Getting wireless to work on my HP Mini?

[Devon7234]

Hello,

After the 5th crash on my HP Mini Netbook.
P/N FW376UA#ABA
Service Tag 1030NR
I decided to try Linux. I downloaded ubuntu-9.10-netbook-remix-i386 and burned it as an .ISO and installed it on my Netbook with ease. Everything runs great. It is fast and smooth.
I am attempting to enable my internet now. Usually, there is a little blue light that comes on when I switch the wireless switch. However, when I slide it, it is staying orange. I took some pictures, but I can't post them here because it won't let me. But I've illustrated it well I think. I've been searching around the internet for this solution, but can't really come up with anything that isn't spam/garbage.

[reed9]

Hello. We need more info. Please read the wireless setup sticky.

[Devon7234]

Checked your link, ran the commands, copy, transferred and pasted the .txt.

[    1.643086] Monitor-Mwait will be used to enter C-2 state
[    1.643144] Monitor-Mwait will be used to enter C-3 state
[    1.643165] Marking TSC unstable due to TSC halts in idle
[    1.643216] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.643273] processor LNXCPU:00: registered as cooling_device0
[    1.643998] ACPI: SSDT 3f7be270 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    1.644571] ACPI: SSDT 3f7be580 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    1.645423] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.645469] processor LNXCPU:01: registered as cooling_device1
[    1.647226] Switched to high resolution mode on CPU 1
[    1.647233] Switched to high resolution mode on CPU 0
[    1.653320] thermal LNXTHERM:01: registered as thermal_zone0
[    1.653340] ACPI: Thermal Zone [THRM] (38 C)
[    1.653465] isapnp: Scanning for PnP cards...
[    1.683178] ACPI: Battery Slot [BAT1] (battery present)
[    2.007303] isapnp: No Plug & Play device found
[    2.009955] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.012634] brd: module loaded
[    2.013677] loop: module loaded
[    2.013854] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    2.014092] ata_piix 0000:00:1f.1: version 2.13
[    2.014119]   alloc irq_desc for 18 on node -1
[    2.014124]   alloc kstat_irqs on node -1
[    2.014137] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.014201] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.014370] scsi0 : ata_piix
[    2.014575] scsi1 : ata_piix
[    2.017426] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.017434] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.019435] Fixed MDIO Bus: probed
[    2.019518] PPP generic driver version 2.4.2
[    2.019751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.019796]   alloc irq_desc for 23 on node -1
[    2.019801]   alloc kstat_irqs on node -1
[    2.019815] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.019847] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.019854] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.019955] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.023883] ehci_hcd 0000:00:1d.7: debug port 1
[    2.023894] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.023925] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
[    2.027885] ata2: port disabled. ignoring.
[    2.036027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.036202] usb usb1: configuration #1 chosen from 1 choice
[    2.036270] hub 1-0:1.0: USB hub found
[    2.036288] hub 1-0:1.0: 8 ports detected
[    2.036437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.036489] uhci_hcd: USB Universal Host Controller Interface driver
[    2.036562] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.036575] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.036582] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.036666] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.036705] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[    2.036880] usb usb2: configuration #1 chosen from 1 choice
[    2.036947] hub 2-0:1.0: USB hub found
[    2.036963] hub 2-0:1.0: 2 ports detected
[    2.037094]   alloc irq_desc for 19 on node -1
[    2.037100]   alloc kstat_irqs on node -1
[    2.037112] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.037124] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.037131] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.037202] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.037251] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[    2.037425] usb usb3: configuration #1 chosen from 1 choice
[    2.037487] hub 3-0:1.0: USB hub found
[    2.037502] hub 3-0:1.0: 2 ports detected
[    2.037592] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.037603] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.037610] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.037676] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.037722] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    2.037893] usb usb4: configuration #1 chosen from 1 choice
[    2.037953] hub 4-0:1.0: USB hub found
[    2.037967] hub 4-0:1.0: 2 ports detected
[    2.038057] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.038069] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.038076] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.038142] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.038192] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[    2.038364] usb usb5: configuration #1 chosen from 1 choice
[    2.038424] hub 5-0:1.0: USB hub found
[    2.038439] hub 5-0:1.0: 2 ports detected
[    2.038640] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.043652] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.046613] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.046628] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.046638] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.046647] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.046657] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.046821] mice: PS/2 mouse device common for all mice
[    2.047133] rtc_cmos 00:03: RTC can wake from S4
[    2.047206] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.047247] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.047501] device-mapper: uevent: version 1.0.3
[    2.047739] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.047930] device-mapper: multipath: version 1.1.0 loaded
[    2.047937] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.048261] EISA: Probing bus 0 at eisa.0
[    2.048303] EISA: Detected 0 cards.
[    2.048691] cpuidle: using governor ladder
[    2.048946] cpuidle: using governor menu
[    2.050106] TCP cubic registered
[    2.050480] NET: Registered protocol family 10
[    2.051436] lo: Disabled Privacy Extensions
[    2.052180] NET: Registered protocol family 17
[    2.052225] Bluetooth: L2CAP ver 2.13
[    2.052230] Bluetooth: L2CAP socket layer initialized
[    2.052236] Bluetooth: SCO (Voice Link) ver 0.6
[    2.052240] Bluetooth: SCO socket layer initialized
[    2.052346] Bluetooth: RFCOMM TTY layer initialized
[    2.052353] Bluetooth: RFCOMM socket layer initialized
[    2.052357] Bluetooth: RFCOMM ver 1.11
[    2.053198] Using IPI No-Shortcut mode
[    2.053361] PM: Resume from disk failed.
[    2.053395] registered taskstats version 1
[    2.053603]   Magic number: 14:757:317
[    2.053635] tty tty42: hash matches
[    2.053726] rtc_cmos 00:03: setting system clock to 2010-02-25 06:19:10 UTC (1267078750)
[    2.053735] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.053740] EDD information not available.
[    2.084188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    2.180212] Clocksource tsc unstable (delta = -108848121 ns)
[    2.180645] ata1.00: CFA: SanDisk pSSD 16GB, SSD 4.46, max UDMA/66
[    2.180652] ata1.00: 32014080 sectors, multi 0: LBA 
[    2.188668] ata1.00: configured for UDMA/66
[    2.188902] scsi 0:0:0:0: Direct-Access     ATA      SanDisk pSSD 16G SSD  PQ: 0 ANSI: 5
[    2.189217] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.189336] sd 0:0:0:0: [sda] 32014080 512-byte logical blocks: (16.3 GB/15.2 GiB)
[    2.189470] sd 0:0:0:0: [sda] Write Protect is off
[    2.189477] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.189548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.189893]  sda: sda1 sda2 < sda5 >
[    2.192688] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.192734] Freeing unused kernel memory: 540k freed
[    2.193290] Write protecting the kernel text: 4568k
[    2.193370] Write protecting the kernel read-only data: 1836k
[    2.353108] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    2.461549] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/input/input6
[    2.461657] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[    2.518659] Linux agpgart interface v0.103
[    2.536849] usb 1-2: configuration #1 chosen from 1 choice
[    2.567201] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    2.567507] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    2.570600] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    2.692133] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    2.721404] [drm] Initialized drm 1.1.0 20060810
[    2.755586] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.755601] i915 0000:00:02.0: setting latency timer to 64
[    2.769068] b43-pci-bridge 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.769098] b43-pci-bridge 0000:01:00.0: setting latency timer to 64
[    2.785352] Initializing USB Mass Storage driver...
[    2.785603] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.786018] usbcore: registered new interface driver usb-storage
[    2.786027] USB Mass Storage support registered.
[    2.788568] usb-storage: device found at 2
[    2.788576] usb-storage: waiting for device to settle before scanning
[    2.844206] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0
[    2.854191] usb 1-4: configuration #1 chosen from 1 choice
[    2.973050] usb 1-5: new high speed USB device using ehci_hcd and address 4
[    3.007275] [drm] fb0: inteldrmfb frame buffer device
[    3.007294] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.106681] usb 1-5: configuration #1 chosen from 1 choice
[    3.141045] scsi3 : SCSI emulation for USB Mass Storage devices
[    3.149176] usb-storage: device found at 4
[    3.149181] usb-storage: waiting for device to settle before scanning
[    3.354011] [drm] LVDS-8: set mode 1024x600 e
[    3.753046] Console: switching to colour frame buffer device 128x37
[    4.320335] PM: Starting manual resume from disk
[    4.320344] PM: Resume from partition 8:5
[    4.320349] PM: Checking hibernation image.
[    4.320847] PM: Resume from disk failed.
[    4.328617] EXT4-fs (sda1): barriers enabled
[    4.332543] kjournald2 starting: pid 358, dev sda1:8, commit interval 5 seconds
[    4.332602] EXT4-fs (sda1): delayed allocation enabled
[    4.332617] EXT4-fs: file extents enabled
[    4.336426] EXT4-fs: mballoc enabled
[    4.336461] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.575259] type=1505 audit(1267078753.018:2): operation="profile_load" pid=381 name=/sbin/dhclient3
[    4.575861] type=1505 audit(1267078753.018:3): operation="profile_load" pid=381 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.576259] type=1505 audit(1267078753.022:4): operation="profile_load" pid=381 name=/usr/lib/connman/scripts/dhclient-script
[    4.604225] type=1505 audit(1267078753.050:5): operation="profile_load" pid=382 name=/usr/bin/evince
[    4.613145] type=1505 audit(1267078753.058:6): operation="profile_load" pid=382 name=/usr/bin/evince-previewer
[    4.618611] type=1505 audit(1267078753.062:7): operation="profile_load" pid=382 name=/usr/bin/evince-thumbnailer
[    4.631719] type=1505 audit(1267078753.074:8): operation="profile_load" pid=384 name=/usr/lib/cups/backend/cups-pdf
[    4.632510] type=1505 audit(1267078753.078:9): operation="profile_load" pid=384 name=/usr/sbin/cupsd
[    4.919565] Adding 714852k swap on /dev/sda5.  Priority:-1 extents:1 across:714852k 
[    5.001993] EXT4-fs (sda1): internal journal on sda1:8
[    5.063504] udev: starting version 147
[    5.352866] intel_rng: FWH not detected
[    5.614914] lp: driver loaded but no devices found
[    5.811607] Linux video capture interface: v2.00
[    5.848441] cfg80211: Calling CRDA to update world regulatory domain
[    5.879323] uvcvideo: Found UVC 1.00 device Webcam-101 (10f1:1a08)
[    5.896409] input: Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[    5.896599] usbcore: registered new interface driver uvcvideo
[    5.896665] USB Video Class driver (v0.1.0)
[    6.134039] cfg80211: World regulatory domain updated:
[    6.134054] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.134071] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.134084] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.134097] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.134110] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.134122] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.189466] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[    6.244567] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
[    6.244674] b43: probe of ssb0:0 failed with error -95
[    6.244753] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[    6.361989] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.401457] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000
[    6.435264] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    6.773460] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.773514] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.869648] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    6.877795] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.877955] input: HDA Intel Mic at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.878115] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.878317] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.956132] __ratelimit: 3 callbacks suppressed
[    6.956140] type=1505 audit(1267096755.402:11): operation="profile_replace" pid=783 name=/sbin/dhclient3
[    6.956922] type=1505 audit(1267096755.402:12): operation="profile_replace" pid=783 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    6.957374] type=1505 audit(1267096755.402:13): operation="profile_replace" pid=783 name=/usr/lib/connman/scripts/dhclient-script
[    6.965937] type=1505 audit(1267096755.410:14): operation="profile_replace" pid=784 name=/usr/bin/evince
[    6.976365] type=1505 audit(1267096755.422:15): operation="profile_replace" pid=784 name=/usr/bin/evince-previewer
[    6.982630] type=1505 audit(1267096755.426:16): operation="profile_replace" pid=784 name=/usr/bin/evince-thumbnailer
[    6.997117] type=1505 audit(1267096755.442:17): operation="profile_replace" pid=849 name=/usr/lib/cups/backend/cups-pdf
[    6.998192] type=1505 audit(1267096755.442:18): operation="profile_replace" pid=849 name=/usr/sbin/cupsd
[    7.002859] type=1505 audit(1267096755.446:19): operation="profile_replace" pid=850 name=/usr/sbin/tcpdump
[    7.788428] usb-storage: device scan complete
[    7.825392] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GP08LU10  KE01 PQ: 0 ANSI: 0
[    7.832582] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.832598] Uniform CD-ROM driver Revision: 3.20
[    7.833023] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    7.833176] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    8.161128] usb-storage: device scan complete
[    8.169445] scsi 3:0:0:0: Direct-Access     Single   Flash Reader     1.00 PQ: 0 ANSI: 0
[    8.170947] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    8.798202] sd 3:0:0:0: [sdb] 3962880 512-byte logical blocks: (2.02 GB/1.88 GiB)
[    8.799044] sd 3:0:0:0: [sdb] Write Protect is off
[    8.799059] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    8.799071] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    8.802939] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    8.803194]  sdb: sdb1 sdb2 < sdb5 >
[    8.810191] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    8.810446] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[   10.436598] ppdev: user-space parallel port driver
[   14.335155] CPU0 attaching NULL sched-domain.
[   14.335167] CPU1 attaching NULL sched-domain.
[   14.350143] CPU0 attaching sched-domain:
[   14.350156]  domain 0: span 0-1 level SIBLING
[   14.350164]   groups: 0 1
[   14.350177]   domain 1: span 0-1 level MC
[   14.350185]    groups: 0-1 (__cpu_power = 2048)
[   14.350203] CPU1 attaching sched-domain:
[   14.350219]  domain 0: span 0-1 level SIBLING
[   14.350226]   groups: 1 0
[   14.350239]   domain 1: span 0-1 level MC
[   14.350247]    groups: 0-1 (__cpu_power = 2048)
[   18.362260] CPU0 attaching NULL sched-domain.
[   18.362272] CPU1 attaching NULL sched-domain.
[   18.380240] CPU0 attaching sched-domain:
[   18.380256]  domain 0: span 0-1 level SIBLING
[   18.380269]   groups: 0 1
[   18.380288]   domain 1: span 0-1 level MC
[   18.380299]    groups: 0-1 (__cpu_power = 2048)
[   18.380321] CPU1 attaching sched-domain:
[   18.380331]  domain 0: span 0-1 level SIBLING
[   18.380342]   groups: 1 0
[   18.380359]   domain 1: span 0-1 level MC
[   18.380369]    groups: 0-1 (__cpu_power = 2048)
[   27.209504] EXT4-fs (sdb1): barriers enabled
[   27.221198] kjournald2 starting: pid 1542, dev sdb1:8, commit interval 5 seconds
[   27.229534] EXT4-fs (sdb1): internal journal on sdb1:8
[   27.229563] EXT4-fs (sdb1): delayed allocation enabled
[   27.229572] EXT4-fs: file extents enabled
[   27.229692] EXT4-fs: mballoc enabled
[   27.229743] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[   28.548139] UDF-fs: No VRS found
[   28.548149] UDF-fs: No partition found (1)
[   28.655556] ISO 9660 Extensions: Microsoft Joliet Level 3
[   28.720205] ISO 9660 Extensions: RRIP_1991A
[  253.710631] usb 1-2: USB disconnect, address 2
[  672.836284] usb 1-2: new high speed USB device using ehci_hcd and address 5
[  672.989719] usb 1-2: configuration #1 chosen from 1 choice
[  672.997119] scsi4 : SCSI emulation for USB Mass Storage devices
[  672.997803] usb-storage: device found at 5
[  672.997817] usb-storage: waiting for device to settle before scanning
[  677.996571] usb-storage: device scan complete
[  678.032998] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GP08LU10  KE01 PQ: 0 ANSI: 0
[  678.600925] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[  678.601399] sr 4:0:0:0: Attached scsi CD-ROM sr1
[  678.601719] sr 4:0:0:0: Attached scsi generic sg1 type 5
[  689.154161] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.154183] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.154204] Info fld=0x7ffc0
[  689.154212] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.154233] end_request: I/O error, dev sr1, sector 2096896
[  689.154253] Buffer I/O error on device sr1, logical block 2096896
[  689.154270] Buffer I/O error on device sr1, logical block 2096897
[  689.154283] Buffer I/O error on device sr1, logical block 2096898
[  689.154296] Buffer I/O error on device sr1, logical block 2096899
[  689.154309] Buffer I/O error on device sr1, logical block 2096900
[  689.154322] Buffer I/O error on device sr1, logical block 2096901
[  689.154335] Buffer I/O error on device sr1, logical block 2096902
[  689.154348] Buffer I/O error on device sr1, logical block 2096903
[  689.172665] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.172687] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.172707] Info fld=0x7ffc0
[  689.172715] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.172737] end_request: I/O error, dev sr1, sector 2096896
[  689.172755] Buffer I/O error on device sr1, logical block 2096896
[  689.172771] Buffer I/O error on device sr1, logical block 2096897
[  689.196716] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.196744] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.196772] Info fld=0x7fffa
[  689.196784] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.196813] end_request: I/O error, dev sr1, sector 2097128
[  689.227402] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.227419] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.227435] Info fld=0x7fffa
[  689.227441] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.227457] end_request: I/O error, dev sr1, sector 2097128
[  689.232277] sr 4:0:0:0: [sr1] unaligned transfer
[  689.234695] sr 4:0:0:0: [sr1] unaligned transfer
[  689.234832] sr 4:0:0:0: [sr1] unaligned transfer
[  689.234898] sr 4:0:0:0: [sr1] unaligned transfer
[  689.234962] sr 4:0:0:0: [sr1] unaligned transfer
[  689.235029] sr 4:0:0:0: [sr1] unaligned transfer
[  689.235093] sr 4:0:0:0: [sr1] unaligned transfer
[  689.293668] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.293691] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.293711] Info fld=0x7fff0
[  689.293720] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.293741] end_request: I/O error, dev sr1, sector 2097088
[  689.307281] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.307307] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.307333] Info fld=0x7fffc
[  689.307344] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.307372] end_request: I/O error, dev sr1, sector 2097136
[  689.312088] sr 4:0:0:0: [sr1] unaligned transfer
[  689.312294] sr 4:0:0:0: [sr1] unaligned transfer
[  689.368897] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.368918] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.368939] Info fld=0x7ffc0
[  689.368948] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.368969] end_request: I/O error, dev sr1, sector 2096896
[  689.378037] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.378069] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.378089] Info fld=0x7fffa
[  689.378098] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.378119] end_request: I/O error, dev sr1, sector 2097128
[  689.378328] sr 4:0:0:0: [sr1] unaligned transfer
[  689.378464] sr 4:0:0:0: [sr1] unaligned transfer
[  689.378560] sr 4:0:0:0: [sr1] unaligned transfer
[  689.378651] sr 4:0:0:0: [sr1] unaligned transfer
[  689.378744] sr 4:0:0:0: [sr1] unaligned transfer
[  689.378833] sr 4:0:0:0: [sr1] unaligned transfer
[  689.390897] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.390919] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.390939] Info fld=0x7fff0
[  689.390947] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.390968] end_request: I/O error, dev sr1, sector 2097088
[  689.399022] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  689.399043] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current] 
[  689.399063] Info fld=0x7fffc
[  689.399072] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[  689.399093] end_request: I/O error, dev sr1, sector 2097136
[  689.399284] sr 4:0:0:0: [sr1] unaligned transfer
[  689.399425] sr 4:0:0:0: [sr1] unaligned transfer
[  689.451953] ISO 9660 Extensions: Microsoft Joliet Level 3
[  689.542069] ISO 9660 Extensions: RRIP_1991A
[ 1232.355754] usb 1-2: USB disconnect, address 5
[ 1232.378223] scsi 4:0:0:0: rejecting I/O to dead device
[ 4006.540172] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 4006.674089] usb 1-1: configuration #1 chosen from 1 choice
[ 4006.677603] scsi5 : SCSI emulation for USB Mass Storage devices
[ 4006.678641] usb-storage: device found at 6
[ 4006.678656] usb-storage: waiting for device to settle before scanning
[ 4011.676567] usb-storage: device scan complete
[ 4011.677448] scsi 5:0:0:0: Direct-Access     WD       3200AAV External 1.65 PQ: 0 ANSI: 4
[ 4011.680312] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 4011.694228] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4011.695162] sd 5:0:0:0: [sdc] Write Protect is off
[ 4011.695174] sd 5:0:0:0: [sdc] Mode Sense: 21 00 00 00
[ 4011.695181] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 4011.698826] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 4011.698845]  sdc: sdc1
[ 4011.705814] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 4011.705831] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 4049.942740] usb 1-1: USB disconnect, address 6
[ 4107.384264] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 4107.518171] usb 1-1: configuration #1 chosen from 1 choice
[ 4107.521160] scsi6 : SCSI emulation for USB Mass Storage devices
[ 4107.525738] usb-storage: device found at 7
[ 4107.525753] usb-storage: waiting for device to settle before scanning
[ 4112.524630] usb-storage: device scan complete
[ 4112.525456] scsi 6:0:0:0: Direct-Access     WD       3200AAV External 1.65 PQ: 0 ANSI: 4
[ 4112.527928] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4112.543000] sd 6:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4112.548163] sd 6:0:0:0: [sdd] Write Protect is off
[ 4112.548176] sd 6:0:0:0: [sdd] Mode Sense: 21 00 00 00
[ 4112.548184] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 4112.551277] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 4112.551295]  sdd: sdd1
[ 4112.560813] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 4112.560832] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 4225.009637] usb 1-1: USB disconnect, address 7
[ 4259.181124] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 4259.314187] usb 1-1: configuration #1 chosen from 1 choice
[ 4259.316926] scsi7 : SCSI emulation for USB Mass Storage devices
[ 4259.317620] usb-storage: device found at 8
[ 4259.317634] usb-storage: waiting for device to settle before scanning
[ 4264.316574] usb-storage: device scan complete
[ 4264.317466] scsi 7:0:0:0: Direct-Access     WD       3200AAV External 1.65 PQ: 0 ANSI: 4
[ 4264.319821] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 4264.342464] sd 7:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4264.344620] sd 7:0:0:0: [sdd] Write Protect is off
[ 4264.344639] sd 7:0:0:0: [sdd] Mode Sense: 21 00 00 00
[ 4264.344650] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 4264.347843] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 4264.347862]  sdd: sdd1
[ 4264.369318] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 4264.369345] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 4376.196521] usb 1-1: USB disconnect, address 8
[ 4492.348173] usb 1-1: new high speed USB device using ehci_hcd and address 9
[ 4492.482293] usb 1-1: configuration #1 chosen from 1 choice
[ 4492.489171] scsi8 : SCSI emulation for USB Mass Storage devices
[ 4492.495260] usb-storage: device found at 9
[ 4492.495276] usb-storage: waiting for device to settle before scanning
[ 4497.492478] usb-storage: device scan complete
[ 4497.493254] scsi 8:0:0:0: Direct-Access     WD       3200AAV External 1.65 PQ: 0 ANSI: 4
[ 4497.495664] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 4497.518798] sd 8:0:0:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4497.520124] sd 8:0:0:0: [sde] Write Protect is off
[ 4497.520137] sd 8:0:0:0: [sde] Mode Sense: 21 00 00 00
[ 4497.520145] sd 8:0:0:0: [sde] Assuming drive cache: write through
[ 4497.522127] sd 8:0:0:0: [sde] Assuming drive cache: write through
[ 4497.522148]  sde: sde1
[ 4497.537536] sd 8:0:0:0: [sde] Assuming drive cache: write through
[ 4497.537563] sd 8:0:0:0: [sde] Attached SCSI disk
[ 4521.681788] usb 1-1: USB disconnect, address 9
[ 4523.044269] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 4523.178328] usb 1-1: configuration #1 chosen from 1 choice
[ 4523.179193] scsi9 : SCSI emulation for USB Mass Storage devices
[ 4523.179743] usb-storage: device found at 10
[ 4523.179756] usb-storage: waiting for device to settle before scanning
[ 4528.176643] usb-storage: device scan complete
[ 4528.177450] scsi 9:0:0:0: Direct-Access     WD       3200AAV External 1.65 PQ: 0 ANSI: 4
[ 4528.179820] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 4528.183394] sd 9:0:0:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4528.184396] sd 9:0:0:0: [sde] Write Protect is off
[ 4528.184413] sd 9:0:0:0: [sde] Mode Sense: 21 00 00 00
[ 4528.184424] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 4528.189505] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 4528.189524]  sde: sde1
[ 4528.194780] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 4528.194801] sd 9:0:0:0: [sde] Attached SCSI disk
[ 4599.899683] usb 1-5: USB disconnect, address 4
[ 4600.357954] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[ 4600.357966] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[ 4600.357975] EXT4-fs: mballoc: 0 generated and it took 0
[ 4600.357981] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[ 4635.234563] usb 1-1: USB disconnect, address 10
[ 4681.628372] INFO: task sync:2185 blocked for more than 120 seconds.
[ 4681.628387] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4681.628401] sync          D c08145c0     0  2185   2182 0x00000000
[ 4681.628422]  deb4df2c 00000086 ef7dee7c c08145c0 f657a848 c08145c0 3200d18c 00000417
[ 4681.628452]  c08145c0 c08145c0 f657a848 c08145c0 31fc1f4a 00000417 c08145c0 ef52d500
[ 4681.628480]  f657a5b0 deb4df60 f657a5b0 f215ae3c deb4df58 c0570515 fffeffff 7fffffff
[ 4681.628508] Call Trace:
[ 4681.628536]  [<c0570515>] rwsem_down_failed_common+0x75/0x1a0
[ 4681.628553]  [<c057068d>] rwsem_down_read_failed+0x1d/0x30
[ 4681.628570]  [<c05706e7>] call_rwsem_down_read_failed+0x7/0x10
[ 4681.628585]  [<c056fca7>] ? down_read+0x17/0x20
[ 4681.628602]  [<c0207385>] sync_filesystems+0xb5/0x100
[ 4681.628617]  [<c0207411>] sys_sync+0x11/0x40
[ 4681.628633]  [<c010336c>] syscall_call+0x7/0xb
[ 4801.628311] INFO: task sync:2185 blocked for more than 120 seconds.
[ 4801.628327] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4801.628341] sync          D c08145c0     0  2185   2182 0x00000000
[ 4801.628362]  deb4df2c 00000086 ef7dee7c c08145c0 f657a848 c08145c0 3200d18c 00000417
[ 4801.628392]  c08145c0 c08145c0 f657a848 c08145c0 31fc1f4a 00000417 c08145c0 ef52d500
[ 4801.628420]  f657a5b0 deb4df60 f657a5b0 f215ae3c deb4df58 c0570515 fffeffff 7fffffff
[ 4801.628448] Call Trace:
[ 4801.628476]  [<c0570515>] rwsem_down_failed_common+0x75/0x1a0
[ 4801.628494]  [<c057068d>] rwsem_down_read_failed+0x1d/0x30
[ 4801.628510]  [<c05706e7>] call_rwsem_down_read_failed+0x7/0x10
[ 4801.628526]  [<c056fca7>] ? down_read+0x17/0x20
[ 4801.628543]  [<c0207385>] sync_filesystems+0xb5/0x100
[ 4801.628558]  [<c0207411>] sys_sync+0x11/0x40
[ 4801.628573]  [<c010336c>] syscall_call+0x7/0xb
[ 4921.628351] INFO: task sync:2185 blocked for more than 120 seconds.
[ 4921.628366] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4921.628380] sync          D c08145c0     0  2185   2182 0x00000000
[ 4921.628401]  deb4df2c 00000086 ef7dee7c c08145c0 f657a848 c08145c0 3200d18c 00000417
[ 4921.628431]  c08145c0 c08145c0 f657a848 c08145c0 31fc1f4a 00000417 c08145c0 ef52d500
[ 4921.628460]  f657a5b0 deb4df60 f657a5b0 f215ae3c deb4df58 c0570515 fffeffff 7fffffff
[ 4921.628488] Call Trace:
[ 4921.628516]  [<c0570515>] rwsem_down_failed_common+0x75/0x1a0
[ 4921.628534]  [<c057068d>] rwsem_down_read_failed+0x1d/0x30
[ 4921.628550]  [<c05706e7>] call_rwsem_down_read_failed+0x7/0x10
[ 4921.628566]  [<c056fca7>] ? down_read+0x17/0x20
[ 4921.628583]  [<c0207385>] sync_filesystems+0xb5/0x100
[ 4921.628597]  [<c0207411>] sys_sync+0x11/0x40
[ 4921.628613]  [<c010336c>] syscall_call+0x7/0xb
devon@TheNetbook:~$ uname -r
2.6.31-14-generic
devon@TheNetbook:~$ lspci -knn > lspci.txt
devon@TheNetbook:~$ uname -r

[reed9]

01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)

Kernel driver in use: b43-pci-bridge

Kernel modules: ssb

Well, your post was in my email notification, but you seem to have removed it here?

Anyway, you need the broadcom wl driver. I don't know the UNR remix at all, but normally Ubuntu has a hardware manager application that will install it for you. Otherwise, do

sudo apt-get install bcmwl-kernel-source

You will need a wired connection for this. If you do not have that, post, and we can go through installing it the hard way.

EDIT: Ah, there is your post.

[Devon7234]

Cool Cool. Yeah I don't have a wired connection, I tried plugging in my Ethernet cable, but couldn't get online. Thanks for the help. What is the difficult way?

[reed9]

You'll need to download the necessary packages to a flash drive or other external drive, transfer them to your Ubuntu machine, and install them.

Links the the necessary packages are the 4th post down in this thread.

[snokerpoker]

Do you have the driver disk that came with your laptop? You can try-
sudo apt-get install ndisgtk. Then go to the Windows Wireless Drivers application and browse to .inf file. Once that is complete you just need to go to network manager and add a wireless connection. For home you will most likely need to set it to "connect automatically".

[reed9]

ndiswrapper is unnecessary for this card. Also, without internet access already, downloading and installing anything with apt-get is not possible.

Regarding your ethernet issue, can you repost the output of

lspci -vnn
lsmod

It was not included in your previous post.

[Devon7234]

"lspci -vnn & lsmod in the terminal screen yielded below. Also, I downloaded: bcmwl-kernel-source_5.10.91.9+bdcom-0ubuntu4_i386.deb dkms_2.1.0.1-0ubuntu1_all.deb
fakeroot_1.12.4ubuntu1_i386.deb
patch_2.5.9-5_i386.deb

I put them on an external, and transferred them to my netbook. I installed them in the order you recommended, dkms, fakeroot, and patch before bcmwl-kernel-source. Does everything sound good so far? Thanks for your help too!

devon@TheNetbook:~$ lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at fe980000 (32-bit, non-prefetchable) [size=512K]
	I/O ports at dc80 [size=8]
	Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Memory at fe940000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, fast devsel, latency 0
	Memory at fe880000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at fe938000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fea00000-feafffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: feb00000-febfffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0, IRQ 23
	I/O ports at dc00 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at d880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at d800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at d480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at fe937c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01)
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=1]
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=1]
	I/O ports at ffa0 [size=16]
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: medium devsel, IRQ 15
	I/O ports at 0400 [size=32]
	Kernel modules: i2c-i801

01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:1507]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at feafc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354]
	Subsystem: Hewlett-Packard Company Device [103c:361a]
	Flags: bus master, fast devsel, latency 0, IRQ 26
	Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
	I/O ports at ec00 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sky2
	Kernel modules: sky2

devon@TheNetbook:~$ lsmod
Module                  Size  Used by
binfmt_misc             8356  1 
ppdev                   6688  0 
joydev                 10272  0 
snd_hda_codec_idt      59844  1 
snd_hda_intel          26920  2 
snd_hda_codec          75708  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep               7200  1 snd_hda_codec
snd_pcm_oss            37920  0 
snd_mixer_oss          16028  1 snd_pcm_oss
b43                   122136  0 
snd_pcm                75296  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           2656  0 
snd_seq_oss            28576  0 
snd_seq_midi            6432  0 
snd_rawmidi            22208  1 snd_seq_midi
snd_seq_midi_event      6940  2 snd_seq_oss,snd_seq_midi
snd_seq                50224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
mac80211              181236  1 b43
iptable_filter          3100  0 
snd_timer              22276  2 snd_pcm,snd_seq
snd_seq_device          6920  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    59204  16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ip_tables              11692  1 iptable_filter
x_tables               16544  1 ip_tables
soundcore               7264  1 snd
cfg80211               93052  2 b43,mac80211
uvcvideo               59080  0 
videodev               36736  1 uvcvideo
lp                      8964  0 
v4l1_compat            14496  2 uvcvideo,videodev
psmouse                56180  0 
serio_raw               5280  0 
led_class               4096  1 b43
snd_page_alloc          9156  2 snd_hda_intel,snd_pcm
parport                35340  2 ppdev,lp
fbcon                  36640  72 
tileblit                2460  1 fbcon
font                    8124  1 fbcon
bitblit                 5372  1 fbcon
softcursor              1756  1 bitblit
usb_storage            52544  1 
ssb                    35300  1 b43
sky2                   46560  0 
i915                  221064  3 
drm                   159584  3 i915
i2c_algo_bit            5760  1 i915
intel_agp              27484  2 i915
agpgart                34988  2 drm,intel_agp
video                  19380  1 i915
output                  2780  1 video
devon@TheNetbook:~$

[reed9]

Ok, for ethernet, your card is recognized and has a driver loading. What happened when you tried to connect using the network manager?

Plug in the ethernet cable and do

sudo dhclient eth0

For the wireless, now that you have everything installed, just restart and see if it is working. Currently the b43 driver is loading which will conflict. You may need to blacklist it.

echo "blacklist b43" | sudo tee -a /etc/modprobe.d/blacklist.conf

Go ahead and do that before restarting. (This just adds a line to the file /etc/modprobe.d/blacklist.conf with the line blacklist b43. You can do so with any text editor as well.)