Nokia 5130 xpressmusic internet with ubuntu 10.4

[apjayanap]

sir,
how can i use my mobile phone Nokia 5130 xpressmusic to connect to internet through ubuntu 10.4 machine via a usb cable

[JosePF]

Hello,
First make sure it can work as a modem.
After looking for USB_modeswitch, gnomeppp or wvdial to get connected as a modem.

I hope this will serve as a reference.

Regards

[bokica]

Hello,

take look on this link, it may help:
"discussions.europe.nokia.com/t5/Connectivity/5130-Connectivity-and-Ubuntu/td-p/478620"
(I can't post links directly, yet)

I made connection on Slackware by following those instruction.

[cyberjithu]

Connect your phone via datacable
open terminal & type

lsusb

now u will get the following output

owais@owais-desktop:~$ lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 0421:0445 Nokia Mobile Phones
Bus 001 Device 002: ID 046d:092f Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
owais@owais-desktop:~$

it is on my compter,ur will not be exactly the same…

Now note the line in which NOkia Mobile Phones is written…it has two number one is 0421 & other is 0445…we’ll take these numbers as 0×421 & 0×445

0421 is the Vendor ID & 0445 is the Product ID

Now enter this comand.

sudo /sbin/modprobe usbserial vendor=0x(vid) product=0x(pid)

eg, in my case::: sudo /sbin/modprobe usbserial vendor=0×421 product=0×445

Now enter this command

wvdialconf create
u’ll get a long output which will be like

Scanning your serial ports for a modem.
Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttyACM0: ATQ0 V1 E1 — OK
ttyACM0: ATQ0 V1 E1 Z — OK
ttyACM0: ATQ0 V1 E1 S0=0 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM0: Modem Identifier: ATI — Nokia
ttyACM0: Speed 4800: AT — OK
ttyACM0: Speed 9600: AT — OK
ttyACM0: Speed 19200: AT — OK
ttyACM0: Speed 38400: AT — OK
ttyACM0: Speed 57600: AT — OK
ttyACM0: Speed 115200: AT — OK
ttyACM0: Speed 230400: AT — OK
ttyACM0: Speed 460800: AT — OK
ttyACM0: Max speed is 460800; that should be safe.
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
Found an USB modem on /dev/ttyACM0.
Modem configuration written to create.
ttyACM0: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

NOw.. notice the output says that there is a modem at /dev/ttyACM0 & max speed is 460800

now enter this command

sudo gedit /etc/wvdial.conf

A file will open in text editor…now delete everything in that file & paste the following there

[Dialer Defaults]
Modem = Your Modem Name(eg, /dev/ttyACM0 in my case)
Baud = ur max speed(460800 in my case)
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = *99#
Username = username
Password = password
Stupid Mode = 1

save the file & you are done

NOw whenevr u need to connect…open terminal & type wvdial,,wait till some sort of IP adress is displayed like

pppd: �[06][06][08]` [06][08]
primary DNS address 218.248.240.135
pppd: �[06][06][08]` [06][08]
secondary DNS address 218.248.240.79
pppd: �[06][06][08]` [06][08]

Now you are connected….hit cntrl+c to dissconnect…