Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
Hey everyone, So i just updated to ubuntu 9.04, after sometime of living without internet. After updating the wireless connection icon on top doesn't detect any networks. when i click ...
  1. 09-15-2009 #1
    jonathan731
    jonathan731 is offline
    Just Joined!
    Join Date
    Feb 2009
    Posts
    38

    upgrade to 9.04 wireless issues

    Hey everyone,

    So i just updated to ubuntu 9.04, after sometime of living without internet. After updating the wireless connection icon on top doesn't detect any networks. when i click it it says "wireless connection" "device not ready". I've been looking online and nothing seems to fix this issue. Thanks for any help
    Reply With Quote Reply With Quote
  2. 09-15-2009 #2
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    Check this thread and post your results back here, I'm someone will help you out soon.
    http://www.linuxforums.org/forum/wir...tart-here.html
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  3. 09-19-2009 #3
    jonathan731
    jonathan731 is offline
    Just Joined!
    Join Date
    Feb 2009
    Posts
    38
    Im sorry it took a few days to reply. Ive been busy with tests.


    The result to everything is :


    lspci -knn

    Code:
    00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
	Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
	Kernel driver in use: e1000e
	Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
	Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
	Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
	Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
	Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02)
	Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
	Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02)
	Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV610 video device [Radeon HD 2400 PRO] [1002:94c3]
02:01.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

    lsmod
    Code:
    Module                  Size  Used by
nls_iso8859_1          12032  1 
nls_cp437              13696  1 
vfat                   18816  1 
fat                    58272  1 vfat
nls_utf8                9856  0 
hfsplus                80644  0 
usb_storage            82880  1 
wl                   1489748  0 
ieee80211_crypt        13444  1 wl
rfkill_input           12800  0 
binfmt_misc            16776  1 
ppdev                  15620  0 
bridge                 56340  0 
stp                    10500  1 bridge
bnep                   20224  2 
video                  25360  0 
output                 11008  1 video
lp                     17156  0 
parport                42220  2 ppdev,lp
snd_hda_intel         435636  3 
snd_pcm_oss            46336  0 
snd_mixer_oss          22656  1 snd_pcm_oss
snd_pcm                82948  2 snd_hda_intel,snd_pcm_oss
arc4                    9856  2 
snd_seq_dummy          10756  0 
ecb                    10752  2 
snd_seq_oss            37760  0 
snd_seq_midi           14336  0 
snd_rawmidi            29696  1 snd_seq_midi
b43                   131484  0 
snd_seq_midi_event     15104  2 snd_seq_oss,snd_seq_midi
mac80211              217208  1 b43
snd_seq                56880  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
cfg80211               38032  1 mac80211
snd_timer              29704  2 snd_pcm,snd_seq
snd_seq_device         14988  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
led_class              12036  1 b43
intel_agp              34108  0 
agpgart                42696  1 intel_agp
hid_dell               10112  0 
psmouse                61972  0 
pcspkr                 10496  0 
iTCO_wdt               19108  0 
iTCO_vendor_support    11652  1 iTCO_wdt
input_polldev          11912  1 b43
serio_raw              13316  0 
dcdbas                 15264  0 
snd                    62628  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15200  1 snd
snd_page_alloc         16904  2 snd_hda_intel,snd_pcm
usbhid                 42336  1 hid_dell
usblp                  20224  0 
floppy                 64324  0 
ssb                    41220  1 b43
e1000e                121136  0 
fbcon                  46112  0 
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
    dmesg

    Code:
    [    0.000000] BIOS EBDA/lowmem at: 0009e800/0009e800
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[    0.000000]  BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI 2.5 present.
[    0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x100000
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000007000 (usable)
[    0.000000]  modified: 0000000000007000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000091800 (usable)
[    0.000000]  modified: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cfe90000 (usable)
[    0.000000]  modified: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[    0.000000]  modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[    0.000000]  modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 378bc000 - 37fef293
[    0.000000] Allocated new RAMDISK: 00881000 - 00fb4293
[    0.000000] Move RAMDISK from 00000000378bc000 - 0000000037fef292 to 00881000 - 00fb4292
[    0.000000] ACPI: RSDP 000F97A0, 0024 (r2 DELL  )
[    0.000000] ACPI: XSDT CFEE3080, 005C (r1 DELL    FX09    42302E31 AWRD        0)
[    0.000000] ACPI: FACP CFEE7200, 00F4 (r3 DELL    FX09    42302E31 AWRD        0)
[    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
[    0.000000] ACPI: DSDT CFEE3200, 3FFC (r1 DELL   AWRDACPI     1000 MSFT  3000000)
[    0.000000] ACPI: FACS CFE90000, 0040
[    0.000000] ACPI: HPET CFEE73C0, 0038 (r1 DELL    FX09    42302E31 AWRD       98)
[    0.000000] ACPI: MCFG CFEE7400, 003C (r1 DELL    FX09    42302E31 AWRD        0)
[    0.000000] ACPI: SLIC CFEE7440, 0176 (r1 DELL    FX09    42302E31 AWRD        0)
[    0.000000] ACPI: DMY2 CFEE75C0, 0080 (r1 DELL    FX09    42302E31 AWRD        0)
[    0.000000] ACPI: APIC CFEE7300, 0084 (r1 DELL    FX09    42302E31 AWRD        0)
[    0.000000] ACPI: SSDT CFEE7CA0, 0380 (r1  PmRef    CpuPm     3000 INTL 20041203)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2442MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
[    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
[    0.000000]   #5 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000881000 - 0000fb4293]      NEW RAMDISK ==> [0000881000 - 0000fb4293]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00f3f00] 000f3f00
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x000cfe90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x00000007
[    0.000000]     0: 0x00000010 -> 0x00000091
[    0.000000]     0: 0x00000100 -> 0x000cfe90
[    0.000000] On node 0 totalpages: 851476
[    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3940 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4886 pages used for memmap
[    0.000000]   HighMem zone: 620412 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 844822
[    0.000000] Kernel command line: root=UUID=8ea71238-62f2-4d77-96c0-2b98aaa9fcad ro xforcevesa quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 2526.998 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 17032000 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 3345536k/3406400k available (4126k kernel code, 59388k reserved, 2208k data, 532k init, 2501192k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.99 BogoMIPS (lpj=10107992)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] using mwait in idle threads.
[    0.004000] Checking 'hlt' instruction... OK.
[    0.018083] ACPI: Core revision 20080926
[    0.019371] ACPI: Checking initramfs for custom DSDT
[    0.260137] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.299823] CPU0: Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz stepping 06
[    0.300001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5053.88 BogoMIPS (lpj=10107771)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.384589] CPU1: Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz stepping 06
[    0.384601] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.388030] Brought up 2 CPUs
[    0.388032] Total of 2 processors activated (10107.88 BogoMIPS).
[    0.388077] CPU0 attaching sched-domain:
[    0.388078]  domain 0: span 0-1 level MC
[    0.388080]   groups: 0 1
[    0.388085] CPU1 attaching sched-domain:
[    0.388086]  domain 0: span 0-1 level MC
[    0.388088]   groups: 1 0
[    0.388144] net_namespace: 776 bytes
[    0.388144] Booting paravirtualized kernel on bare hardware
[    0.388258] Time: 20:24:33  Date: 09/14/09
[    0.388258] regulator: core version 0.5
[    0.388258] NET: Registered protocol family 16
[    0.388258] EISA bus registered
[    0.388258] ACPI: bus type pci registered
[    0.388258] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.388258] PCI: MCFG area at e0000000 reserved in E820
[    0.388258] PCI: Using MMCONFIG for extended config space
[    0.388258] PCI: Using configuration type 1 for base access
[    0.388840] ACPI: EC: Look up EC in DSDT
[    0.394646] ACPI: Interpreter enabled
[    0.394650] ACPI: (supports S0 S3 S4 S5)
[    0.394665] ACPI: Using IOAPIC for interrupt routing
[    0.397860] ACPI: No dock devices found.
[    0.397869] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.397937] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.397940] pci 0000:00:01.0: PME# disabled
[    0.397992] pci 0000:00:19.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff]
[    0.397998] pci 0000:00:19.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff]
[    0.398003] pci 0000:00:19.0: reg 18 io port: [0xff00-0xff1f]
[    0.398024] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.398027] pci 0000:00:19.0: PME# disabled
[    0.398069] pci 0000:00:1a.0: reg 20 io port: [0xfe00-0xfe1f]
[    0.398121] pci 0000:00:1a.1: reg 20 io port: [0xfd00-0xfd1f]
[    0.398173] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
[    0.398216] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
[    0.398249] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.398252] pci 0000:00:1a.7: PME# disabled
[    0.398283] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
[    0.398307] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.398310] pci 0000:00:1b.0: PME# disabled
[    0.398354] pci 0000:00:1d.0: reg 20 io port: [0xfb00-0xfb1f]
[    0.398406] pci 0000:00:1d.1: reg 20 io port: [0xfa00-0xfa1f]
[    0.398458] pci 0000:00:1d.2: reg 20 io port: [0xf900-0xf91f]
[    0.398501] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff]
[    0.398534] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.398537] pci 0000:00:1d.7: PME# disabled
[    0.398630] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.398633] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.398667] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807]
[    0.398672] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703]
[    0.398676] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607]
[    0.398681] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503]
[    0.398686] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f]
[    0.398690] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f]
[    0.398720] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
[    0.398731] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[    0.398765] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107]
[    0.398770] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003]
[    0.398775] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07]
[    0.398779] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03]
[    0.398784] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f]
[    0.398789] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[    0.398828] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[    0.398836] pci 0000:01:00.0: reg 18 64bit mmio: [0xfddf0000-0xfddfffff]
[    0.398841] pci 0000:01:00.0: reg 20 io port: [0xce00-0xceff]
[    0.398849] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.398855] pci 0000:01:00.0: supports D1 D2
[    0.398889] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[    0.398892] pci 0000:00:01.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[    0.398896] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.398915] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdcfe000-0xfdcfffff]
[    0.398978] pci 0000:00:1e.0: transparent bridge
[    0.398981] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[    0.398984] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[    0.398989] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[    0.398997] bus 00 -> node 0
[    0.399002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.399201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.410909] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.411005] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.411099] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.411193] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.411287] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.411381] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.411475] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.411569] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[    0.411735] ACPI: WMI: Mapper loaded
[    0.411762] SCSI subsystem initialized
[    0.411762] libata version 3.00 loaded.
[    0.411762] usbcore: registered new interface driver usbfs
[    0.411762] usbcore: registered new interface driver hub
[    0.411762] usbcore: registered new device driver usb
[    0.412026] PCI: Using ACPI for IRQ routing
[    0.416011] Bluetooth: Core ver 2.13
[    0.416027] NET: Registered protocol family 31
[    0.416027] Bluetooth: HCI device and connection manager initialized
[    0.416027] Bluetooth: HCI socket layer initialized
[    0.416027] NET: Registered protocol family 8
[    0.416027] NET: Registered protocol family 20
[    0.416038] NetLabel: Initializing
[    0.416040] NetLabel:  domain hash size = 128
[    0.416042] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.416063] NetLabel:  unlabeled traffic allowed by default
[    0.416078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.416089] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.420060] AppArmor: AppArmor Filesystem Enabled
[    0.428009] pnp: PnP ACPI init
[    0.428018] ACPI: bus type pnp registered
[    0.429542] pnp: PnP ACPI: found 12 devices
[    0.429543] ACPI: ACPI bus type pnp unregistered
[    0.429546] PnPBIOS: Disabled by ACPI PNP
[    0.429553] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.429555] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.429557] system 00:01: ioport range 0x290-0x297 has been reserved
[    0.429558] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.429564] system 00:08: ioport range 0x400-0x4bf could not be reserved
[    0.429569] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.429573] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
[    0.429575] system 00:0b: iomem range 0xcff00000-0xcfffffff has been reserved
[    0.429577] system 00:0b: iomem range 0xfed00000-0xfed000ff has been reserved
[    0.429579] system 00:0b: iomem range 0xcfe90000-0xcfefffff could not be reserved
[    0.429581] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.429583] system 00:0b: iomem range 0x100000-0xcfe8ffff could not be reserved
[    0.429585] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.429587] system 00:0b: iomem range 0xfed14000-0xfed1dfff has been reserved
[    0.429589] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
[    0.429591] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.429593] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[    0.429595] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[    0.429597] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[    0.464227] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.464229] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.464232] pci 0000:00:01.0:   MEM window: 0xfdd00000-0xfddfffff
[    0.464235] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.464238] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.464241] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.464245] pci 0000:00:1e.0:   MEM window: 0xfdc00000-0xfdcfffff
[    0.464248] pci 0000:00:1e.0:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
[    0.464258] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.464261] pci 0000:00:01.0: setting latency timer to 64
[    0.464266] pci 0000:00:1e.0: setting latency timer to 64
[    0.464269] bus: 00 index 0 io port: [0x00-0xffff]
[    0.464271] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.464272] bus: 01 index 0 io port: [0xc000-0xcfff]
[    0.464274] bus: 01 index 1 mmio: [0xfdd00000-0xfddfffff]
[    0.464275] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[    0.464277] bus: 01 index 3 mmio: [0x0-0x0]
[    0.464278] bus: 02 index 0 io port: [0xd000-0xdfff]
[    0.464280] bus: 02 index 1 mmio: [0xfdc00000-0xfdcfffff]
[    0.464281] bus: 02 index 2 mmio: [0xfde00000-0xfdefffff]
[    0.464283] bus: 02 index 3 io port: [0x00-0xffff]
[    0.464284] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[    0.464290] NET: Registered protocol family 2
[    0.476059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.476251] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.476502] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.476630] TCP: Hash tables configured (established 131072 bind 65536)
[    0.476632] TCP reno registered
[    0.484077] NET: Registered protocol family 1
[    0.484181] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.504004] Switched to high resolution mode on CPU 0
[    0.713277]  it is
[    0.960487] Freeing initrd memory: 7372k freed
[    0.960646] cpufreq: No nForce2 chipset.
[    0.960751] audit: initializing netlink socket (disabled)
[    0.960769] type=2000 audit(1252959872.960:1): initialized
[    0.966518] highmem bounce pool size: 64 pages
[    0.966522] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.967506] VFS: Disk quotas dquot_6.5.1
[    0.967549] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.967994] fuse init (API version 7.10)
[    0.968055] msgmni has been set to 1665
[    0.968187] alg: No test for stdrng (krng)
[    0.968194] io scheduler noop registered
[    0.968196] io scheduler anticipatory registered
[    0.968197] io scheduler deadline registered
[    0.968207] io scheduler cfq registered (default)
[    0.968323] pci 0000:01:00.0: Boot video device
[    0.969769] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.969795] pcieport-driver 0000:00:01.0: found MSI capability
[    0.969813] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[    0.969820] pci_express 0000:00:01.0:pcie00: allocate port service
[    0.969830] pci_express 0000:00:01.0:pcie03: allocate port service
[    0.969873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.969880] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.969985] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.969987] ACPI: Power Button (FF) [PWRF]
[    0.970021] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.970022] ACPI: Power Button (CM) [PWRB]
[    0.970060] fan PNP0C0B:00: registered as cooling_device0
[    0.970064] ACPI: Fan [FAN] (on)
[    0.970364] ACPI: SSDT CFEE7680, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
[    0.970530] processor ACPI_CPU:00: registered as cooling_device1
[    0.970665] ACPI: SSDT CFEE7B40, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
[    0.970818] processor ACPI_CPU:01: registered as cooling_device2
[    0.972245] thermal LNXTHERM:01: registered as thermal_zone0
[    0.972447] ACPI: Thermal Zone [THRM] (40 C)
[    0.972483] isapnp: Scanning for PnP cards...
[    1.325248] isapnp: No Plug & Play device found
[    1.332691] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.333460] brd: module loaded
[    1.333687] loop: module loaded
[    1.333736] Fixed MDIO Bus: probed
[    1.333741] PPP generic driver version 2.4.2
[    1.333781] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.333802] Driver 'sd' needs updating - please use bus_type methods
[    1.333810] Driver 'sr' needs updating - please use bus_type methods
[    1.333861] ata_piix 0000:00:1f.2: version 2.12
[    1.333872] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.333875] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.333908] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.333947] scsi0 : ata_piix
[    1.334000] scsi1 : ata_piix
[    1.334497] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[    1.334501] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[    2.128057] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.128069] ata1.01: SATA link down (SStatus 0 SControl 300)
[    2.136520] ata1.00: ATA-8: WDC WD5000AAKS-75A7B0, 01.03B01, max UDMA/133
[    2.136523] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.144521] ata1.00: configured for UDMA/133
[    2.940055] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.940066] ata2.01: SATA link down (SStatus 0 SControl 300)
[    2.948188] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, C106, max UDMA/100
[    2.964205] ata2.00: configured for UDMA/100
[    2.964655] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-7 01.0 PQ: 0 ANSI: 5
[    2.964733] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    2.964745] sd 0:0:0:0: [sda] Write Protect is off
[    2.964747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.964766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.964811] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    2.964821] sd 0:0:0:0: [sda] Write Protect is off
[    2.964823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.964841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.964844]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    3.026331] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.026359] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.027913] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H73N C106 PQ: 0 ANSI: 5
[    3.032390] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.032393] Uniform CD-ROM driver Revision: 3.20
[    3.032487] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.032524] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.032538] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.032541] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    3.032569] ata_piix 0000:00:1f.5: setting latency timer to 64
[    3.032599] scsi2 : ata_piix
[    3.032641] scsi3 : ata_piix
[    3.032864] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[    3.032867] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[    3.362549] ata3: SATA link down (SStatus 0 SControl 300)
[    3.690541] ata4: SATA link down (SStatus 0 SControl 300)
[    3.691007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.691021] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.691033] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.691036] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.691075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.694958] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.694968] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[    3.708009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.708077] usb usb1: configuration #1 chosen from 1 choice
[    3.708107] hub 1-0:1.0: USB hub found
[    3.708115] hub 1-0:1.0: 6 ports detected
[    3.708198] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.708205] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.708208] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.708242] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.712142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.712151] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[    3.728009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.728069] usb usb2: configuration #1 chosen from 1 choice
[    3.728098] hub 2-0:1.0: USB hub found
[    3.728105] hub 2-0:1.0: 6 ports detected
[    3.728185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.728196] uhci_hcd: USB Universal Host Controller Interface driver
[    3.728210] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.728215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.728217] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.728249] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.728274] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[    3.728326] usb usb3: configuration #1 chosen from 1 choice
[    3.728344] hub 3-0:1.0: USB hub found
[    3.728349] hub 3-0:1.0: 2 ports detected
[    3.728408] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.728412] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.728414] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.728445] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.728469] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[    3.728519] usb usb4: configuration #1 chosen from 1 choice
[    3.728536] hub 4-0:1.0: USB hub found
[    3.728541] hub 4-0:1.0: 2 ports detected
[    3.728601] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.728605] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    3.728608] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.728637] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    3.728655] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[    3.728705] usb usb5: configuration #1 chosen from 1 choice
[    3.728723] hub 5-0:1.0: USB hub found
[    3.728727] hub 5-0:1.0: 2 ports detected
[    3.728786] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.728791] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.728793] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.728822] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    3.728840] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[    3.728898] usb usb6: configuration #1 chosen from 1 choice
[    3.728916] hub 6-0:1.0: USB hub found
[    3.728920] hub 6-0:1.0: 2 ports detected
[    3.728985] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.728989] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.728992] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.729024] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.729043] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[    3.729093] usb usb7: configuration #1 chosen from 1 choice
[    3.729111] hub 7-0:1.0: USB hub found
[    3.729115] hub 7-0:1.0: 2 ports detected
[    3.729176] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.729180] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.729182] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.729212] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.729230] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[    3.729280] usb usb8: configuration #1 chosen from 1 choice
[    3.729300] hub 8-0:1.0: USB hub found
[    3.729304] hub 8-0:1.0: 2 ports detected
[    3.729404] usbcore: registered new interface driver libusual
[    3.729425] usbcore: registered new interface driver usbserial
[    3.729433] USB Serial support registered for generic
[    3.729446] usbcore: registered new interface driver usbserial_generic
[    3.729448] usbserial: USB Serial Driver core
[    3.729485] PNP: No PS/2 controller found. Probing ports directly.
[    3.729752] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.729756] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.729832] mice: PS/2 mouse device common for all mice
[    3.729923] rtc_cmos 00:04: RTC can wake from S4
[    3.729946] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    3.729967] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.730010] device-mapper: uevent: version 1.0.3
[    3.730069] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    3.730120] device-mapper: multipath: version 1.0.5 loaded
[    3.730122] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.730174] EISA: Probing bus 0 at eisa.0
[    3.730197] EISA: Detected 0 cards.
[    3.730231] cpuidle: using governor ladder
[    3.730233] cpuidle: using governor menu
[    3.730603] TCP cubic registered
[    3.730672] NET: Registered protocol family 10
[    3.730988] lo: Disabled Privacy Extensions
[    3.731232] NET: Registered protocol family 17
[    3.731244] Bluetooth: L2CAP ver 2.11
[    3.731245] Bluetooth: L2CAP socket layer initialized
[    3.731247] Bluetooth: SCO (Voice Link) ver 0.6
[    3.731249] Bluetooth: SCO socket layer initialized
[    3.731266] Bluetooth: RFCOMM socket layer initialized
[    3.731270] Bluetooth: RFCOMM TTY layer initialized
[    3.731271] Bluetooth: RFCOMM ver 1.10
[    3.731726] Using IPI No-Shortcut mode
[    3.731774] registered taskstats version 1
[    3.731856]   Magic number: 9:566:447
[    3.731900] rtc_cmos 00:04: setting system clock to 2009-09-14 20:24:36 UTC (1252959876)
[    3.731902] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.731903] EDD information not available.
[    3.732074] Freeing unused kernel memory: 532k freed
[    3.732164] Write protecting the kernel text: 4128k
[    3.732196] Write protecting the kernel read-only data: 1532k
[    3.851299] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[    3.851301] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    3.851347] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.851355] e1000e 0000:00:19.0: setting latency timer to 64
[    3.851458] e1000e 0000:00:19.0: irq 2302 for MSI/MSI-X
[    3.879061] b43-pci-bridge 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.879069] b43-pci-bridge 0000:02:01.0: setting latency timer to 64
[    3.926216] Floppy drive(s): fd0 is 1.44M
[    3.936066] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[    3.938690] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:9b:05:52:0f
[    3.938692] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[    3.938719] 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: ffffff-0ff
[    3.943725] FDC 0 is a post-1991 82077
[    4.372515] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    4.553578] usb 4-1: configuration #1 chosen from 1 choice
[    4.613717] PM: Starting manual resume from disk
[    4.613719] PM: Resume from partition 8:7
[    4.613721] PM: Checking hibernation image.
[    4.613879] PM: Resume from disk failed.
[    4.665083] kjournald starting.  Commit interval 5 seconds
[    4.665089] EXT3-fs: mounted filesystem with ordered data mode.
[    4.796515] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    4.964755] usb 5-1: configuration #1 chosen from 1 choice
[    5.204014] usb 5-2: new low speed USB device using uhci_hcd and address 3
[    5.411755] usb 5-2: configuration #1 chosen from 1 choice
[    8.263258] udev: starting version 141
[    8.395600] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[    8.395619] usbcore: registered new interface driver usblp
[    8.395757] usbcore: registered new interface driver hiddev
[    8.408926] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
[    8.432643] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.2-1/input0
[    8.432755] usbcore: registered new interface driver usbhid
[    8.432773] usbhid: v2.6:USB HID core driver
[    8.501402] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.554416] iTCO_vendor_support: vendor-support=0
[    8.555513] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[    8.555709] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[    8.555790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.566512] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.774829] Linux agpgart interface v0.103
[    8.802925] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5
[    8.803966] cfg80211: Calling CRDA to update world regulatory domain
[    8.809135] dell 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.2-2/input0
[    8.912731] cfg80211: World regulatory domain updated:
[    8.912734] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.912736] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.912737] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.912739] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.912741] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.912742] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.966768] b43-phy0: Broadcom 4318 WLAN found
[    9.032807] phy0: Selected rate control algorithm 'pid'
[    9.191229] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[    9.233157] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.233217] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.427635] lp: driver loaded but no devices found
[    9.478515] Adding 9823708k swap on /dev/sda7.  Priority:-1 extents:1 across:9823708k
[   10.004435] EXT3 FS on sda6, internal journal
[   10.906550] type=1505 audit(1252959883.672:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2002
[   10.939881] type=1505 audit(1252959883.704:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2006
[   10.939945] type=1505 audit(1252959883.704:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2006
[   10.939978] type=1505 audit(1252959883.704:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2006
[   10.940012] type=1505 audit(1252959883.704:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2006
[   11.032474] type=1505 audit(1252959883.796:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2011
[   11.032608] type=1505 audit(1252959883.800:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2011
[   11.052414] type=1505 audit(1252959883.816:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2015
[   13.421649] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.421652] Bluetooth: BNEP filters: protocol multicast
[   13.431226] Bridge firewalling registered
[   14.530953] ppdev: user-space parallel port driver
[   18.252187] e1000e 0000:00:19.0: irq 2302 for MSI/MSI-X
[   18.308044] e1000e 0000:00:19.0: irq 2302 for MSI/MSI-X
[   18.308306] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.372196] input: b43-phy0 as /devices/virtual/input/input6
[   18.420030] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   18.443375] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   18.443380] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   18.455705] input: b43-phy0 as /devices/virtual/input/input7
[   18.488024] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   18.489577] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   18.489580] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[  376.646685] input: b43-phy0 as /devices/virtual/input/input8
[  376.692527] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[  376.694953] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[  376.694958] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[  398.162018] input: b43-phy0 as /devices/virtual/input/input9
[  398.212527] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[  398.214939] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[  398.214944] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 1083.500516] kjournald starting.  Commit interval 5 seconds
[ 1083.501126] EXT3 FS on sda1, internal journal
[ 1083.501132] EXT3-fs: mounted filesystem with ordered data mode.
[ 5586.107780] input: b43-phy0 as /devices/virtual/input/input10
[ 5586.152028] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 5586.154466] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 5586.154471] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 5673.853701] ieee80211_crypt: registered algorithm 'NULL'
[ 5673.857002] wl: module license '' taints kernel.
[10789.720014] usb 2-2: new high speed USB device using ehci_hcd and address 2
[10789.853243] usb 2-2: configuration #1 chosen from 1 choice
[10789.903721] Initializing USB Mass Storage driver...
[10789.903857] scsi4 : SCSI emulation for USB Mass Storage devices
[10789.903937] usb-storage: device found at 2
[10789.903939] usb-storage: waiting for device to settle before scanning
[10789.903951] usbcore: registered new interface driver usb-storage
[10789.903954] USB Mass Storage support registered.
[10794.900097] usb-storage: device scan complete
[10794.900675] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[10794.901944] sd 4:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[10794.902439] sd 4:0:0:0: [sdb] Write Protect is off
[10794.902442] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
[10794.902445] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[10794.914749] sd 4:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[10794.916943] sd 4:0:0:0: [sdb] Write Protect is off
[10794.916946] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
[10794.916949] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[10794.916955]  sdb: sdb1
[10794.917767] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[10794.917841] sd 4:0:0:0: Attached scsi generic sg2 type 0
[10795.214568] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[14189.735274] usb 2-2: USB disconnect, address 2
[14193.752012] usb 2-1: new high speed USB device using ehci_hcd and address 3
[14193.885243] usb 2-1: configuration #1 chosen from 1 choice
[14193.885535] scsi5 : SCSI emulation for USB Mass Storage devices
[14193.892519] usb-storage: device found at 3
[14193.892522] usb-storage: waiting for device to settle before scanning
[14198.892089] usb-storage: device scan complete
[14198.892460] scsi 5:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[14198.893569] sd 5:0:0:0: [sdc] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[14198.894069] sd 5:0:0:0: [sdc] Write Protect is off
[14198.894072] sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 08
[14198.894075] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[14198.904818] sd 5:0:0:0: [sdc] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[14198.905311] sd 5:0:0:0: [sdc] Write Protect is off
[14198.905314] sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 08
[14198.905317] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[14198.905322]  sdc: sdc1
[14198.906134] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[14198.906207] sd 5:0:0:0: Attached scsi generic sg2 type 0
[14199.151313] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[14214.681842] usb 2-1: USB disconnect, address 3
[14216.596017] usb 2-1: new high speed USB device using ehci_hcd and address 4
[14216.728902] usb 2-1: configuration #1 chosen from 1 choice
[14216.729077] scsi6 : SCSI emulation for USB Mass Storage devices
[14216.729402] usb-storage: device found at 4
[14216.729405] usb-storage: waiting for device to settle before scanning
[14221.728110] usb-storage: device scan complete
[14221.728742] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[14221.729858] sd 6:0:0:0: [sdc] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[14221.730332] sd 6:0:0:0: [sdc] Write Protect is off
[14221.730336] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 08
[14221.730339] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[14221.741083] sd 6:0:0:0: [sdc] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[14221.741577] sd 6:0:0:0: [sdc] Write Protect is off
[14221.741580] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 08
[14221.741583] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[14221.741588]  sdc: sdc1
[14221.742402] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[14221.742475] sd 6:0:0:0: Attached scsi generic sg2 type 0
[14221.950959] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[15044.920231] scsi 4:0:0:0: rejecting I/O to dead device
[46531.967095] usb 2-1: USB disconnect, address 4
[181779.900013] usb 2-2: new high speed USB device using ehci_hcd and address 5
[181780.033170] usb 2-2: configuration #1 chosen from 1 choice
[181780.033439] scsi7 : SCSI emulation for USB Mass Storage devices
[181780.033652] usb-storage: device found at 5
[181780.033655] usb-storage: waiting for device to settle before scanning
[181785.032124] usb-storage: device scan complete
[181785.032494] scsi 7:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[181785.033617] sd 7:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[181785.034102] sd 7:0:0:0: [sdb] Write Protect is off
[181785.034105] sd 7:0:0:0: [sdb] Mode Sense: 45 00 00 08
[181785.034108] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[181785.046641] sd 7:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[181785.047992] sd 7:0:0:0: [sdb] Write Protect is off
[181785.047996] sd 7:0:0:0: [sdb] Mode Sense: 45 00 00 08
[181785.047998] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[181785.048003]  sdb: sdb1
[181785.049724] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[181785.049799] sd 7:0:0:0: Attached scsi generic sg2 type 0
[181785.246972] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[181815.185736] scsi 6:0:0:0: rejecting I/O to dead device
[182639.667977] usb 2-2: USB disconnect, address 5
[350252.044014] usb 2-2: new high speed USB device using ehci_hcd and address 6
[350252.177174] usb 2-2: configuration #1 chosen from 1 choice
[350252.177462] scsi8 : SCSI emulation for USB Mass Storage devices
[350252.188575] usb-storage: device found at 6
[350252.188579] usb-storage: waiting for device to settle before scanning
[350257.188132] usb-storage: device scan complete
[350257.188510] scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[350257.189585] sd 8:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[350257.190106] sd 8:0:0:0: [sdb] Write Protect is off
[350257.190109] sd 8:0:0:0: [sdb] Mode Sense: 45 00 00 08
[350257.190112] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[350257.208610] sd 8:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[350257.209104] sd 8:0:0:0: [sdb] Write Protect is off
[350257.209107] sd 8:0:0:0: [sdb] Mode Sense: 45 00 00 08
[350257.209110] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[350257.209116]  sdb: sdb1
[350257.209927] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[350257.210003] sd 8:0:0:0: Attached scsi generic sg2 type 0
[350257.432483] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[350645.548526] usb 2-2: USB disconnect, address 6
[351046.592017] usb 2-2: new high speed USB device using ehci_hcd and address 7
[351046.725227] usb 2-2: configuration #1 chosen from 1 choice
[351046.725528] scsi9 : SCSI emulation for USB Mass Storage devices
[351046.725729] usb-storage: device found at 7
[351046.725732] usb-storage: waiting for device to settle before scanning
[351051.724204] usb-storage: device scan complete
[351051.724570] scsi 9:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[351051.725676] sd 9:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[351051.726173] sd 9:0:0:0: [sdb] Write Protect is off
[351051.726177] sd 9:0:0:0: [sdb] Mode Sense: 45 00 00 08
[351051.726180] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[351051.738392] sd 9:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[351051.739048] sd 9:0:0:0: [sdb] Write Protect is off
[351051.739052] sd 9:0:0:0: [sdb] Mode Sense: 45 00 00 08
[351051.739054] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[351051.739060]  sdb: sdb1
[351051.745249] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[351051.745326] sd 9:0:0:0: Attached scsi generic sg2 type 0
[351051.969922] hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
[351224.046563] usb 2-2: USB disconnect, address 7
[351224.062234] scsi 9:0:0:0: rejecting I/O to dead device
[351704.960014] usb 2-2: new high speed USB device using ehci_hcd and address 8
[351705.093230] usb 2-2: configuration #1 chosen from 1 choice
[351705.093543] scsi10 : SCSI emulation for USB Mass Storage devices
[351705.093769] usb-storage: device found at 8
[351705.093772] usb-storage: waiting for device to settle before scanning
[351710.092209] usb-storage: device scan complete
[351710.092701] scsi 10:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
[351710.094053] sd 10:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[351710.094674] sd 10:0:0:0: [sdb] Write Protect is off
[351710.094677] sd 10:0:0:0: [sdb] Mode Sense: 45 00 00 08
[351710.094680] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[351710.101181] sd 10:0:0:0: [sdb] 15731711 512-byte hardware sectors: (8.05 GB/7.50 GiB)
[351710.105555] sd 10:0:0:0: [sdb] Write Protect is off
[351710.105559] sd 10:0:0:0: [sdb] Mode Sense: 45 00 00 08
[351710.105562] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[351710.105568]  sdb: sdb1
[351710.106374] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[351710.106447] sd 10:0:0:0: Attached scsi generic sg2 type 0
    dmesg | grep firmware

    Code:
    [   18.420030] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   18.443380] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   18.488024] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   18.489580] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[  376.692527] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[  376.694958] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[  398.212527] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[  398.214944] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 5586.152028] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 5586.154471] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).

    uname -r
    Code:
    2.6.28-11-generic
    Reply With Quote Reply With Quote
  4. 09-19-2009 #4
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    As you can see from the firmware error messages, you need to install firmware to get the wireless to work. This can be done using apt, if you have a wired internet connection.
    Code:
    sudo apt-get install b43-fwcutter
    When asked: "Fetch and install firmware?", answer "Yes" (press enter).
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  5. 09-19-2009 #5
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    I also see the Broadcom wl driver loading, but I don't see a wireless device that would use this driver. It could interfere with the correct driver, so I recommend removing it and blacklisting it.
    Code:
    sudo modporbe -r wl
    Code:
     sudo echo blacklist wl >> /etc/modprobe.d/blacklist.conf
    Make sure you use the double chevrons (>>), as this will add the wl module to the blacklist.conf file. Using only one chevron will replace everything with just leaving "blacklist wl".

    You can save a copy of the blacklist file first, in case of problems.
    Code:
    sudo cp /etc/modprobe.d/blacklist.conf blacklist.old
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  6. 09-19-2009 #6
    jonathan731
    jonathan731 is offline
    Just Joined!
    Join Date
    Feb 2009
    Posts
    38
    thanks for the help. Is there some way to do the firmware installation without using apt-get because the way my home is set up, getting a wired connection will be extremely difficult.
    Reply With Quote Reply With Quote
  7. 09-19-2009 #7
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    Quote Originally Posted by waterhead View Post
    Make sure you use the double chevrons (>>), as this will add the wl module to the blacklist.conf file. Using only one chevron will replace everything with just leaving "blacklist wl".
    Chevrons huh? I often wondered if they actually had a fancy name for those keys. Thanks for that Paul.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  8. 09-19-2009 #8
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    Download the b43-firmware_1.1-0cafuego1_all.deb file, from here. (Not the source files)

    Component broadcom of jaunty-cafuego

    Double clicking the downloaded package should bring up the installer program.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  9. 09-19-2009 #9
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    Quote Originally Posted by MikeTbob View Post
    Chevrons huh? I often wondered if they actually had a fancy name for those keys. Thanks for that Paul.
    I guess I may have made that up, but i got it from the Chevron gas stations. It sounds better than "double greater-than signs".
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  10. 09-19-2009 #10
    jonathan731
    jonathan731 is offline
    Just Joined!
    Join Date
    Feb 2009
    Posts
    38
    i downloaded it ran it. no change so i restarted and now there isnt even an option for wireless. it just says wired connection disconnected when i right click the icon
    Reply With Quote Reply With Quote
Page 1 of 2 1 2 LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

...