can't get photos off camera

[Hogweed]

Hello all – after 20 years as a hardened Windows man, I decided to try Linux, and installed Ubuntu. Good bits – I really like it, it takes about a tenth the time to boot and lots of other things. And it's not Microsfot. Bad bits – various hardware-related issues, and I just can't seem to get any support. I've posted messages on the official Ubuntu forum, but nobody responds.

So I have the feeling that, for all but expert users, Linux (or maybe just Ubuntu!) isn't there yet... I'm not exactly an amateur – I repair computers (mostly Windows problems) for a living, and can't think of anything I don't know how to do in that environment. When I DO get an obscure issue, I go on the Microsfot forums, and almost always get a fast and courteous reply.

I think it's a bit sad that I'm utterly cynical about Microsoft, but find a friendly and helpful environment to move around in there; am totally behind the Linux objective, but seem to be looking into a clique I don't belong to...

My most pressing current problem is that I can't get photos off my camera. I have no driver for it, so can't simply plug its cable into a USB port, and drag and drop. My laptop has a card reader, but to get Ubuntu to recognise that, I have to put the SD card in, then reboot the machine!

Can anyone help me at all, or should I go back to Windows for another few years till Linux is ready for normal use?

Thanks...

[Irithori]

Well, if that camera behaves like a usb storage,
then it *is* as easy as plugging it in.


But if not, some info is required.
Like the name of your camera and the USB id.
You can get the later by issuing as root or via sudo:

lsusb

And are you sure nothing happens, when you insert a sd card?
Please insert one and paste the output of the following commands (again: sudo or as root) in CODE tags:

dmesg
fdisk -l
mount

[Hogweed]

Well, if that camera behaves like a usb storage,
then it *is* as easy as plugging it in.

How did you DO that??? I plugged it in to follow your instructions, and it !)£&@@(£! came up as a disk this time, just like Windows!!!

I swear by Almighty Bog that has never happened before.

OK, I'm going to try the SD card on its own now. Now THAT won't work.

.
..
…
….

Hah! Thought not. Got you.

Thanks for being so helpful though

[HROAdmin26]

Bears repeating:

And are you sure nothing happens, when you insert a sd card?
Please insert one and paste the output of the following commands (again: sudo or as root) in CODE tags:

dmesg
fdisk -l
mount

[Hogweed]

Ummm... OK, will give it a go – if I can Google what a “code tag” is!

See how hard it is for the uninitiated...

No, can't figure out what code tags are I'm afraid, so entered the commands one after the other:

roger@pavilion:~$ mount

/dev/sda5 on / type ext4 (rw,errors=remount-ro)

proc on /proc type proc (rw,noexec,nosuid,nodev)

none on /sys type sysfs (rw,noexec,nosuid,nodev)

none on /sys/fs/fuse/connections type fusectl (rw)

none on /sys/kernel/debug type debugfs (rw)

none on /sys/kernel/security type securityfs (rw)

none on /dev type devtmpfs (rw,mode=0755)

none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)

none on /dev/shm type tmpfs (rw,nosuid,nodev)

none on /var/run type tmpfs (rw,nosuid,mode=0755)

none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)

none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)

binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)

gvfs-fuse-daemon on /home/roger/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=roger)

/dev/sda1 on /media/36984CC960784648 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

roger@pavilion:~$

Does that help?

[Hogweed]

Ah, is it like HTML?

[   18.057274] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   18.057280] pci 0000:01:00.0: setting latency timer to 64
[   18.057427] [fglrx] Kernel PAT support is enabled
[   18.057455] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[   18.087283] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input8
[   18.087347] usbcore: registered new interface driver uvcvideo
[   18.087350] USB Video Class driver (v0.1.0)
[   18.142486] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   18.143310] Registered led device: ath9k-phy0::radio
[   18.143328] Registered led device: ath9k-phy0::assoc
[   18.143346] Registered led device: ath9k-phy0::tx
[   18.143363] Registered led device: ath9k-phy0::rx
[   18.143377] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8a80000, irq=17
[   18.171569] Console: switching to colour frame buffer device 80x30
[   18.188195] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.188273] HDA Intel 0000:00:14.2: setting latency timer to 64
[   18.296142] type=1505 audit(1279298503.904:5):  operation="profile_load" pid=823 name="/usr/share/gdm/guest-session/Xsession"
[   18.298057] type=1505 audit(1279298503.908:6):  operation="profile_replace" pid=824 name="/sbin/dhclient3"
[   18.298347] type=1505 audit(1279298503.908:7):  operation="profile_replace" pid=824 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.298511] type=1505 audit(1279298503.908:8):  operation="profile_replace" pid=824 name="/usr/lib/connman/scripts/dhclient-script"
[   18.302864] type=1505 audit(1279298503.912:9):  operation="profile_load" pid=825 name="/usr/bin/evince"
[   18.306629] type=1505 audit(1279298503.912:10):  operation="profile_load" pid=825 name="/usr/bin/evince-previewer"
[   18.309080] type=1505 audit(1279298503.920:11):  operation="profile_load" pid=825 name="/usr/bin/evince-thumbnailer"
[   18.320276] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[   18.336997] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   18.337103] input: HDA ATI SB Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   18.339965] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   18.340032] HDA Intel 0000:01:00.1: setting latency timer to 64
[   18.362767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.370312] r8169: eth0: link down
[   18.370531] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.720923] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[   18.791887] Bluetooth: L2CAP ver 2.14
[   18.791893] Bluetooth: L2CAP socket layer initialized
[   18.800690] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.800695] Bluetooth: BNEP filters: protocol multicast
[   18.812337] Bridge firewalling registered
[   18.813991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[   18.830814] Bluetooth: SCO (Voice Link) ver 0.6
[   18.830819] Bluetooth: SCO socket layer initialized
[   18.875941] ppdev: user-space parallel port driver
[   18.947655] Bluetooth: RFCOMM TTY layer initialized
[   18.947662] Bluetooth: RFCOMM socket layer initialized
[   18.947664] Bluetooth: RFCOMM ver 1.11
[   19.288941]   alloc irq_desc for 31 on node -1
[   19.288945]   alloc kstat_irqs on node -1
[   19.288960] fglrx_pci 0000:01:00.0: irq 31 for MSI/MSI-X
[   19.289760] [fglrx] Firegl kernel thread PID: 1171
[   19.290007] [fglrx] IRQ 31 Enabled
[   19.290069] CPU0 attaching NULL sched-domain.
[   19.290078] CPU1 attaching NULL sched-domain.
[   19.368087] CPU0 attaching sched-domain:
[   19.368092]  domain 0: span 0-1 level MC
[   19.368095]   groups: 0 1
[   19.368101] CPU1 attaching sched-domain:
[   19.368104]  domain 0: span 0-1 level MC
[   19.368106]   groups: 1 0
[   19.614588] [fglrx] Gart USWC size:943 M.
[   19.614593] [fglrx] Gart cacheable size:373 M.
[   19.614600] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   19.614603] [fglrx] Reserved FB block: Unshared offset:fd0b000, size:2f5000 
[   19.614606] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 
[   23.248245] CPU0 attaching NULL sched-domain.
[   23.248254] CPU1 attaching NULL sched-domain.
[   23.276614] CPU0 attaching sched-domain:
[   23.276619]  domain 0: span 0-1 level MC
[   23.276623]   groups: 0 1
[   23.276630] CPU1 attaching sched-domain:
[   23.276632]  domain 0: span 0-1 level MC
[   23.276635]   groups: 1 0
[   24.086406] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   25.638183] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)
[   25.638214] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)
[   25.638239] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)
[   25.643050] wlan0: direct probe responded
[   25.643056] wlan0: authenticate with AP 00:24:17:65:5b:23 (try 1)
[   25.648647] wlan0: authenticated
[   25.648668] wlan0: associate with AP 00:24:17:65:5b:23 (try 1)
[   25.653243] wlan0: RX AssocResp from 00:24:17:65:5b:23 (capab=0x411 status=0 aid=1)
[   25.653247] wlan0: associated
[   25.662554] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.810390] padlock: VIA PadLock not detected.
[   36.260015] wlan0: no IPv6 routers present
[  659.356597] ath9k: Failed to stop TX DMA in 100 msec after killing last frame
[  659.356631] ath9k: Unable to stop TxDMA. Reset HAL!
[  971.996323] CPU0 attaching NULL sched-domain.
[  971.996336] CPU1 attaching NULL sched-domain.
[  972.024165] CPU0 attaching sched-domain:
[  972.024173]  domain 0: span 0-1 level MC
[  972.024180]   groups: 0 1
[  972.024191] CPU1 attaching sched-domain:
[  972.024196]  domain 0: span 0-1 level MC
[  972.024201]   groups: 1 0
[  973.120110] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)
[  975.164457] PM: Syncing filesystems ... done.
[  975.384167] PM: Preparing system for mem sleep
[  975.384173] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  975.385206] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  975.385279] PM: Entering mem sleep
[  975.385298] Suspending console(s) (use no_console_suspend to debug)
[  975.448254] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  975.448439] sd 2:0:0:0: [sda] Stopping disk
[  975.932173] PM: suspend of drv:sd dev:2:0:0:0 complete after 483.920 msecs
[  975.932408] btusb_intr_complete: hci0 urb f20d6280 failed to resubmit (1)
[  975.933395] btusb_bulk_complete: hci0 urb f20d6200 failed to resubmit (1)
[  975.934394] btusb_bulk_complete: hci0 urb f20d6d00 failed to resubmit (1)
[  976.406013] PM: suspend of drv:psmouse dev:serio1 complete after 441.875 msecs
[  976.508066] PM: suspend of drv:atkbd dev:serio0 complete after 102.048 msecs
[  976.513389] ath9k 0000:08:00.0: PCI INT A disabled
[  976.632391] HDA Intel 0000:01:00.1: PCI INT B disabled
[  976.632453] ACPI handle has no context!
[  976.648170] PM: suspend of drv:HDA Intel dev:0000:01:00.1 complete after 120.071 msecs
[  976.648283] [fglrx] IRQ 31 Disabled
[  976.648322] [fglrx] Preparing suspend fglrx in kernel.
[  977.536665] [fglrx] Suspending fglrx in kernel completed.
[  977.536671] [fglrx] Power down the ASIC .
[  977.536828] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 888.651 msecs
[  977.640545] HDA Intel 0000:00:14.2: PCI INT A disabled
[  977.640594] ACPI handle has no context!
[  977.656077] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.218 msecs
[  977.656202] ehci_hcd 0000:00:13.2: PCI INT B disabled
[  977.656216] ohci_hcd 0000:00:13.1: PCI INT A disabled
[  977.656229] ohci_hcd 0000:00:13.0: PCI INT A disabled
[  977.656240] ehci_hcd 0000:00:12.2: PCI INT B disabled
[  977.656251] ohci_hcd 0000:00:12.1: PCI INT A disabled
[  977.656261] ohci_hcd 0000:00:12.0: PCI INT A disabled
[  977.704417] ahci 0000:00:11.0: PCI INT A disabled
[  977.721303] PM: suspend of devices complete after 2335.699 msecs
[  977.721307] PM: suspend devices took 2.336 seconds
[  977.721790] r8169 0000:09:00.0: PME# enabled
[  977.768494] PM: late suspend of devices complete after 47.178 msecs
[  977.768586] ACPI: Preparing to enter system sleep state S3
[  977.828097] Disabling non-boot CPUs ...
[  977.828125] CPU0 attaching NULL sched-domain.
[  977.828129] CPU1 attaching NULL sched-domain.
[  977.892288] CPU0 attaching NULL sched-domain.
[  977.893619] Breaking affinity for irq 1
[  977.893653] Breaking affinity for irq 17
[  977.893661] Breaking affinity for irq 22
[  977.893913] Breaking affinity for irq 31
[  977.996285] CPU 1 is now offline
[  977.996287] SMP alternatives: switching to UP code
[  978.002184] Back to C!
[  978.002184] Enabling non-boot CPUs ...
[  978.002184] SMP alternatives: switching to SMP code
[  978.007830] Booting processor 1 APIC 0x1 ip 0x6000
[  978.001638] Initializing CPU#1
[  978.001638] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[  978.001638] CPU: L2 Cache: 512K (64 bytes/line)
[  978.001638] CPU: Physical Processor ID: 0
[  978.001638] CPU: Processor Core ID: 1
[  978.096141] CPU1: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01
[  978.096246] CPU0 attaching NULL sched-domain.
[  978.124260] CPU0 attaching sched-domain:
[  978.124264]  domain 0: span 0-1 level MC
[  978.124267]   groups: 0 1
[  978.124272] CPU1 attaching sched-domain:
[  978.124274]  domain 0: span 0-1 level MC
[  978.124277]   groups: 1 0
[  978.124898] CPU1 is up
[  978.125114] ACPI: Waking up from system sleep state S3
[  978.163029] pcieport 0000:00:02.0: restoring config space at offset 0x7 (was 0x20005151, writing 0x5151)
[  978.163039] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  978.163118] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  978.163204] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  978.163285] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x20002121, writing 0x2121)
[  978.163292] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  978.163374] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  978.163428] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)
[  978.163471] ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
[  978.176126] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[  978.176169] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
[  978.192293] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[  978.192585] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403)
[  978.192782] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[  978.192879] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[  978.193362] PM: early resume of devices complete after 30.507 msecs
[  978.220586] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  978.220735] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  978.244075] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  978.268262] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  978.268281] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  978.292263] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  978.316263] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[  978.317481] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  978.317586] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[  978.317596] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[  978.317604] fglrx_pci 0000:01:00.0: setting latency timer to 64
[  978.320422] [fglrx] Power up the ASIC
[  978.320438] [fglrx] Preparing resume fglrx in kernel.
[  978.365569] [fglrx] Resuming fglrx in kernel completed.
[  978.365734] [fglrx] IRQ 31 Enabled
[  978.365798] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[  978.365807] HDA Intel 0000:01:00.1: setting latency timer to 64
[  978.365879] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  978.365903] r8169 0000:09:00.0: PME# disabled
[  978.540110] ata5: SATA link down (SStatus 0 SControl 300)
[  978.704073] ata4: softreset failed (device not ready)
[  978.704077] ata4: applying SB600 PMP SRST workaround and retrying
[  978.716069] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[  978.868041] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  978.881762] ata4.00: configured for UDMA/100
[  978.883866] PM: resume of drv:usb dev:1-3 complete after 352.820 msecs
[  978.928385] sd 2:0:0:0: [sda] Starting disk
[  980.048033] ata3: softreset failed (device not ready)
[  980.048036] ata3: applying SB600 PMP SRST workaround and retrying
[  980.212034] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  980.226998] ata3.00: configured for UDMA/100
[  980.258097] PM: resume of drv:sd dev:2:0:0:0 complete after 1329.713 msecs
[  980.262829] PM: resume of devices complete after 2069.431 msecs
[  980.263053] PM: resume devices took 2.068 seconds
[  980.263092] PM: Finishing wakeup.
[  980.263094] Restarting tasks ... done.
[  980.586022] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  980.592778] r8169: eth0: link down
[  980.593013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  981.108949] CPU0 attaching NULL sched-domain.
[  981.108958] CPU1 attaching NULL sched-domain.
[  981.145075] CPU0 attaching sched-domain:
[  981.145083]  domain 0: span 0-1 level MC
[  981.145089]   groups: 0 1
[  981.145099] CPU1 attaching sched-domain:
[  981.145104]  domain 0: span 0-1 level MC
[  981.145109]   groups: 1 0
[  986.789272] ath9k: Two wiphys trying to scan at the same time
[  986.789359] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)
[  986.989201] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)
[  987.188056] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 2)
[  987.388087] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 3)
[  987.392381] wlan0: direct probe responded
[  987.392390] wlan0: authenticate with AP 00:24:17:65:5b:23 (try 1)
[  987.394526] wlan0: authenticated
[  987.394563] wlan0: associate with AP 00:24:17:65:5b:23 (try 1)
[  987.398905] wlan0: RX AssocResp from 00:24:17:65:5b:23 (capab=0x411 status=0 aid=1)
[  987.398911] wlan0: associated
[  987.408508] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  997.460034] wlan0: no IPv6 routers present
[ 5680.316057] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 5680.491345] usb 3-1: configuration #1 chosen from 1 choice
[ 5680.547963] Initializing USB Mass Storage driver...
[ 5680.548465] scsi5 : SCSI emulation for USB Mass Storage devices
[ 5680.549160] usbcore: registered new interface driver usb-storage
[ 5680.549169] USB Mass Storage support registered.
[ 5680.552717] usb-storage: device found at 2
[ 5680.552721] usb-storage: waiting for device to settle before scanning
[ 5685.553222] usb-storage: device scan complete
[ 5685.559168] scsi 5:0:0:0: Direct-Access     NIKON    NIKON DSC E7900  1.00 PQ: 0 ANSI: 2
[ 5685.560112] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 5685.571253] sd 5:0:0:0: [sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB)
[ 5685.577135] sd 5:0:0:0: [sdb] Write Protect is off
[ 5685.577143] sd 5:0:0:0: [sdb] Mode Sense: 18 00 00 08
[ 5685.577150] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 5685.601118] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 5685.601129]  sdb: sdb1
[ 5685.632148] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 5685.632162] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 5772.570016] usb 3-1: USB disconnect, address 2
[ 5780.760033] usb 3-1: new full speed USB device using ohci_hcd and address 3
[ 5780.939351] usb 3-1: configuration #1 chosen from 1 choice
[ 5780.941436] scsi6 : SCSI emulation for USB Mass Storage devices
[ 5780.941741] usb-storage: device found at 3
[ 5780.941746] usb-storage: waiting for device to settle before scanning
[ 5785.941213] usb-storage: device scan complete
[ 5785.947168] scsi 6:0:0:0: Direct-Access     NIKON    NIKON DSC E7900  1.00 PQ: 0 ANSI: 2
[ 5785.949305] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5785.960163] sd 6:0:0:0: [sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB)
[ 5785.966119] sd 6:0:0:0: [sdb] Write Protect is off
[ 5785.966122] sd 6:0:0:0: [sdb] Mode Sense: 18 00 00 08
[ 5785.966126] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5785.990128] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5785.990139]  sdb: sdb1
[ 5786.021140] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5786.021152] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5795.284683] usb 3-1: USB disconnect, address 3
[ 6721.645410] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020
[ 7621.676484] ath9k: Failed to stop TX DMA in 100 msec after killing last frame
[ 7621.676514] ath9k: Unable to stop TxDMA. Reset HAL!
[ 8214.342274] CPU0 attaching NULL sched-domain.
[ 8214.342290] CPU1 attaching NULL sched-domain.
[ 8214.364637] CPU0 attaching sched-domain:
[ 8214.364644]  domain 0: span 0-1 level MC
[ 8214.364651]   groups: 0 1
[ 8214.364661] CPU1 attaching sched-domain:
[ 8214.364666]  domain 0: span 0-1 level MC
[ 8214.364671]   groups: 1 0
[ 8215.176139] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)
[ 8216.724415] PM: Syncing filesystems ... done.
[ 8216.776694] PM: Preparing system for mem sleep
[ 8216.776699] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 8216.777821] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 8216.777903] PM: Entering mem sleep
[ 8216.777923] Suspending console(s) (use no_console_suspend to debug)
[ 8216.804262] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 8216.804426] sd 2:0:0:0: [sda] Stopping disk
[ 8217.288076] PM: suspend of drv:sd dev:2:0:0:0 complete after 483.813 msecs
[ 8217.288732] btusb_intr_complete: hci0 urb eff7c980 failed to resubmit (1)
[ 8217.289723] btusb_bulk_complete: hci0 urb eff7c680 failed to resubmit (1)
[ 8217.290722] btusb_bulk_complete: hci0 urb eff7c180 failed to resubmit (1)
[ 8217.760362] PM: suspend of drv:psmouse dev:serio1 complete after 440.223 msecs
[ 8217.863283] ath9k 0000:08:00.0: PCI INT A disabled
[ 8217.876169] HDA Intel 0000:01:00.1: PCI INT B disabled
[ 8217.876234] ACPI handle has no context!
[ 8217.892466] [fglrx] IRQ 31 Disabled
[ 8217.892515] [fglrx] Preparing suspend fglrx in kernel.
[ 8218.779967] [fglrx] Suspending fglrx in kernel completed.
[ 8218.779973] [fglrx] Power down the ASIC .
[ 8218.780155] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 887.794 msecs
[ 8218.884485] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 8218.884530] ACPI handle has no context!
[ 8218.900072] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.887 msecs
[ 8218.900201] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 8218.900215] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 8218.900228] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 8218.900239] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 8218.900250] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 8218.900260] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 8218.948198] ahci 0000:00:11.0: PCI INT A disabled
[ 8218.965253] PM: suspend of devices complete after 2187.023 msecs
[ 8218.965256] PM: suspend devices took 2.188 seconds
[ 8218.965742] r8169 0000:09:00.0: PME# enabled
[ 8219.012649] PM: late suspend of devices complete after 47.384 msecs
[ 8219.012739] ACPI: Preparing to enter system sleep state S3
[ 8219.072096] Disabling non-boot CPUs ...
[ 8219.072126] CPU0 attaching NULL sched-domain.
[ 8219.072130] CPU1 attaching NULL sched-domain.
[ 8219.136288] CPU0 attaching NULL sched-domain.
[ 8219.137640] Breaking affinity for irq 9
[ 8219.137916] Breaking affinity for irq 31
[ 8219.240287] CPU 1 is now offline
[ 8219.240289] SMP alternatives: switching to UP code
[ 8219.246229] Back to C!
[ 8219.246229] Enabling non-boot CPUs ...
[ 8219.246229] SMP alternatives: switching to SMP code
[ 8219.251918] Booting processor 1 APIC 0x1 ip 0x6000
[ 8219.245687] Initializing CPU#1
[ 8219.245687] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 8219.245687] CPU: L2 Cache: 512K (64 bytes/line)
[ 8219.245687] CPU: Physical Processor ID: 0
[ 8219.245687] CPU: Processor Core ID: 1
[ 8219.340141] CPU1: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01
[ 8219.340245] CPU0 attaching NULL sched-domain.
[ 8219.368260] CPU0 attaching sched-domain:
[ 8219.368265]  domain 0: span 0-1 level MC
[ 8219.368268]   groups: 0 1
[ 8219.368273] CPU1 attaching sched-domain:
[ 8219.368275]  domain 0: span 0-1 level MC
[ 8219.368278]   groups: 1 0
[ 8219.368942] CPU1 is up
[ 8219.369158] ACPI: Waking up from system sleep state S3
[ 8219.407025] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8219.407107] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8219.407193] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8219.407277] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8219.407319] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8219.407373] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)
[ 8219.407415] ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
[ 8219.420126] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 8219.420168] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)
[ 8219.436294] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 8219.436585] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403)
[ 8219.436781] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[ 8219.436877] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8219.437359] PM: early resume of devices complete after 30.509 msecs
[ 8219.464543] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8219.464690] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8219.488076] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8219.512263] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8219.512282] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8219.536263] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8219.560262] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8219.561466] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8219.561573] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[ 8219.561582] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0
[ 8219.561592] fglrx_pci 0000:01:00.0: setting latency timer to 64
[ 8219.564419] [fglrx] Power up the ASIC
[ 8219.564434] [fglrx] Preparing resume fglrx in kernel.
[ 8219.609096] [fglrx] Resuming fglrx in kernel completed.
[ 8219.609264] [fglrx] IRQ 31 Enabled
[ 8219.609330] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8219.609339] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8219.609411] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8219.609436] r8169 0000:09:00.0: PME# disabled
[ 8219.784130] ata5: SATA link down (SStatus 0 SControl 300)
[ 8219.948069] ata4: softreset failed (device not ready)
[ 8219.948073] ata4: applying SB600 PMP SRST workaround and retrying
[ 8219.960068] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 8220.112036] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8220.120941] ata4.00: configured for UDMA/100
[ 8220.127901] PM: resume of drv:usb dev:1-3 complete after 354.051 msecs
[ 8220.172387] sd 2:0:0:0: [sda] Starting disk
[ 8221.180032] ata3: softreset failed (device not ready)
[ 8221.180036] ata3: applying SB600 PMP SRST workaround and retrying
[ 8221.344042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8221.353820] ata3.00: configured for UDMA/100
[ 8221.384921] PM: resume of drv:sd dev:2:0:0:0 complete after 1212.535 msecs
[ 8221.389637] PM: resume of devices complete after 1952.242 msecs
[ 8221.389846] PM: resume devices took 1.952 seconds
[ 8221.389882] PM: Finishing wakeup.
[ 8221.389884] Restarting tasks ... done.
[ 8221.649371] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8221.655105] r8169: eth0: link down
[ 8221.655560] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8222.081764] CPU0 attaching NULL sched-domain.
[ 8222.081772] CPU1 attaching NULL sched-domain.
[ 8222.120149] CPU0 attaching sched-domain:
[ 8222.120157]  domain 0: span 0-1 level MC
[ 8222.120163]   groups: 0 1
[ 8222.120173] CPU1 attaching sched-domain:
[ 8222.120178]  domain 0: span 0-1 level MC
[ 8222.120183]   groups: 1 0
[ 8228.013322] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)
[ 8228.213036] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)
[ 8228.217144] wlan0: direct probe responded
[ 8228.217154] wlan0: authenticate with AP 00:24:17:65:5b:23 (try 1)
[ 8228.219447] wlan0: authenticated
[ 8228.219484] wlan0: associate with AP 00:24:17:65:5b:23 (try 1)
[ 8228.223803] wlan0: RX AssocResp from 00:24:17:65:5b:23 (capab=0x411 status=0 aid=1)
[ 8228.223809] wlan0: associated
[ 8228.233417] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8239.048031] wlan0: no IPv6 routers present
roger@pavilion:~$ fdisk -l
roger@pavilion:~$ mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/roger/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=roger)
/dev/sda1 on /media/36984CC960784648 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
roger@pavilion:~$ </code>

[oz]

Ummm... OK, will give it a go – if I can Google what a “code tag” is!

Hello and welcome to the forums!

You can check this thread for information on how to use the forums, including the use of code tags and other tags in the BB code listing:

http://www.linuxforums.org/forum/com...ng-forums.html

[Hogweed]

[QUOTE=ozar;792767]Hello and welcome to the forums!

You can check this thread for information on how to use the forums, including the use of code tags and other tags in the BB code listing:


Thanks... but that seems to be about how to used HTML-type tags in postings, whereas I think I've been asked to somehow put code in a terminal window? Is it the same thing?

Sorry, I'm really confused

And... it won't let me quote your entire message, as it contains HTML, and apparently I'm not allowed to use that here yet!

[oz]

I don't believe you are reading the instructions that you are being given carefully enough. You need to run the commands in a terminal, but then post the output here, using code tags, so that the output is easier to read for those trying to help you.

[Hogweed]

OK, I'll try harder... please understand that this is difficult for me as I'm unfamiliar with the terminology. The commands I have to enter are also referred to as code, which I think is what confused me.

Right. I type sudo dmesg:

[ 8218.884485] HDA Intel 0000:00:14.2: PCI INT A disabled

[ 8218.884530] ACPI handle has no context!

[ 8218.900072] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.887 msecs

[ 8218.900201] ehci_hcd 0000:00:13.2: PCI INT B disabled

[ 8218.900215] ohci_hcd 0000:00:13.1: PCI INT A disabled

[ 8218.900228] ohci_hcd 0000:00:13.0: PCI INT A disabled

[ 8218.900239] ehci_hcd 0000:00:12.2: PCI INT B disabled

[ 8218.900250] ohci_hcd 0000:00:12.1: PCI INT A disabled

[ 8218.900260] ohci_hcd 0000:00:12.0: PCI INT A disabled

[ 8218.948198] ahci 0000:00:11.0: PCI INT A disabled

[ 8218.965253] PM: suspend of devices complete after 2187.023 msecs

[ 8218.965256] PM: suspend devices took 2.188 seconds

[ 8218.965742] r8169 0000:09:00.0: PME# enabled

[ 8219.012649] PM: late suspend of devices complete after 47.384 msecs

[ 8219.012739] ACPI: Preparing to enter system sleep state S3

[ 8219.072096] Disabling non-boot CPUs ...

[ 8219.072126] CPU0 attaching NULL sched-domain.

[ 8219.072130] CPU1 attaching NULL sched-domain.

[ 8219.136288] CPU0 attaching NULL sched-domain.

[ 8219.137640] Breaking affinity for irq 9

[ 8219.137916] Breaking affinity for irq 31

[ 8219.240287] CPU 1 is now offline

[ 8219.240289] SMP alternatives: switching to UP code

[ 8219.246229] Back to C!

[ 8219.246229] Enabling non-boot CPUs ...

[ 8219.246229] SMP alternatives: switching to SMP code

[ 8219.251918] Booting processor 1 APIC 0x1 ip 0x6000

[ 8219.245687] Initializing CPU#1

[ 8219.245687] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[ 8219.245687] CPU: L2 Cache: 512K (64 bytes/line)

[ 8219.245687] CPU: Physical Processor ID: 0

[ 8219.245687] CPU: Processor Core ID: 1

[ 8219.340141] CPU1: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01

[ 8219.340245] CPU0 attaching NULL sched-domain.

[ 8219.368260] CPU0 attaching sched-domain:

[ 8219.368265]  domain 0: span 0-1 level MC

[ 8219.368268]   groups: 0 1

[ 8219.368273] CPU1 attaching sched-domain:

[ 8219.368275]  domain 0: span 0-1 level MC

[ 8219.368278]   groups: 1 0

[ 8219.368942] CPU1 is up

[ 8219.369158] ACPI: Waking up from system sleep state S3

[ 8219.407025] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[ 8219.407107] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[ 8219.407193] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[ 8219.407277] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[ 8219.407319] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[ 8219.407373] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)

[ 8219.407415] ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)

[ 8219.420126] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)

[ 8219.420168] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)

[ 8219.436294] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)

[ 8219.436585] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403)

[ 8219.436781] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)

[ 8219.436877] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[ 8219.437359] PM: early resume of devices complete after 30.509 msecs

[ 8219.464543] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 8219.464690] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 8219.488076] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 8219.512263] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 8219.512282] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 8219.536263] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 8219.560262] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 8219.561466] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 8219.561573] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0

[ 8219.561582] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0

[ 8219.561592] fglrx_pci 0000:01:00.0: setting latency timer to 64

[ 8219.564419] [fglrx] Power up the ASIC

[ 8219.564434] [fglrx] Preparing resume fglrx in kernel.

[ 8219.609096] [fglrx] Resuming fglrx in kernel completed.

[ 8219.609264] [fglrx] IRQ 31 Enabled

[ 8219.609330] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 8219.609339] HDA Intel 0000:01:00.1: setting latency timer to 64

[ 8219.609411] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 8219.609436] r8169 0000:09:00.0: PME# disabled

[ 8219.784130] ata5: SATA link down (SStatus 0 SControl 300)

[ 8219.948069] ata4: softreset failed (device not ready)

[ 8219.948073] ata4: applying SB600 PMP SRST workaround and retrying

[ 8219.960068] usb 1-3: reset high speed USB device using ehci_hcd and address 2

[ 8220.112036] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 8220.120941] ata4.00: configured for UDMA/100

[ 8220.127901] PM: resume of drv:usb dev:1-3 complete after 354.051 msecs

[ 8220.172387] sd 2:0:0:0: [sda] Starting disk

[ 8221.180032] ata3: softreset failed (device not ready)

[ 8221.180036] ata3: applying SB600 PMP SRST workaround and retrying

[ 8221.344042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 8221.353820] ata3.00: configured for UDMA/100

[ 8221.384921] PM: resume of drv:sd dev:2:0:0:0 complete after 1212.535 msecs

[ 8221.389637] PM: resume of devices complete after 1952.242 msecs

[ 8221.389846] PM: resume devices took 1.952 seconds

[ 8221.389882] PM: Finishing wakeup.

[ 8221.389884] Restarting tasks ... done.

[ 8221.649371] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 8221.655105] r8169: eth0: link down

[ 8221.655560] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 8222.081764] CPU0 attaching NULL sched-domain.

[ 8222.081772] CPU1 attaching NULL sched-domain.

[ 8222.120149] CPU0 attaching sched-domain:

[ 8222.120157]  domain 0: span 0-1 level MC

[ 8222.120163]   groups: 0 1

[ 8222.120173] CPU1 attaching sched-domain:

[ 8222.120178]  domain 0: span 0-1 level MC

[ 8222.120183]   groups: 1 0

[ 8228.013322] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)

[ 8228.213036] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)

[ 8228.217144] wlan0: direct probe responded

[ 8228.217154] wlan0: authenticate with AP 00:24:17:65:5b:23 (try 1)

[ 8228.219447] wlan0: authenticated

[ 8228.219484] wlan0: associate with AP 00:24:17:65:5b:23 (try 1)

[ 8228.223803] wlan0: RX AssocResp from 00:24:17:65:5b:23 (capab=0x411 status=0 aid=1)

[ 8228.223809] wlan0: associated

[ 8228.233417] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 8239.048031] wlan0: no IPv6 routers present

[11097.008834] CPU0 attaching NULL sched-domain.

[11097.008848] CPU1 attaching NULL sched-domain.

[11097.036689] CPU0 attaching sched-domain:

[11097.036699]  domain 0: span 0-1 level MC

[11097.036706]   groups: 0 1

[11097.036720] CPU1 attaching sched-domain:

[11097.036725]  domain 0: span 0-1 level MC

[11097.036730]   groups: 1 0

[11097.636177] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)

[11099.272926] PM: Syncing filesystems ... done.

[11099.312690] PM: Preparing system for mem sleep

[11099.312696] Freezing user space processes ... (elapsed 0.00 seconds) done.

[11099.313949] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[11099.314031] PM: Entering mem sleep

[11099.314052] Suspending console(s) (use no_console_suspend to debug)

[11099.356260] sd 2:0:0:0: [sda] Synchronizing SCSI cache

[11099.356428] sd 2:0:0:0: [sda] Stopping disk

[11099.845178] PM: suspend of drv:sd dev:2:0:0:0 complete after 488.919 msecs

[11099.846176] btusb_intr_complete: hci0 urb efd57700 failed to resubmit (1)

[11099.847163] btusb_bulk_complete: hci0 urb efd57c00 failed to resubmit (1)

[11099.848167] btusb_bulk_complete: hci0 urb efd57880 failed to resubmit (1)

[11100.316206] PM: suspend of drv:psmouse dev:serio1 complete after 436.063 msecs

[11100.420066] PM: suspend of drv:atkbd dev:serio0 complete after 103.855 msecs

[11100.423467] ath9k 0000:08:00.0: PCI INT A disabled

[11100.436169] HDA Intel 0000:01:00.1: PCI INT B disabled

[11100.436233] ACPI handle has no context!

[11100.452466] [fglrx] IRQ 31 Disabled

[11100.452517] [fglrx] Preparing suspend fglrx in kernel.

[11101.341096] [fglrx] Suspending fglrx in kernel completed.

[11101.341102] [fglrx] Power down the ASIC .

[11101.341255] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 888.894 msecs

[11101.444566] HDA Intel 0000:00:14.2: PCI INT A disabled

[11101.444615] ACPI handle has no context!

[11101.460081] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 118.796 msecs

[11101.460207] ehci_hcd 0000:00:13.2: PCI INT B disabled

[11101.460220] ohci_hcd 0000:00:13.1: PCI INT A disabled

[11101.460233] ohci_hcd 0000:00:13.0: PCI INT A disabled

[11101.460244] ehci_hcd 0000:00:12.2: PCI INT B disabled

[11101.460254] ohci_hcd 0000:00:12.1: PCI INT A disabled

[11101.460265] ohci_hcd 0000:00:12.0: PCI INT A disabled

[11101.508408] ahci 0000:00:11.0: PCI INT A disabled

[11101.525243] PM: suspend of devices complete after 2210.882 msecs

[11101.525246] PM: suspend devices took 2.212 seconds

[11101.525735] r8169 0000:09:00.0: PME# enabled

[11101.572641] PM: late suspend of devices complete after 47.386 msecs

[11101.572730] ACPI: Preparing to enter system sleep state S3

[11101.632097] Disabling non-boot CPUs ...

[11101.632126] CPU0 attaching NULL sched-domain.

[11101.632130] CPU1 attaching NULL sched-domain.

[11101.696288] CPU0 attaching NULL sched-domain.

[11101.697622] Breaking affinity for irq 1

[11101.697639] Breaking affinity for irq 9

[11101.697647] Breaking affinity for irq 12

[11101.800285] CPU 1 is now offline

[11101.800287] SMP alternatives: switching to UP code

[11101.806252] Back to C!

[11101.806252] Enabling non-boot CPUs ...

[11101.806252] SMP alternatives: switching to SMP code

[11101.811925] Booting processor 1 APIC 0x1 ip 0x6000

[11101.805711] Initializing CPU#1

[11101.805711] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[11101.805711] CPU: L2 Cache: 512K (64 bytes/line)

[11101.805711] CPU: Physical Processor ID: 0

[11101.805711] CPU: Processor Core ID: 1

[11101.900141] CPU1: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01

[11101.900283] CPU0 attaching NULL sched-domain.

[11101.928260] CPU0 attaching sched-domain:

[11101.928265]  domain 0: span 0-1 level MC

[11101.928269]   groups: 0 1

[11101.928273] CPU1 attaching sched-domain:

[11101.928275]  domain 0: span 0-1 level MC

[11101.928278]   groups: 1 0

[11101.928906] CPU1 is up

[11101.929122] ACPI: Waking up from system sleep state S3

[11101.967029] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[11101.967111] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[11101.967197] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[11101.967282] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[11101.967323] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[11101.967377] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)

[11101.967419] ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)

[11101.980115] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)

[11101.980158] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)

[11101.996290] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)

[11101.996581] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403)

[11101.996777] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)

[11101.996874] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[11101.997356] PM: early resume of devices complete after 30.504 msecs

[11102.024447] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[11102.024590] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[11102.048075] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[11102.072262] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[11102.072280] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[11102.096261] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[11102.120262] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[11102.121428] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[11102.121533] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0

[11102.121544] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0

[11102.121553] fglrx_pci 0000:01:00.0: setting latency timer to 64

[11102.124369] [fglrx] Power up the ASIC

[11102.124385] [fglrx] Preparing resume fglrx in kernel.

[11102.169111] [fglrx] Resuming fglrx in kernel completed.

[11102.169279] [fglrx] IRQ 31 Enabled

[11102.169345] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[11102.169353] HDA Intel 0000:01:00.1: setting latency timer to 64

[11102.169424] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[11102.169449] r8169 0000:09:00.0: PME# disabled

[11102.344129] ata5: SATA link down (SStatus 0 SControl 300)

[11102.508069] ata4: softreset failed (device not ready)

[11102.508073] ata4: applying SB600 PMP SRST workaround and retrying

[11102.520068] usb 1-3: reset high speed USB device using ehci_hcd and address 2

[11102.672035] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[11102.680952] ata4.00: configured for UDMA/100

[11102.687910] PM: resume of drv:usb dev:1-3 complete after 353.296 msecs

[11102.732387] sd 2:0:0:0: [sda] Starting disk

[11103.740034] ata3: softreset failed (device not ready)

[11103.740038] ata3: applying SB600 PMP SRST workaround and retrying

[11103.904044] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[11103.912520] ata3.00: configured for UDMA/100

[11103.943671] PM: resume of drv:sd dev:2:0:0:0 complete after 1211.285 msecs

[11103.948407] PM: resume of devices complete after 1951.013 msecs

[11103.948617] PM: resume devices took 1.952 seconds

[11103.948656] PM: Finishing wakeup.

[11103.948658] Restarting tasks ... done.

[11104.213401] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[11104.218188] r8169: eth0: link down

[11104.218644] ADDRCONF(NETDEV_UP): eth0: link is not ready

[11104.572163] CPU0 attaching NULL sched-domain.

[11104.572178] CPU1 attaching NULL sched-domain.

[11104.592157] CPU0 attaching sched-domain:

[11104.592166]  domain 0: span 0-1 level MC

[11104.592173]   groups: 0 1

[11104.592186] CPU1 attaching sched-domain:

[11104.592191]  domain 0: span 0-1 level MC

[11104.592197]   groups: 1 0

[11110.601702] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)

[11110.801592] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)

[11110.805688] wlan0: direct probe responded

[11110.805691] wlan0: authenticate with AP 00:24:17:65:5b:23 (try 1)

[11110.807820] wlan0: authenticated

[11110.807852] wlan0: associate with AP 00:24:17:65:5b:23 (try 1)

[11110.812184] wlan0: RX AssocResp from 00:24:17:65:5b:23 (capab=0x411 status=0 aid=1)

[11110.812190] wlan0: associated

[11110.821525] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[11121.312546] wlan0: no IPv6 routers present

[11218.164084] usb 2-3: new high speed USB device using ehci_hcd and address 2

[11222.980067] usb 5-3: new full speed USB device using ohci_hcd and address 2

[11223.141095] usb 5-3: not running at top speed; connect to a high speed hub

[11223.161268] usb 5-3: configuration #1 chosen from 1 choice

[11223.176149] scsi7 : SCSI emulation for USB Mass Storage devices

[11223.181110] usb-storage: device found at 2

[11223.181114] usb-storage: waiting for device to settle before scanning

[11228.181229] usb-storage: device scan complete

[11228.189178] scsi 7:0:0:0: Direct-Access     SanDisk  Sansa Clip 2GB   v01. PQ: 0 ANSI: 0

[11228.193917] sd 7:0:0:0: Attached scsi generic sg2 type 0

[11228.211158] sd 7:0:0:0: [sdb] 3992576 512-byte logical blocks: (2.04 GB/1.90 GiB)

[11228.217152] sd 7:0:0:0: [sdb] Write Protect is off

[11228.217158] sd 7:0:0:0: [sdb] Mode Sense: 04 00 00 00

[11228.217162] sd 7:0:0:0: [sdb] Assuming drive cache: write through

[11228.241162] sd 7:0:0:0: [sdb] Assuming drive cache: write through

[11228.241179]  sdb:

[11228.274143] sd 7:0:0:0: [sdb] Assuming drive cache: write through

[11228.274152] sd 7:0:0:0: [sdb] Attached SCSI removable disk

[11334.700793] usb 5-3: USB disconnect, address 2

[11341.684049] usb 2-3: new high speed USB device using ehci_hcd and address 3

[11343.817646] usb 5-3: new full speed USB device using ohci_hcd and address 3

[11343.976491] usb 5-3: not running at top speed; connect to a high speed hub

[11343.994723] usb 5-3: configuration #1 chosen from 1 choice

[11344.016070] scsi8 : SCSI emulation for USB Mass Storage devices

[11344.016974] usb-storage: device found at 3

[11344.016980] usb-storage: waiting for device to settle before scanning

[11349.017580] usb-storage: device scan complete

[11349.023558] scsi 8:0:0:0: Direct-Access     SanDisk  Sansa Clip 2GB   v01. PQ: 0 ANSI: 0

[11349.030844] sd 8:0:0:0: Attached scsi generic sg2 type 0

[11349.042537] sd 8:0:0:0: [sdb] 3992576 512-byte logical blocks: (2.04 GB/1.90 GiB)

[11349.048516] sd 8:0:0:0: [sdb] Write Protect is off

[11349.048523] sd 8:0:0:0: [sdb] Mode Sense: 04 00 00 00

[11349.048528] sd 8:0:0:0: [sdb] Assuming drive cache: write through

[11349.072542] sd 8:0:0:0: [sdb] Assuming drive cache: write through

[11349.072554]  sdb:

[11349.102584] sd 8:0:0:0: [sdb] Assuming drive cache: write through

[11349.102598] sd 8:0:0:0: [sdb] Attached SCSI removable disk

[12175.786840] CPU0 attaching NULL sched-domain.

[12175.786855] CPU1 attaching NULL sched-domain.

[12175.814037] CPU0 attaching sched-domain:

[12175.814043]  domain 0: span 0-1 level MC

[12175.814047]   groups: 0 1

[12175.814055] CPU1 attaching sched-domain:

[12175.814057]  domain 0: span 0-1 level MC

[12175.814060]   groups: 1 0

[12176.440627] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)

[12178.056282] PM: Syncing filesystems ... done.

[12178.112048] PM: Preparing system for mem sleep

[12178.112054] Freezing user space processes ... (elapsed 0.00 seconds) done.

[12178.113367] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[12178.113461] PM: Entering mem sleep

[12178.113482] Suspending console(s) (use no_console_suspend to debug)

[12178.180212] sd 2:0:0:0: [sda] Synchronizing SCSI cache

[12178.180401] sd 2:0:0:0: [sda] Stopping disk

[12178.671739] PM: suspend of drv:sd dev:2:0:0:0 complete after 491.530 msecs

[12178.672391] btusb_intr_complete: hci0 urb ecbde580 failed to resubmit (1)

[12178.673379] btusb_bulk_complete: hci0 urb ecbdea00 failed to resubmit (1)

[12178.674377] btusb_bulk_complete: hci0 urb ecbde100 failed to resubmit (1)

[12179.137049] PM: suspend of drv:psmouse dev:serio1 complete after 432.894 msecs

[12179.240068] PM: suspend of drv:atkbd dev:serio0 complete after 103.012 msecs

[12179.244360] ath9k 0000:08:00.0: PCI INT A disabled

[12179.260174] HDA Intel 0000:01:00.1: PCI INT B disabled

[12179.260238] ACPI handle has no context!

[12179.276466] [fglrx] IRQ 31 Disabled

[12179.276517] [fglrx] Preparing suspend fglrx in kernel.

[12180.164846] [fglrx] Suspending fglrx in kernel completed.

[12180.164852] [fglrx] Power down the ASIC .

[12180.165008] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 888.647 msecs

[12180.268502] HDA Intel 0000:00:14.2: PCI INT A disabled

[12180.268551] ACPI handle has no context!

[12180.284077] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.039 msecs

[12180.284207] ehci_hcd 0000:00:13.2: PCI INT B disabled

[12180.284221] ohci_hcd 0000:00:13.1: PCI INT A disabled

[12180.284234] ohci_hcd 0000:00:13.0: PCI INT A disabled

[12180.284245] ehci_hcd 0000:00:12.2: PCI INT B disabled

[12180.284255] ohci_hcd 0000:00:12.1: PCI INT A disabled

[12180.284266] ohci_hcd 0000:00:12.0: PCI INT A disabled

[12180.332385] ahci 0000:00:11.0: PCI INT A disabled

[12180.349348] PM: suspend of devices complete after 2235.548 msecs

[12180.349352] PM: suspend devices took 2.236 seconds

[12180.349861] r8169 0000:09:00.0: PME# enabled

[12180.396641] PM: late suspend of devices complete after 47.280 msecs

[12180.396734] ACPI: Preparing to enter system sleep state S3

[12180.456098] Disabling non-boot CPUs ...

[12180.456126] CPU0 attaching NULL sched-domain.

[12180.456130] CPU1 attaching NULL sched-domain.

[12180.520289] CPU0 attaching NULL sched-domain.

[12180.521662] Breaking affinity for irq 18

[12180.521667] Breaking affinity for irq 19

[12180.624285] CPU 1 is now offline

[12180.624289] SMP alternatives: switching to UP code

[12180.630309] Back to C!

[12180.630309] Enabling non-boot CPUs ...

[12180.630309] SMP alternatives: switching to SMP code

[12180.636068] Booting processor 1 APIC 0x1 ip 0x6000

[12180.629718] Initializing CPU#1

[12180.629718] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[12180.629718] CPU: L2 Cache: 512K (64 bytes/line)

[12180.629718] CPU: Physical Processor ID: 0

[12180.629718] CPU: Processor Core ID: 1

[12180.724141] CPU1: AMD Athlon(tm) X2 Dual-Core QL-65 stepping 01

[12180.724271] CPU0 attaching NULL sched-domain.

[12180.752260] CPU0 attaching sched-domain:

[12180.752265]  domain 0: span 0-1 level MC

[12180.752269]   groups: 0 1

[12180.752273] CPU1 attaching sched-domain:

[12180.752275]  domain 0: span 0-1 level MC

[12180.752277]   groups: 1 0

[12180.753003] CPU1 is up

[12180.753218] ACPI: Waking up from system sleep state S3

[12180.791043] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[12180.791125] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[12180.791211] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[12180.791296] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[12180.791338] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[12180.791392] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007)

[12180.791434] ohci_hcd 0000:00:12.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)

[12180.804126] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)

[12180.804169] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00013)

[12180.820294] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)

[12180.820585] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403)

[12180.820779] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)

[12180.820876] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)

[12180.821380] PM: early resume of devices complete after 30.513 msecs

[12180.849032] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[12180.849181] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[12180.872091] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[12180.896263] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[12180.896281] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[12180.920263] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[12180.944263] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[12180.945490] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[12180.945599] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0

[12180.945609] fglrx_pci 0000:01:00.0: power state changed by ACPI to D0

[12180.945618] fglrx_pci 0000:01:00.0: setting latency timer to 64

[12180.948435] [fglrx] Power up the ASIC

[12180.948452] [fglrx] Preparing resume fglrx in kernel.

[12180.993523] [fglrx] Resuming fglrx in kernel completed.

[12180.993691] [fglrx] IRQ 31 Enabled

[12180.993757] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[12180.993766] HDA Intel 0000:01:00.1: setting latency timer to 64

[12180.993837] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[12180.993861] r8169 0000:09:00.0: PME# disabled

[12181.168094] ata5: SATA link down (SStatus 0 SControl 300)

[12181.332035] ata4: softreset failed (device not ready)

[12181.332038] ata4: applying SB600 PMP SRST workaround and retrying

[12181.392138] PM: resume of drv:usb dev:1-3 complete after 129.839 msecs

[12181.440393] sd 2:0:0:0: [sda] Starting disk

[12181.496043] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[12181.505039] ata4.00: configured for UDMA/100

[12182.564032] ata3: softreset failed (device not ready)

[12182.564035] ata3: applying SB600 PMP SRST workaround and retrying

[12182.728044] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[12182.733101] ata3.00: configured for UDMA/100

[12182.764264] PM: resume of drv:sd dev:2:0:0:0 complete after 1323.873 msecs

[12182.817180] PM: resume of devices complete after 1995.763 msecs

[12182.817401] PM: resume devices took 1.996 seconds

[12182.817438] PM: Finishing wakeup.

[12182.817440] Restarting tasks ... 

[12182.817601] usb 1-3: USB disconnect, address 2

[12182.843389] done.

[12182.956540] usb 1-3: new high speed USB device using ehci_hcd and address 6

[12183.121639] usb 1-3: configuration #1 chosen from 1 choice

[12183.123537] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)

[12183.152543] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13

[12183.608770] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[12183.611838] r8169: eth0: link down

[12183.612074] ADDRCONF(NETDEV_UP): eth0: link is not ready

[12184.194093] CPU0 attaching NULL sched-domain.

[12184.194102] CPU1 attaching NULL sched-domain.

[12184.216653] CPU0 attaching sched-domain:

[12184.216661]  domain 0: span 0-1 level MC

[12184.216669]   groups: 0 1

[12184.216681] CPU1 attaching sched-domain:

[12184.216686]  domain 0: span 0-1 level MC

[12184.216692]   groups: 1 0

[12189.825230] wlan0: deauthenticating from 00:24:17:65:5b:23 by local choice (reason=3)

[12190.025842] wlan0: direct probe to AP 00:24:17:65:5b:23 (try 1)

[12190.029934] wlan0: direct probe responded

[12190.029940] wlan0: authenticate with AP 00:24:17:65:5b:23 (try 1)

[12190.032539] wlan0: authenticated

[12190.032584] wlan0: associate with AP 00:24:17:65:5b:23 (try 1)

[12190.036947] wlan0: RX AssocResp from 00:24:17:65:5b:23 (capab=0x411 status=0 aid=1)

[12190.036955] wlan0: associated

[12190.046605] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[12200.904029] wlan0: no IPv6 routers present

Then sudo fdisk -l:

Disk /dev/sda: 250.1 GB, 250059350016 bytes

255 heads, 63 sectors/track, 30401 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x262180cd



   Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           1       18150   145784086    7  HPFS/NTFS

/dev/sda2           28947       30401    11681792    7  HPFS/NTFS

/dev/sda3           18150       28947    86727681    5  Extended

/dev/sda5           18150       28502    83151872   83  Linux

/dev/sda6           28502       28947     3574784   82  Linux swap / Solaris



Partition table entries are not in disk order



Disk /dev/sdb: 2044 MB, 2044198912 bytes

63 heads, 62 sectors/track, 1022 cylinders

Units = cylinders of 3906 * 512 = 1999872 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x6f20736b



This doesn't look like a partition table

Probably you selected the wrong device.



   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1   ?      199216      491461   570754815+  72  Unknown

Partition 1 has different physical/logical beginnings (non-Linux?):

     phys=(357, 116, 40) logical=(199215, 34, 11)

Partition 1 has different physical/logical endings:

     phys=(357, 32, 45) logical=(491460, 44, 51)

Partition 1 does not end on cylinder boundary.

/dev/sdb2   ?       43188      538843   968014120   65  Novell Netware 386

Partition 2 has different physical/logical beginnings (non-Linux?):

     phys=(288, 115, 43) logical=(43187, 17, 47)

Partition 2 has different physical/logical endings:

     phys=(367, 114, 50) logical=(538842, 14, 42)

Partition 2 does not end on cylinder boundary.

/dev/sdb3   ?      478721      974376   968014096   79  Unknown

Partition 3 has different physical/logical beginnings (non-Linux?):

     phys=(366, 32, 33) logical=(478720, 18, 30)

Partition 3 has different physical/logical endings:

     phys=(357, 32, 43) logical=(974375, 14, 39)

Partition 3 does not end on cylinder boundary.

/dev/sdb4   ?           1      931190  1818613248    d  Unknown

Partition 4 has different physical/logical beginnings (non-Linux?):

     phys=(372, 97, 50) logical=(0, 0, 1)

Partition 4 has different physical/logical endings:

     phys=(0, 10, 0) logical=(931189, 36, 30)

Partition 4 does not end on cylinder boundary.



Partition table entries are not in disk order

Then sudo mount:

//dev/sda5 on / type ext4 (rw,errors=remount-ro)

proc on /proc type proc (rw,noexec,nosuid,nodev)

none on /sys type sysfs (rw,noexec,nosuid,nodev)

none on /sys/fs/fuse/connections type fusectl (rw)

none on /sys/kernel/debug type debugfs (rw)

none on /sys/kernel/security type securityfs (rw)

none on /dev type devtmpfs (rw,mode=0755)

none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)

none on /dev/shm type tmpfs (rw,nosuid,nodev)

none on /var/run type tmpfs (rw,nosuid,mode=0755)

none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)

none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)

binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)

gvfs-fuse-daemon on /home/roger/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=roger)

/dev/sda1 on /media/36984CC960784648 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

/dev/sdb on /media/SANSA CLIP type vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)

Please note I've also stuck my mp3 player in since then (comes up OK, but can't see my music files).