Ubuntu 9.10 - Rhythmbox stops playing, track progress speeds up

[SkittleLinux18]

This is an interesting one. I just installed Ubuntu 9.10 yesterday. When I opened rhythmbox music player, I dragged over some mp3 files to play. It asked me if I wanted to install mp3 support. Naturally I selected yes, as I have several times before. Everything appeared to install correctly and music started playing. The first track finished fine. The second track made it roughly 20 seconds and then the sound stopped. I switched back to the desktop that rhythmbox was on (I had been browsing firefox on the other desktop) and noticed that the progress bar for the song was moving very fast and would continue doing so on every song. The progress bar would cycle through the length of a 3:40 song in about 6-8 seconds. But there was no sound.

I should also note that the reason I used rhythmbox (RB) was because I tried to install Amarok 2.2, which did install, but I couldn't get the program to work when I opened it. So I decided to settle for rhythmbox. So the first time I encountered this error on RB was the first time I used the program, and the first time I used RB was after I had installed Amarok 2.2 and couldn't get it to work. Idk if this is relevant or not, but I figured I would include it anyway.

Anyway, I have tried a number of potential solutions:

1) Changing the hardware profile for my multimedia.
2) Making sure my bios is set up properly. I have a soundcard, so I disabled onboard audio.
3) I thought maybe Pulseaudio was the problem, but didn't try to resolve it because this thread from he Ubuntu forums appears to be outdated for Karmic Koala, so I didn't take my chances using it.
4) Uninstalling Amarok, however, I couldn't locate all the dependencies to uninstall them
5) Installing "libxine1-ffmpeg" manually since another forum on ubuntuforums had recommended that. However the deb-installer failed with this output

Error: Dependency is not satisfiable: libavcodec1d (>= 0.cvs20070307)

6) Booting to the LiveCD for Kubuntu (Kx) 8.04-2, Kubuntu 9.10, and Ubuntu (Ux) 9.10. I went through the process of opening RB, loading music, installing mp3 support. For Kx 8.04-2, I got an error telling me I needed to install "libxine1-ffmpeg" manually, which I did via deb-installer. Everything worked great. For Kx 9.10 and Ux 9.10, I got the already mentioned error about the unsatisfiable dependency. So I could go back to Kx 8.04-02 (which many of my friends here at LFO know this has been my favorite distro+version for almost two years now). However, I can't be stuck with it just because of some minor issues.

I should also note that video on firefox (e.g.; youtube.com) is very slow and usually greys out firefox until it stops working. Yes, I have installed flash player and jre 6.0 via synaptec. :D So this is apparently an overall multimedia problem, which doesn't surprise me because it seems that both Ubuntu AND Kubuntu have been having more multimedia problems since fall of 2009 (at least based on what I have gathered from forums while searching out my current problem). Whether that is related to the 9.10 releases and later, or not, I don't know.

Another option I have is to try Mint, which I have had very good experiences with in the past. But I don't want to leave the *buntu family as I am very partial to it and really enjoy the time-saving convenience of the deb-installer.

Other info:

Hardware:

ATI Radeon 4670, 2 GB RAM Crucial Balistix, 80 GB hardrive, 3.2 Quadcore, SIIG DP Soundwave 4 Channel PCI soundcard

Screenshots of Hardware Profile:




dmesg output:

[ 0.124001] Booting paravirtualized kernel on bare hardware
[ 0.124001] regulator: core version 0.5
[ 0.124001] Time: 16:35:06 Date: 02/27/10
[ 0.124001] NET: Registered protocol family 16
[ 0.124001] EISA bus registered
[ 0.124001] ACPI: bus type pci registered
[ 0.124001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.124001] PCI: MCFG area at e0000000 reserved in E820
[ 0.124001] PCI: Using MMCONFIG for extended config space
[ 0.124001] PCI: Using configuration type 1 for base access
[ 0.124001] bio: create slab <bio-0> at 0
[ 0.124001] ACPI: EC: Look up EC in DSDT
[ 0.146814] ACPI: BIOS _OSI(Linux) query ignored
[ 0.157020] ACPI: Interpreter enabled
[ 0.157030] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.157058] ACPI: Using IOAPIC for interrupt routing
[ 0.200466] ACPI: No dock devices found.
[ 0.204081] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.204196] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.204201] pci 0000:00:01.0: PME# disabled
[ 0.204285] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.204289] pci 0000:00:1c.0: PME# disabled
[ 0.204352] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.204357] pci 0000:00:1c.1: PME# disabled
[ 0.204409] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.204460] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.204511] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.204561] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
[ 0.204617] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.204669] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.204674] pci 0000:00:1d.7: PME# disabled
[ 0.204785] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.204790] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.204794] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
[ 0.204798] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0cb0-0cbf
[ 0.204830] pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
[ 0.204837] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
[ 0.204843] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
[ 0.204849] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
[ 0.204856] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.204881] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.204885] pci 0000:00:1f.2: PME# disabled
[ 0.204932] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
[ 0.204993] pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.205003] pci 0000:01:00.0: reg 18 64bit mmio: [0xdfef0000-0xdfefffff]
[ 0.205010] pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
[ 0.205019] pci 0000:01:00.0: reg 30 32bit mmio: [0xdff00000-0xdff1ffff]
[ 0.205040] pci 0000:01:00.0: supports D1 D2
[ 0.205077] pci 0000:01:00.1: reg 10 64bit mmio: [0xdfeec000-0xdfeeffff]
[ 0.205115] pci 0000:01:00.1: supports D1 D2
[ 0.205162] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.205166] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfffffff]
[ 0.205170] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.205212] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.205258] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.205300] pci 0000:04:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.205351] pci 0000:04:00.0: supports D1 D2
[ 0.205390] pci 0000:04:02.0: reg 10 io port: [0xcc00-0xccff]
[ 0.205398] pci 0000:04:02.0: reg 14 32bit mmio: [0xdfafff00-0xdfafffff]
[ 0.205426] pci 0000:04:02.0: reg 30 32bit mmio: [0xdfb00000-0xdfb0ffff]
[ 0.205446] pci 0000:04:02.0: supports D1 D2
[ 0.205449] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205454] pci 0000:04:02.0: PME# disabled
[ 0.205498] pci 0000:00:1e.0: transparent bridge
[ 0.205502] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.205506] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfa00000-0xdfbfffff]
[ 0.205528] pci_bus 0000:00: on NUMA node 0
[ 0.205534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.205827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.206170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.206350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 0.206531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.534343] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.534675] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.535004] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 0.535334] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.535664] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.536222] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.536552] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.536883] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.537145] SCSI subsystem initialized
[ 0.537202] libata version 3.00 loaded.
[ 0.537285] usbcore: registered new interface driver usbfs
[ 0.537306] usbcore: registered new interface driver hub
[ 0.537335] usbcore: registered new device driver usb
[ 0.537484] ACPI: WMI: Mapper loaded
[ 0.537486] PCI: Using ACPI for IRQ routing
[ 0.537634] Bluetooth: Core ver 2.15
[ 0.537666] NET: Registered protocol family 31
[ 0.537669] Bluetooth: HCI device and connection manager initialized
[ 0.537671] Bluetooth: HCI socket layer initialized
[ 0.537674] NetLabel: Initializing
[ 0.537675] NetLabel: domain hash size = 128
[ 0.537677] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.537691] NetLabel: unlabeled traffic allowed by default
[ 0.537726] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.537733] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.541583] pnp: PnP ACPI init
[ 0.541604] ACPI: bus type pnp registered
[ 0.544030] Switched to high resolution mode on CPU 0
[ 0.547318] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.547323] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.568850] pnp: PnP ACPI: found 9 devices
[ 0.568853] ACPI: ACPI bus type pnp unregistered
[ 0.568858] PnPBIOS: Disabled by ACPI PNP
[ 0.568871] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 0.568881] system 00:06: iomem range 0x0-0x9ffff could not be reserved
[ 0.568884] system 00:06: iomem range 0x100000-0xffffff could not be reserved
[ 0.568888] system 00:06: iomem range 0x1000000-0x7fe86bff could not be reserved
[ 0.568891] system 00:06: iomem range 0xc0000-0xfffff could not be reserved
[ 0.568894] system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.568898] system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.568901] system 00:06: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.568904] system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.568907] system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.568916] system 00:07: ioport range 0x100-0x1fe could not be reserved
[ 0.568920] system 00:07: ioport range 0x200-0x277 has been reserved
[ 0.568923] system 00:07: ioport range 0x280-0x2e7 has been reserved
[ 0.568926] system 00:07: ioport range 0x2f0-0x2f7 has been reserved
[ 0.568929] system 00:07: ioport range 0x300-0x377 could not be reserved
[ 0.568932] system 00:07: ioport range 0x380-0x3bb has been reserved
[ 0.568935] system 00:07: ioport range 0x3c0-0x3e7 could not be reserved
[ 0.568938] system 00:07: ioport range 0x3f6-0x3f7 could not be reserved
[ 0.568941] system 00:07: ioport range 0x400-0x4cf has been reserved
[ 0.568944] system 00:07: ioport range 0x4d2-0x57f has been reserved
[ 0.568947] system 00:07: ioport range 0x580-0x677 has been reserved
[ 0.568950] system 00:07: ioport range 0x680-0x777 has been reserved
[ 0.568952] system 00:07: ioport range 0x780-0x7bb has been reserved
[ 0.568955] system 00:07: ioport range 0x7c0-0x7ff has been reserved
[ 0.568958] system 00:07: ioport range 0x8e0-0x8ff has been reserved
[ 0.568961] system 00:07: ioport range 0x900-0x9fe has been reserved
[ 0.568964] system 00:07: ioport range 0xa00-0xafe has been reserved
[ 0.568967] system 00:07: ioport range 0xb00-0xbfe has been reserved
[ 0.568970] system 00:07: ioport range 0xc80-0xcaf has been reserved
[ 0.568973] system 00:07: ioport range 0xcc0-0xcf7 has been reserved
[ 0.568976] system 00:07: ioport range 0xd00-0xdfe has been reserved
[ 0.568979] system 00:07: ioport range 0xe00-0xefe has been reserved
[ 0.568982] system 00:07: ioport range 0xf00-0xffe has been reserved
[ 0.568985] system 00:07: ioport range 0x2000-0x20fe has been reserved
[ 0.568988] system 00:07: ioport range 0x2100-0x21fe has been reserved
[ 0.568991] system 00:07: ioport range 0x2200-0x22fe has been reserved
[ 0.568994] system 00:07: ioport range 0x2300-0x23fe has been reserved
[ 0.568997] system 00:07: ioport range 0x2400-0x24fe has been reserved
[ 0.569000] system 00:07: ioport range 0x2500-0x25fe has been reserved
[ 0.569003] system 00:07: ioport range 0x2600-0x26fe has been reserved
[ 0.569006] system 00:07: ioport range 0x2700-0x27fe has been reserved
[ 0.569009] system 00:07: ioport range 0x2800-0x28fe has been reserved
[ 0.569012] system 00:07: ioport range 0x2900-0x29fe has been reserved
[ 0.569015] system 00:07: ioport range 0x2a00-0x2afe has been reserved
[ 0.569019] system 00:07: ioport range 0x2b00-0x2bfe has been reserved
[ 0.569022] system 00:07: ioport range 0x2c00-0x2cfe has been reserved
[ 0.569025] system 00:07: ioport range 0x2d00-0x2dfe has been reserved
[ 0.569028] system 00:07: ioport range 0x2e00-0x2efe has been reserved
[ 0.569031] system 00:07: ioport range 0x2f00-0x2ffe has been reserved
[ 0.569034] system 00:07: ioport range 0x5000-0x50fe has been reserved
[ 0.569037] system 00:07: ioport range 0x5100-0x51fe has been reserved
[ 0.569040] system 00:07: ioport range 0x5200-0x52fe has been reserved
[ 0.569043] system 00:07: ioport range 0x5300-0x53fe has been reserved
[ 0.569047] system 00:07: ioport range 0x5400-0x54fe has been reserved
[ 0.569050] system 00:07: ioport range 0x5500-0x55fe has been reserved
[ 0.569053] system 00:07: ioport range 0x5600-0x56fe has been reserved
[ 0.569056] system 00:07: ioport range 0x5700-0x57fe has been reserved
[ 0.569059] system 00:07: ioport range 0x5800-0x58fe has been reserved
[ 0.569062] system 00:07: ioport range 0x5900-0x59fe has been reserved
[ 0.569065] system 00:07: ioport range 0x5a00-0x5afe has been reserved
[ 0.569069] system 00:07: ioport range 0x5b00-0x5bfe has been reserved
[ 0.569072] system 00:07: ioport range 0x5c00-0x5cfe has been reserved
[ 0.569075] system 00:07: ioport range 0x5d00-0x5dfe has been reserved
[ 0.569078] system 00:07: ioport range 0x5e00-0x5efe has been reserved
[ 0.569081] system 00:07: ioport range 0x5f00-0x5ffe has been reserved
[ 0.569085] system 00:07: ioport range 0x6000-0x60fe has been reserved
[ 0.569088] system 00:07: ioport range 0x6100-0x61fe has been reserved
[ 0.569091] system 00:07: ioport range 0x6200-0x62fe has been reserved
[ 0.569094] system 00:07: ioport range 0x6300-0x63fe has been reserved
[ 0.569097] system 00:07: ioport range 0x6400-0x64fe has been reserved
[ 0.569101] system 00:07: ioport range 0x6500-0x65fe has been reserved
[ 0.569104] system 00:07: ioport range 0x6600-0x66fe has been reserved
[ 0.569107] system 00:07: ioport range 0x6700-0x67fe has been reserved
[ 0.569111] system 00:07: ioport range 0x6800-0x68fe has been reserved
[ 0.569114] system 00:07: ioport range 0x6900-0x69fe has been reserved
[ 0.569117] system 00:07: ioport range 0x6a00-0x6afe has been reserved
[ 0.569121] system 00:07: ioport range 0x6b00-0x6bfe has been reserved
[ 0.569124] system 00:07: ioport range 0x6c00-0x6cfe has been reserved
[ 0.569130] system 00:07: ioport range 0x6d00-0x6dfe has been reserved
[ 0.569134] system 00:07: ioport range 0x6e00-0x6efe has been reserved
[ 0.569138] system 00:07: ioport range 0x6f00-0x6ffe has been reserved
[ 0.569142] system 00:07: ioport range 0xa000-0xa0fe has been reserved
[ 0.569146] system 00:07: ioport range 0xa100-0xa1fe has been reserved
[ 0.569150] system 00:07: ioport range 0xa200-0xa2fe has been reserved
[ 0.569153] system 00:07: ioport range 0xa300-0xa3fe has been reserved
[ 0.569157] system 00:07: ioport range 0xa400-0xa4fe has been reserved
[ 0.569161] system 00:07: ioport range 0xa500-0xa5fe has been reserved
[ 0.569165] system 00:07: ioport range 0xa600-0xa6fe has been reserved
[ 0.569169] system 00:07: ioport range 0xa700-0xa7fe has been reserved
[ 0.569173] system 00:07: ioport range 0xa800-0xa8fe has been reserved
[ 0.569177] system 00:07: ioport range 0xa900-0xa9fe has been reserved
[ 0.569181] system 00:07: ioport range 0xaa00-0xaafe has been reserved
[ 0.569185] system 00:07: ioport range 0xab00-0xabfe has been reserved
[ 0.569189] system 00:07: ioport range 0xac00-0xacfe has been reserved
[ 0.569193] system 00:07: ioport range 0xad00-0xadfe has been reserved
[ 0.569197] system 00:07: ioport range 0xae00-0xaefe has been reserved
[ 0.569201] system 00:07: ioport range 0xaf00-0xaffe has been reserved
[ 0.569205] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.569208] system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 0.603883] AppArmor: AppArmor Filesystem Enabled
[ 0.603897] pci 0000:04:02.0: BAR 6: address space collision on of device [0xdfb00000-0xdfb0ffff]
[ 0.603931] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.603935] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.603940] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfffffff
[ 0.603944] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff
[ 0.603948] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.603950] pci 0000:00:1c.0: IO window: disabled
[ 0.603955] pci 0000:00:1c.0: MEM window: 0xdfd00000-0xdfdfffff
[ 0.603959] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.603963] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.603965] pci 0000:00:1c.1: IO window: disabled
[ 0.603970] pci 0000:00:1c.1: MEM window: 0xdfc00000-0xdfcfffff
[ 0.603974] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.603980] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.603984] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.603989] pci 0000:00:1e.0: MEM window: 0xdfa00000-0xdfbfffff
[ 0.604008] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff
[ 0.604021] alloc irq_desc for 16 on node -1
[ 0.604024] alloc kstat_irqs on node -1
[ 0.604030] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.604035] pci 0000:00:01.0: setting latency timer to 64
[ 0.604043] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.604048] pci 0000:00:1c.0: setting latency timer to 64
[ 0.604055] alloc irq_desc for 17 on node -1
[ 0.604057] alloc kstat_irqs on node -1
[ 0.604061] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.604065] pci 0000:00:1c.1: setting latency timer to 64
[ 0.604072] pci 0000:00:1e.0: setting latency timer to 64
[ 0.604077] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.604080] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.604083] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.604086] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfffffff]
[ 0.604088] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.604091] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfdfffff]
[ 0.604094] pci_bus 0000:03: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.604097] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
[ 0.604100] pci_bus 0000:04: resource 1 mem: [0xdfa00000-0xdfbfffff]
[ 0.604102] pci_bus 0000:04: resource 2 pref mem [0x80000000-0x800fffff]
[ 0.604105] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.604107] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.604149] NET: Registered protocol family 2
[ 0.604268] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.604619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.605120] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.605487] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.605489] TCP reno registered
[ 0.605645] NET: Registered protocol family 1
[ 0.605724] Trying to unpack rootfs image as initramfs...
[ 0.821593] Freeing initrd memory: 7475k freed
[ 0.826583] Simple Boot Flag at 0x7a set to 0x1
[ 0.826698] cpufreq-nforce2: No nForce2 chipset.
[ 0.826731] Scanning for low memory corruption every 60 seconds
[ 0.826845] audit: initializing netlink socket (disabled)
[ 0.826864] type=2000 audit(1267288506.824:1): initialized
[ 0.835183] highmem bounce pool size: 64 pages
[ 0.835191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.836604] VFS: Disk quotas dquot_6.5.2
[ 0.836663] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.837249] fuse init (API version 7.12)
[ 0.837339] msgmni has been set to 1709
[ 0.837551] alg: No test for stdrng (krng)
[ 0.837568] io scheduler noop registered
[ 0.837570] io scheduler anticipatory registered
[ 0.837573] io scheduler deadline registered
[ 0.837618] io scheduler cfq registered (default)
[ 0.837713] pci 0000:01:00.0: Boot video device
[ 0.837824] alloc irq_desc for 24 on node -1
[ 0.837827] alloc kstat_irqs on node -1
[ 0.837837] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.837844] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.837950] alloc irq_desc for 25 on node -1
[ 0.837953] alloc kstat_irqs on node -1
[ 0.837961] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.837969] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.838092] alloc irq_desc for 26 on node -1
[ 0.838095] alloc kstat_irqs on node -1
[ 0.838104] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.838113] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.838197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.838264] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.838400] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.838405] ACPI: Power Button [PWRF]
[ 0.838459] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.838466] ACPI: Power Button [VBTN]
[ 0.838871] processor LNXCPU:00: registered as cooling_device0
[ 0.876843] isapnp: Scanning for PnP cards...
[ 1.229942] isapnp: No Plug & Play device found
[ 1.231276] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.232642] brd: module loaded
[ 1.233119] loop: module loaded
[ 1.233203] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.233318] ata_piix 0000:00:1f.2: version 2.13
[ 1.233335] alloc irq_desc for 20 on node -1
[ 1.233337] alloc kstat_irqs on node -1
[ 1.233345] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.233351] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.388017] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.388096] scsi0 : ata_piix
[ 1.388189] scsi1 : ata_piix
[ 1.388227] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.388231] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.389090] Fixed MDIO Bus: probed
[ 1.389134] PPP generic driver version 2.4.2
[ 1.389234] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.389253] alloc irq_desc for 21 on node -1
[ 1.389255] alloc kstat_irqs on node -1
[ 1.389261] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.389275] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.389280] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.389333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.393239] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.393246] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.393476] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 1.408010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.408096] usb usb1: configuration #1 chosen from 1 choice
[ 1.408130] hub 1-0:1.0: USB hub found
[ 1.408140] hub 1-0:1.0: 8 ports detected
[ 1.408212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.408231] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.408260] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.408269] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.408272] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.408308] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.408333] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 1.408415] usb usb2: configuration #1 chosen from 1 choice
[ 1.408448] hub 2-0:1.0: USB hub found
[ 1.408457] hub 2-0:1.0: 2 ports detected
[ 1.408509] alloc irq_desc for 22 on node -1
[ 1.408512] alloc kstat_irqs on node -1
[ 1.408517] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.408524] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.408527] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.408560] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.408591] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 1.408669] usb usb3: configuration #1 chosen from 1 choice
[ 1.408706] hub 3-0:1.0: USB hub found
[ 1.408715] hub 3-0:1.0: 2 ports detected
[ 1.408768] alloc irq_desc for 18 on node -1
[ 1.408771] alloc kstat_irqs on node -1
[ 1.408776] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.408783] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.408787] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.408824] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.408854] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.408934] usb usb4: configuration #1 chosen from 1 choice
[ 1.408964] hub 4-0:1.0: USB hub found
[ 1.408973] hub 4-0:1.0: 2 ports detected
[ 1.409022] alloc irq_desc for 23 on node -1
[ 1.409024] alloc kstat_irqs on node -1
[ 1.409029] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.409037] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.409041] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.409073] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.409104] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 1.409184] usb usb5: configuration #1 chosen from 1 choice
[ 1.409215] hub 5-0:1.0: USB hub found
[ 1.409224] hub 5-0:1.0: 2 ports detected
[ 1.409329] PNP: No PS/2 controller found. Probing ports directly.
[ 1.411891] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.411898] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.411963] mice: PS/2 mouse device common for all mice
[ 1.412084] rtc_cmos 00:05: RTC can wake from S4
[ 1.412122] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.412148] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.412265] device-mapper: uevent: version 1.0.3
[ 1.412361] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.412445] device-mapper: multipath: version 1.1.0 loaded
[ 1.412449] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.412570] EISA: Probing bus 0 at eisa.0
[ 1.412574] EISA: Cannot allocate resource for mainboard
[ 1.412580] Cannot allocate resource for EISA slot 2
[ 1.412589] Cannot allocate resource for EISA slot 5
[ 1.412592] Cannot allocate resource for EISA slot 6
[ 1.412602] EISA: Detected 0 cards.
[ 1.412649] cpuidle: using governor ladder
[ 1.412652] cpuidle: using governor menu
[ 1.413224] TCP cubic registered
[ 1.413357] NET: Registered protocol family 10
[ 1.413846] lo: Disabled Privacy Extensions
[ 1.414186] NET: Registered protocol family 17
[ 1.414208] Bluetooth: L2CAP ver 2.13
[ 1.414210] Bluetooth: L2CAP socket layer initialized
[ 1.414213] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.414215] Bluetooth: SCO socket layer initialized
[ 1.414247] Bluetooth: RFCOMM TTY layer initialized
[ 1.414250] Bluetooth: RFCOMM socket layer initialized
[ 1.414252] Bluetooth: RFCOMM ver 1.11
[ 1.414285] Using IPI No-Shortcut mode
[ 1.414354] PM: Resume from disk failed.
[ 1.414369] registered taskstats version 1
[ 1.414495] Magic number: 14:729:591
[ 1.414557] rtc_cmos 00:05: setting system clock to 2010-02-27 16:35:07 UTC (1267288507)
[ 1.414561] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.414563] EDD information not available.
[ 1.556406] ata1.00: ATA-6: ST380013AS, 8.12, max UDMA/133
[ 1.556410] ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.572367] ata1.00: configured for UDMA/133
[ 1.572493] scsi 0:0:0:0: Direct-Access ATA ST380013AS 8.12 PQ: 0 ANSI: 5
[ 1.572626] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.572671] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.572734] sd 0:0:0:0: [sda] Write Protect is off
[ 1.572737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.572768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.572930] sda:
[ 1.580309] ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H492C, DE02, max UDMA/33
[ 1.589698] sda1 sda2 < sda5 >
[ 1.600894] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.612233] ata2.00: configured for UDMA/33
[ 1.613021] scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H492C DE02 PQ: 0 ANSI: 5
[ 1.615931] sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
[ 1.615936] Uniform CD-ROM driver Revision: 3.20
[ 1.616021] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.616074] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.616100] Freeing unused kernel memory: 544k freed
[ 1.616472] Write protecting the kernel text: 4592k
[ 1.616525] Write protecting the kernel read-only data: 1836k
[ 1.814943] Linux agpgart interface v0.103
[ 1.822165] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.822200] via-rhine 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.836328] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 1.894519] eth0: VIA Rhine III at 0xdfafff00, 00:26:5a:71:66:89, IRQ 18.
[ 1.895232] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 2.113155] usb 1-3: configuration #1 chosen from 1 choice
[ 2.372013] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.556520] usb 2-1: configuration #1 chosen from 1 choice
[ 2.565760] usbcore: registered new interface driver hiddev
[ 2.579682] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 2.579765] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 2.579787] usbcore: registered new interface driver usbhid
[ 2.579791] usbhid: v2.6:USB HID core driver
[ 2.808047] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.814343] EXT4-fs (sda5): barriers enabled
[ 2.830972] kjournald2 starting: pid 340, dev sda5:8, commit interval 5 seconds
[ 2.830986] EXT4-fs (sda5): delayed allocation enabled
[ 2.830991] EXT4-fs: file extents enabled
[ 2.835468] EXT4-fs: mballoc enabled
[ 2.835483] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.984549] usb 2-2: configuration #1 chosen from 1 choice
[ 3.000701] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[ 3.000801] generic-usb 0003:046D:C03D.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 3.410697] type=1505 audit(1267288509.495:2): operation="profile_load" pid=367 name=/usr/share/gdm/guest-session/Xsession
[ 3.413683] type=1505 audit(1267288509.497:3): operation="profile_load" pid=368 name=/sbin/dhclient3
[ 3.414372] type=1505 audit(1267288509.497:4): operation="profile_load" pid=368 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.414745] type=1505 audit(1267288509.497:5): operation="profile_load" pid=368 name=/usr/lib/connman/scripts/dhclient-script
[ 3.469650] type=1505 audit(1267288509.553:6): operation="profile_load" pid=369 name=/usr/bin/evince
[ 3.480927] type=1505 audit(1267288509.565:7): operation="profile_load" pid=369 name=/usr/bin/evince-previewer
[ 3.487572] type=1505 audit(1267288509.569:8): operation="profile_load" pid=369 name=/usr/bin/evince-thumbnailer
[ 3.506160] type=1505 audit(1267288509.589:9): operation="profile_load" pid=371 name=/usr/lib/cups/backend/cups-pdf
[ 3.506960] type=1505 audit(1267288509.589:10): operation="profile_load" pid=371 name=/usr/sbin/cupsd
[ 13.560538] udev: starting version 147
[ 13.651658] EXT4-fs (sda5): internal journal on sda5:8
[ 13.652083] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.652087] Disabling lock debugging due to kernel taint
[ 13.980875] [fglrx] Maximum main memory to use for locked dma buffers: 1884 MBytes.
[ 13.980965] [fglrx] vendor: 1002 device: 9490 count: 1
[ 13.981137] [fglrx] ioport: bar 4, base 0xdc00, size: 0x100
[ 13.981154] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.981161] pci 0000:01:00.0: setting latency timer to 64
[ 13.981287] [fglrx] Kernel PAT support is enabled
[ 13.981312] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors
[ 14.051649] intel_rng: Firmware space is locked read-only. If you can't or
[ 14.051652] intel_rng: don't want to disable this in firmware setup, and if
[ 14.051653] intel_rng: you are certain that your system has a functional
[ 14.051655] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 14.135407] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.136252] dell-wmi: No known WMI GUID found
[ 14.158767] Linux video capture interface: v2.00
[ 14.198518] C-Media PCI 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.224926] lp: driver loaded but no devices found
[ 14.271545] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.271582] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 14.285687] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.445821] usbcore: registered new interface driver snd-usb-audio
[ 14.447308] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804)
[ 14.462051] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input5
[ 14.462119] usbcore: registered new interface driver uvcvideo
[ 14.462124] USB Video Class driver (v0.1.0)
[ 14.543621] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.794790] __ratelimit: 3 callbacks suppressed
[ 14.794795] type=1505 audit(1267313720.877:12): operation="profile_replace" pid=888 name=/usr/share/gdm/guest-session/Xsession
[ 14.806705] type=1505 audit(1267313720.889:13): operation="profile_replace" pid=894 name=/sbin/dhclient3
[ 14.807398] type=1505 audit(1267313720.889:14): operation="profile_replace" pid=894 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.807772] type=1505 audit(1267313720.889:15): operation="profile_replace" pid=894 name=/usr/lib/connman/scripts/dhclient-script
[ 14.814652] type=1505 audit(1267313720.897:16): operation="profile_replace" pid=897 name=/usr/bin/evince
[ 14.838856] type=1505 audit(1267313720.921:17): operation="profile_replace" pid=897 name=/usr/bin/evince-previewer
[ 14.857794] type=1505 audit(1267313720.941:18): operation="profile_replace" pid=897 name=/usr/bin/evince-thumbnailer
[ 14.868800] type=1505 audit(1267313720.953:19): operation="profile_replace" pid=902 name=/usr/lib/cups/backend/cups-pdf
[ 14.869603] type=1505 audit(1267313720.953:20): operation="profile_replace" pid=902 name=/usr/sbin/cupsd
[ 14.893720] type=1505 audit(1267313720.977:21): operation="profile_replace" pid=903 name=/usr/sbin/tcpdump
[ 15.975782] alloc irq_desc for 27 on node -1
[ 15.975787] alloc kstat_irqs on node -1
[ 15.975800] fglrx_pci 0000:01:00.0: irq 27 for MSI/MSI-X
[ 15.976489] [fglrx] Firegl kernel thread PID: 1129
[ 16.178482] ppdev: user-space parallel port driver
[ 17.122837] CPU0 attaching NULL sched-domain.
[ 17.122882] CPU0 attaching NULL sched-domain.
[ 17.216358] [fglrx] Gart USWC size:627 M.
[ 17.216363] [fglrx] Gart cacheable size:247 M.
[ 17.216370] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 17.216373] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[ 17.216377] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[ 18.849146] CPU0 attaching NULL sched-domain.
[ 18.849190] CPU0 attaching NULL sched-domain.
[ 20.859362] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[ 25.148013] eth0: no IPv6 routers present
[ 73.589480] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

[SkittleLinux18]

Ok, so I tried again to get Rhythmbox to work in Ubuntu while on the LiveCD. This time, when I opted to install mp3 support, I got a message telling me:

No packages with requested plugins found

The requested plugins are:

MPEG-1 Layer 3 (MP3) decoder

I don't understand why it has all of a sudden become so difficult to get mp3 support in Linux now.

[SkittleLinux18]

Well, I can't find the answer. I havn't been looking 24/7, but there's only so much looking I can do. Since I haven't heard from anyone, I'm assuming no one really knows what the issue is. So I am going to just switch distros. I did report the bug to Ubuntu.

Thanks anyways, guys.

[zenwalker]

Tried to post a reply last night, but was stopped. Too many rules in this place-- I'm outta here. Try Element. my friend.It's Ubuntu-based.