Linux mint wont connect to the internet.

**GrandDesign** · 02-05-2010

Hello, I am a first time linux user and have recently installed Linux Mint onto my dell inspiron 1525. When i connect the Ethernet cable to my computer the two computers symbol in the bottom right hand corner starts searching for a connection, but unfortunetly does not find one. it says "no network connection". one thing that is strange to me but might not be to you is that i have installed fedora 12, 10, and 6, and all distros had the same exact problem.....i take the cable out of the laptop with linux and put it back in my desktop with xp pro and it works fine.......also my wireless 1395 card isnt recognized but thats an entirley different pain in the *** ill work on one problem at a time.....

thanks in advance

**reed9** · 02-05-2010

Plug in the cable, open a terminal and post the output of

Code:

dmesg | tail
lspci -vnn
lsmod

**GrandDesign** · 02-05-2010

dillon-laptop dillon # dmesg l tail
Usage: dmesg [-c] [-n level] [-s bufsize]
dillon-laptop dillon # lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:022f]
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
Subsystem: Dell Device [1028:022f]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at eff8 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [d0] Power Management version 3
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:022f]
Flags: bus master, fast devsel, latency 0
Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 22
Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Dell Device [1028:022f]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Dell Device [1028:022f]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe400000-fe6fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Dell Device [1028:022f]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: fe300000-fe3fffff
Capabilities: [50] Subsystem: Dell Device [1028:022f]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 6fa0 [size=16]
Kernel driver in use: ata_piix

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01)
Subsystem: Dell Device [1028:022f]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
I/O ports at 6eb0 [size=8]
I/O ports at 6eb8 [size=4]
I/O ports at 6ec0 [size=8]
I/O ports at 6ec8 [size=4]
I/O ports at 6ee0 [size=32]
Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA <?>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:022f]
Flags: medium devsel, IRQ 10
Memory at fe9fb700 (32-bit, non-prefetchable) [size=256]
I/O ports at 10c0 [size=32]
Kernel modules: i2c-i801

02:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at fe3ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fe3ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

02:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at fe3ff500 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc

02:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Dell Device [1028:022f]
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at fe3ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

02:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f

09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
Subsystem: Dell Device [1028:022f]
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at de00 [size=256]
Capabilities: [48] Power Management version 3
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [c0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [130] Device Serial Number 00-21-9b-ff-ff-d2-92-41
Kernel driver in use: sky2
Kernel modules: sky2

0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Subsystem: Dell Device [1028:000b]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fe7fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information <?>
Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [13c] Virtual Channel <?>
Capabilities: [160] Device Serial Number 1f-00-cf-ff-ff-e1-0b-da
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb

dillon-laptop dillon # lsmod
Module Size Used by
nls_iso8859_1 3740 1
nls_cp437 5372 1
vfat 10716 1
fat 51452 1 vfat
usb_storage 52544 2
nls_utf8 1568 2
isofs 31620 2
binfmt_misc 8356 1
ppdev 6688 0
dm_crypt 12928 0
snd_hda_codec_idt 59844 1
snd_hda_codec_intelhdmi 12860 1
snd_hda_intel 26920 2
snd_hda_codec 75708 3 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_ intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
b43 122136 0
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
mac80211 181236 1 b43
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 59204 17 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_ intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixe r_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ timer,snd_seq_device
joydev 10272 0
iptable_filter 3100 0
cfg80211 93052 2 b43,mac80211
psmouse 56180 0
dell_wmi 2564 0
ip_tables 11692 1 iptable_filter
sdhci_pci 7100 0
serio_raw 5280 0
sdhci 17472 1 sdhci_pci
dell_laptop 8128 0
ricoh_mmc 3676 0
soundcore 7264 1 snd
lp 8964 0
dcdbas 7292 1 dell_laptop
led_class 4096 2 b43,sdhci
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
x_tables 16544 1 ip_tables
parport 35340 2 ppdev,lp
dm_raid45 84228 0
xor 15620 1 dm_raid45
fbcon 36640 72
tileblit 2460 1 fbcon
font 8124 1 fbcon
bitblit 5372 1 fbcon
softcursor 1756 1 bitblit
ohci1394 29900 0
ssb 35300 1 b43
ieee1394 86596 1 ohci1394
sky2 46560 0
i915 221064 3
drm 159584 3 i915
i2c_algo_bit 5760 1 i915
intel_agp 27484 2 i915
agpgart 34988 2 drm,intel_agp
video 19380 1 i915
output 2780 1 video
dillon-laptop dillon #

**reed9** · 02-05-2010

dillon-laptop dillon # dmesg l tail

The middle character here should be the pipe key, usually located right above enter on your keyboard. It might be a solid line or it might be two vertical dashes on the key. Not l but |

But actually, go ahead and just do

Code:

dmesg > dmesg.txt

to create a text file, dmesg.txt, in your current working directory. Post or attach that.

And please enclose the output of commands in code tags. it makes it easier to read.

Once we can figure out the wired, the wireless will be easy enough to get working. Or if you want to try and get that working first, you can do it the slightly more involved way.

This thread has links to the required packages. Download those to a USB stick, transfer them over to your Mint box, double click to install.

**GrandDesign** · 02-05-2010

Ok, hello again. When I type in the command you told me to it just brought me back to

Code:

dillon-laptop dillon #

I dont know if I posted it as a code but will find out in a second.

Thanks

**GrandDesign** · 02-05-2010

I gotta tell ya, I honestly did not think that it would work. Thank you so much.
The wired connection still will not work. What should I do for that?

**reed9** · 02-05-2010

Originally Posted by GrandDesign

Ok, hello again. When I type in the command you told me to it just brought me back to

Code:

dillon-laptop dillon #

I dont know if I posted it as a code but will find out in a second.

Thanks

It won't return anything, but if you look in your home folder, you should now have a file called dmesg.txt with the output of the command. Please post that.

**GrandDesign** · 02-05-2010

Code:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f66d800 (usable)
[    0.000000]  BIOS-e820: 000000007f66d800 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7f66d max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f66d800 (usable)
[    0.000000]  modified: 000000007f66d800 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 3781d000 - 37fef6cb
[    0.000000] Allocated new RAMDISK: 008ad000 - 0107f6cb
[    0.000000] Move RAMDISK from 000000003781d000 - 0000000037fef6ca to 008ad000 - 0107f6ca
[    0.000000] ACPI: RSDP 000fbc60 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 7f66f200 00064 (v01 DELL    M08     27D8030A ASL  00000061)
[    0.000000] ACPI: FACP 7f66f09c 000F4 (v04 DELL    M08     27D8030A ASL  00000061)
[    0.000000] ACPI: DSDT 7f66f800 05495 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 7f67e000 00040
[    0.000000] ACPI: HPET 7f66f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
[    0.000000] ACPI: APIC 7f66f400 00068 (v01 DELL    M08     27D8030A ASL  00000047)
[    0.000000] ACPI: MCFG 7f66f3c0 0003E (v16 DELL    M08     27D8030A ASL  00000061)
[    0.000000] ACPI: SLIC 7f66f49c 00176 (v01 DELL    M08     27D8030A ASL  00000061)
[    0.000000] ACPI: OSFR 7f66ea00 0008A (v01 DELL    M08     27D8030A ASL  00000061)
[    0.000000] ACPI: BOOT 7f66efc0 00028 (v01 DELL    M08     27D8030A ASL  00000061)
[    0.000000] ACPI: SSDT 7f66d9c0 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [00008a9000 - 00008ac184]              BRK ==> [00008a9000 - 00008ac184]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008ad000 - 000107f6cb]      NEW RAMDISK ==> [00008ad000 - 000107f6cb]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f66d
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f66d
[    0.000000] On node 0 totalpages: 521736
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1080000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 292210 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c207a000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517659
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=18fae798-7b6a-4704-bcbc-e0aecf2795ff ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10436740 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f66d)
[    0.000000] Memory: 2042732k/2087348k available (4565k kernel code, 43360k reserved, 2143k data, 540k init, 1178044k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1862.014 MHz processor.
[    0.001534] Console: colour VGA+ 80x25
[    0.001538] console [tty0] enabled
[    0.001718] hpet clockevent registered
[    0.001722] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.001729] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.02 BogoMIPS (lpj=7448056)
[    0.001750] Security Framework initialized
[    0.001774] AppArmor: AppArmor initialized
[    0.001782] Mount-cache hash table entries: 512
[    0.001932] Initializing cgroup subsys ns
[    0.001938] Initializing cgroup subsys cpuacct
[    0.001943] Initializing cgroup subsys memory
[    0.001950] Initializing cgroup subsys freezer
[    0.001952] Initializing cgroup subsys net_cls
[    0.001969] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001972] CPU: L2 cache: 1024K
[    0.001975] CPU: Physical Processor ID: 0
[    0.001976] CPU: Processor Core ID: 0
[    0.001981] mce: CPU supports 6 MCE banks
[    0.001990] CPU0: Thermal monitoring enabled (TM2)
[    0.001994] using mwait in idle threads.
[    0.002002] Performance Counters: Core2 events, Intel PMU driver.
[    0.002011] ... version:                 2
[    0.002013] ... bit width:               40
[    0.002015] ... generic counters:        2
[    0.002017] ... value mask:              000000ffffffffff
[    0.002019] ... max period:              000000007fffffff
[    0.002020] ... fixed-purpose counters:  3
[    0.002022] ... counter mask:            0000000700000003
[    0.002027] Checking 'hlt' instruction... OK.
[    0.018770] ACPI: Core revision 20090521
[    0.032415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072110] CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
[    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3723.93 BogoMIPS (lpj=7447879)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 1024K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] mce: CPU supports 6 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.161471] CPU1: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
[    0.161488] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.164025] Brought up 2 CPUs
[    0.164028] Total of 2 processors activated (7447.96 BogoMIPS).
[    0.164083] CPU0 attaching sched-domain:
[    0.164086]  domain 0: span 0-1 level MC
[    0.164089]   groups: 0 1
[    0.164095] CPU1 attaching sched-domain:
[    0.164097]  domain 0: span 0-1 level MC
[    0.164100]   groups: 1 0
[    0.164184] Booting paravirtualized kernel on bare hardware
[    0.164230] regulator: core version 0.5
[    0.164230] Time: 19:11:30  Date: 02/05/10
[    0.164230] NET: Registered protocol family 16
[    0.164237] EISA bus registered
[    0.164247] ACPI: bus type pci registered
[    0.164323] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.164326] PCI: MCFG area at f8000000 reserved in E820
[    0.164328] PCI: Using MMCONFIG for extended config space
[    0.164330] PCI: Using configuration type 1 for base access
[    0.165444] bio: create slab <bio-0> at 0
[    0.168595] ACPI: EC: Look up EC in DSDT
[    0.168809] ACPI: BIOS _OSI(Linux) query ignored
[    0.194511] ACPI: Interpreter enabled
[    0.194518] ACPI: (supports S0 S3 S4 S5)
[    0.194539] ACPI: Using IOAPIC for interrupt routing
[    0.238701] ACPI: No dock devices found.
[    0.257819] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.257941] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
[    0.257951] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[    0.257957] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
[    0.258010] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
[    0.258149] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
[    0.258227] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
[    0.258314] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[    0.258390] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.258397] pci 0000:00:1a.7: PME# disabled
[    0.258463] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[    0.258537] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.258542] pci 0000:00:1b.0: PME# disabled
[    0.258647] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.258653] pci 0000:00:1c.0: PME# disabled
[    0.258761] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.258767] pci 0000:00:1c.1: PME# disabled
[    0.258878] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.258884] pci 0000:00:1c.4: PME# disabled
[    0.258963] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
[    0.259041] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
[    0.259122] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[    0.259207] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[    0.259283] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.259290] pci 0000:00:1d.7: PME# disabled
[    0.259489] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.259494] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[    0.259499] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.259504] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
[    0.259509] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.259572] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[    0.259582] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[    0.259592] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[    0.259601] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[    0.259611] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
[    0.259700] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
[    0.259709] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
[    0.259719] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
[    0.259728] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
[    0.259737] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
[    0.259747] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff]
[    0.259798] pci 0000:00:1f.2: PME# supported from D3hot
[    0.259804] pci 0000:00:1f.2: PME# disabled
[    0.259843] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff]
[    0.259874] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
[    0.260006] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
[    0.260019] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff]
[    0.260120] pci 0000:09:00.0: supports D1 D2
[    0.260122] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.260130] pci 0000:09:00.0: PME# disabled
[    0.260223] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[    0.260229] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.260452] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fc000-0xfe7fffff]
[    0.260685] pci 0000:0b:00.0: supports D1 D2
[    0.260688] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[    0.260700] pci 0000:0b:00.0: PME# disabled
[    0.260855] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[    0.260935] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[    0.260940] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff]
[    0.260950] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[    0.261021] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff]
[    0.261093] pci 0000:02:09.0: supports D1 D2
[    0.261095] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261101] pci 0000:02:09.0: PME# disabled
[    0.261153] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff]
[    0.261225] pci 0000:02:09.1: supports D1 D2
[    0.261227] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261233] pci 0000:02:09.1: PME# disabled
[    0.261284] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff]
[    0.261355] pci 0000:02:09.2: supports D1 D2
[    0.261358] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261363] pci 0000:02:09.2: PME# disabled
[    0.261414] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff]
[    0.261485] pci 0000:02:09.3: supports D1 D2
[    0.261487] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261493] pci 0000:02:09.3: PME# disabled
[    0.261543] pci 0000:02:09.4: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff]
[    0.261614] pci 0000:02:09.4: supports D1 D2
[    0.261616] pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.261622] pci 0000:02:09.4: PME# disabled
[    0.261687] pci 0000:00:1e.0: transparent bridge
[    0.261696] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[    0.261735] pci_bus 0000:00: on NUMA node 0
[    0.261741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.262026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.262165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.262244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.262329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.275118] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.275250] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.275380] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[    0.275493] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[    0.275624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.275757] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.275889] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.276017] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.276232] SCSI subsystem initialized
[    0.276266] libata version 3.00 loaded.
[    0.276266] usbcore: registered new interface driver usbfs
[    0.276266] usbcore: registered new interface driver hub
[    0.276266] usbcore: registered new device driver usb
[    0.276266] ACPI: WMI: Mapper loaded
[    0.276266] PCI: Using ACPI for IRQ routing
[    0.288010] Bluetooth: Core ver 2.15
[    0.288027] NET: Registered protocol family 31
[    0.288027] Bluetooth: HCI device and connection manager initialized
[    0.288027] Bluetooth: HCI socket layer initialized
[    0.288027] NetLabel: Initializing
[    0.288027] NetLabel:  domain hash size = 128
[    0.288027] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.288037] NetLabel:  unlabeled traffic allowed by default
[    0.288075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.288081] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.304014] pnp: PnP ACPI init
[    0.304039] ACPI: bus type pnp registered
[    0.324169] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.324173] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.324273] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.324277] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.324281] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.324284] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.346278] pnp: PnP ACPI: found 13 devices
[    0.346281] ACPI: ACPI bus type pnp unregistered
[    0.346285] PnPBIOS: Disabled by ACPI PNP
[    0.346298] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
[    0.346302] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
[    0.346311] system 00:06: ioport range 0xc80-0xcff could not be reserved
[    0.346319] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.346325] system 00:0a: ioport range 0x900-0x97f has been reserved
[    0.346328] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.346335] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[    0.346338] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[    0.346341] system 00:0b: ioport range 0x10c0-0x10df has been reserved
[    0.346344] system 00:0b: ioport range 0x809-0x809 has been reserved
[    0.346351] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[    0.346354] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[    0.346358] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.346361] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.346364] system 00:0c: iomem range 0x100000-0x7f66d7ff could not be reserved
[    0.346367] system 00:0c: iomem range 0x7f66d800-0x7f6fffff has been reserved
[    0.346374] system 00:0c: iomem range 0x7f700000-0x7f7fffff has been reserved
[    0.346378] system 00:0c: iomem range 0x7f700000-0x7fefffff could not be reserved
[    0.346381] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
[    0.346384] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[    0.346387] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.346390] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.346393] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.346397] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[    0.346400] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[    0.346403] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[    0.346406] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.346409] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[    0.346412] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.381117] AppArmor: AppArmor Filesystem Enabled
[    0.381189] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
[    0.381194] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
[    0.381201] pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
[    0.381207] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.381213] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b
[    0.381215] pci 0000:00:1c.1:   IO window: disabled
[    0.381222] pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
[    0.381228] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.381233] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c
[    0.381238] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
[    0.381245] pci 0000:00:1c.4:   MEM window: 0xfe400000-0xfe6fffff
[    0.381251] pci 0000:00:1c.4:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
[    0.381261] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.381263] pci 0000:00:1e.0:   IO window: disabled
[    0.381270] pci 0000:00:1e.0:   MEM window: 0xfe300000-0xfe3fffff
[    0.381276] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.381293]   alloc irq_desc for 16 on node -1
[    0.381295]   alloc kstat_irqs on node -1
[    0.381302] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.381310] pci 0000:00:1c.0: setting latency timer to 64
[    0.381320]   alloc irq_desc for 17 on node -1
[    0.381322]   alloc kstat_irqs on node -1
[    0.381326] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.381331] pci 0000:00:1c.1: setting latency timer to 64
[    0.381342] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.381347] pci 0000:00:1c.4: setting latency timer to 64
[    0.381357] pci 0000:00:1e.0: setting latency timer to 64
[    0.381363] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.381366] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.381368] pci_bus 0000:09: resource 0 io:  [0xd000-0xdfff]
[    0.381371] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.381374] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff]
[    0.381377] pci_bus 0000:0c: resource 0 io:  [0xc000-0xcfff]
[    0.381379] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff]
[    0.381382] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff]
[    0.381385] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff]
[    0.381388] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.381390] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.381432] NET: Registered protocol family 2
[    0.381538] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.381906] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.382429] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.382786] TCP: Hash tables configured (established 131072 bind 65536)
[    0.382789] TCP reno registered
[    0.382916] NET: Registered protocol family 1
[    0.382996] Trying to unpack rootfs image as initramfs...
[    0.501516] Switched to high resolution mode on CPU 1
[    0.504000] Switched to high resolution mode on CPU 0
[    0.599358] Freeing initrd memory: 8009k freed
[    0.605134] Simple Boot Flag at 0x79 set to 0x1
[    0.605340] cpufreq-nforce2: No nForce2 chipset.
[    0.605372] Scanning for low memory corruption every 60 seconds
[    0.605490] audit: initializing netlink socket (disabled)
[    0.605514] type=2000 audit(1265397090.604:1): initialized
[    0.614708] highmem bounce pool size: 64 pages
[    0.614714] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.616332] VFS: Disk quotas dquot_6.5.2
[    0.616404] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.616993] fuse init (API version 7.12)
[    0.617082] msgmni has been set to 1706
[    0.617311] alg: No test for stdrng (krng)
[    0.617326] io scheduler noop registered
[    0.617328] io scheduler anticipatory registered
[    0.617330] io scheduler deadline registered
[    0.617376] io scheduler cfq registered (default)
[    0.617391] pci 0000:00:02.0: Boot video device
[    0.617708]   alloc irq_desc for 24 on node -1
[    0.617711]   alloc kstat_irqs on node -1
[    0.617724] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.617738] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.617920]   alloc irq_desc for 25 on node -1
[    0.617922]   alloc kstat_irqs on node -1
[    0.617932] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.617945] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.618129]   alloc irq_desc for 26 on node -1
[    0.618131]   alloc kstat_irqs on node -1
[    0.618142] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.618154] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.618276] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.618382] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.618552] ACPI: AC Adapter [AC] (on-line)
[    0.618633] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.619314] ACPI: Lid Switch [LID]
[    0.619363] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.619370] ACPI: Power Button [PBTN]
[    0.619417] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.619420] ACPI: Sleep Button [SBTN]
[    0.620137] ACPI: SSDT 7f66e4f6 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.620690] ACPI: SSDT 7f66de8c 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.621098] Monitor-Mwait will be used to enter C-1 state
[    0.621128] Monitor-Mwait will be used to enter C-2 state
[    0.621153] Monitor-Mwait will be used to enter C-3 state
[    0.621161] Marking TSC unstable due to TSC halts in idle
[    0.621183] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.621211] processor LNXCPU:00: registered as cooling_device0
[    0.621215] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.621581] ACPI: SSDT 7f66e77c 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.621928] ACPI: SSDT 7f66e471 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.622447] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.622475] processor LNXCPU:01: registered as cooling_device1
[    0.622479] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.624379] thermal LNXTHERM:01: registered as thermal_zone0
[    0.624391] ACPI: Thermal Zone [THM] (25 C)
[    0.624459] isapnp: Scanning for PnP cards...
[    0.745821] ACPI: Battery Slot [BAT0] (battery present)
[    0.981203] isapnp: No Plug & Play device found
[    0.982426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.983902] brd: module loaded
[    0.984391] loop: module loaded
[    0.984473] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.984555] ahci 0000:00:1f.2: version 3.0
[    0.984572] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.984614]   alloc irq_desc for 27 on node -1
[    0.984616]   alloc kstat_irqs on node -1
[    0.984630] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    0.984710] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    0.984714] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
[    0.984720] ahci 0000:00:1f.2: setting latency timer to 64
[    0.993093] scsi0 : ahci
[    0.993204] scsi1 : ahci
[    0.993275] scsi2 : ahci
[    0.993521] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 27
[    0.993524] ata2: DUMMY
[    0.993528] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 27
[    0.993590] ata_piix 0000:00:1f.1: version 2.13
[    0.993600] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.993647] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.993735] scsi3 : ata_piix
[    0.993807] scsi4 : ata_piix
[    0.994452] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    0.994456] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    0.995460] Fixed MDIO Bus: probed
[    0.995497] PPP generic driver version 2.4.2
[    0.995611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.995634]   alloc irq_desc for 22 on node -1
[    0.995636]   alloc kstat_irqs on node -1
[    0.995643] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.995660] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.995664] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.995720] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.999643] ehci_hcd 0000:00:1a.7: debug port 1
[    0.999651] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.999667] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.003819] ata5: port disabled. ignoring.
[    1.013014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.013099] usb usb1: configuration #1 chosen from 1 choice
[    1.013131] hub 1-0:1.0: USB hub found
[    1.013140] hub 1-0:1.0: 4 ports detected
[    1.013208]   alloc irq_desc for 20 on node -1
[    1.013211]   alloc kstat_irqs on node -1
[    1.013217] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.013229] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.013233] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.013268] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.017191] ehci_hcd 0000:00:1d.7: debug port 1
[    1.017198] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.017214] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.032019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.032088] usb usb2: configuration #1 chosen from 1 choice
[    1.032117] hub 2-0:1.0: USB hub found
[    1.032124] hub 2-0:1.0: 6 ports detected
[    1.032196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.032219] uhci_hcd: USB Universal Host Controller Interface driver
[    1.032257] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.032265] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.032269] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.032309] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.032339] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    1.032425] usb usb3: configuration #1 chosen from 1 choice
[    1.032454] hub 3-0:1.0: USB hub found
[    1.032462] hub 3-0:1.0: 2 ports detected
[    1.032517]   alloc irq_desc for 21 on node -1
[    1.032520]   alloc kstat_irqs on node -1
[    1.032526] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.032533] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.032537] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.032569] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.032607] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    1.032693] usb usb4: configuration #1 chosen from 1 choice
[    1.032721] hub 4-0:1.0: USB hub found
[    1.032729] hub 4-0:1.0: 2 ports detected
[    1.032785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.032793] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.032797] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.032829] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.032858] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    1.032945] usb usb5: configuration #1 chosen from 1 choice
[    1.032975] hub 5-0:1.0: USB hub found
[    1.032982] hub 5-0:1.0: 2 ports detected
[    1.033049] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.033057] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.033061] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.033094] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.033123] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    1.033212] usb usb6: configuration #1 chosen from 1 choice
[    1.033244] hub 6-0:1.0: USB hub found
[    1.033252] hub 6-0:1.0: 2 ports detected
[    1.033304] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.033311] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.033315] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.033347] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.033377] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.033472] usb usb7: configuration #1 chosen from 1 choice
[    1.033499] hub 7-0:1.0: USB hub found
[    1.033506] hub 7-0:1.0: 2 ports detected
[    1.033622] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.052414] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.063245] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.063251] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.063254] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.063257] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.063260] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.063323] mice: PS/2 mouse device common for all mice
[    1.063439] rtc_cmos 00:04: RTC can wake from S4
[    1.063475] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.063510] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.063621] device-mapper: uevent: version 1.0.3
[    1.063935] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.064053] device-mapper: multipath: version 1.1.0 loaded
[    1.064055] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.064187] EISA: Probing bus 0 at eisa.0
[    1.064196] Cannot allocate resource for EISA slot 1
[    1.064228] EISA: Detected 0 cards.
[    1.064398] cpuidle: using governor ladder
[    1.064530] cpuidle: using governor menu
[    1.065091] TCP cubic registered
[    1.065255] NET: Registered protocol family 10
[    1.065746] lo: Disabled Privacy Extensions
[    1.066113] NET: Registered protocol family 17
[    1.066134] Bluetooth: L2CAP ver 2.13
[    1.066136] Bluetooth: L2CAP socket layer initialized
[    1.066139] Bluetooth: SCO (Voice Link) ver 0.6
[    1.066140] Bluetooth: SCO socket layer initialized
[    1.066170] Bluetooth: RFCOMM TTY layer initialized
[    1.066173] Bluetooth: RFCOMM socket layer initialized
[    1.066176] Bluetooth: RFCOMM ver 1.11
[    1.066786] Using IPI No-Shortcut mode
[    1.066860] PM: Resume from disk failed.
[    1.066875] registered taskstats version 1
[    1.067019]   Magic number: 14:979:191
[    1.067071] acpi device:1d: hash matches
[    1.067133] rtc_cmos 00:04: setting system clock to 2010-02-05 19:11:31 UTC (1265397091)
[    1.067137] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.067139] EDD information not available.
[    1.087804] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.223277] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
[    1.284385] ata4.00: configured for UDMA/33
[    1.328079] ata3: SATA link down (SStatus 0 SControl 300)
[    1.328110] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.329298] ata1.00: ATA-8: ST9320320AS, SD03, max UDMA/133
[    1.329302] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32)
[    1.330800] ata1.00: configured for UDMA/133
[    1.344218] scsi 0:0:0:0: Direct-Access     ATA      ST9320320AS      SD03 PQ: 0 ANSI: 5
[    1.344357] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.344403] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.344454] sd 0:0:0:0: [sda] Write Protect is off
[    1.344457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.344482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.344625]  sda:
[    1.371778] scsi 3:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5
[    1.500040] Clocksource tsc unstable (delta = -197369805 ns)
[    1.544863] sr0: scsi3-mmc drive: 47x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.544866] Uniform CD-ROM driver Revision: 3.20
[    1.544961] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.545007] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.576647]  sda1
[    1.576864] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.576896] Freeing unused kernel memory: 540k freed
[    1.577298] Write protecting the kernel text: 4568k
[    1.577359] Write protecting the kernel read-only data: 1836k
[    1.708921] Linux agpgart interface v0.103
[    1.712130] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    1.712556] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    1.716121] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.821324] [drm] Initialized drm 1.1.0 20060810
[    1.835279] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.835287] i915 0000:00:02.0: setting latency timer to 64
[    1.838466]   alloc irq_desc for 28 on node -1
[    1.838470]   alloc kstat_irqs on node -1
[    1.838481] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[    1.840813] sky2 driver version 1.23
[    1.840863] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.840878] sky2 0000:09:00.0: setting latency timer to 64
[    1.840913] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    1.841034]   alloc irq_desc for 29 on node -1
[    1.841036]   alloc kstat_irqs on node -1
[    1.841056] sky2 0000:09:00.0: irq 29 for MSI/MSI-X
[    1.856042] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.856061] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
[    1.859165] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.861050] sky2 eth0: addr 00:21:9b:d2:92:41
[    1.918057] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fe3ff800-fe3fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.924156] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
[    2.813550] [drm] TV-17: set mode NTSC 480i 0
[    2.955088] [drm] fb0: inteldrmfb frame buffer device
[    2.968120] acpi device:31: registered as cooling_device2
[    2.968508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/input/input5
[    2.968541] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    2.968592] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
[    2.968668] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input6
[    2.968694] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[    2.968716] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.049932] [drm] LVDS-8: set mode 1280x800 c
[    3.217153] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc0002794d5a1]
[    3.302630] Console: switching to colour frame buffer device 160x50
[    3.509700] xor: automatically using best checksumming function: pIII_sse
[    3.528009]    pIII_sse  :  6831.000 MB/sec
[    3.528012] xor: using function: pIII_sse (6831.000 MB/sec)
[    3.530577] device-mapper: dm-raid45: initialized v0.2594b
[    9.367643] EXT4-fs (sda1): barriers enabled
[    9.396535] kjournald2 starting: pid 472, dev sda1:8, commit interval 5 seconds
[    9.396555] EXT4-fs (sda1): delayed allocation enabled
[    9.396558] EXT4-fs: file extents enabled
[    9.424334] EXT4-fs: mballoc enabled
[    9.424351] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   11.035191] udev: starting version 147
[   12.556728] EXT4-fs (sda1): internal journal on sda1:8
[   12.776483] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   12.865354] ricoh-mmc: Ricoh MMC Controller disabling driver
[   12.865358] ricoh-mmc: Copyright(c) Philip Langdale
[   12.865400] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
[   12.865422] ricoh-mmc: Controller is now disabled.
[   12.945019] sdhci: Secure Digital Host Controller Interface driver
[   12.945023] sdhci: Copyright(c) Pierre Ossman
[   12.951827] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
[   12.951852]   alloc irq_desc for 18 on node -1
[   12.951855]   alloc kstat_irqs on node -1
[   12.951864] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   12.953953] Registered led device: mmc0::
[   12.954988] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
[   12.974386] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.006749] input: Dell WMI hotkeys as /devices/virtual/input/input7
[   13.131669] lp: driver loaded but no devices found
[   13.148470] cfg80211: Calling CRDA to update world regulatory domain
[   13.467397] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input8
[   13.493460] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input9
[   14.682726] cfg80211: World regulatory domain updated:
[   14.682731] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.682734] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.682737] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.682739] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.682742] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.682745] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.279100] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   15.324082] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
[   15.324235] b43: probe of ssb0:0 failed with error -95
[   15.324275] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[   16.508797] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   16.508832] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.805025] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x20af000e
[   17.805470] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   18.029222] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.029314] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.029384] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   19.723487] sky2 eth0: enabling interface
[   19.723705] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.997155] [drm] TV-17: set mode NTSC 480i 0
[   22.162379] [drm] TV-17: set mode NTSC 480i 0
[   22.517260] [drm] TV-17: set mode NTSC 480i 0
[   22.685158] [drm] TV-17: set mode NTSC 480i 0
[   27.062146] ppdev: user-space parallel port driver
[   29.569494] [drm] TV-17: set mode NTSC 480i 0
[   29.737538] [drm] TV-17: set mode NTSC 480i 0
[   30.068898] [drm] TV-17: set mode NTSC 480i 0
[   30.234864] [drm] TV-17: set mode NTSC 480i 0
[   30.592832] [drm] TV-17: set mode NTSC 480i 0
[   30.762781] [drm] TV-17: set mode NTSC 480i 0
[   32.608453] [drm] TV-17: set mode NTSC 480i 0
[   32.773578] [drm] TV-17: set mode NTSC 480i 0
[   44.784102] ISO 9660 Extensions: Microsoft Joliet Level 3
[   44.849988] ISO 9660 Extensions: RRIP_1991A
[  195.892095] usb 5-2: new full speed USB device using uhci_hcd and address 2
[  196.034149] usb 5-2: not running at top speed; connect to a high speed hub
[  196.055328] usb 5-2: configuration #1 chosen from 1 choice
[  196.177801] Initializing USB Mass Storage driver...
[  196.179202] scsi5 : SCSI emulation for USB Mass Storage devices
[  196.179500] usb-storage: device found at 2
[  196.179507] usb-storage: waiting for device to settle before scanning
[  196.179523] usbcore: registered new interface driver usb-storage
[  196.179531] USB Mass Storage support registered.
[  201.178276] usb-storage: device scan complete
[  201.181395] scsi 5:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[  201.184258] scsi 5:0:0:1: CD-ROM            SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0
[  201.186440] sd 5:0:0:0: Attached scsi generic sg2 type 0
[  201.203227] sd 5:0:0:0: [sdb] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
[  201.211178] sd 5:0:0:0: [sdb] Write Protect is off
[  201.211187] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 08
[  201.211193] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  201.214205] sr1: scsi3-mmc drive: 48x/48x tray
[  201.214439] sr 5:0:0:1: Attached scsi CD-ROM sr1
[  201.214586] sr 5:0:0:1: Attached scsi generic sg3 type 5
[  201.245173] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  201.245185]  sdb: sdb1
[  201.277180] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  201.277191] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[  202.733185] ISO 9660 Extensions: Microsoft Joliet Level 3
[  202.755184] ISOFS: changing to secondary root
[  293.595935] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[  293.596427] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  303.916076] eth0: no IPv6 routers present
[  441.856145] usb 5-2: USB disconnect, address 2
[  441.858045] FAT: bread failed in fat_clusters_flush
[  441.876574] FAT: bread failed in fat_clusters_flush
[  441.876798] FAT: bread failed in fat_clusters_flush
[  441.878340] FAT: bread failed in fat_clusters_flush
[  441.976949] scsi 5:0:0:1: rejecting I/O to dead device
[  443.629661] sky2 eth0: Link is down.
[  552.096094] usb 5-2: new full speed USB device using uhci_hcd and address 3
[  552.216107] usb 5-2: device descriptor read/64, error -71
[  552.440110] usb 5-2: device descriptor read/64, error -71
[  552.656111] usb 5-2: new full speed USB device using uhci_hcd and address 4
[  552.798169] usb 5-2: not running at top speed; connect to a high speed hub
[  552.819346] usb 5-2: configuration #1 chosen from 1 choice
[  552.822520] scsi6 : SCSI emulation for USB Mass Storage devices
[  552.839608] usb-storage: device found at 4
[  552.839615] usb-storage: waiting for device to settle before scanning
[  557.838295] usb-storage: device scan complete
[  557.841384] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[  557.844254] scsi 6:0:0:1: CD-ROM            SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0
[  557.846435] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  557.865175] sd 6:0:0:0: [sdb] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
[  557.873197] sd 6:0:0:0: [sdb] Write Protect is off
[  557.873205] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[  557.873212] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  557.876194] sr1: scsi3-mmc drive: 48x/48x tray
[  557.876426] sr 6:0:0:1: Attached scsi CD-ROM sr1
[  557.876577] sr 6:0:0:1: Attached scsi generic sg3 type 5
[  557.907193] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  557.907205]  sdb: sdb1
[  557.950203] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  557.950214] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  558.798177] ISO 9660 Extensions: Microsoft Joliet Level 3
[  558.802194] ISOFS: changing to secondary root
[  750.368155] usb 5-2: USB disconnect, address 4
[  750.372824] FAT: bread failed in fat_clusters_flush
[  750.521034] scsi 6:0:0:1: rejecting I/O to dead device
[  844.036110] usb 2-2: new high speed USB device using ehci_hcd and address 3
[  844.169137] usb 2-2: configuration #1 chosen from 1 choice
[  844.180493] scsi7 : SCSI emulation for USB Mass Storage devices
[  844.181014] usb-storage: device found at 3
[  844.181021] usb-storage: waiting for device to settle before scanning
[  849.180432] usb-storage: device scan complete
[  849.181004] scsi 7:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[  849.181867] scsi 7:0:0:1: CD-ROM            SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0
[  849.183435] sd 7:0:0:0: Attached scsi generic sg2 type 0
[  849.195555] sd 7:0:0:0: [sdc] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
[  849.197061] sd 7:0:0:0: [sdc] Write Protect is off
[  849.197067] sd 7:0:0:0: [sdc] Mode Sense: 45 00 00 08
[  849.197070] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  849.197444] sr1: scsi3-mmc drive: 48x/48x tray
[  849.197577] sr 7:0:0:1: Attached scsi CD-ROM sr1
[  849.197664] sr 7:0:0:1: Attached scsi generic sg3 type 5
[  849.205703] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  849.205710]  sdc: sdc1
[  849.214192] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  849.214199] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[  849.290455] FAT: bread failed in fat_clusters_flush
[  849.650808] ISO 9660 Extensions: Microsoft Joliet Level 3
[  849.651302] ISOFS: changing to secondary root
[  849.785685] FAT: bread failed in fat_clusters_flush
[  849.785718] FAT: bread failed in fat_clusters_flush
[  957.200159] FAT: bread failed in fat_clusters_flush
[  957.200188] FAT: bread failed in fat_clusters_flush
[  957.200210] FAT: bread failed in fat_clusters_flush
[ 1126.993665] usb 2-2: USB disconnect, address 3
[ 1126.999250] FAT: bread failed in fat_clusters_flush
[ 1127.140217] scsi 7:0:0:1: rejecting I/O to dead device
[ 1411.696098] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 1411.829222] usb 2-3: configuration #1 chosen from 1 choice
[ 1411.829717] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1411.830102] usb-storage: device found at 4
[ 1411.830108] usb-storage: waiting for device to settle before scanning
[ 1416.828370] usb-storage: device scan complete
[ 1416.828971] scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[ 1416.829471] scsi 8:0:0:1: CD-ROM            SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0
[ 1416.830451] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 1416.843919] sd 8:0:0:0: [sdb] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 1416.845545] sd 8:0:0:0: [sdb] Write Protect is off
[ 1416.845550] sd 8:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1416.845553] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1416.846039] sr1: scsi3-mmc drive: 48x/48x tray
[ 1416.846165] sr 8:0:0:1: Attached scsi CD-ROM sr1
[ 1416.846248] sr 8:0:0:1: Attached scsi generic sg3 type 5
[ 1416.850853] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1416.850861]  sdb: sdb1
[ 1416.859917] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1416.859924] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 1416.912214] FAT: bread failed in fat_clusters_flush
[ 1417.250166] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1417.250792] ISOFS: changing to secondary root
[ 1417.452651] FAT: bread failed in fat_clusters_flush
[ 1417.452682] FAT: bread failed in fat_clusters_flush
[ 1558.578246] usb 2-3: USB disconnect, address 4
[ 1558.584246] FAT: bread failed in fat_clusters_flush
[ 1558.598420] FAT: bread failed in fat_clusters_flush
[ 1558.598679] FAT: bread failed in fat_clusters_flush
[ 1558.600538] FAT: bread failed in fat_clusters_flush
[ 1558.722330] scsi 8:0:0:1: rejecting I/O to dead device
[ 2168.160195] FAT: bread failed in fat_clusters_flush
[ 2168.160225] FAT: bread failed in fat_clusters_flush
[ 2168.160248] FAT: bread failed in fat_clusters_flush

**reed9** · 02-05-2010

Does

Code:

sudo ifconfig eth0 up

return an error?

If not what happens if you do (with ethernet plugged in)

Code:

sudo dhclient eth0

**GrandDesign** · 02-06-2010

This is what came up when I did

Code:

sudo dhclient eth0

Code:

dillon-laptop dillon # sudo dhclient eth0
Internet Systems Consortium DHCP Client V3.1.2
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.

Listening on LPF/eth0/00:21:9b:d2:92:41
Sending on   LPF/eth0/00:21:9b:d2:92:41
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
 * Reloading /etc/samba/smb.conf smbd only
   ...done.

When I entered

Code:

sudo ifconfig eth0 up

It returned me back to the default shell.

Thread Tools

Display

Linux mint wont connect to the internet.

Wow!!!

ok

Hi

Posting Permissions