USB Wifi Help?

[xXxBlender3DxXx]

I followed one of the tutorials listed on this forum (by waterhead I think), and I just wanted to see if this was what it meant.

I have been trying to get this USB thing working for weeks now. This is a clean installation of Ubuntu 8.10, so I can't mess up here (I hope).

I have a D-Link DWA-120 Wireless USB Adapter and a Windows XP driver for it. Here are my input/outputs for the commands listed on waterhead's thread.

When I put these things into Terminal, I go these results:

Input:

sudo lsusb

Output:

Bus 002 Device 006: ID 0bda:0111 Realtek Semiconductor Corp. Card Reader
Bus 002 Device 004: ID 07d1:3a0d D-Link System DWA-120 Wireless 108G Adapter
Bus 002 Device 002: ID 0d49:7350 Maxtor 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0566:3002 Monterey International Corp. 
Bus 001 Device 003: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Input:

sudo lsmod

Output:

Module                  Size  Used by
	ipv6                  314312  10 
	binfmt_misc            18700  1 
	sco                    20612  2 
	bridge                 64544  0 
	stp                    11268  1 bridge
	bnep                   23168  2 
	rfcomm                 51104  0 
	l2cap                  33280  6 bnep,rfcomm
	bluetooth              70820  6 sco,bnep,rfcomm,l2cap
	ppdev                  16904  0 
	powernow_k8            23684  1 
	cpufreq_stats          14468  0 
	cpufreq_conservative   16392  0 
	cpufreq_powersave      10368  0 
	cpufreq_userspace      12420  0 
	cpufreq_ondemand       16400  1 
	freq_table             13568  3 powernow_k8,cpufreq_stats,cpufreq_ondemand
	container              12288  0 
	video                  28948  0 
	output                 11776  1 video
	sbs     	       22288  0 
	sbshc                  14592  1 sbs
	pci_slot               13704  0 
	wmi                    15808  0 
	battery                21128  0 
	iptable_filter         11520  0 
	ip_tables              28176  1 iptable_filter
	x_tables               31752  1 ip_tables
	ac                     13448  0 
	sbp2                   32652  0 
	parport_pc             44200  0 
	lp                     19588  0 
	parport                50096  3 ppdev,parport_pc,lp
	psmouse                51612  0 
	serio_raw              14596  0 
	pcspkr                 11136  0 
	snd_hda_intel         489264  3 
	k8temp                 13568  0 
	snd_pcm_oss            52608  0 
	snd_mixer_oss          25088  1 snd_pcm_oss
	snd_pcm                99208  2 snd_hda_intel,snd_pcm_oss
	snd_seq_dummy          11524  0 
	snd_seq_oss            42368  0 
	snd_seq_midi           15872  0 
	snd_rawmidi            34176  1 snd_seq_midi
	snd_seq_midi_event     16768  2 snd_seq_oss,snd_seq_midi
	shpchp                 42140  0 
	pci_hotplug            39472  1 shpchp
	snd_seq                67168  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
	snd_timer              34320  2 snd_pcm,snd_seq
	snd_seq_device         16404  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
	snd                    79432  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
	soundcore              16800  1 snd
	snd_page_alloc         17680  2 snd_hda_intel,snd_pcm
	evdev                  20512  8 
	button                 15904  0 
	i2c_nforce2            15752  0 
	i2c_core               36128  1 i2c_nforce2
	ext3                  150544  1 
	jbd                    66472  1 ext3
	mbcache                17924  1 ext3
	loop                   26380  2 
	usbhid                 39776  0 
	hid                    59072  1 usbhid
	sr_mod                 24644  0 
	cdrom                  47784  1 sr_mod
	sd_mod                 45864  5 
	crc_t10dif             10240  1 sd_mod
	sg                     45408  0 
	ata_generic            14212  0 
	usb_storage            92864  1 
	libusual               31784  1 usb_storage
	pata_amd               22020  0 
	sata_nv                35208  2 
	pata_acpi              13568  0 
	libata                200160  4 ata_generic,pata_amd,sata_nv,pata_acpi
	scsi_mod              183160  6 sbp2,sr_mod,sd_mod,sg,usb_storage,libata
	ehci_hcd               48908  0 
	ohci_hcd               34972  0 
	ohci1394               41524  0 
	dock                   18464  1 libata
	forcedeth              68112  0 
	ieee1394              110592  2 sbp2,ohci1394
	usbcore               175376  6 usbhid,usb_storage,libusual,ehci_hcd,ohci_hcd
	thermal                27424  0 
	processor              47800  2 powernow_k8,thermal
	fan                    13576  0 
	fbcon                  51200  0 
	tileblit               11264  1 fbcon
	font                   17152  1 fbcon
	bitblit                14592  1 fbcon
	softcursor             10496  1 bitblit
	fuse                   68288  9

Input:

sudo dmesg

Output:

[    0.448280]   domain 1: span 0-1 level NODE
[    0.448282]    groups: 0-1
[    0.448369] net_namespace: 1552 bytes
[    0.448369] Booting paravirtualized kernel on bare hardware
[    0.448371] Time: 17:39:52  Date: 02/24/09
[    0.448413] NET: Registered protocol family 16
[    0.448438] node 0 link 0: io port [8000, ffff]
[    0.448438] TOM: 00000000c0000000 aka 3072M
[    0.448438] node 0 link 0: mmio [a0000, bffff]
[    0.448438] node 0 link 0: mmio [c0000000, efffffff]
[    0.448438] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.448438] node 0 link 0: mmio [f0000000, f03fffff]
[    0.448438] bus: [00,04] on node 0 link 0
[    0.448438] bus: 00 index 0 io port: [0, ffff]
[    0.448438] bus: 00 index 1 mmio: [a0000, bffff]
[    0.448438] bus: 00 index 2 mmio: [c0000000, f3ffffff]
[    0.448438] bus: 00 index 3 mmio: [f4000000, fcffffffff]
[    0.448438] ACPI: bus type pci registered
[    0.448438] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.448438] PCI: MCFG area at f0000000 reserved in E820
[    0.452208] PCI: Using MMCONFIG at f0000000 - f3ffffff
[    0.452210] PCI: Using configuration type 1 for base access
[    0.452837] ACPI: EC: Look up EC in DSDT
[    0.462161] ACPI: Interpreter enabled
[    0.462164] ACPI: (supports S0 S1 S3 S4 S5)
[    0.462180] ACPI: Using IOAPIC for interrupt routing
[    0.472219] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.472219] PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f]
[    0.472219] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
[    0.472219] PCI: 0000:00:01.1 reg 24 io port: [f400, f43f]
[    0.472219] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.472219] pci 0000:00:01.1: PME# disabled
[    0.472257] PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
[    0.472275] pci 0000:00:02.0: supports D1
[    0.472276] pci 0000:00:02.0: supports D2
[    0.472278] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472280] pci 0000:00:02.0: PME# disabled
[    0.472298] PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
[    0.472319] pci 0000:00:02.1: supports D1
[    0.472320] pci 0000:00:02.1: supports D2
[    0.472322] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472325] pci 0000:00:02.1: PME# disabled
[    0.472370] PCI: 0000:00:05.0 reg 10 32bit mmio: [fe024000, fe027fff]
[    0.472390] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.472393] pci 0000:00:05.0: PME# disabled
[    0.472419] PCI: 0000:00:06.0 reg 20 io port: [f000, f00f]
[    0.472447] PCI: 0000:00:07.0 reg 10 32bit mmio: [fe02d000, fe02dfff]
[    0.472450] PCI: 0000:00:07.0 reg 14 io port: [ec00, ec07]
[    0.472465] pci 0000:00:07.0: supports D1
[    0.472467] pci 0000:00:07.0: supports D2
[    0.472468] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472472] pci 0000:00:07.0: PME# disabled
[    0.472486] PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7]
[    0.472489] PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3]
[    0.472492] PCI: 0000:00:08.0 reg 18 io port: [970, 977]
[    0.472495] PCI: 0000:00:08.0 reg 1c io port: [b70, b73]
[    0.472498] PCI: 0000:00:08.0 reg 20 io port: [d800, d80f]
[    0.472501] PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
[    0.472522] PCI: 0000:00:08.1 reg 10 io port: [9e0, 9e7]
[    0.472525] PCI: 0000:00:08.1 reg 14 io port: [be0, be3]
[    0.472528] PCI: 0000:00:08.1 reg 18 io port: [960, 967]
[    0.472531] PCI: 0000:00:08.1 reg 1c io port: [b60, b63]
[    0.472534] PCI: 0000:00:08.1 reg 20 io port: [c400, c40f]
[    0.472537] PCI: 0000:00:08.1 reg 24 32bit mmio: [fe02b000, fe02bfff]
[    0.472569] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472571] pci 0000:00:09.0: PME# disabled
[    0.472596] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472598] pci 0000:00:0b.0: PME# disabled
[    0.472618] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472620] pci 0000:00:0c.0: PME# disabled
[    0.472631] PCI: 0000:00:0d.0 reg 10 32bit mmio: [fb000000, fbffffff]
[    0.472634] PCI: 0000:00:0d.0 reg 14 32bit mmio: [e0000000, efffffff]
[    0.472640] PCI: 0000:00:0d.0 reg 1c 64bit mmio: [fc000000, fcffffff]
[    0.472644] PCI: 0000:00:0d.0 reg 30 32bit mmio: [0, 1ffff]
[    0.472734] PCI: 0000:01:05.0 reg 10 32bit mmio: [fd8e0000, fd8effff]
[    0.472738] PCI: 0000:01:05.0 reg 14 io port: [bc00, bc07]
[    0.472762] pci 0000:01:05.0: PME# supported from D3hot D3cold
[    0.472765] pci 0000:01:05.0: PME# disabled
[    0.472788] PCI: 0000:01:09.0 reg 10 32bit mmio: [fd8ff000, fd8ff7ff]
[    0.472793] PCI: 0000:01:09.0 reg 14 io port: [b800, b87f]
[    0.472819] pci 0000:01:09.0: supports D2
[    0.472820] pci 0000:01:09.0: PME# supported from D2 D3hot D3cold
[    0.472824] pci 0000:01:09.0: PME# disabled
[    0.472843] pci 0000:00:04.0: transparent bridge
[    0.472846] PCI: bridge 0000:00:04.0 io port: [b000, bfff]
[    0.472848] PCI: bridge 0000:00:04.0 32bit mmio: [fd800000, fd8fffff]
[    0.472851] PCI: bridge 0000:00:04.0 32bit mmio pref: [fdf00000, fdffffff]
[    0.472883] PCI: bridge 0000:00:09.0 io port: [a000, afff]
[    0.472885] PCI: bridge 0000:00:09.0 32bit mmio: [fde00000, fdefffff]
[    0.472888] PCI: bridge 0000:00:09.0 64bit mmio pref: [fdd00000, fddfffff]
[    0.472919] PCI: bridge 0000:00:0b.0 io port: [9000, 9fff]
[    0.472922] PCI: bridge 0000:00:0b.0 32bit mmio: [fdc00000, fdcfffff]
[    0.472924] PCI: bridge 0000:00:0b.0 64bit mmio pref: [fdb00000, fdbfffff]
[    0.472956] PCI: bridge 0000:00:0c.0 io port: [8000, 8fff]
[    0.472958] PCI: bridge 0000:00:0c.0 32bit mmio: [fda00000, fdafffff]
[    0.472961] PCI: bridge 0000:00:0c.0 64bit mmio pref: [fd900000, fd9fffff]
[    0.472974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.473338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.524112] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[    0.524301] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.524489] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.524679] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[    0.524865] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.525053] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.525240] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.525427] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.525622] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[    0.525811] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.526001] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.526191] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.526381] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.526568] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.526758] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[    0.526946] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.527134] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.527324] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.527515] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[    0.527760] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.527997] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.528248] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.528484] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.528718] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.528955] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.529196] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.529432] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.529668] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[    0.529904] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.530140] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.530378] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.530615] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.530856] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.531100] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.531338] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.531575] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.531813] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.532059] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.532160] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.532171] pnp: PnP ACPI init
[    0.532171] ACPI: bus type pnp registered
[    0.537335] pnp: PnP ACPI: found 10 devices
[    0.537335] ACPI: ACPI bus type pnp unregistered
[    0.537335] PCI: Using ACPI for IRQ routing
[    0.564040] NET: Registered protocol family 8
[    0.564042] NET: Registered protocol family 20
[    0.564060] NetLabel: Initializing
[    0.564060] NetLabel:  domain hash size = 128
[    0.564061] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.564076] NetLabel:  unlabeled traffic allowed by default
[    0.564127] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.564129] hpet0: 3 32-bit timers, 25000000 Hz
[    0.566424] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[    0.566426]    actual entries 65586
[    0.566567] AppArmor: AppArmor Filesystem Enabled
[    0.566594] ACPI: RTC can wake from S4
[    0.568046] Switched to high resolution mode on CPU 0
[    0.568195] Switched to high resolution mode on CPU 1
[    0.580036] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.580039] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.580041] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.580043] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.580046] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.580048] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.580050] system 00:01: ioport range 0x2000-0x207f has been reserved
[    0.580053] system 00:01: ioport range 0x2080-0x20ff has been reserved
[    0.580057] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
[    0.580059] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
[    0.580062] system 00:01: iomem range 0xb8000000-0xbfffffff could not be reserved
[    0.580069] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.580072] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.580074] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.580082] system 00:08: iomem range 0xf0000000-0xf3ffffff could not be reserved
[    0.580089] system 00:09: iomem range 0xf0000-0xfffff could not be reserved
[    0.580091] system 00:09: iomem range 0xfeff0000-0xfeff00ff could not be reserved
[    0.580093] system 00:09: iomem range 0xb7ee0000-0xb7efffff could not be reserved
[    0.580096] system 00:09: iomem range 0xffff0000-0xffffffff could not be reserved
[    0.580098] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[    0.580100] system 00:09: iomem range 0x100000-0xb7edffff could not be reserved
[    0.580103] system 00:09: iomem range 0xb7f00000-0xbfefffff could not be reserved
[    0.580105] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.580108] system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.580110] system 00:09: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.580113] system 00:09: iomem range 0xfff80000-0xfff80fff could not be reserved
[    0.580115] system 00:09: iomem range 0xfff90000-0xfffbffff could not be reserved
[    0.580117] system 00:09: iomem range 0xfffed000-0xfffeffff could not be reserved
[    0.585516] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[    0.585519] pci 0000:00:04.0:   IO window: 0xb000-0xbfff
[    0.585523] pci 0000:00:04.0:   MEM window: 0xfd800000-0xfd8fffff
[    0.585526] pci 0000:00:04.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[    0.585530] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[    0.585532] pci 0000:00:09.0:   IO window: 0xa000-0xafff
[    0.585534] pci 0000:00:09.0:   MEM window: 0xfde00000-0xfdefffff
[    0.585537] pci 0000:00:09.0:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[    0.585540] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[    0.585542] pci 0000:00:0b.0:   IO window: 0x9000-0x9fff
[    0.585544] pci 0000:00:0b.0:   MEM window: 0xfdc00000-0xfdcfffff
[    0.585546] pci 0000:00:0b.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[    0.585549] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[    0.585551] pci 0000:00:0c.0:   IO window: 0x8000-0x8fff
[    0.585554] pci 0000:00:0c.0:   MEM window: 0xfda00000-0xfdafffff
[    0.585556] pci 0000:00:0c.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[    0.585566] pci 0000:00:04.0: setting latency timer to 64
[    0.585571] pci 0000:00:09.0: setting latency timer to 64
[    0.585575] pci 0000:00:0b.0: setting latency timer to 64
[    0.585579] pci 0000:00:0c.0: setting latency timer to 64
[    0.585582] bus: 00 index 0 io port: [0, ffff]
[    0.585584] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.585585] bus: 01 index 0 io port: [b000, bfff]
[    0.585587] bus: 01 index 1 mmio: [fd800000, fd8fffff]
[    0.585588] bus: 01 index 2 mmio: [fdf00000, fdffffff]
[    0.585590] bus: 01 index 3 io port: [0, ffff]
[    0.585592] bus: 01 index 4 mmio: [0, ffffffffffffffff]
[    0.585593] bus: 02 index 0 io port: [a000, afff]
[    0.585595] bus: 02 index 1 mmio: [fde00000, fdefffff]
[    0.585597] bus: 02 index 2 mmio: [fdd00000, fddfffff]
[    0.585598] bus: 02 index 3 mmio: [0, 0]
[    0.585600] bus: 03 index 0 io port: [9000, 9fff]
[    0.585601] bus: 03 index 1 mmio: [fdc00000, fdcfffff]
[    0.585603] bus: 03 index 2 mmio: [fdb00000, fdbfffff]
[    0.585604] bus: 03 index 3 mmio: [0, 0]
[    0.585606] bus: 04 index 0 io port: [8000, 8fff]
[    0.585607] bus: 04 index 1 mmio: [fda00000, fdafffff]
[    0.585609] bus: 04 index 2 mmio: [fd900000, fd9fffff]
[    0.585611] bus: 04 index 3 mmio: [0, 0]
[    0.585626] NET: Registered protocol family 2
[    0.624175] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.626167] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.633106] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.633953] TCP: Hash tables configured (established 524288 bind 65536)
[    0.633957] TCP reno registered
[    0.644118] NET: Registered protocol family 1
[    0.644238] checking if image is initramfs... it is
[    1.404798] Freeing initrd memory: 8694k freed
[    1.413470] audit: initializing netlink socket (disabled)
[    1.413484] type=2000 audit(1235497192.412:1): initialized
[    1.418540] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.421724] VFS: Disk quotas dquot_6.5.1
[    1.421830] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.421952] msgmni has been set to 5778
[    1.422101] io scheduler noop registered
[    1.422102] io scheduler anticipatory registered
[    1.422104] io scheduler deadline registered
[    1.422255] io scheduler cfq registered (default)
[    1.422286] pci 0000:00:00.0: Enabling HT MSI Mapping
[    1.436053] pci 0000:00:04.0: Enabling HT MSI Mapping
[    1.436068] pci 0000:00:05.0: Enabling HT MSI Mapping
[    1.436094] pci 0000:00:07.0: Enabling HT MSI Mapping
[    1.436107] pci 0000:00:08.0: Enabling HT MSI Mapping
[    1.436121] pci 0000:00:08.1: Enabling HT MSI Mapping
[    1.436135] pci 0000:00:09.0: Enabling HT MSI Mapping
[    1.436149] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    1.436163] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    1.436176] pci 0000:00:0d.0: Boot video device
[    1.436296] pcieport-driver 0000:00:09.0: setting latency timer to 64
[    1.436315] pcieport-driver 0000:00:09.0: found MSI capability
[    1.436338] pci_express 0000:00:09.0:pcie00: allocate port service
[    1.436399] pci_express 0000:00:09.0:pcie03: allocate port service
[    1.436479] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[    1.436497] pcieport-driver 0000:00:0b.0: found MSI capability
[    1.436511] pci_express 0000:00:0b.0:pcie00: allocate port service
[    1.436571] pci_express 0000:00:0b.0:pcie03: allocate port service
[    1.436651] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    1.436668] pcieport-driver 0000:00:0c.0: found MSI capability
[    1.436682] pci_express 0000:00:0c.0:pcie00: allocate port service
[    1.436737] pci_express 0000:00:0c.0:pcie03: allocate port service
[    1.480380] hpet_resources: 0xfeff0000 is busy
[    1.480467] Linux agpgart interface v0.103
[    1.480471] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.482966] brd: module loaded
[    1.483041] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.483242] PNP: No PS/2 controller found. Probing ports directly.
[    1.483674] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.483683] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.505293] mice: PS/2 mouse device common for all mice
[    1.505459] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.505495] rtc0: alarms up to one year, y3k, hpet irqs
[    1.505550] cpuidle: using governor ladder
[    1.505552] cpuidle: using governor menu
[    1.505928] TCP cubic registered
[    1.506183] registered taskstats version 1
[    1.506312]   Magic number: 13:713:694
[    1.506481] rtc_cmos 00:05: setting system clock to 2009-02-24 17:39:53 UTC (1235497193)
[    1.506484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.506486] EDD information not available.
[    1.506530] Freeing unused kernel memory: 536k freed
[    1.506816] Write protecting the kernel read-only data: 4348k
[    1.646340] fuse init (API version 7.9)
[    1.682598] fan PNP0C0B:00: registered as cooling_device0
[    1.682605] ACPI: Fan [FAN] (on)
[    1.708269] processor ACPI0007:00: registered as cooling_device1
[    1.708355] processor ACPI0007:01: registered as cooling_device2
[    1.710812] thermal LNXTHERM:01: registered as thermal_zone0
[    1.711175] ACPI: Thermal Zone [THRM] (40 C)
[    2.156231] usbcore: registered new interface driver usbfs
[    2.156269] usbcore: registered new interface driver hub
[    2.164870] usbcore: registered new device driver usb
[    2.177199] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    2.177716] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    2.177729] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    2.177734] forcedeth 0000:00:07.0: setting latency timer to 64
[    2.181098] No dock devices found.
[    2.187375] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.203300] SCSI subsystem initialized
[    2.228521] libata version 3.00 loaded.
[    2.696818] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:21:d7:ae:33
[    2.696823] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[    2.697549] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    2.697564] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[    2.697581] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    2.697584] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    2.697661] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.697691] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[    2.754197] usb usb1: configuration #1 chosen from 1 choice
[    2.754226] hub 1-0:1.0: USB hub found
[    2.754236] hub 1-0:1.0: 10 ports detected
[    2.961770] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    2.961786] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    2.961805] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    2.961809] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    2.961874] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[    2.961911] ehci_hcd 0000:00:02.1: debug port 1
[    2.961915] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    2.961938] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[    3.136023] usb 1-2: new full speed USB device using ohci_hcd and address 2
[    3.148019] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.148705] usb usb2: configuration #1 chosen from 1 choice
[    3.148741] hub 2-0:1.0: USB hub found
[    3.148750] hub 2-0:1.0: 10 ports detected
[    3.204030] hub 1-0:1.0: unable to enumerate USB device on port 2
[    3.357667] pata_acpi 0000:00:06.0: setting latency timer to 64
[    3.359614] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[    3.359626] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[    3.359650] pata_acpi 0000:00:08.0: setting latency timer to 64
[    3.359657] pata_acpi 0000:00:08.0: PCI INT A disabled
[    3.360085] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    3.360088] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    3.360108] pata_acpi 0000:00:08.1: setting latency timer to 64
[    3.360114] pata_acpi 0000:00:08.1: PCI INT B disabled
[    3.360670] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    3.360677] ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    3.360682] ohci1394 0000:01:09.0: setting latency timer to 64
[    3.412726] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fd8ff000-fd8ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.424551] sata_nv 0000:00:08.0: version 3.5
[    3.424576] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[    3.424644] sata_nv 0000:00:08.0: setting latency timer to 64
[    3.424752] scsi0 : sata_nv
[    3.425681] scsi1 : sata_nv
[    3.425917] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
[    3.425919] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
[    3.892039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.900120] ata1.00: ATA-7: ST3320820AS, 3.AHG, max UDMA/100
[    3.900122] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.917625] ata1.00: configured for UDMA/100
[    4.001030] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    4.133803] usb 2-2: configuration #1 chosen from 1 choice
[    4.228066] isa bounce pool size: 16 pages
[    4.228156] scsi 0:0:0:0: Direct-Access     ATA      ST3320820AS      3.AH PQ: 0 ANSI: 5
[    4.228296] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    4.228357] sata_nv 0000:00:08.1: setting latency timer to 64
[    4.228435] scsi2 : sata_nv
[    4.228506] scsi3 : sata_nv
[    4.228709] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
[    4.228712] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
[    4.304021] usb 2-5: new high speed USB device using ehci_hcd and address 4
[    4.437699] usb 2-5: configuration #1 chosen from 1 choice
[    4.604020] usb 2-9: new high speed USB device using ehci_hcd and address 6
[    4.689229] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ffbae48a]
[    4.753853] usb 2-9: configuration #1 chosen from 1 choice
[    4.762441] usbcore: registered new interface driver libusual
[    4.767915] Initializing USB Mass Storage driver...
[    4.852182] pata_amd 0000:00:06.0: version 0.3.10
[    4.852235] pata_amd 0000:00:06.0: setting latency timer to 64
[    4.852343] scsi4 : pata_amd
[    4.853323] scsi5 : pata_amd
[    4.854207] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    4.854210] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    5.017385] ata5.00: ATAPI: HL-DT-STDVDRRW GSA-H20L, S853, max UDMA/33
[    5.017398] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    5.032316] ata5.00: configured for UDMA/33
[    5.032368] ata6: port disabled. ignoring.
[    5.034045] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRRW GSA-H20L  S853 PQ: 0 ANSI: 5
[    5.048213] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    5.048250] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[    5.061041] usb 1-4: new low speed USB device using ohci_hcd and address 3
[    5.067763] Driver 'sd' needs updating - please use bus_type methods
[    5.067905] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    5.067925] sd 0:0:0:0: [sda] Write Protect is off
[    5.067927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.067961] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.068062] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[    5.068079] sd 0:0:0:0: [sda] Write Protect is off
[    5.068081] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.068113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.068117]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    5.088123]  sda1 sda2 < sda5 >
[    5.109460] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.121665] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.121672] Uniform CD-ROM driver Revision: 3.20
[    5.121814] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    5.273195] usb 1-4: configuration #1 chosen from 1 choice
[    5.584022] usb 1-7: new low speed USB device using ohci_hcd and address 4
[    5.790884] usb 1-7: configuration #1 chosen from 1 choice
[    5.800303] scsi6 : SCSI emulation for USB Mass Storage devices
[    5.800486] usb-storage: device found at 2
[    5.800488] usb-storage: waiting for device to settle before scanning
[    5.800527] scsi7 : SCSI emulation for USB Mass Storage devices
[    5.800628] usbcore: registered new interface driver usb-storage
[    5.800631] USB Mass Storage support registered.
[    5.800816] usbcore: registered new interface driver hiddev
[    5.800873] usb-storage: device found at 6
[    5.800874] usb-storage: waiting for device to settle before scanning
[    5.806451] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input1
[    5.832196] input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:02.0-4
[    5.839394] input: HID 0566:3002 as /devices/pci0000:00/0000:00:02.0/usb1/1-7/1-7:1.0/input/input2
[    5.864142] input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:02.0-7
[    5.880129] input: HID 0566:3002 as /devices/pci0000:00/0000:00:02.0/usb1/1-7/1-7:1.1/input/input3
[    5.897183] input,hiddev96,hidraw2: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:02.0-7
[    5.897206] usbcore: registered new interface driver usbhid
[    5.897209] usbhid: v2.6:USB HID core driver
[    6.139127] loop: module loaded
[    6.182268] kjournald starting.  Commit interval 5 seconds
[    6.182285] EXT3-fs: mounted filesystem with ordered data mode.
[   10.800331] usb-storage: device scan complete
[   10.805113] usb-storage: device scan complete
[   10.805506] scsi 6:0:0:0: Direct-Access     Maxtor   OneTouch         0125 PQ: 0 ANSI: 4
[   10.806484] sd 6:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[   10.807108] sd 6:0:0:0: [sdb] Write Protect is off
[   10.807110] sd 6:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[   10.807112] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   10.807733] sd 6:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[   10.808358] sd 6:0:0:0: [sdb] Write Protect is off
[   10.808360] sd 6:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[   10.808361] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   10.808365]  sdb:<5>scsi 7:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[   10.818121] scsi 7:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[   10.824762] scsi 7:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   10.831493] scsi 7:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[   10.963867]  sdb1
[   10.963990] sd 6:0:0:0: [sdb] Attached SCSI disk
[   10.964123] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   10.965212] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   10.965336] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   10.966282] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[   10.966327] sd 7:0:0:1: Attached scsi generic sg4 type 0
[   10.967299] sd 7:0:0:2: [sde] Attached SCSI removable disk
[   10.967348] sd 7:0:0:2: Attached scsi generic sg5 type 0
[   10.968310] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[   10.968359] sd 7:0:0:3: Attached scsi generic sg6 type 0
[   11.493599] udevd version 124 started
[   11.747913] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   11.747935] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[   11.826543] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   11.860050] ACPI: Power Button (FF) [PWRF]
[   11.860201] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   11.892040] ACPI: Power Button (CM) [PWRB]
[   12.971659] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.996629] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.325454] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   13.325460] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   13.325483] HDA Intel 0000:00:05.0: setting latency timer to 64
[   13.338953] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   13.358915] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   15.597901] lp: driver loaded but no devices found
[   16.353382] EXT3 FS on loop0, internal journal
[   25.915372] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:976552k
[   26.080342] type=1505 audit(1235515217.698:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4560
[   26.240246] type=1505 audit(1235515217.858:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4565
[   26.240518] type=1505 audit(1235515217.858:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4565
[   26.401575] ip_tables: (C) 2000-2006 Netfilter Core Team
[   26.865867] ACPI: WMI: Mapper loaded
[   27.261228] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[   27.262763] powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0xc
[   27.262767] powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xe
[   27.262769] powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x10
[   27.262771] powernow-k8:    3 : fid 0xa (1800 MHz), vid 0x10
[   27.262772] powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
[   27.858883] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   27.989626] ppdev: user-space parallel port driver
[   29.284466] Bluetooth: Core ver 2.13
[   29.285342] NET: Registered protocol family 31
[   29.285347] Bluetooth: HCI device and connection manager initialized
[   29.285351] Bluetooth: HCI socket layer initialized
[   29.298577] Bluetooth: L2CAP ver 2.11
[   29.298585] Bluetooth: L2CAP socket layer initialized
[   29.326046] Bluetooth: RFCOMM socket layer initialized
[   29.326075] Bluetooth: RFCOMM TTY layer initialized
[   29.326077] Bluetooth: RFCOMM ver 1.10
[   29.329661] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.329669] Bluetooth: BNEP filters: protocol multicast
[   29.366827] Bridge firewalling registered
[   29.367850] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   29.381269] Bluetooth: SCO (Voice Link) ver 0.6
[   29.381276] Bluetooth: SCO socket layer initialized
[   30.000025] Clocksource tsc unstable (delta = -123212283 ns)
[   33.453442] eth0: no link during initialization.
[  120.511509] type=1503 audit(1235515312.126:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6016/net/" pid=6016 profile="/usr/sbin/cupsd"
[  120.605305] NET: Registered protocol family 10
[  120.606860] lo: Disabled Privacy Extensions
[  120.607941] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  120.609299] type=1503 audit(1235515312.227:6): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609317] type=1503 audit(1235515312.227:7): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609330] type=1503 audit(1235515312.227:8): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609342] type=1503 audit(1235515312.227:9): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609354] type=1503 audit(1235515312.227:10): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609367] type=1503 audit(1235515312.227:11): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609381] type=1503 audit(1235515312.227:12): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609393] type=1503 audit(1235515312.227:13): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=6016 profile="/usr/sbin/cupsd"
[  120.609522] type=1503 audit(1235515312.227:14): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/6016/net/dev" pid=6016 profile="/usr/sbin/cupsd"

Input:

sudo uname -r

Output:

2.6.27-7-generic

Any more info needed?

I've used "ndswrapper" with no luck whatsoever...

(Links to tutorials gladly accepted)


Thanks in advance!

xXxBlender3DxXx

[D-cat]

Debian User Forums :: View topic - D-Link DWA 120 wireless usb adapter : No Solution Provided.

The best I can tell this stick only works, maybe, with the NDIS Wrapper. It's buggy at best.

[kr0nik]

edit the /etc/networkmanager/nm-system-setting.conf to say
[ipupdown]
managed=true (change from false to true)

[xXxBlender3DxXx]

You mean that it has a large possibility to not work?

*sigh*

Is there anything that I can do?

[kr0nik]

posted this one else where, maybe it could help you
update with: sudo update-manager -d
install ndiswrapper. Find the native windows drivers for your wireless card. in my case i had to use netgears wn311t. When they were extracted i would get netmw14x.inf (the driver).
find out what the device number is (forget what its called exatly) but it will be ####:#### (it will have letters) so do a "lspci -nn" minus the quotes.
it will show a list of stuff with network devices and such, Find your wireless adaptor and on the line with it it will have something like:
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91)

Im not booted into linux so im ssh'd into my shell. but your wireless card will show something like that. note down the numbers nad letters inside the [####:####]

"sudo ndiswrapper -i driver.inf" (/etc/ndiswrapper will create a folder named "netmw14x" inside it. make sure you are in the directory with the driver file. and dont forget the .inf part).

"sudo ndiswrapper -a 11ab:2a08 netmw14x" (lspci -nn will show device ids. with different versions of ndiswrapper it might be -d. but do sudo ndiswrapper -a or -d depending on your version. "ndiswrapper -a ####:#### driver" notice the driver on this one doesnt have the .inf part )

"sudo ndiswrapper -l" will now say the device is present and it can be configured normally.

after that you'll want to edit your network manager so you can use it with the wireless adaptor. so do

sudo gedit /etc/NetworkManager/nm-system-settings.conf
under [ifupdown], change managed=true

after youll want to add your alias with ndiswrapper so

"sudo ndiswrapper -m"

next youll want to make the module dependencies (its like a makefile) so do:

"sudo depmod -a"

and then youll want to load the modules so it will work:

"sudo modprobe ndiswrapper"

and then

"sudo ifup wlan0"


an overview of commands

1. sudo apt-get install ndiswrapper-common
2. sudo ndiswrapper -i driver.inf
3. lspci -nn (note down the device id)
4. sudo ndiswrapper -a ####:#### driver
5. sudo ndiswrapper -m
6. sudo gedit /etc/NetworkManager/nm-system-settings.conf (change managed to true)
7. sudo depmod -a
8. sudo modprobe ndiswrapper
9. sudo ifup wlan0

and your wireless should show up in the network manager

[edit] atleast thats all waht worked for me. i tried for months to get wireless to work and it wouldnt. the only thing i didnt do was change the managed to true which made it work. an easier way to install the driver though is using ndisgtk so you dont have to go through all the hassle of running commands. as it says ndisgtk gimp toolkit so its for x instead of a command line.

[asangawick]

I'm using Ubuntu 8.10 with kernel "linux 2.6.27-14-generic" with GNOME 2.24.1.

• I installed ndiswrapper using the Synaptic package manager ( ndiswrapper-commons, ndiswrapper-utils, ndisgtk).
  
• I downloaded the driver form the D-link web
  
• Driver comes as a zip file. Extracted the file
  
• Installed the driver using the .inf file in Drivers/WinXP_2K directory.

With these few steps, my wireless dongle is up and running for Ubuntu.

Im using ASUS A6F notebook with inel core-duo prosessor

I hope this will give u a clue.

[hanski]

[*]I downloaded the driver form the D-link web

I cannot find the driver for linux (Ubuntu 9.04) on D-Link web pages. Could you provide a link to the correct page, please?