Make lucid detect touch screen

[Siregar]

I've try ubuntu lucid in DELL Inspiron, but touchscreen utilities is not run.
How can repair it. Thank you.

[coopstah13]

did it work in previous versions or in another distro?

I'm not that familiar with touchscreens, does it only connect with video cable or does it have something like USB too?

[Siregar]

did it work in previous versions or in another distro?

I'm not that familiar with touchscreens, does it only connect with video cable or does it have something like USB too?

the touchscreen of PC (Dell inspiron 19 product) has work using WIndows 7, but i wont to use Ubuntu lucid in my PC. After i try to install ubuntu, touch screen is not work. How can i make this right, help please..

[coopstah13]

can you post output of commands below?

lspci
lsusb
cat /var/log/Xorg.0.log

[Siregar]

FIRST COMMAND

pidel@pidel-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3401
01:00.1 Mass storage controller: VIA Technologies, Inc. Device 401a
01:00.2 SD Host controller: VIA Technologies, Inc. Device 401b
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)


SECOND COMMAND

lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0461:4d22 Primax Electronics, Ltd
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1926:007a
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b16f Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pidel@pidel-desktop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0461:4d22 Primax Electronics, Ltd
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1926:007a
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b16f Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


THIRD COMMAND

pidel@pidel-desktop:~$ cat /var/log/Xorg.0.log

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux pidel-desktop 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=784a10dd-54f7-416e-a29c-bb3c436c62fe ro quiet splash
Build Date: 16 June 2010 09:31:32AM
xorg-server 2:1.7.6-2ubuntu7.2 (For technical support please see Support | Ubuntu)
Current version of pixman: 0.16.4
Before reporting problems, check X.Org Wiki - Home
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 15 07:27:30 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
Parse error on line 39 of section ServerLayout in file /etc/X11/xorg.conf
This section must have an Identifier line.
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at X.Org Wiki - Home
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
(WW) xf86OpenConsole: VT_GETSTATE failed: Bad file descriptor
ddxSigGiveUp: Closing log

This is sir, my touchscreen is not work until now.Please help me to make this right. Thank you.

[coopstah13]

can you post contents of that /etc/X11/xorg.conf file? How did this file get created?

[Siregar]

I make this manually, because it not created before .This is the content, i take from ubuntu forum :

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "InputDevice"
Identifier "touchscreen"
Driver "evtouch"
Option "Device" "/dev/input/by-id/usb-NextWindow_Touchscreen-event-mouse"
Option "DeviceName" "touchscreen"
Option "MinX" "1"
Option "MinY" "1"
Option "MaxX" "32768"
Option "MaxY" "32768"
Option "ReportingMode" "Raw"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "50"
Option "SendCoreEvents" "On"
Option "CorePointer"
EndSection

Section "InputDevice"
Identifier "dummy"
Driver "void"
Option "Device" "/dev/input/mice"
EndSection

Section "ServerLayout"
Identifier "Main Layout"
Screen "Default Screen"
# InputDevice "Generic Keyboard"
InputDevice "touchscreen"
InputDevice "dummy"
# InputDevice "PSAUX Mouse"
# InputDevice "USB Mouse"
EndSection

[Siregar]

is any instruction for solving this problem.,
please help.,

[Siregar]

i've try another tips using eGalax. But i can't found TouchKit_1.07.0831.tar.gz .
Where i can found it? Or, is there another way to make my touchscreen run well.?
Help me please..

[Siregar]

and this problem can't i solve till now.,
help me please..,
i use Dell Inspiron One 19.,