another karmic wifi issue *different*

[jay105]

hey guys

finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. i seem to be experiencing a problem many have, being that my wifi card (edimax something or other, recognised by the system as Ralink RT2561/RT61 802.11g PCI) which worked on my previous distro is now not working at all. ive done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.

my problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers NOTHING appears at all. i have no drivers present, where most people are talking of 3. i have not found anyone else with this problem.

no network icon at all, no LED flashes from PCI, just nothing at all. my previous distro accpeted it no problem, no install, no configuration, plugged it in and recognized and worked from the outset.

my problem is compounded in addition by not being about to use a wire connection at all.

i have downloaded appropriate driver from internet and put on the karmic machine with usb flash drive, but when i open the configure shell script it flashes up for maybe half a second and disappears again. FRUSTRATING!

any help would be greatly appreciated

[reed9]

Hello. Please read the wireless setup sticky. This will give us more information to work with.

Include the whole output of dmesg. It's long, so make sure to use code tags as mentioned in the sticky.

[jay105]

hi

thanks for the reply

dmesg shows the following (but would not let me see all of the output)

[    0.147245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.164360] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.164360] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.164566] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[    0.164769] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.164978] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[    0.165190] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.165396] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.165600] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.165803] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.166014] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.166218] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.166423] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.166633] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[    0.166837] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.167058] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.167263] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.167470] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[    0.167674] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.167879] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.168090] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.168297] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *7
[    0.168507] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.168711] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.168917] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.169128] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.169333] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.169543] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.169747] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.169952] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.170179] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.170384] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.170590] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.170795] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[    0.171009] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[    0.171214] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[    0.171419] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[    0.171630] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.171838] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.172053] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.172260] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.172468] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
[    0.172682] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.172891] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
[    0.173110] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.173352] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.173569] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[    0.173781] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[    0.174096] SCSI subsystem initialized
[    0.178043] libata version 3.00 loaded.
[    0.178066] usbcore: registered new interface driver usbfs
[    0.178066] usbcore: registered new interface driver hub
[    0.179026] usbcore: registered new device driver usb
[    0.179071] ACPI: WMI: Mapper loaded
[    0.179071] PCI: Using ACPI for IRQ routing
[    0.188048] Bluetooth: Core ver 2.15
[    0.188083] NET: Registered protocol family 31
[    0.188083] Bluetooth: HCI device and connection manager initialized
[    0.188083] Bluetooth: HCI socket layer initialized
[    0.188083] NetLabel: Initializing
[    0.188083] NetLabel:  domain hash size = 128
[    0.188083] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.188083] NetLabel:  unlabeled traffic allowed by default
[    0.196594] pnp: PnP ACPI init
[    0.196611] ACPI: bus type pnp registered
[    0.202562] pnp: PnP ACPI: found 11 devices
[    0.202565] ACPI: ACPI bus type pnp unregistered
[    0.202567] PnPBIOS: Disabled by ACPI PNP
[    0.202580] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.202582] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.202584] system 00:04: ioport range 0x2000-0x207f has been reserved
[    0.202586] system 00:04: ioport range 0x2080-0x20ff has been reserved
[    0.202589] system 00:04: ioport range 0x2400-0x247f has been reserved
[    0.202591] system 00:04: ioport range 0x2480-0x24ff has been reserved
[    0.202593] system 00:04: ioport range 0x2800-0x287f has been reserved
[    0.202595] system 00:04: ioport range 0x2880-0x28ff has been reserved
[    0.202598] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved
[    0.202600] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.202605] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.202607] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.202611] system 00:08: ioport range 0x290-0x29f has been reserved
[    0.202615] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    0.202619] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[    0.202621] system 00:0a: iomem range 0xc0000-0xcffff could not be reserved
[    0.202623] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[    0.202625] system 00:0a: iomem range 0x100000-0x7fffffff could not be reserved
[    0.202628] system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.237570] AppArmor: AppArmor Filesystem Enabled
[    0.237668] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[    0.237670] pci 0000:00:08.0:   IO window: disabled
[    0.237673] pci 0000:00:08.0:   MEM window: 0xfcf00000-0xfcffffff
[    0.237676] pci 0000:00:08.0:   PREFETCH window: disabled
[    0.237679] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[    0.237681] pci 0000:00:0b.0:   IO window: 0xe000-0xefff
[    0.237683] pci 0000:00:0b.0:   MEM window: 0xfd000000-0xfebfffff
[    0.237686] pci 0000:00:0b.0:   PREFETCH window: 0x000000f0000000-0x000000f9ffffff
[    0.237689] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[    0.237691] pci 0000:00:10.0:   IO window: disabled
[    0.237700] pci 0000:00:10.0:   MEM window: disabled
[    0.237706] pci 0000:00:10.0:   PREFETCH window: 0x000000fbc00000-0x000000fbcfffff
[    0.237718] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
[    0.237720] pci 0000:00:12.0:   IO window: disabled
[    0.237728] pci 0000:00:12.0:   MEM window: disabled
[    0.237735] pci 0000:00:12.0:   PREFETCH window: 0x000000fbd00000-0x000000fbdfffff
[    0.237747] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
[    0.237748] pci 0000:00:13.0:   IO window: disabled
[    0.237757] pci 0000:00:13.0:   MEM window: disabled
[    0.237764] pci 0000:00:13.0:   PREFETCH window: 0x000000fbe00000-0x000000fbefffff
[    0.237776] pci 0000:00:14.0: PCI bridge, secondary bus 0000:06
[    0.237777] pci 0000:00:14.0:   IO window: disabled
[    0.237786] pci 0000:00:14.0:   MEM window: disabled
[    0.237792] pci 0000:00:14.0:   PREFETCH window: 0x000000fbf00000-0x000000fbffffff
[    0.237810] pci 0000:00:08.0: setting latency timer to 64
[    0.237815] pci 0000:00:0b.0: setting latency timer to 64
[    0.238156] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[    0.238166] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[    0.238173] pci 0000:00:10.0: setting latency timer to 64
[    0.238470] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[    0.238477] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[    0.238484] pci 0000:00:12.0: setting latency timer to 64
[    0.238786] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[    0.238793] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
[    0.238800] pci 0000:00:13.0: setting latency timer to 64
[    0.239100] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16
[    0.239106] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16
[    0.239114] pci 0000:00:14.0: setting latency timer to 64
[    0.239120] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.239122] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.239124] pci_bus 0000:01: resource 1 mem: [0xfcf00000-0xfcffffff]
[    0.239126] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.239127] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.239129] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.239131] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfebfffff]
[    0.239133] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf9ffffff]
[    0.239135] pci_bus 0000:03: resource 2 pref mem [0xfbc00000-0xfbcfffff]
[    0.239137] pci_bus 0000:04: resource 2 pref mem [0xfbd00000-0xfbdfffff]
[    0.239139] pci_bus 0000:05: resource 2 pref mem [0xfbe00000-0xfbefffff]
[    0.239141] pci_bus 0000:06: resource 2 pref mem [0xfbf00000-0xfbffffff]
[    0.239187] NET: Registered protocol family 2
[    0.239261] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.239501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.240005] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.241047] TCP: Hash tables configured (established 131072 bind 65536)
[    0.241050] TCP reno registered
[    0.241167] NET: Registered protocol family 1
[    0.241220] Trying to unpack rootfs image as initramfs...
[    0.401190] Freeing initrd memory: 7601k freed
[    0.405731] cpufreq-nforce2: No nForce2 chipset.
[    0.405829] Scanning for low memory corruption every 60 seconds
[    0.406074] audit: initializing netlink socket (disabled)
[    0.406084] type=2000 audit(1263143362.404:1): initialized
[    0.408852] highmem bounce pool size: 64 pages
[    0.408858] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.408930] VFS: Disk quotas dquot_6.5.2
[    0.408955] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.409242] fuse init (API version 7.12)
[    0.409312] msgmni has been set to 1687
[    0.409464] alg: No test for stdrng (krng)
[    0.409474] io scheduler noop registered
[    0.409475] io scheduler anticipatory registered
[    0.409477] io scheduler deadline registered
[    0.409494] io scheduler cfq registered (default)
[    0.473689] pci 0000:00:07.0: Enabling HT MSI Mapping
[    0.473789] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.473893] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.474002] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.474111] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.474333] pci 0000:02:00.0: Boot video device
[    0.474756] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X
[    0.474777] pcieport-driver 0000:00:10.0: setting latency timer to 64
[    0.475234] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X
[    0.475254] pcieport-driver 0000:00:12.0: setting latency timer to 64
[    0.475653] pcieport-driver 0000:00:13.0: irq 26 for MSI/MSI-X
[    0.475671] pcieport-driver 0000:00:13.0: setting latency timer to 64
[    0.476065] pcieport-driver 0000:00:14.0: irq 27 for MSI/MSI-X
[    0.476083] pcieport-driver 0000:00:14.0: setting latency timer to 64
[    0.476313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.476405] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.476662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.476665] ACPI: Power Button [PWRF]
[    0.476741] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.476744] ACPI: Power Button [PWRB]
[    0.477116] processor LNXCPU:00: registered as cooling_device0
[    0.477175] processor LNXCPU:01: registered as cooling_device1
[    0.482109] isapnp: Scanning for PnP cards...
[    0.837702] isapnp: No Plug & Play device found
[    0.839974] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.840093] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.840566] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.842105] brd: module loaded
[    0.842678] loop: module loaded
[    0.842783] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.842907] ahci 0000:00:09.0: version 3.0
[    0.843271] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.843281] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.843314] ahci 0000:00:09.0: irq 28 for MSI/MSI-X
[    0.843382] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[    0.843384] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
[    0.843387] ahci 0000:00:09.0: setting latency timer to 64
[    0.843876] scsi0 : ahci
[    0.844080] scsi1 : ahci
[    0.844203] scsi2 : ahci
[    0.844289] scsi3 : ahci
[    0.844365] scsi4 : ahci
[    0.844440] scsi5 : ahci
[    0.844570] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 28
[    0.844572] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 28
[    0.844574] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 28
[    0.844576] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 28
[    0.844578] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 28
[    0.844580] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 28
[    0.845210] pata_amd 0000:00:06.0: version 0.4.1
[    0.845243] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.845334] scsi6 : pata_amd
[    0.845414] scsi7 : pata_amd
[    0.846418] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.846420] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.848671] Fixed MDIO Bus: probed
[    0.848795] PPP generic driver version 2.4.2
[    0.848982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.849349] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.849359] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.849373] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.849375] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.849452] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.849478] ehci_hcd 0000:00:02.1: debug port 1
[    0.849481] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.849514] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfce7ec00
[    0.855166] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.855349] usb usb1: configuration #1 chosen from 1 choice
[    0.855446] hub 1-0:1.0: USB hub found
[    0.855454] hub 1-0:1.0: 6 ports detected
[    0.855841] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[    0.855850] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[    0.855864] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    0.855866] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    0.855974] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    0.856018] ehci_hcd 0000:00:04.1: debug port 1
[    0.856022] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    0.856071] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfce7e800
[    0.861167] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.861352] usb usb2: configuration #1 chosen from 1 choice
[    0.861450] hub 2-0:1.0: USB hub found
[    0.861457] hub 2-0:1.0: 6 ports detected
[    0.861539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.861888] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[    0.861898] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[    0.861912] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.861915] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.862041] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    0.862092] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfce7f000
[    0.914329] usb usb3: configuration #1 chosen from 1 choice
[    0.914401] hub 3-0:1.0: USB hub found
[    0.914409] hub 3-0:1.0: 6 ports detected
[    0.914788] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[    0.914792] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[    0.914806] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    0.914808] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    0.914861] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[    0.914898] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfce7d000
[    0.968223] usb usb4: configuration #1 chosen from 1 choice
[    0.968295] hub 4-0:1.0: USB hub found
[    0.968304] hub 4-0:1.0: 6 ports detected
[    0.968376] uhci_hcd: USB Universal Host Controller Interface driver
[    0.968525] PNP: No PS/2 controller found. Probing ports directly.
[    0.971187] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.971194] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.971408] mice: PS/2 mouse device common for all mice
[    0.971575] rtc_cmos 00:05: RTC can wake from S4
[    0.971622] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.971685] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.971756] device-mapper: uevent: version 1.0.3
[    0.971817] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.971873] device-mapper: multipath: version 1.1.0 loaded
[    0.971875] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.971999] EISA: Probing bus 0 at eisa.0
[    0.972010] Cannot allocate resource for EISA slot 2
[    0.972026] EISA: Detected 0 cards.
[    0.972092] cpuidle: using governor ladder
[    0.972095] cpuidle: using governor menu
[    0.972543] TCP cubic registered
[    0.972592] NET: Registered protocol family 10
[    0.972928] lo: Disabled Privacy Extensions
[    0.973154] NET: Registered protocol family 17
[    0.973233] Bluetooth: L2CAP ver 2.13
[    0.973236] Bluetooth: L2CAP socket layer initialized
[    0.973238] Bluetooth: SCO (Voice Link) ver 0.6
[    0.973239] Bluetooth: SCO socket layer initialized
[    0.973270] Bluetooth: RFCOMM TTY layer initialized
[    0.973271] Bluetooth: RFCOMM socket layer initialized
[    0.973273] Bluetooth: RFCOMM ver 1.11
[    0.973286] powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor processors (2 cpu cores) (version 2.20.00)
[    0.973317] powernow-k8:    0 : pstate 0 (2800 MHz)
[    0.973319] powernow-k8:    1 : pstate 1 (2100 MHz)
[    0.973320] powernow-k8:    2 : pstate 2 (1600 MHz)
[    0.973321] powernow-k8:    3 : pstate 3 (800 MHz)
[    0.973460] Using IPI No-Shortcut mode
[    0.973571] PM: Resume from disk failed.
[    0.973579] registered taskstats version 1
[    0.973683]   Magic number: 10:139:188
[    0.973738] acpi device:1a: hash matches
[    0.973807] rtc_cmos 00:05: setting system clock to 2010-01-10 17:09:24 UTC (1263143364)
[    0.973809] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.973810] EDD information not available.
[    1.149172] ata6: SATA link down (SStatus 0 SControl 300)
[    1.149199] ata4: SATA link down (SStatus 0 SControl 300)
[    1.149210] ata5: SATA link down (SStatus 0 SControl 300)
[    1.150044] ata1: SATA link down (SStatus 0 SControl 300)
[    1.150067] ata2: SATA link down (SStatus 0 SControl 300)
[    1.183331] ata7.01: ATAPI: LITE-ON DVDRW SHW-16H5S, LS0W, max UDMA/66
[    1.183350] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
[    1.208278] ata7.01: configured for UDMA/66
[    1.302169] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.303216] ata3.00: ATA-8: ST3500418AS, CC35, max UDMA/133
[    1.303219] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.304406] ata3.00: configured for UDMA/133
[    1.304505] scsi 2:0:0:0: Direct-Access     ATA      ST3500418AS      CC35 PQ: 0 ANSI: 5
[    1.304784] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.304812] sd 2:0:0:0: [sda] Write Protect is off
[    1.304814] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.304828] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.304852] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.304939]  sda:
[    1.305721] scsi 6:0:1:0: CD-ROM            LITE-ON  DVDRW SHW-16H5S  LS0W PQ: 0 ANSI: 5
[    1.308210]  sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.309957] Uniform CD-ROM driver Revision: 3.20
[    1.310158] sr 6:0:1:0: Attached scsi CD-ROM sr0
[    1.310244] sr 6:0:1:0: Attached scsi generic sg1 type 5
[    1.310278] ata8: port disabled. ignoring.
[    1.331088]  sda5 >
[    1.331446] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.331461] Freeing unused kernel memory: 516k freed
[    1.331663] Write protecting the kernel text: 4620k
[    1.331687] Write protecting the kernel read-only data: 1852k
[    1.419857] usb 3-2: new low speed USB device using ohci_hcd and address 2
[    1.422709] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[    1.422883] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/device:1a/input/input3
[    1.422916] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    1.472108] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.472561] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    1.472566] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[    1.472571] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.525468] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:19:66:dd:bd:a9
[    1.525472] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[    1.607108] usb 3-2: configuration #1 chosen from 1 choice
[    1.616180] usbcore: registered new interface driver hiddev
[    1.622396] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input4
[    1.622456] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-2/input0
[    1.622471] usbcore: registered new interface driver usbhid
[    1.622473] usbhid: v2.6:USB HID core driver
[    1.877046] usb 3-3: new low speed USB device using ohci_hcd and address 3
[    2.083342] usb 3-3: configuration #1 chosen from 1 choice
[    2.099446] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input5
[    2.099499] generic-usb 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:02.0-3/input0
[    2.128330] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input6
[    2.128410] generic-usb 0003:04F2:0402.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:02.0-3/input1
[    2.262480] PM: Starting manual resume from disk
[    2.262485] PM: Resume from partition 8:5
[    2.262486] PM: Checking hibernation image.
[    2.262678] PM: Resume from disk failed.
[    2.296670] EXT4-fs (sda1): barriers enabled
[    2.310239] kjournald2 starting: pid 1058, dev sda1:8, commit interval 5 seconds
[    2.310260] EXT4-fs (sda1): delayed allocation enabled
[    2.310262] EXT4-fs: file extents enabled
[    2.362873] EXT4-fs: mballoc enabled
[    2.362886] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    2.497061] usb 4-3: new full speed USB device using ohci_hcd and address 2
[    2.677258] usb 4-3: configuration #1 chosen from 1 choice
[    2.810421] type=1505 audit(1263143366.336:2): operation="profile_load" pid=1083 name=/usr/share/gdm/guest-session/Xsession
[    2.812379] type=1505 audit(1263143366.338:3): operation="profile_load" pid=1084 name=/sbin/dhclient3
[    2.812592] type=1505 audit(1263143366.338:4): operation="profile_load" pid=1084 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    2.812712] type=1505 audit(1263143366.338:5): operation="profile_load" pid=1084 name=/usr/lib/connman/scripts/dhclient-script
[    2.822244] type=1505 audit(1263143366.348:6): operation="profile_load" pid=1085 name=/usr/bin/evince
[    2.825634] type=1505 audit(1263143366.351:7): operation="profile_load" pid=1085 name=/usr/bin/evince-previewer
[    2.827643] type=1505 audit(1263143366.353:8): operation="profile_load" pid=1085 name=/usr/bin/evince-thumbnailer
[    2.855260] type=1505 audit(1263143366.381:9): operation="profile_load" pid=1087 name=/usr/lib/cups/backend/cups-pdf
[    2.855524] type=1505 audit(1263143366.381:10): operation="profile_load" pid=1087 name=/usr/sbin/cupsd
[    3.807493] Adding 5277312k swap on /dev/sda5.  Priority:-1 extents:1 across:5277312k 
[    4.224308] udev: starting version 147
[    5.077446] EXT4-fs (sda1): internal journal on sda1:8
[    5.532958] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.045595] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[    6.045600] ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f]
[    6.045603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.045605] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[    6.051155] cfg80211: Calling CRDA to update world regulatory domain
[    6.250454] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.850788] usbcore: registered new interface driver snd-usb-usx2y
[    6.856917] lp: driver loaded but no devices found
[    6.985235] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[    6.985566] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[    6.985570] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[    6.985626] HDA Intel 0000:00:07.0: setting latency timer to 64
[    7.353169] __ratelimit: 3 callbacks suppressed
[    7.353172] type=1505 audit(1263143370.878:12): operation="profile_replace" pid=1487 name=/usr/share/gdm/guest-session/Xsession
[    7.354587] type=1505 audit(1263143370.879:13): operation="profile_replace" pid=1488 name=/sbin/dhclient3
[    7.354803] type=1505 audit(1263143370.879:14): operation="profile_replace" pid=1488 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    7.354926] type=1505 audit(1263143370.879:15): operation="profile_replace" pid=1488 name=/usr/lib/connman/scripts/dhclient-script
[    7.359146] type=1505 audit(1263143370.883:16): operation="profile_replace" pid=1489 name=/usr/bin/evince
[    7.362727] type=1505 audit(1263143370.887:17): operation="profile_replace" pid=1489 name=/usr/bin/evince-previewer
[    7.364959] type=1505 audit(1263143370.889:18): operation="profile_replace" pid=1489 name=/usr/bin/evince-thumbnailer
[    7.369623] type=1505 audit(1263143370.894:19): operation="profile_replace" pid=1491 name=/usr/lib/cups/backend/cups-pdf
[    7.369887] type=1505 audit(1263143370.894:20): operation="profile_replace" pid=1491 name=/usr/sbin/cupsd
[    7.372621] type=1505 audit(1263143370.897:21): operation="profile_replace" pid=1492 name=/usr/sbin/tcpdump
[    7.528183] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS...
[    7.534242] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input7
[    7.875352] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[    7.875358] rt61pci 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[    8.249410] phy0: Selected rate control algorithm 'minstrel'
[    8.249897] Registered led device: rt61pci-phy0::radio
[    8.249910] Registered led device: rt61pci-phy0::assoc
[    9.709998] ppdev: user-space parallel port driver
[   12.833709] CPU0 attaching NULL sched-domain.
[   12.833714] CPU1 attaching NULL sched-domain.
[   12.874206] CPU0 attaching sched-domain:
[   12.874210]  domain 0: span 0-1 level MC
[   12.874213]   groups: 0 1
[   12.874216]   domain 1: span 0-1 level CPU
[   12.874217]    groups: 0-1 (__cpu_power = 2048)
[   12.874221] CPU1 attaching sched-domain:
[   12.874223]  domain 0: span 0-1 level MC
[   12.874224]   groups: 1 0
[   12.874226]   domain 1: span 0-1 level CPU
[   12.874228]    groups: 0-1 (__cpu_power = 2048)
[   16.310323] CPU0 attaching NULL sched-domain.
[   16.310328] CPU1 attaching NULL sched-domain.
[   16.354175] CPU0 attaching sched-domain:
[   16.354179]  domain 0: span 0-1 level MC
[   16.354182]   groups: 0 1
[   16.354186] CPU1 attaching sched-domain:
[   16.354188]  domain 0: span 0-1 level MC
[   16.354189]   groups: 1 0
james@ubuntuJames:~$

hopefully this is relevant. also, my kernel version is 2.6.31-9-rt.

thanks

[schwim]

Heya Jay,

On my new Ubuntu install, I was unable to use my wireless network adapter until I updated everything. Connect using a wired connection, update via the package manager and see if your adapter shows up afterwards. It saves A BUNCH of unnecessary troubleshooting if it does.