Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
Hellow everybody! I have recently acquired a Toshiba Satellite L500-ST5507: Intel I5 430 Processor, DDR3 memory, Intel Integrated Graphics, Intel 5 series 4 port SATA AHCI Controller, Realtek RTL 8191SE ...
  1. #1
    Just Joined!
    Join Date
    May 2010
    Posts
    8

    [SOLVED] Ubuntu 10.04 wont boot

    Hellow everybody!
    I have recently acquired a Toshiba Satellite L500-ST5507:
    Intel I5 430 Processor, DDR3 memory, Intel Integrated Graphics, Intel 5 series 4 port SATA AHCI Controller, Realtek RTL 8191SE Wireless LAN, Intel 5 series/3400 series Chipset family USB Enhanced Host controller 3B34.
    In this laptop, I have been able to boot ubuntu 9.01, though i couldnt get the wireless to work (among other things).
    Now, I wanted to try Ubuntu 10.04, but I find that I can not even boot the computer. Wen I boot from the live cd, I can see the menu screen, but when I choose the "try without installing" option, all I get is a screen full of weird messages, the last two of them are:
    [0.600438][<c0104087>] kernel_thread_helper + 0x7/0x10
    [0.600375][<c07a3308>] kernel_init + 0x0/0xbf
    I tryed wubi installation, but the same screen comes up when rebooting.
    I will be thankful if anybody can explain me what is happening here and if there is some way to solve this problems in order to install ubuntu in a dual boot mode in this laptop.

  2. #2
    Linux Guru Rubberman's Avatar
    Join Date
    Apr 2009
    Location
    I can be found either 40 miles west of Chicago, or in a galaxy far, far away.
    Posts
    8,975
    You should boot into the BIOS and look at the settings there. Since these systems are shipped with Windows there may be some issues with how the BIOS is configured, especially regarding to legacy USB or sata->pata translations, etc. In truth, I've had very few problems running Linux on Toshiba laptops and netbooks, although it is possible that there is some problem wtih this one. The other possibility is that your boot disc is corrupted.
    Sometimes, real fast is almost as good as real time.
    Just remember, Semper Gumbi - always be flexible!

  3. #3
    Just Joined!
    Join Date
    May 2010
    Posts
    8

    Re-Ubuntu wont boot

    Thankyou Rubberman!
    What is exactly what I should look at in the BIOS settings? About SATA controllers, I found the following options, * meanscurrently selected item.
    SATA interface setting
    [Performance]*
    [Battery life]
    eSATA
    [Enabled]*
    [Disabled]
    Advanced->System Configuration->Sata Controller Mode
    [AHCI]*
    [Compatibility]

    The only option I tried changing is de AHCI mode to Compatibility mode, but the same messages come up during livecd boot.
    About the corrupted Disc... Do you refer to the hard disc on the laptop or to the live cd? I have burned the iso images 3 times in differnt discs, the last one is a DVD, though I havent tryed them in other computers I think this is not the problem.
    Thankyou for your help!

  4. #4
    Linux Guru rokytnji's Avatar
    Join Date
    Jul 2008
    Location
    Pecos, Texas
    Posts
    2,946
    Do you refer to the hard disc on the laptop or to the live cd?
    He is refering to the Live CD. Usually before burning a ISO to a CD or DVD. We md5sum check the Iso.

    https://help.ubuntu.com/community/HowToMD5SUM

    Then burn the Iso at the slowest speed possible on the burning program you are using. Strange that the same error comes up with a wubi install. But I know nada about using wubi as I don't run Linux inside of Windows.
    Linux Registered User # 475019
    Lead,Follow, or get the heck out of the way
    AntiX,Puppy,Ubuntu,Windows 7=(cuz of scooters)
    Open CourseWare for Linux Geeks

  5. #5
    Super Moderator devils casper's Avatar
    Join Date
    Jun 2006
    Location
    Chandigarh, India
    Posts
    24,316
    I would suggest you to try same LiveCD on other machine and check if it boots up fine.
    It is amazing what you can accomplish if you do not care who gets the credit.
    New Users: Read This First

  6. #6
    Just Joined!
    Join Date
    May 2010
    Posts
    8
    Thank you all for your responses!
    At the moment, I have successfully booted and installed ubuntu 10.04 in a VirtualBox machine, using the same live cd. In Addition, I run md5 as suggested by rokytnji and got:

    d044a2a0c8103fc3e5b7e18b0f7de1c8 ubuntu-10.04-desktop-i386.iso

    which is in agreement with one of the entries in the Ubuntu Hashes page. I can try it in other computers as soon as I have them available.

    I will be thankful with any other ideas on solving this issue.

  7. #7
    Linux Guru Rubberman's Avatar
    Join Date
    Apr 2009
    Location
    I can be found either 40 miles west of Chicago, or in a galaxy far, far away.
    Posts
    8,975
    Well, if it boots a 9.04 disc, but not your validated 10.04 disc, then there is likely some issue with 10.04 on this hardware. If that is the case, then I'm sure the folks at Canonical would like to know. Post this information on their user forums to see if either they have run into the problems or not. Since 10.04 is so newly out of the lab, it is entirely possible that there are problems.
    Sometimes, real fast is almost as good as real time.
    Just remember, Semper Gumbi - always be flexible!

  8. #8
    Linux User hatebreed's Avatar
    Join Date
    May 2010
    Posts
    332
    have you tried to disable acpi in bios yet? I have had issues with this on a couple of systems and by disabling it the problem went away. Not the same issue through but worth a shot.

  9. #9
    Just Joined!
    Join Date
    May 2010
    Posts
    8

    Re-Ubuntu wont boot

    Tank you all again.
    Please forgive my newbe-ness, I cant find an ACPI option in the bios settings. I could not find a sensible tutotial on InsydeH20 Bios, which I read is responsible of many issues in toshiba laptops. This guys at canonical did not answer my question yet. Actually, I found someone else has a very similar problem, but he did not get any answer either. Do you think I should try another distro?

  10. #10
    Linux Guru rokytnji's Avatar
    Join Date
    Jul 2008
    Location
    Pecos, Texas
    Posts
    2,946
    Do you think I should try another distro?
    That is the beauty of using Linux Live Cds. You can experiment with what works and what does not work. If One distro doesn't support your hardware. Another distro may be able to. You only lose the price of a blank CD. Unless your gear can boot cdrws or usb. Then all that is lost is a little time and effort.

    The LiveCD List

    DistroWatch.com: Put the fun back into computing. Use Linux, BSD.
    Linux Registered User # 475019
    Lead,Follow, or get the heck out of the way
    AntiX,Puppy,Ubuntu,Windows 7=(cuz of scooters)
    Open CourseWare for Linux Geeks

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
...