Find the answer to your Linux question:
Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 34
Hmm, the code tags should work. The only things that should trigger the URL restriction are http www @...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651

    Hmm, the code tags should work. The only things that should trigger the URL restriction are

    http
    www
    @

  2. #12
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    debug-1 (1 of 4)

    Here is "debug-1.txt" , 1 of 4 files.

  3. #13
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    debug-1 (1 of 4) (try again)

    Here is one of four, again.
    Attached Files Attached Files

  4. $spacer_open
    $spacer_close
  5. #14
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    debug-2 (2 of 4)

    Here is file 2 of 4.
    Attached Files Attached Files

  6. #15
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    debug-3 (3 of 4)

    Here is file 3 of 4.
    Attached Files Attached Files

  7. #16
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    debug-4 (4 of 4)

    And, the final piece.
    Attached Files Attached Files

  8. #17
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
    This is your network card, and it is supported by both the b43 drivers and the broadcom proprietary wl driver.

    Looking at your modules, both are apparently installed and loading. I didn't notice ndiswrapper in there, so that's good for us now actually. The b43 requires you to download extra firmware to work, so let's see if it will work with the wl.

    Open a terminal and type
    Code:
    sudo modprobe -r b43
    sudo modprobe -r wl
    sudo modprobe wl
    sudo depmod -a
    sudo /etc/init.d/network restart
    Hopefully, your network will now be working. If not, we'll want lsmod again dmesg again, and maybe to try the b43 instead. Note that I believe the wireless will be listed as eth1 using the wl driver, not wlan0.

    If this works, you'll want to blacklist the b43 driver so it doesn't load and interfere.

    Hit ALT+F2 and type gksudo gedit /etc/modprobe.d/blacklist

    This will open a file in your text editor. Add
    blacklist b43
    to the file, save and close.

    EDIT: You might need to restart networkmanager as well.
    Code:
    sudo /etc/init.d/NetworkManager restart
    I think Ubuntu capitalizes networkmanager like that. You can try without capitals if that doesn't work.

    EDIT again: It might be /etc/init.d/networking, not network at the end of the first bit, sorry.

  9. #18
    Just Joined!
    Join Date
    May 2009
    Posts
    23
    Ok, I have to swap out my hard drives and reboot so it might take a little while.

  10. #19
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    file 1 of 5

    Here is one of 5. I got an error on the last command.
    Attached Files Attached Files

  11. #20
    Just Joined!
    Join Date
    May 2009
    Posts
    23

    file 2 of 5

    File 2 of 5
    Attached Files Attached Files

Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •