Wireless connection not found

[Scallywag]

I have an HP Mini that I just installed Ubuntu Netbook Remix 9.10 onto.
My wireless connection doesn't work at all! How do I fix it so it will connect? I have a network running thru a Linksys WRT54G router. All other PC's have Ubuntu 9.10 running and are working fine. Please help!!

[reed9]

Hello and welcome.

We need more info. Please read the wireless setup sticky to get started.

[Scallywag]

OK. Here's some info:

Distribution: 2.6.31-14-generic

lspci:

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
	Kernel driver in use: i915
	Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
	Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
	Kernel modules: i2c-i801
01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

lsmod:

Module                  Size  Used by
ip6table_filter         3164  0 
ip6_tables             13004  1 ip6table_filter
binfmt_misc             8356  1 
ppdev                   6688  0 
snd_hda_codec_idt      59844  1 
snd_hda_intel          26920  2 
snd_hda_codec          75708  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep               7200  1 snd_hda_codec
snd_pcm_oss            37920  0 
snd_mixer_oss          16028  1 snd_pcm_oss
joydev                 10272  0 
snd_pcm                75296  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           2656  0 
snd_seq_oss            28576  0 
snd_seq_midi            6432  0 
snd_rawmidi            22208  1 snd_seq_midi
iptable_filter          3100  0 
snd_seq_midi_event      6940  2 snd_seq_oss,snd_seq_midi
ip_tables              11692  1 iptable_filter
snd_seq                50224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
x_tables               16544  2 ip6_tables,ip_tables
snd_timer              22276  2 snd_pcm,snd_seq
uvcvideo               59080  0 
b43                   122136  0 
snd_seq_device          6920  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
mac80211              181236  1 b43
videodev               36736  1 uvcvideo
psmouse                56180  0 
snd                    59204  16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
v4l1_compat            14496  2 uvcvideo,videodev
serio_raw               5280  0 
cfg80211               93052  2 b43,mac80211
soundcore               7264  1 snd
lp                      8964  0 
led_class               4096  1 b43
snd_page_alloc          9156  2 snd_hda_intel,snd_pcm
parport                35340  2 ppdev,lp
usbhid                 38208  0 
fbcon                  36640  72 
tileblit                2460  1 fbcon
font                    8124  1 fbcon
bitblit                 5372  1 fbcon
softcursor              1756  1 bitblit
ssb                    35300  1 b43
i915                  221064  4 
drm                   159584  4 i915
i2c_algo_bit            5760  1 i915
intel_agp              27484  2 i915
agpgart                34988  2 drm,intel_agp
video                  19380  1 i915
output                  2780  1 video

dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
[    0.000000]  BIOS-e820: 000000003f7b0000 - 000000003f7be000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x3f7b0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f7b0000 (usable)
[    0.000000]  modified: 000000003f7b0000 - 000000003f7be000 (ACPI data)
[    0.000000]  modified: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
[    0.000000]  modified: 000000003f7f0000 - 000000003f800000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 2f2bc000 - 2fa036f4
[    0.000000] ACPI: RSDP 000f9c30 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 3f7b0000 0003C (v01 102408 RSDT1141 20081024 MSFT 00000097)
[    0.000000] ACPI: FACP 3f7b0200 00084 (v02 102408 FACP1141 20081024 MSFT 00000097)
[    0.000000] ACPI: DSDT 3f7b0430 07C47 (v01  361A0 361A0F03 00000F03 INTL 20051117)
[    0.000000] ACPI: FACS 3f7be000 00040
[    0.000000] ACPI: APIC 3f7b0390 0005C (v01 102408 APIC1141 20081024 MSFT 00000097)
[    0.000000] ACPI: MCFG 3f7b03f0 0003C (v01 102408 OEMMCFG  20081024 MSFT 00000097)
[    0.000000] ACPI: OEMB 3f7be040 00224 (v01 102408 OEMB1141 20081024 MSFT 00000097)
[    0.000000] ACPI: ASF! 3f7b8080 00075 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[    0.000000] ACPI: SSDT 3f7bebe0 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [002f2bc000 - 002fa036f4]          RAMDISK ==> [002f2bc000 - 002fa036f4]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008a9000 - 00008ac170]              BRK ==> [00008a9000 - 00008ac170]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f7b0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f7b0
[    0.000000] On node 0 totalpages: 259915
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 256 pages used for memmap
[    0.000000]   HighMem zone: 32434 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c17f4000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257883
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=110edf73-9c53-448f-83eb-ea4841750177 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5200320 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f7b0)
[    0.000000] Memory: 1009616k/1040064k available (4565k kernel code, 29472k reserved, 2143k data, 540k init, 130760k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.187 MHz processor.
[    0.001781] Console: colour VGA+ 80x25
[    0.001788] console [tty0] enabled
[    0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.37 BogoMIPS (lpj=6384748)
[    0.004059] Security Framework initialized
[    0.004096] AppArmor: AppArmor initialized
[    0.004111] Mount-cache hash table entries: 512
[    0.004340] Initializing cgroup subsys ns
[    0.004351] Initializing cgroup subsys cpuacct
[    0.004360] Initializing cgroup subsys memory
[    0.004372] Initializing cgroup subsys freezer
[    0.004377] Initializing cgroup subsys net_cls
[    0.004401] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004407] CPU: L2 cache: 512K
[    0.004412] CPU: Physical Processor ID: 0
[    0.004416] CPU: Processor Core ID: 0
[    0.004423] mce: CPU supports 5 MCE banks
[    0.004438] CPU0: Thermal monitoring enabled (TM2)
[    0.004446] using mwait in idle threads.
[    0.004458] Performance Counters: Atom events, Intel PMU driver.
[    0.004472] ... version:                 3
[    0.004477] ... bit width:               40
[    0.004481] ... generic counters:        2
[    0.004485] ... value mask:              000000ffffffffff
[    0.004490] ... max period:              000000007fffffff
[    0.004494] ... fixed-purpose counters:  3
[    0.004499] ... counter mask:            0000000700000003
[    0.004507] Checking 'hlt' instruction... OK.
[    0.024015] ACPI: Core revision 20090521
[    0.040472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.082551] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3192.22 BogoMIPS (lpj=6384446)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004000] CPU: L2 cache: 512K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] mce: CPU supports 5 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.169043] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.169078] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.172048] Brought up 2 CPUs
[    0.172055] Total of 2 processors activated (6384.59 BogoMIPS).
[    0.172118] CPU0 attaching sched-domain:
[    0.172125]  domain 0: span 0-1 level SIBLING
[    0.172132]   groups: 0 1
[    0.172142] CPU1 attaching sched-domain:
[    0.172147]  domain 0: span 0-1 level SIBLING
[    0.172153]   groups: 1 0
[    0.172309] Booting paravirtualized kernel on bare hardware
[    0.172473] regulator: core version 0.5
[    0.172473] Time: 18:31:16  Date: 11/03/09
[    0.172473] NET: Registered protocol family 16
[    0.172473] EISA bus registered
[    0.172473] ACPI: bus type pci registered
[    0.172583] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.172590] PCI: Not using MMCONFIG.
[    0.172884] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[    0.172889] PCI: Using configuration type 1 for base access
[    0.177307] bio: create slab <bio-0> at 0
[    0.177307] ACPI: EC: Look up EC in DSDT
[    0.687707] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    1.132431] ACPI: Interpreter enabled
[    1.132444] ACPI: (supports S0 S3 S4 S5)
[    1.132491] ACPI: Using IOAPIC for interrupt routing
[    1.132582] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    1.146204] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    1.146204] PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[    1.146204] PCI: Using MMCONFIG for extended config space
[    1.159589] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.159597] ACPI: EC: driver started in interrupt mode
[    1.160038] ACPI: No dock devices found.
[    1.160350] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.160497] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe980000-0xfe9fffff]
[    1.160508] pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87]
[    1.160517] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[    1.160527] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe940000-0xfe97ffff]
[    1.160582] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe880000-0xfe8fffff]
[    1.160711] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe938000-0xfe93bfff]
[    1.160780] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.160788] pci 0000:00:1b.0: PME# disabled
[    1.160881] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.160889] pci 0000:00:1c.0: PME# disabled
[    1.160985] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.160993] pci 0000:00:1c.1: PME# disabled
[    1.161070] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[    1.161150] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
[    1.161226] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[    1.161302] pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
[    1.161384] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe937c00-0xfe937fff]
[    1.161458] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.161467] pci 0000:00:1d.7: PME# disabled
[    1.161648] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    1.161660] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    1.161669] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    1.161677] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 0003)
[    1.161685] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    1.161763] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    1.161775] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    1.161787] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[    1.161799] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[    1.161812] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    1.161899] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    1.162143] pci 0000:01:00.0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
[    1.162361] pci 0000:01:00.0: supports D1 D2
[    1.162501] pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    1.162573] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[    1.162582] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    1.162660] pci 0000:00:1e.0: transparent bridge
[    1.162696] pci_bus 0000:00: on NUMA node 0
[    1.162709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.162965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.163329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    1.179837] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.180065] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.180273] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    1.180480] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    1.180691] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.180903] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.181116] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.181332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.181730] SCSI subsystem initialized
[    1.181814] libata version 3.00 loaded.
[    1.181814] usbcore: registered new interface driver usbfs
[    1.181814] usbcore: registered new interface driver hub
[    1.181814] usbcore: registered new device driver usb
[    1.181814] ACPI: WMI: Mapper loaded
[    1.181814] PCI: Using ACPI for IRQ routing
[    1.192025] Bluetooth: Core ver 2.15
[    1.192071] NET: Registered protocol family 31
[    1.192071] Bluetooth: HCI device and connection manager initialized
[    1.192071] Bluetooth: HCI socket layer initialized
[    1.192071] NetLabel: Initializing
[    1.192071] NetLabel:  domain hash size = 128
[    1.192071] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.192087] NetLabel:  unlabeled traffic allowed by default
[    1.192306] hpet clockevent registered
[    1.192313] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.192324] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.192335] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    1.212024] pnp: PnP ACPI init
[    1.212066] ACPI: bus type pnp registered
[    1.216273] pnp: PnP ACPI: found 12 devices
[    1.216280] ACPI: ACPI bus type pnp unregistered
[    1.216288] PnPBIOS: Disabled by ACPI PNP
[    1.216313] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    1.216333] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    1.216341] system 00:08: ioport range 0x500-0x501 has been reserved
[    1.216348] system 00:08: ioport range 0x800-0x87f has been reserved
[    1.216355] system 00:08: ioport range 0x480-0x4bf has been reserved
[    1.216363] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.216371] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    1.216378] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[    1.216392] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    1.216399] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.216412] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[    1.216426] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    1.216433] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[    1.216441] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    1.216448] system 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
[    1.216456] system 00:0b: iomem range 0xfed90000-0xffffffff could not be reserved
[    1.251365] AppArmor: AppArmor Filesystem Enabled
[    1.251439] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    1.251445] pci 0000:00:1c.0:   IO window: disabled
[    1.251457] pci 0000:00:1c.0:   MEM window: 0xfea00000-0xfeafffff
[    1.251468] pci 0000:00:1c.0:   PREFETCH window: disabled
[    1.251482] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    1.251491] pci 0000:00:1c.1:   IO window: 0xe000-0xefff
[    1.251505] pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
[    1.251515] pci 0000:00:1c.1:   PREFETCH window: disabled
[    1.251527] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    1.251533] pci 0000:00:1e.0:   IO window: disabled
[    1.251545] pci 0000:00:1e.0:   MEM window: disabled
[    1.251554] pci 0000:00:1e.0:   PREFETCH window: disabled
[    1.251579]   alloc irq_desc for 16 on node -1
[    1.251599]   alloc kstat_irqs on node -1
[    1.251611] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.251621] pci 0000:00:1c.0: setting latency timer to 64
[    1.251636]   alloc irq_desc for 17 on node -1
[    1.251640]   alloc kstat_irqs on node -1
[    1.251649] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.251658] pci 0000:00:1c.1: setting latency timer to 64
[    1.251670] pci 0000:00:1e.0: setting latency timer to 64
[    1.251679] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.251686] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    1.251693] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[    1.251699] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    1.251706] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[    1.251712] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    1.251718] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    1.251799] NET: Registered protocol family 2
[    1.252021] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.252689] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.253697] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.254167] TCP: Hash tables configured (established 131072 bind 65536)
[    1.254174] TCP reno registered
[    1.254411] NET: Registered protocol family 1
[    1.254548] Trying to unpack rootfs image as initramfs...
[    1.613726] Freeing initrd memory: 7453k freed
[    1.621334] cpufreq-nforce2: No nForce2 chipset.
[    1.621398] Scanning for low memory corruption every 60 seconds
[    1.621612] audit: initializing netlink socket (disabled)
[    1.621642] type=2000 audit(1257273077.619:1): initialized
[    1.639252] highmem bounce pool size: 64 pages
[    1.639265] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.642634] VFS: Disk quotas dquot_6.5.2
[    1.642771] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.644087] fuse init (API version 7.12)
[    1.644285] msgmni has been set to 1732
[    1.644736] alg: No test for stdrng (krng)
[    1.644769] io scheduler noop registered
[    1.644775] io scheduler anticipatory registered
[    1.644779] io scheduler deadline registered
[    1.644892] io scheduler cfq registered (default)
[    1.644917] pci 0000:00:02.0: Boot video device
[    1.645241]   alloc irq_desc for 24 on node -1
[    1.645247]   alloc kstat_irqs on node -1
[    1.645265] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    1.645280] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.645486]   alloc irq_desc for 25 on node -1
[    1.645491]   alloc kstat_irqs on node -1
[    1.645505] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    1.645520] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.645709] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.645873] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.648212] ACPI: AC Adapter [AC0] (on-line)
[    1.648349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.648358] ACPI: Power Button [PWRF]
[    1.648474] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
[    1.648538] ACPI: Lid Switch [LID]
[    1.648638] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.648645] ACPI: Sleep Button [SLPB]
[    1.648738] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    1.648745] ACPI: Power Button [PWRB]
[    1.650001] ACPI: SSDT 3f7be340 0023C (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    1.650867] ACPI: SSDT 3f7be610 005D0 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.651565] Monitor-Mwait will be used to enter C-1 state
[    1.651644] Monitor-Mwait will be used to enter C-2 state
[    1.651702] Monitor-Mwait will be used to enter C-3 state
[    1.651723] Marking TSC unstable due to TSC halts in idle
[    1.651772] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.651830] processor LNXCPU:00: registered as cooling_device0
[    1.652584] ACPI: SSDT 3f7be270 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    1.653199] ACPI: SSDT 3f7be580 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    1.654129] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.654184] processor LNXCPU:01: registered as cooling_device1
[    1.655790] Switched to high resolution mode on CPU 1
[    1.655841] Switched to high resolution mode on CPU 0
[    1.661253] thermal LNXTHERM:01: registered as thermal_zone0
[    1.661272] ACPI: Thermal Zone [THRM] (55 C)
[    1.661391] isapnp: Scanning for PnP cards...
[    1.691053] ACPI: Battery Slot [BAT1] (battery present)
[    2.015372] isapnp: No Plug & Play device found
[    2.018044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.020748] brd: module loaded
[    2.021771] loop: module loaded
[    2.021950] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    2.022180] ata_piix 0000:00:1f.1: version 2.13
[    2.022208]   alloc irq_desc for 18 on node -1
[    2.022213]   alloc kstat_irqs on node -1
[    2.022227] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.022297] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.022471] scsi0 : ata_piix
[    2.022675] scsi1 : ata_piix
[    2.025543] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.025551] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.027536] Fixed MDIO Bus: probed
[    2.027618] PPP generic driver version 2.4.2
[    2.027837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.027884]   alloc irq_desc for 23 on node -1
[    2.027889]   alloc kstat_irqs on node -1
[    2.027902] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.027931] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.027939] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.028076] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.031987] ehci_hcd 0000:00:1d.7: debug port 1
[    2.031998] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.032044] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
[    2.036027] ata2: port disabled. ignoring.
[    2.044027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.044232] usb usb1: configuration #1 chosen from 1 choice
[    2.044299] hub 1-0:1.0: USB hub found
[    2.044318] hub 1-0:1.0: 8 ports detected
[    2.044459] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.044508] uhci_hcd: USB Universal Host Controller Interface driver
[    2.044581] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.044595] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.044603] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.044686] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.044726] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[    2.044917] usb usb2: configuration #1 chosen from 1 choice
[    2.044979] hub 2-0:1.0: USB hub found
[    2.044994] hub 2-0:1.0: 2 ports detected
[    2.045109]   alloc irq_desc for 19 on node -1
[    2.045115]   alloc kstat_irqs on node -1
[    2.045128] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.045139] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.045146] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.045222] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.045270] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[    2.045441] usb usb3: configuration #1 chosen from 1 choice
[    2.045502] hub 3-0:1.0: USB hub found
[    2.045516] hub 3-0:1.0: 2 ports detected
[    2.045625] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.045637] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.045644] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.045711] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.045757] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    2.045921] usb usb4: configuration #1 chosen from 1 choice
[    2.045981] hub 4-0:1.0: USB hub found
[    2.045996] hub 4-0:1.0: 2 ports detected
[    2.046093] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.046105] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.046112] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.046177] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.046225] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[    2.046393] usb usb5: configuration #1 chosen from 1 choice
[    2.046453] hub 5-0:1.0: USB hub found
[    2.046468] hub 5-0:1.0: 2 ports detected
[    2.046667] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.050605] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.053516] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.053531] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.053541] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.053550] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.053560] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.053722] mice: PS/2 mouse device common for all mice
[    2.054034] rtc_cmos 00:03: RTC can wake from S4
[    2.054114] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.054154] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.054412] device-mapper: uevent: version 1.0.3
[    2.054644] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.054834] device-mapper: multipath: version 1.1.0 loaded
[    2.054840] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.055140] EISA: Probing bus 0 at eisa.0
[    2.055183] EISA: Detected 0 cards.
[    2.055583] cpuidle: using governor ladder
[    2.055836] cpuidle: using governor menu
[    2.057011] TCP cubic registered
[    2.057396] NET: Registered protocol family 10
[    2.058360] lo: Disabled Privacy Extensions
[    2.059067] NET: Registered protocol family 17
[    2.059113] Bluetooth: L2CAP ver 2.13
[    2.059118] Bluetooth: L2CAP socket layer initialized
[    2.059124] Bluetooth: SCO (Voice Link) ver 0.6
[    2.059128] Bluetooth: SCO socket layer initialized
[    2.059231] Bluetooth: RFCOMM TTY layer initialized
[    2.059240] Bluetooth: RFCOMM socket layer initialized
[    2.059244] Bluetooth: RFCOMM ver 1.11
[    2.060049] Using IPI No-Shortcut mode
[    2.060219] PM: Resume from disk failed.
[    2.060245] registered taskstats version 1
[    2.060455]   Magic number: 1:642:543
[    2.060573] rtc_cmos 00:03: setting system clock to 2009-11-03 18:31:18 UTC (1257273078)
[    2.060582] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.060587] EDD information not available.
[    2.092506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    2.188620] ata1.00: CFA: SanDisk pSSD 16GB, SSD 4.46, max UDMA/66
[    2.188637] ata1.00: 32014080 sectors, multi 0: LBA 
[    2.193189] Clocksource tsc unstable (delta = -118532435 ns)
[    2.197784] ata1.00: configured for UDMA/66
[    2.198041] scsi 0:0:0:0: Direct-Access     ATA      SanDisk pSSD 16G SSD  PQ: 0 ANSI: 5
[    2.198338] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.198448] sd 0:0:0:0: [sda] 32014080 512-byte logical blocks: (16.3 GB/15.2 GiB)
[    2.198582] sd 0:0:0:0: [sda] Write Protect is off
[    2.198589] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.198659] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.198998]  sda: sda1 sda2 < sda5 >
[    2.201840] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.201886] Freeing unused kernel memory: 540k freed
[    2.202380] Write protecting the kernel text: 4568k
[    2.202460] Write protecting the kernel read-only data: 1836k
[    2.417113] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    2.520537] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/input/input6
[    2.520653] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[    2.577791] Linux agpgart interface v0.103
[    2.658972] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    2.659324] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    2.662266] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    2.735110] usb 1-4: configuration #1 chosen from 1 choice
[    2.737776] [drm] Initialized drm 1.1.0 20060810
[    2.780404] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.780419] i915 0000:00:02.0: setting latency timer to 64
[    2.793363] b43-pci-bridge 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.793391] b43-pci-bridge 0000:01:00.0: setting latency timer to 64
[    2.861193] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0
[    3.004049] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    3.028114] [drm] fb0: inteldrmfb frame buffer device
[    3.028131] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.184000] usb 2-1: configuration #1 chosen from 1 choice
[    3.213351] usbcore: registered new interface driver hiddev
[    3.227425] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[    3.227627] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[    3.227668] usbcore: registered new interface driver usbhid
[    3.227675] usbhid: v2.6:USB HID core driver
[    3.375700] [drm] LVDS-8: set mode 1024x600 e
[    3.839799] Console: switching to colour frame buffer device 128x37
[    4.351176] PM: Starting manual resume from disk
[    4.351186] PM: Resume from partition 8:5
[    4.351190] PM: Checking hibernation image.
[    4.351697] PM: Resume from disk failed.
[    4.359327] EXT4-fs (sda1): barriers enabled
[    4.363586] kjournald2 starting: pid 378, dev sda1:8, commit interval 5 seconds
[    4.363646] EXT4-fs (sda1): delayed allocation enabled
[    4.363661] EXT4-fs: file extents enabled
[    4.367358] EXT4-fs: mballoc enabled
[    4.367390] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.612253] type=1505 audit(1257273081.051:2): operation="profile_load" pid=401 name=/sbin/dhclient3
[    4.612859] type=1505 audit(1257273081.051:3): operation="profile_load" pid=401 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.613226] type=1505 audit(1257273081.051:4): operation="profile_load" pid=401 name=/usr/lib/connman/scripts/dhclient-script
[    4.641168] type=1505 audit(1257273081.079:5): operation="profile_load" pid=402 name=/usr/bin/evince
[    4.650067] type=1505 audit(1257273081.087:6): operation="profile_load" pid=402 name=/usr/bin/evince-previewer
[    4.655828] type=1505 audit(1257273081.091:7): operation="profile_load" pid=402 name=/usr/bin/evince-thumbnailer
[    4.668762] type=1505 audit(1257273081.107:8): operation="profile_load" pid=404 name=/usr/lib/cups/backend/cups-pdf
[    4.669561] type=1505 audit(1257273081.107:9): operation="profile_load" pid=404 name=/usr/sbin/cupsd
[    4.973459] Adding 714852k swap on /dev/sda5.  Priority:-1 extents:1 across:714852k 
[    5.076305] EXT4-fs (sda1): internal journal on sda1:8
[    5.097134] udev: starting version 147
[    5.418733] intel_rng: FWH not detected
[    5.597382] lp: driver loaded but no devices found
[    5.720195] cfg80211: Calling CRDA to update world regulatory domain
[    5.895117] Linux video capture interface: v2.00
[    5.974229] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[    6.002754] cfg80211: World regulatory domain updated:
[    6.002763] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.002771] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.002778] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.002784] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.002790] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.002797] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.017125] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
[    6.017237] b43: probe of ssb0:0 failed with error -95
[    6.017320] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[    6.072844] uvcvideo: Found UVC 1.00 device Webcam-101 (10f1:1a08)
[    6.090392] input: Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
[    6.090697] usbcore: registered new interface driver uvcvideo
[    6.090710] USB Video Class driver (v0.1.0)
[    6.412200] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.642761] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000
[    6.679460] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[    7.986913] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.987086] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.169883] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[    8.177768] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.178013] input: HDA Intel Mic at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.178260] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.178481] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.563448] __ratelimit: 3 callbacks suppressed
[    8.563458] type=1505 audit(1257273084.999:11): operation="profile_replace" pid=895 name=/sbin/dhclient3
[    8.564329] type=1505 audit(1257273085.003:12): operation="profile_replace" pid=895 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    8.564782] type=1505 audit(1257273085.003:13): operation="profile_replace" pid=895 name=/usr/lib/connman/scripts/dhclient-script
[    8.576183] type=1505 audit(1257273085.015:14): operation="profile_replace" pid=896 name=/usr/bin/evince
[    8.586511] type=1505 audit(1257273085.023:15): operation="profile_replace" pid=896 name=/usr/bin/evince-previewer
[    8.592962] type=1505 audit(1257273085.031:16): operation="profile_replace" pid=896 name=/usr/bin/evince-thumbnailer
[    8.606882] type=1505 audit(1257273085.043:17): operation="profile_replace" pid=898 name=/usr/lib/cups/backend/cups-pdf
[    8.607974] type=1505 audit(1257273085.043:18): operation="profile_replace" pid=898 name=/usr/sbin/cupsd
[    8.616078] type=1505 audit(1257273085.055:19): operation="profile_replace" pid=900 name=/usr/sbin/tcpdump
[   10.907465] ppdev: user-space parallel port driver
[   11.866821] CPU0 attaching NULL sched-domain.
[   11.866838] CPU1 attaching NULL sched-domain.
[   11.880204] CPU0 attaching sched-domain:
[   11.880216]  domain 0: span 0-1 level SIBLING
[   11.880226]   groups: 0 1
[   11.880242] CPU1 attaching sched-domain:
[   11.880250]  domain 0: span 0-1 level SIBLING
[   11.880258]   groups: 1 0
[   14.306815] CPU0 attaching NULL sched-domain.
[   14.306828] CPU1 attaching NULL sched-domain.
[   14.331514] CPU0 attaching sched-domain:
[   14.331524]  domain 0: span 0-1 level SIBLING
[   14.331530]   groups: 0 1
[   14.331542] CPU1 attaching sched-domain:
[   14.331547]  domain 0: span 0-1 level SIBLING
[   14.331553]   groups: 1 0
[  562.670276] ip6_tables: (C) 2000-2006 Netfilter Core Team

No output from

dmesg | grep firmware

Thanks

[reed9]

01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

This is your card. There are two drivers available for bcm43xx cards, the open source b43 (but requires non-free firmware) and the proprietary broadcom wl driver. For the most part each supports different cards. You need the broadcom wl driver, which is normally available through Ubuntu's driver manager. You should be able to go to Administration -> Restricted Drivers Manager (or it might just be called Drivers Manager or Hardware Manager now), and enable it. You would need a working wired internet connection for that.

[reed9]

Ah, it's Hardware Drivers now.

karmic Gareth Jones

[Scallywag]

Thanks for the info. Is there a way to download the driver from another PC? I don't have an ethernet card on the Mini.

[reed9]

I did a little research and here is what should work.

First, blacklist the b43 and ssb modules, as they conflict.

echo blacklist ssb | sudo tee -a /etc/modprobe.d/blacklist.conf
echo blacklist b43 | sudo tee -a /etc/modprobe.d/blacklist.conf

In theory, there should be a package called bcmwl-kernel-source somewhere on your installation media. See if you can find that. Otherwise you can download it from here, then transfer it to your Ubuntu machine via a USB stick.

Or, since it seems to be included with the installation disc, maybe it gets installed already. Check

dpkg -l | grep bcmwl

If that returns a result, do

sudo apt-get --reinstall bcmwl-kernel-source

Assuming it was not installed, you need to install it. Move the bcmwl-kernel-source package, whether downloaded or on the install media, to your home folder and do

sudo dpkg -i ~/bcmwl-kernel-source_5.10.91.9+bdcom-0ubuntu4_i386.deb

Reboot.

[Scallywag]

I've gotten the bcmwl-kernel-source package installed and it appears to be working but every time I set up my network connection, I lose my password in the Wireless Security tab. I'm selecting WPA & WPA2 Personal since that's how my router is set up....

[Scallywag]

I added another connection "AUTO LINKSYS" and everything is working fine now. I appreciate all your help, reed9!