.196208] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 21.228036] ACPI: Sleep Button (CM) [SBTN]
[ 21.579824] ACPI: Battery Slot [BAT0] (battery present)
[ 21.947975] Yenta: CardBus bridge found at 0000:02:01.0 [1028:017c]
[ 21.948021] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 21.948026] Yenta: Routing CardBus interrupts to PCI
[ 21.948033] Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64
[ 22.180816] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[ 22.180822] Socket status: 30000020
[ 22.180827] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 22.180836] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 22.180841] cs: IO port probe 0xe000-0xefff: clean.
[ 22.181239] pcmcia: parent PCI bridge Memory window: 0xfa000000 - 0xfbffffff
[ 22.181245] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
[ 22.332083] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/device:21/input/input6
[ 22.356061] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 22.624302] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 22.856058] pccard: CardBus card inserted into slot 0
[ 22.856093] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, 1fff]
[ 23.135090] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 23.135116] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 23.292567] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 23.350581] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 23.394197] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 23.961033] intel8x0_measure_ac97_clock: measured 55408 usecs
[ 23.961039] intel8x0: clocking to 48000
[ 24.443462] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
[ 24.443482] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 24.443499] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 24.491921] cs: IO port probe 0x100-0x3af: clean.
[ 24.493154] cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.493682] cs: IO port probe 0x820-0x8ff: clean.
[ 24.494126] cs: IO port probe 0xc00-0xcf7: clean.
[ 24.494791] cs: IO port probe 0xa00-0xaff: clean.
[ 24.500120] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 24.680105] cfg80211: Using static regulatory domain info
[ 24.680110] cfg80211: Regulatory domain: US
[ 24.680114] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.680119] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 24.680130] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.680135] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.680140] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.680145] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 24.680151] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 24.680160] cfg80211: Calling CRDA for country: US
[ 24.804214] b43-phy0: Broadcom 4318 WLAN found
[ 24.873098] phy0: Selected rate control algorithm 'pid'
[ 24.959314] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 25.883950] lp: driver loaded but no devices found
[ 26.222600] Adding 2441840k swap on /dev/sda5. Priority:-1 extents:1 across:2441840k
[ 26.789572] EXT3 FS on sda1, internal journal
[ 27.870402] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.606984] ACPI: WMI: Mapper loaded
[ 29.768505] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 29.833114] apm: BIOS not found.
[ 29.973833] ppdev: user-space parallel port driver
[ 33.267540] Bluetooth: Core ver 2.13
[ 33.268402] NET: Registered protocol family 31
[ 33.268408] Bluetooth: HCI device and connection manager initialized
[ 33.268414] Bluetooth: HCI socket layer initialized
[ 33.281351] Bluetooth: L2CAP ver 2.11
[ 33.281358] Bluetooth: L2CAP socket layer initialized
[ 33.292983] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.292990] Bluetooth: SCO socket layer initialized
[ 33.301629] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.301636] Bluetooth: BNEP filters: protocol multicast
[ 33.321730] Bridge firewalling registered
[ 33.321970] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 33.415322] Bluetooth: RFCOMM socket layer initialized
[ 33.415346] Bluetooth: RFCOMM TTY layer initialized
[ 33.415351] Bluetooth: RFCOMM ver 1.10
[ 35.239659] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 35.427507] [drm] Initialized drm 1.1.0 20060810
[ 35.448118] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 35.573703] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 35.573736] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 35.573792] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 35.867014] [drm] Setting GART location based on new memory map
[ 35.867033] [drm] Loading R300 Microcode
[ 35.867077] [drm] Num pipes: 1
[ 35.867086] [drm] writeback test succeeded in 1 usecs
[ 37.956285] input: b43-phy0 as /devices/virtual/input/input10
[ 38.045048] firmware: requesting b43/ucode5.fw
[ 38.073173] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 38.073190] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 38.118682] input: b43-phy0 as /devices/virtual/input/input11
[ 38.204059] firmware: requesting b43/ucode5.fw
[ 38.206925] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 38.206941] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 38.282154] NET: Registered protocol family 17
[ 39.478415] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 39.478422] tg3: eth0: Flow control is off for TX and off for RX.
[ 3452.524624] [drm] Num pipes: 1
[ 3681.129909] [drm] Num pipes: 1
[ 6069.831646] nautilus[11181]: segfault at b1000018 ip b7787c46 sp bfe9efb0 error 4 in libgconf-2.so.4.1.5[b7767000+2e000]
[ 6410.406319] input: b43-phy0 as /devices/virtual/input/input12
[ 6410.465056] firmware: requesting b43/ucode5.fw
[ 6410.475993] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 6410.476010] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 6450.742757] input: b43-phy0 as /devices/virtual/input/input13
[ 6450.820626] firmware: requesting b43/ucode5.fw
[ 6450.834633] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 6450.834650] b43-phy0 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 6458.848263] tg3: eth0: Link is down.
[ 6586.504258] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 6586.504266] tg3: eth0: Flow control is off for TX and off for RX.
[ 7809.418064] pccard: card ejected from slot 0
[ 7809.470620] b43-pci-bridge 0000:03:00.0: PCI INT A disabled
[ 7815.556029] pccard: CardBus card inserted into slot 0
[ 7815.556065] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, 1fff]
[ 7815.556732] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
[ 7815.556744] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7815.556758] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 7815.616394] b43-phy1: Broadcom 4318 WLAN found
[ 7815.686593] phy1: Selected rate control algorithm 'pid'
[ 7815.688223] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 7817.585747] pccard: card ejected from slot 0
[ 7817.634742] b43-pci-bridge 0000:03:00.0: PCI INT A disabled
[ 7821.392030] pccard: CardBus card inserted into slot 0
[ 7821.392064] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, 1fff]
[ 7821.392740] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
[ 7821.392757] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7821.392776] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 7821.453396] b43-phy2: Broadcom 4318 WLAN found
[ 7821.522641] phy2: Selected rate control algorithm 'pid'
[ 7821.524935] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 7825.572094] input: b43-phy2 as /devices/virtual/input/input14
[ 7825.673089] firmware: requesting b43/ucode5.fw
[ 7825.680606] b43-phy2 ERROR: Firmware file "b43/ucode5.fw" not found
[ 7825.680626] b43-phy2 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 7825.756681] input: b43-phy2 as /devices/virtual/input/input15
[ 7825.853840] firmware: requesting b43/ucode5.fw
[ 7825.884983] b43-phy2 ERROR: Firmware file "b43/ucode5.fw" not found
[ 7825.885001] b43-phy2 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 8569.581758] pccard: card ejected from slot 0
[ 8569.647904] b43-pci-bridge 0000:03:00.0: PCI INT A disabled
[ 8672.057041] pccard: CardBus card inserted into slot 0
[ 8672.057082] PCI: 0000:03:00.0 reg 10 32bit mmio: [0, 1fff]
[ 8672.057854] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
[ 8672.057874] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8672.057893] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 8672.129395] b43-phy3: Broadcom 4318 WLAN found
[ 8672.203569] phy3: Selected rate control algorithm 'pid'
[ 8672.204893] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 8676.252098] input: b43-phy3 as /devices/virtual/input/input16
[ 8676.356042] firmware: requesting b43/ucode5.fw
[ 8676.359055] b43-phy3 ERROR: Firmware file "b43/ucode5.fw" not found
[ 8676.359072] b43-phy3 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 8676.400390] input: b43-phy3 as /devices/virtual/input/input17
[ 8676.456065] firmware: requesting b43/ucode5.fw
[ 8676.460872] b43-phy3 ERROR: Firmware file "b43/ucode5.fw" not found
[ 8676.460884] b43-phy3 ERROR: You must go to b43 - Linux Wireless and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[11170.911284] tg3: eth0: Link is down.
[11172.633386] tg3: eth0: Link is up at 100 Mbps, full duplex.
[11172.633400] tg3: eth0: Flow control is off for TX and off for RX.
[11173.427209] tg3: eth0: Link is down.
[11183.055492] tg3: eth0: Link is up at 100 Mbps, full duplex.
[11183.055501] tg3: eth0: Flow control is off for TX and off for RX.
[13638.608769] gnome-video-thu[18057]: segfault at 8 ip b7f51214 sp bff9723c error 4 in libxine.so.1.24.0[b7f16000+4a000]

[dreamcaster_22]

output for firmware install:

dreamscape@Magi ~/broadcom-wl-4.150.10.5/driver $ sudo ../../b43-fwcutter-011/b43-fwcutter -w /lib/firmware wl_apsta_mimo.o
[sudo] password for dreamscape:
This file is recognised as:
ID : FW13
filename : wl_apsta_mimo.o
version : 410.2160
MD5 : cb8d70972b885b1f8883b943c0261a3c
Extracting b43/pcm5.fw
Extracting b43/pcm4.fw
Extracting b43/ucode15.fw
Extracting b43/ucode14.fw
Extracting b43/ucode13.fw
Extracting b43/ucode11.fw
Extracting b43/ucode9.fw
Extracting b43/ucode5.fw
Extracting b43/ucode4.fw
Extracting b43/lp0bsinitvals15.fw
Extracting b43/lp0initvals15.fw
Extracting b43/lp0bsinitvals14.fw
Extracting b43/lp0initvals14.fw
Extracting b43/a0g1bsinitvals13.fw
Extracting b43/a0g1initvals13.fw
Extracting b43/b0g0bsinitvals13.fw
Extracting b43/b0g0initvals13.fw
Extracting b43/lp0bsinitvals13.fw
Extracting b43/lp0initvals13.fw
Extracting b43/n0absinitvals11.fw
Extracting b43/n0bsinitvals11.fw
Extracting b43/n0initvals11.fw
Extracting b43/a0g1bsinitvals9.fw
Extracting b43/a0g0bsinitvals9.fw
Extracting b43/a0g1initvals9.fw
Extracting b43/a0g0initvals9.fw
Extracting b43/b0g0bsinitvals9.fw
Extracting b43/b0g0initvals9.fw
Extracting b43/a0g1bsinitvals5.fw
Extracting b43/a0g0bsinitvals5.fw
Extracting b43/a0g1initvals5.fw
Extracting b43/a0g0initvals5.fw
Extracting b43/b0g0bsinitvals5.fw
Extracting b43/b0g0initvals5.fw
Extracting b43/a0g0bsinitvals4.fw
Extracting b43/a0g0initvals4.fw
Extracting b43/b0g0bsinitvals4.fw
Extracting b43/b0g0initvals4.fw