Wireless quit working

[nochids]

Please help. I am relatively new to Linux sys admin tasks that I am having to constantly do to keep my laptop running. I have Lenovo 3000 N200. Ubuntu 8.04. It was working fine, until about 2 weeks ago I started it and it can see wireless networks but cannot connect to any of them. I have tried to manually configure it, I have tried anything and everything I have read on the net but nothing seems to fix it. I would appreciate any ideas. Thanks.

lspci: Network Controller :Intel Corp PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
Ethernet controller: Broadcom Corp NetLink BCM5906M Fast Ethernet PCI Express (rev 02)

What other info do you need?

[Hal343]

Did you try Anton Kholov's firmware update here?
https://answers.launchpad.net/ubuntu/+question/16768
Besides that one, one response was to disable and re-enable wireless through Network Manager, which worked for that particular user.

[nochids]

It did work with the liveCD, so the hardware is good. I tried the steps from Antons firmware update but without success. I tried another couple of things I read - the "sudo apt-get install b43-fwcutter" but it also did not solve it, and someone suggested removing the "~/.gnome2/keyring/default.keyring" thinking it should recreate the file, but it has not created the file again so I may have screwed up the system beyond repair. This is really frustrating and keeping me from working on stuff that I need to be working on. If you have any other ideas on how to fix this I would be very grateful. I am hoping I don't have to do a reinstall.

[reed9]

b43-fwcutter is only to to install firmware for certain broadcom wireless cards. It won't help you with the Intel 4965.

Please post the output of the following commands.

lspci -knn
lsmod
iwconfig
ifconfig
dmesg

[reed9]

Hmm, just rereading your post. What kind of security are these wireless networks using? WPA, WEP? Have you tried connecting to an unsecured network? Have you checked that the password hasn't been changed on your router? Are you able to connect to your network from other machines?

[nochids]

Hi, thanks for replying. Here is the info you requested... wow... lots of stuff there!! I am using WPA TKIP security. No, I am unable to connect to ANY wireless network. Yes, I am still connected wirelessly to my own router with other computers so the password has not changed. Like I said, it was working fine, then the next day I booted up and it would not connect. I don't think anything has changed. I have been reading boards and trying different "fixes" ever since. It was last working on 8/1/09. I dont think I did any system updates, and nothing else has changed. I am near the point of returning to Windoze - God forbid!!

the command you asked me to run did not work as shown below:

 lspci -knn
lspci: invalid option -- k
Usage: lspci [<switches>]

-v		Be verbose
-n		Show numeric ID's
-nn		Show both textual and numeric ID's (names & numbers)
-b		Bus-centric view (PCI addresses and IRQ's instead of those seen by the CPU)
-x		Show hex-dump of the standard portion of config space
-xxx		Show hex-dump of the whole config space (dangerous; root only)
-xxxx		Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]	Show only devices in selected slots
-d [<vendor>]:[<device>]	Show only selected devices
-t		Show bus tree
-m		Produce machine-readable output
-i <file>	Use specified ID database instead of /usr/share/misc/pci.ids.gz
-D		Always show domain numbers
-M		Enable `bus mapping' mode (dangerous; root only)
-P <dir>	Use specified directory instead of /proc/bus/pci
-H <mode>	Use direct hardware access (<mode> = 1 or 2)
-F <file>	Read configuration data from given file
-G		Enable PCI access debugging

**********************

 lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection [8086:4230] (rev 61)
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
08:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
08:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
08:06.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a)
08:06.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05)
08:06.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)

************************************************** ******************************

 lsmod
Module                  Size  Used by
af_packet              23812  2 
binfmt_misc            12808  1 
rfcomm                 41744  6 
l2cap                  25728  13 rfcomm
ipv6                  268036  19 
ppdev                  10372  0 
acpi_cpufreq           10796  2 
cpufreq_ondemand        9740  1 
cpufreq_stats           7104  0 
cpufreq_powersave       2688  0 
freq_table              5536  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace       5284  0 
cpufreq_conservative     8712  0 
dock                   11280  0 
container               5632  0 
sbs                    15112  0 
sbshc                   7680  1 sbs
iptable_filter          3840  0 
ip_tables              14820  1 iptable_filter
x_tables               16132  1 ip_tables
arc4                    2944  2 
ecb                     4480  2 
blkcipher               8324  1 ecb
sbp2                   24072  0 
parport_pc             36260  0 
lp                     12324  0 
parport                37832  3 ppdev,parport_pc,lp
joydev                 13120  0 
snd_hda_intel         346136  1 
snd_pcm_oss            42144  0 
uvcvideo               58116  0 
snd_mixer_oss          17920  1 snd_pcm_oss
compat_ioctl32          2304  1 uvcvideo
snd_pcm                78596  2 snd_hda_intel,snd_pcm_oss
videodev               29440  1 uvcvideo
snd_page_alloc         11400  2 snd_hda_intel,snd_pcm
snd_hwdep              10500  1 snd_hda_intel
iwl4965               105844  0 
hci_usb                16540  2 
v4l1_compat            15492  2 uvcvideo,videodev
v4l2_common            18304  2 uvcvideo,videodev
snd_seq_dummy           4868  0 
iwlwifi_mac80211      219108  1 iwl4965
nvidia               7825536  36 
bluetooth              61028  7 rfcomm,l2cap,hci_usb
snd_seq_oss            35584  0 
snd_seq_midi            9376  0 
cfg80211               15112  1 iwlwifi_mac80211
snd_rawmidi            25760  1 snd_seq_midi
snd_seq_midi_event      8320  2 snd_seq_oss,snd_seq_midi
i2c_core               24832  1 nvidia
snd_seq                54224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
battery                14212  0 
snd_timer              24836  2 snd_pcm,snd_seq
snd_seq_device          9612  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
serio_raw               7940  0 
sdhci                  19076  0 
snd                    56996  13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
wmi_acer                9644  0 
mmc_core               51460  1 sdhci
video                  19856  8 
output                  4736  1 video
ricoh_mmc               4352  0 
pcspkr                  4224  0 
ac                      6916  0 
intel_agp              25492  0 
button                  9232  0 
iTCO_wdt               13092  0 
iTCO_vendor_support     4868  1 iTCO_wdt
soundcore               8800  1 snd
agpgart                34760  2 nvidia,intel_agp
evdev                  13056  7 
shpchp                 34452  0 
pci_hotplug            30880  1 shpchp
psmouse                40336  0 
ext3                  136968  1 
jbd                    48404  1 ext3
mbcache                 9600  1 ext3
sg                     36880  0 
sr_mod                 17956  0 
cdrom                  37408  1 sr_mod
sd_mod                 30720  3 
pata_acpi               8320  0 
ata_generic             8324  0 
ahci                   28548  2 
ata_piix               19588  0 
libata                159728  4 pata_acpi,ata_generic,ahci,ata_piix
ohci1394               33584  0 
scsi_mod              151692  5 sbp2,sg,sr_mod,sd_mod,libata
ieee1394               93752  2 sbp2,ohci1394
tg3                   116228  0 
ehci_hcd               37900  0 
uhci_hcd               27024  0 
usbcore               146412  5 uvcvideo,hci_usb,ehci_hcd,uhci_hcd
thermal                16796  0 
processor              36616  4 acpi_cpufreq,thermal
fan                     5636  0 
fbcon                  42912  0 
tileblit                3584  1 fbcon
font                    9472  1 fbcon
bitblit                 6784  1 fbcon
softcursor              3072  1 bitblit
fuse                   50708  1

************************************************** *****************************

 iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11g  ESSID:""  Nickname:""
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated   
          Tx-Power=27 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2346 B   
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

************************************************** *****************************

 ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1b:38:08:a6:0f  
          inet addr:192.168.2.103  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:38ff:fe08:a60f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3191 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2721888 (2.5 MB)  TX bytes:558886 (545.7 KB)
          Interrupt:19 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:394 errors:0 dropped:0 overruns:0 frame:0
          TX packets:394 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:21284 (20.7 KB)  TX bytes:21284 (20.7 KB)

wlan0     Link encap:Ethernet  HWaddr 00:13:e8:92:41:fb  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wmaster0  Link encap:UNSPEC  HWaddr 00-13-E8-92-41-FB-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

************************************************** **********************************

 dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Jul 24 22:46:06 UTC 2009 (Ubuntu 2.6.24-24.57-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[    0.000000]  BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f72c0
[    0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   523984
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   523984
[    0.000000] On node 0 totalpages: 523984
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 292307 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7240 checksum 0
[    0.000000] ACPI: RSDP 000F7240, 0024 (r2 LENOVO)
[    0.000000] ACPI: XSDT 7FED87D5, 008C (r1 LENOVO TP-68     6040000  LTP        0)
[    0.000000] ACPI: FACP 7FEDFBD2, 00F4 (r3 TOSCPL CRESTLNE  6040000 ALAN        1)
[    0.000000] ACPI: DSDT 7FED9B6A, 5FF4 (r2 TOSCPL CRESTLNE  6040000 INTL 20060608)
[    0.000000] ACPI: FACS 7FEE2FC0, 0040
[    0.000000] ACPI: APIC 7FEDFCC6, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
[    0.000000] ACPI: HPET 7FEDFD2E, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
[    0.000000] ACPI: MCFG 7FEDFD66, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
[    0.000000] ACPI: TCPA 7FEDFDA2, 0032 (r1 Intel  CRESTLNE  6040000 LOHR       5A)
[    0.000000] ACPI: TMOR 7FEDFDD4, 0026 (r1 PTLTD            6040000 PTL         3)
[    0.000000] ACPI: SLIC 7FEDFDFA, 0176 (r1 LENOVO TP-68     6040000 TBD         1)
[    0.000000] ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SSDT 7FED98BD, 02AD (r1 SataRe SataAhci     1000 INTL 20050624)
[    0.000000] ACPI: SSDT 7FED8DED, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
[    0.000000] ACPI: SSDT 7FED8D47, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
[    0.000000] ACPI: SSDT 7FED8861, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[    0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519891
[    0.000000] Kernel command line: root=UUID=3d03d8e6-c84e-4176-a07a-7dc665172330 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2193.550 MHz processor.
[   18.638053] Console: colour VGA+ 80x25
[   18.638055] console [tty0] enabled
[   18.638664] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   18.639229] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   18.790405] Memory: 2065940k/2095936k available (2181k kernel code, 28720k reserved, 1006k data, 368k init, 1178432k highmem)
[   18.790428] virtual kernel memory layout:
[   18.790429]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   18.790430]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   18.790430]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   18.790431]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   18.790432]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
[   18.790433]       .data : 0xc0321538 - 0xc041cdc4   (1006 kB)
[   18.790434]       .text : 0xc0100000 - 0xc0321538   (2181 kB)
[   18.790436] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   18.790498] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   18.790628] hpet clockevent registered
[   18.870528] Calibrating delay using timer specific routine.. 4395.00 BogoMIPS (lpj=8790004)
[   18.870559] Security Framework initialized
[   18.870580] SELinux:  Disabled at boot.
[   18.870589] AppArmor: AppArmor initialized
[   18.870592] Failure registering capabilities with primary security module.
[   18.870614] Mount-cache hash table entries: 512
[   18.870802] Initializing cgroup subsys ns
[   18.870805] Initializing cgroup subsys cpuacct
[   18.870813] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
[   18.870836] monitor/mwait feature present.
[   18.870837] using mwait in idle threads.
[   18.870840] CPU: L1 I cache: 32K, L1 D cache: 32K
[   18.870842] CPU: L2 cache: 4096K
[   18.870843] CPU: Physical Processor ID: 0
[   18.870844] CPU: Processor Core ID: 0
[   18.870865] CPU: After all inits, caps: bfebfbff 20000000 00000000 00043940 0000e3bd 00000000 00000001 00000001
[   18.870872] Compat vDSO mapped to ffffe000.
[   18.870898] Checking 'hlt' instruction... OK.
[   18.887170] SMP alternatives: switching to UP code
[   18.889860] Early unpacking initramfs... done
[   19.429588] ACPI: Core revision 20070126
[   19.429656] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   19.440921] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
[   19.440977] SMP alternatives: switching to SMP code
[   19.442260] Booting processor 1/1 eip 3000
[   19.452662] Initializing CPU#1
[   19.529655] Calibrating delay using timer specific routine.. 4389.07 BogoMIPS (lpj=8778149)
[   19.529660] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
[   19.529682] monitor/mwait feature present.
[   19.529685] CPU: L1 I cache: 32K, L1 D cache: 32K
[   19.529686] CPU: L2 cache: 4096K
[   19.529688] CPU: Physical Processor ID: 0
[   19.529689] CPU: Processor Core ID: 1
[   19.529692] CPU: After all inits, caps: bfebfbff 20000000 00000000 00043940 0000e3bd 00000000 00000001 00000001
[   19.530604] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
[   19.530640] Total of 2 processors activated (8784.07 BogoMIPS).
[   19.531022] ENABLING IO-APIC IRQs
[   19.531311] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   19.677658] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   19.697642] Brought up 2 CPUs
[   19.697696] CPU0 attaching sched-domain:
[   19.697698]  domain 0: span 03
[   19.697700]   groups: 01 02
[   19.697702] CPU1 attaching sched-domain:
[   19.697703]  domain 0: span 03
[   19.697705]   groups: 02 01
[   19.698089] net_namespace: 64 bytes
[   19.698113] Booting paravirtualized kernel on bare hardware
[   19.698939] Time: 18:21:25  Date: 08/25/09
[   19.698978] NET: Registered protocol family 16
[   19.699297] EISA bus registered
[   19.699318] ACPI: bus type pci registered
[   19.700385] PCI: PCI BIOS revision 3.00 entry at 0xfde11, last bus=8
[   19.700387] PCI: Using configuration type 1
[   19.700413] Setting up standard PCI resources
[   19.705259] ACPI: EC: Look up EC in DSDT
[   19.720818] ACPI: BIOS _OSI(Linux) query ignored
[   19.720821] ACPI: DMI System Vendor: LENOVO
[   19.720823] ACPI: DMI Product Name: 0769A9U
[   19.720824] ACPI: DMI Product Version: 3000 N200                       
[   19.720843] ACPI: DMI Board Name: IEL10
[   19.720844] ACPI: DMI BIOS Vendor: LENOVO
[   19.720845] ACPI: DMI BIOS Date: 06/01/2007
[   19.720846] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[   19.720848] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[   19.722203] ACPI: Interpreter enabled
[   19.722207] ACPI: (supports S0 S3 S4 S5)
[   19.722239] ACPI: Using IOAPIC for interrupt routing
[   19.723326] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   19.810343] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[   19.810345] ACPI: EC: driver started in interrupt mode
[   19.810409] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   19.812493] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   19.812515] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   19.815891] PCI: Transparent bridge - 0000:00:1e.0
[   19.816011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   19.816555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[   19.816804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   19.817031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   19.817257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   19.817504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[   19.817763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   19.839124] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[   19.839316] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   19.839504] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[   19.839692] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   19.839881] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   19.840051] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   19.840238] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   19.840428] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   19.840703] Linux Plug and Play Support v0.97 (c) Adam Belay
[   19.840744] pnp: PnP ACPI init
[   19.840767] ACPI: bus type pnp registered
[   19.861692] pnp: PnP ACPI: found 10 devices
[   19.861694] ACPI: ACPI bus type pnp unregistered
[   19.861696] PnPBIOS: Disabled by ACPI PNP
[   19.862071] PCI: Using ACPI for IRQ routing
[   19.862073] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   20.072864] NET: Registered protocol family 8
[   20.072866] NET: Registered protocol family 20
[   20.072893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   20.072897] hpet0: 3 64-bit timers, 14318180 Hz
[   20.073927] AppArmor: AppArmor Filesystem Enabled
[   20.076852] Time: tsc clocksource has been installed.
[   20.076865] Switched to high resolution mode on CPU 0
[   20.077057] Switched to high resolution mode on CPU 1
[   20.092791] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   20.092794] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[   20.092796] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[   20.092798] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[   20.092800] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   20.092803] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   20.092805] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[   20.092807] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   20.092814] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[   20.092820] system 00:06: ioport range 0x680-0x69f has been reserved
[   20.092822] system 00:06: ioport range 0x800-0x80f has been reserved
[   20.092824] system 00:06: ioport range 0x1000-0x107f has been reserved
[   20.092826] system 00:06: ioport range 0x1180-0x11bf has been reserved
[   20.092829] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[   20.092831] system 00:06: ioport range 0xff00-0xff7f has been reserved
[   20.123147] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
[   20.123148] PCI: Bridge: 0000:00:01.0
[   20.123150]   IO window: disabled.
[   20.123152]   MEM window: c9000000-caffffff
[   20.123155]   PREFETCH window: d0000000-dfffffff
[   20.123158] PCI: Bridge: 0000:00:1c.0
[   20.123161]   IO window: 2000-2fff
[   20.123166]   MEM window: f6000000-f7ffffff
[   20.123170]   PREFETCH window: f0000000-f1ffffff
[   20.123176] PCI: Bridge: 0000:00:1c.1
[   20.123178]   IO window: 3000-3fff
[   20.123183]   MEM window: f8000000-f9ffffff
[   20.123187]   PREFETCH window: f2000000-f3ffffff
[   20.123193] PCI: Bridge: 0000:00:1c.2
[   20.123195]   IO window: 4000-4fff
[   20.123201]   MEM window: fa000000-fbffffff
[   20.123205]   PREFETCH window: f4000000-f5ffffff
[   20.123210] PCI: Bridge: 0000:00:1c.3
[   20.123212]   IO window: 5000-5fff
[   20.123218]   MEM window: c6000000-c7ffffff
[   20.123222]   PREFETCH window: cc000000-cdffffff
[   20.123228] PCI: Bridge: 0000:00:1e.0
[   20.123229]   IO window: disabled.
[   20.123234]   MEM window: fc000000-fc0fffff
[   20.123238]   PREFETCH window: disabled.
[   20.123257] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   20.123261] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   20.123285] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   20.123290] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   20.123314] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[   20.123318] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   20.123342] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   20.123347] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   20.123370] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[   20.123375] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   20.123389] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   20.123398] NET: Registered protocol family 2
[   20.160686] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.160857] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   20.161170] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   20.161315] TCP: Hash tables configured (established 131072 bind 65536)
[   20.161317] TCP reno registered
[   20.172717] checking if image is initramfs... it is
[   20.685567] Freeing initrd memory: 7330k freed
[   20.685694] Simple Boot Flag at 0x36 set to 0x1
[   20.686176] audit: initializing netlink socket (disabled)
[   20.686188] audit(1251224485.741:1): initialized
[   20.686362] highmem bounce pool size: 64 pages
[   20.687845] VFS: Disk quotas dquot_6.5.1
[   20.687900] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.688006] io scheduler noop registered
[   20.688008] io scheduler anticipatory registered
[   20.688009] io scheduler deadline registered
[   20.688017] io scheduler cfq registered (default)
[   20.688151] Boot video device is 0000:01:00.0
[   20.688235] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   20.688268] assign_interrupt_mode Found MSI capability
[   20.688295] Allocate Port Service[0000:00:01.0:pcie00]
[   20.688320] Allocate Port Service[0000:00:01.0:pcie02]
[   20.688385] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   20.688443] assign_interrupt_mode Found MSI capability
[   20.688488] Allocate Port Service[0000:00:1c.0:pcie00]
[   20.688511] Allocate Port Service[0000:00:1c.0:pcie02]
[   20.688602] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   20.688659] assign_interrupt_mode Found MSI capability
[   20.688705] Allocate Port Service[0000:00:1c.1:pcie00]
[   20.688728] Allocate Port Service[0000:00:1c.1:pcie02]
[   20.688818] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   20.688876] assign_interrupt_mode Found MSI capability
[   20.688921] Allocate Port Service[0000:00:1c.2:pcie00]
[   20.688945] Allocate Port Service[0000:00:1c.2:pcie02]
[   20.689036] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   20.689093] assign_interrupt_mode Found MSI capability
[   20.689138] Allocate Port Service[0000:00:1c.3:pcie00]
[   20.689161] Allocate Port Service[0000:00:1c.3:pcie02]
[   20.689372] isapnp: Scanning for PnP cards...
[   21.043202] isapnp: No Plug & Play device found
[   21.061672] Real Time Clock Driver v1.12ac
[   21.061860] hpet_resources: 0xfed00000 is busy
[   21.061884] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   21.062769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   21.062818] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   21.062891] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   21.090919] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.090922] serio: i8042 AUX port at 0x60,0x64 irq 12
[   21.118965] mice: PS/2 mouse device common for all mice
[   21.119045] EISA: Probing bus 0 at eisa.0
[   21.119050] Cannot allocate resource for EISA slot 1
[   21.119053] Cannot allocate resource for EISA slot 2
[   21.119054] Cannot allocate resource for EISA slot 3
[   21.119056] Cannot allocate resource for EISA slot 4
[   21.119057] Cannot allocate resource for EISA slot 5
[   21.119070] EISA: Detected 0 cards.
[   21.119073] cpuidle: using governor ladder
[   21.119074] cpuidle: using governor menu
[   21.119136] NET: Registered protocol family 1
[   21.119157] Using IPI No-Shortcut mode
[   21.119186] registered taskstats version 1
[   21.119281]   Magic number: 5:623:393
[   21.119326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   21.119327] EDD information not available.
[   21.119502] Freeing unused kernel memory: 368k freed
[   21.119521] Write protecting the kernel read-only data: 802k
[   21.135470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   22.278214] fuse init (API version 7.9)
[   22.294495] ACPI: SSDT 7FED957B, 027A (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[   22.294679] ACPI: SSDT 7FED904C, 04AA (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[   22.296735] Monitor-Mwait will be used to enter C-1 state
[   22.296738] Monitor-Mwait will be used to enter C-2 state
[   22.296740] Monitor-Mwait will be used to enter C-3 state
[   22.296905] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   22.296910] ACPI: Processor [CPU0] (supports 8 throttling states)
[   22.297112] ACPI: SSDT 7FED97F5, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[   22.297281] ACPI: SSDT 7FED94F6, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[   22.298537] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   22.298544] ACPI: Processor [CPU1] (supports 8 throttling states)
[   22.412986] usbcore: registered new interface driver usbfs
[   22.413005] usbcore: registered new interface driver hub
[   22.413255] usbcore: registered new device driver usb
[   22.414324] USB Universal Host Controller Interface driver v3.0
[   22.414364] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   22.414373] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   22.414377] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   22.414553] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   22.414585] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[   22.414678] usb usb1: configuration #1 chosen from 1 choice
[   22.414695] hub 1-0:1.0: USB hub found
[   22.414699] hub 1-0:1.0: 2 ports detected
[   22.516631] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[   22.516659] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   22.516663] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   22.516717] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   22.516762] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[   22.516976] usb usb2: configuration #1 chosen from 1 choice
[   22.517012] hub 2-0:1.0: USB hub found
[   22.517016] hub 2-0:1.0: 2 ports detected
[   22.620373] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[   22.620399] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   22.620403] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   22.620457] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   22.620521] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840
[   22.620716] usb usb3: configuration #1 chosen from 1 choice
[   22.620752] hub 3-0:1.0: USB hub found
[   22.620756] hub 3-0:1.0: 2 ports detected
[   22.724189] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   22.724200] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   22.724222] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   22.724258] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   22.724328] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[   22.724549] usb usb4: configuration #1 chosen from 1 choice
[   22.724603] hub 4-0:1.0: USB hub found
[   22.724607] hub 4-0:1.0: 2 ports detected
[   22.764084] SCSI subsystem initialized
[   22.818497] libata version 3.00 loaded.
[   22.827991] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   22.828019] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   22.828023] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   22.828060] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[   22.828123] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[   22.828340] usb usb5: configuration #1 chosen from 1 choice
[   22.828376] hub 5-0:1.0: USB hub found
[   22.828398] hub 5-0:1.0: 2 ports detected
[   22.859763] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   22.931922] ACPI: PCI Interrupt 0000:08:06.0[A] -> GSI 22 (level, low) -> IRQ 22
[   22.931926] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   22.931956] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   22.931959] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   22.932889] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[   22.936859] ehci_hcd 0000:00:1a.7: debug port 1
[   22.936865] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   22.936869] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304800
[   22.983540] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   22.983758] usb usb6: configuration #1 chosen from 1 choice
[   22.983794] hub 6-0:1.0: USB hub found
[   22.983798] hub 6-0:1.0: 4 ports detected
[   22.984880] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc000000-fc0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   23.087574] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[   23.087602] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   23.087606] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   23.087665] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[   23.091596] ehci_hcd 0000:00:1d.7: debug port 1
[   23.091602] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   23.091625] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc304c00
[   23.107351] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   23.107516] usb usb7: configuration #1 chosen from 1 choice
[   23.107569] hub 7-0:1.0: USB hub found
[   23.107573] hub 7-0:1.0: 6 ports detected
[   23.211469] tg3.c:v3.86 (November 9, 2007)
[   23.211564] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[   23.211596] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   23.378858] usb 2-1: device not accepting address 2, error -71
[   23.552082] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1b:38:08:a6:0f
[   23.552087] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[   23.552089] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   23.552208] ata_piix 0000:00:1f.1: version 2.12
[   23.552242] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[   23.552310] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   23.552464] scsi0 : ata_piix
[   23.553326] scsi1 : ata_piix
[   23.554257] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[   23.554259] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[   23.875498] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850, RB41, max UDMA/33
[   23.937807] Clocksource tsc unstable (delta = -7177274074 ns)
[   23.941911] Time: hpet clocksource has been installed.
[   23.953745] ata1.00: configured for UDMA/33
[   23.966298] usb 6-4: new high speed USB device using ehci_hcd and address 3
[   24.010303] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850   RB41 PQ: 0 ANSI: 5
[   24.010655] ahci 0000:00:1f.2: version 3.0
[   24.010678] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[   24.053543] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f77ac400fbb]
[   24.106329] usb 6-4: configuration #1 chosen from 1 choice
[   24.277529] usb 2-1: new full speed USB device using uhci_hcd and address 4
[   24.290046] usb 2-1: configuration #1 chosen from 1 choice
[   24.315031] usb 4-2: new full speed USB device using uhci_hcd and address 2
[   24.317370] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[   24.317375] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
[   24.317383] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   24.317616] scsi2 : ahci
[   24.317777] scsi3 : ahci
[   24.317915] scsi4 : ahci
[   24.317980] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 218
[   24.317983] ata4: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 218
[   24.317986] ata5: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304200 irq 218
[   24.332794] usb 4-2: configuration #1 chosen from 1 choice
[   24.412249] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   24.413210] ata3.00: ATA-7: HITACHI HTS541616J9SA00, SB4IC7UP, max UDMA/100
[   24.413215] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   24.414381] ata3.00: configured for UDMA/100
[   24.434928] ata4: SATA link down (SStatus 0 SControl 300)
[   24.456593] ata5: SATA link down (SStatus 0 SControl 300)
[   24.456814] scsi 2:0:0:0: Direct-Access     ATA      HITACHI HTS54161 SB4I PQ: 0 ANSI: 5
[   24.465314] Driver 'sd' needs updating - please use bus_type methods
[   24.467560] Driver 'sr' needs updating - please use bus_type methods
[   24.472877] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   24.472882] Uniform CD-ROM driver Revision: 3.20
[   24.472953] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   24.473366] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   24.473410] sd 2:0:0:0: [sda] Write Protect is off
[   24.473414] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.473481] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.473570] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   24.473599] sd 2:0:0:0: [sda] Write Protect is off
[   24.473601] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.473655] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.473658]  sda: sda1 sda2 < sda5 >
[   24.920210] sd 2:0:0:0: [sda] Attached SCSI disk
[   24.923681] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   24.923696] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   25.087622] Attempting manual resume
[   25.087624] swsusp: Resume From Partition 8:5
[   25.087626] PM: Checking swsusp image.
[   25.087751] PM: Resume from disk failed.
[   25.097472] EXT3-fs: INFO: recovery required on readonly filesystem.
[   25.097476] EXT3-fs: write access will be enabled during recovery.
[   25.773933] kjournald starting.  Commit interval 5 seconds
[   25.773949] EXT3-fs: sda1: orphan cleanup on readonly fs
[   25.773954] ext3_orphan_cleanup: deleting unreferenced inode 7159819
[   25.773971] ext3_orphan_cleanup: deleting unreferenced inode 6930438
[   25.773978] ext3_orphan_cleanup: deleting unreferenced inode 6930437
[   25.773983] ext3_orphan_cleanup: deleting unreferenced inode 6930436
[   25.773988] ext3_orphan_cleanup: deleting unreferenced inode 6930435
[   25.773993] ext3_orphan_cleanup: deleting unreferenced inode 6930434
[   25.773997] EXT3-fs: sda1: 6 orphan inodes deleted
[   25.773999] EXT3-fs: recovery complete.
[   25.788138] EXT3-fs: mounted filesystem with ordered data mode.
[   37.577565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   37.630093] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   37.684515] Linux agpgart interface v0.102
[   37.741271] iTCO_vendor_support: vendor-support=0
[   37.777263] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   37.824227] input: Power Button (FF) as /devices/virtual/input/input2
[   37.888068] ACPI: Power Button (FF) [PWRF]
[   37.888114] input: Lid Switch as /devices/virtual/input/input3
[   37.920078] ACPI: Lid Switch [LID0]
[   37.920126] input: Power Button (CM) as /devices/virtual/input/input4
[   37.926295] ricoh-mmc: Ricoh MMC Controller disabling driver
[   37.926297] ricoh-mmc: Copyright(c) Philip Langdale
[   37.926330] ricoh-mmc: Ricoh MMC controller found at 0000:08:06.2 [1180:0843] (rev 1)
[   37.926340] ricoh-mmc: Controller is now disabled.
[   37.983943] ACPI: Power Button (CM) [PWRB]
[   37.984095] ACPI: AC Adapter [ACAD] (on-line)
[   37.993423] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[   38.047877] sdhci: Secure Digital Host Controller Interface driver
[   38.047880] sdhci: Copyright(c) Pierre Ossman
[   38.047916] sdhci: SDHCI controller found at 0000:08:06.1 [1180:0822] (rev 19)
[   38.047935] ACPI: PCI Interrupt 0000:08:06.1[B] -> GSI 23 (level, low) -> IRQ 21
[   38.047950] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   38.047984] mmc0: SDHCI at 0xfc000800 irq 21 DMA
[   38.054492] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   38.054535] ACPI: WMI-Acer: Mapper loaded
[   38.055233] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[   38.107758] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   38.140068] ACPI: Battery Slot [BAT1] (battery present)
[   38.433980] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04713/0x200000
[   38.530321] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   38.535540] Bluetooth: Core ver 2.11
[   38.557077] nvidia: module license 'NVIDIA' taints kernel.
[   38.560326] NET: Registered protocol family 31
[   38.560329] Bluetooth: HCI device and connection manager initialized
[   38.560333] Bluetooth: HCI socket layer initialized
[   38.809736] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   38.809744] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   38.809849] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   38.852511] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   38.852578] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   38.852614] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   38.864615] Bluetooth: HCI USB driver ver 2.9
[   38.866994] usbcore: registered new interface driver hci_usb
[   38.880340] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[   38.880343] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   38.880414] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   38.880423] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   38.880435] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   38.908677] Linux video capture interface: v2.00
[   38.981823] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[   38.983551] usbcore: registered new interface driver uvcvideo
[   38.983554] USB Video Class driver (v0.1.0)
[   39.003494] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   39.003511] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   39.294933] lp: driver loaded but no devices found
[   39.365984] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
[   39.367430] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[   39.408189] Adding 6072528k swap on /dev/sda5.  Priority:-1 extents:1 across:6072528k
[   39.826463] EXT3 FS on sda1, internal journal
[   40.341920] ip_tables: (C) 2000-2006 Netfilter Core Team
[   40.892847] No dock devices found.
[   42.419665] ppdev: user-space parallel port driver
[   42.734938] audit(1251224518.238:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5326 profile="/usr/sbin/cupsd" namespace="default"
[   44.544771] apm: BIOS not found.
[   45.103650] NET: Registered protocol family 10
[   45.103848] lo: Disabled Privacy Extensions
[   46.905060] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.979877] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   46.979939] Bluetooth: L2CAP ver 2.9
[   46.979944] Bluetooth: L2CAP socket layer initialized
[   47.100753] Bluetooth: RFCOMM socket layer initialized
[   47.100772] Bluetooth: RFCOMM TTY layer initialized
[   47.100776] Bluetooth: RFCOMM ver 1.8
[   47.260645] iwl4965: Error sending REPLY_SCAN_CMD: time out after 500ms.
[   47.260746] iwl4965: TX Power requested while scanning!
[   65.828324] CPU0 attaching NULL sched-domain.
[   65.828337] CPU1 attaching NULL sched-domain.
[   65.831482] CPU0 attaching sched-domain:
[   65.831493]  domain 0: span 03
[   65.831498]   groups: 01 02
[   65.831505] CPU1 attaching sched-domain:
[   65.831508]  domain 0: span 03
[   65.831512]   groups: 02 01
[  109.649415] tg3: eth0: Link is up at 100 Mbps, full duplex.
[  109.649424] tg3: eth0: Flow control is on for TX and on for RX.
[  109.654431] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  110.301508] NET: Registered protocol family 17
[  115.385335] eth0: no IPv6 routers present

Hope this is helpful.

Thanks.

[reed9]

First, code tags are your friend. Makes reading stuff easier.

I'm guessing this is the key:

[ 47.260645] iwl4965: Error sending REPLY_SCAN_CMD: time out after 500ms.
[ 47.260746] iwl4965: TX Power requested while scanning!

Try this

sudo ifconfig wlan0 down
echo "options iwl4965 disable_hw_scan=1" | sudo tee -a /etc/modprobe.d/iwlagn.conf
sudo modprobe -r iwl4965
sudo modprobe iwl4965
sudo ifconfig wlan0 up

Possibly reboot also.

If it doesn't help, check the output of

dmesg | grep iwl

again and see if those errors are still there.

[nochids]

still not connecting to my router. the output from the dmesg | grep iwl is as follows:

 dmesg | grep iwl
[   36.764113] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[   36.764116] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   36.764218] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   37.733709] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
[   37.734669] wmaster0: Selected rate control algorithm 'iwl-4965-rs'

Also, what about the lack of the .gnome2/keyrings/default.keyring? should I create an empty file for that? has it not created it yet because I have been unable to connect therefore generating the file?

thanks.

[reed9]

You shouldn't need to create the keyring file.

Hmm, the previous errors are gone, so that seems good. I don't know why it isn't connecting now, though.

Are you using wireless n by any chance? The driver only supports a/b/g modes.

A number of people have had troubles with the default networkmanager. You might try replacing it with WICD.

I'll look around and see if I can find more info.

[nochids]

Not using n. This has been working for almost 2 years now, and all of a sudden, something broke and I have tried everything to get it to work again unfortunately with no success. I will tell you that after rebooting it did connect to an unsecured network (with very weak signal) and then I tried to connect to my own and it failed. I don't know if that helps or not.

Is there any way that I can reinstall those components of the OS? or can I have the disk "repair" it? I am just trying to avoid having to copy all the personal files and then also reinstall all the apps I have running, although, if I had done that in the beginning I wouldnt have wasted the last 3+ weeks trying to fix it!!