Find the answer to your Linux question:
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
Been all over the net looking for some helpful solution to geting the wifi connection working.tried several and no go...ethernet connection is fine.. does anyone have a sure fire way ...
  1. 03-08-2011 #1
    saugen48
    saugen48 is offline
    Just Joined!
    Join Date
    Mar 2011
    Location
    Halifax, Nova Scotia, Canada Zone6
    Posts
    61

    Unhappy [SOLVED] desperate problem with wifi connection-broadcom

    Been all over the net looking for some helpful solution to geting the wifi connection working.tried several and no go...ethernet connection is fine..
    does anyone have a sure fire way to get this running...quite a noob with ubuntu and have managed to find the "additional drivers" with both the B43 and the STA and tried to activate them but didnt help...was into "synapticP manager" and did the search for the B43-fwcutter etc and that didnt help...was into the "terminal" with a command to download updated drivers etc...cant recall the command right now..but that didnt work

    when i go into the network connections... for wired I have "auto etho" and under wireless there is nothing

    HP Mini 210-1000 Ubuntu 10.10

    I have puppy linux on a pen drive and it is able to find and activate both ethernet and wireless....odd that ubuntu is having all this grief

    appreciate any and all help
  2. 03-09-2011 #2
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    Start here and post your results back into this thread please.
    http://www.linuxforums.org/forum/wir...tart-here.html
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
  3. 03-09-2011 #3
    saugen48
    saugen48 is offline
    Just Joined!
    Join Date
    Mar 2011
    Location
    Halifax, Nova Scotia, Canada Zone6
    Posts
    61

    Ubuntu wireless problem

    Code:
    [    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: ahci
    Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3660]
    Kernel driver in use: r8169
    Kernel modules: r8169
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
    Subsystem: Hewlett-Packard Company Device [103c:1507]
    Kernel modules: wl, ssb
    Last edited by MikeTbob; 03-10-2011 at 01:03 AM. Reason: added code tags
  4. 03-09-2011 #4
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,145
    Can you post the rest of the info? This was only the first command.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
  5. 03-09-2011 #5
    saugen48
    saugen48 is offline
    Just Joined!
    Join Date
    Mar 2011
    Location
    Halifax, Nova Scotia, Canada Zone6
    Posts
    61
    Code:
    Module                  Size  Used by
parport_pc             26058  0 
ppdev                   5556  0 
snd_hda_codec_idt      54887  1 
binfmt_misc             6599  1 
joydev                  8735  0 
snd_hda_intel          22107  2 
i915                  290938  4 
snd_hda_codec          87552  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep               5040  1 snd_hda_codec
snd_pcm                71475  2 snd_hda_intel,snd_hda_codec
drm_kms_helper         30200  1 i915
snd_seq_midi            4588  0 
snd_rawmidi            17783  1 snd_seq_midi
snd_seq_midi_event      6047  1 snd_seq_midi
snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event
drm                   168054  5 i915,drm_kms_helper
snd_timer              19067  2 snd_pcm,snd_seq
qcserial                3484  1 
uvcvideo               55847  0 
hp_wmi                  5191  0 
snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
usb_wwan                9953  1 qcserial
intel_agp              26360  2 i915
usbserial              33100  4 qcserial,usb_wwan
videodev               43098  1 uvcvideo
snd                    49006  13 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
v4l1_compat            13359  2 uvcvideo,videodev
i2c_algo_bit            5168  1 i915
psmouse                59033  0 
video                  18712  1 i915
lp                      7342  0 
serio_raw               4022  0 
agpgart                32011  2 drm,intel_agp
output                  1883  1 video
soundcore                880  1 snd
snd_page_alloc          7120  2 snd_hda_intel,snd_pcm
parport                31492  3 parport_pc,ppdev,lp
usbhid                 36882  0 
hid                    67742  1 usbhid
ahci                   19013  0 
libahci                21667  3 ahci
r8169                  36489  0 
mii                     4425  1 r8169
    Last edited by MikeTbob; 03-10-2011 at 01:04 AM. Reason: added code tags
  6. 03-09-2011 #6
    reed9
    reed9 is offline
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Code:
    02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1507]
Kernel modules: wl, ssb
    This is the wireless card. The opensource b43 driver does partially support this card, and the the wl (broadcom STA) driver supports this card. However, you cannot have both driver modules loading, which may be your problem.

    Do this
    Code:
    sudo modprobe -r b43
sudo modprobe -r wl
sudo modprobe wl
sudo ifconfig eth1 up
sudo iwlist eth1 scan
    Report any errors and the last command should return local wireless networks.
    The Arch Way

    How to Ask Questions the Smart Way
    Registered Linux User #482863
  7. 03-09-2011 #7
    saugen48
    saugen48 is offline
    Just Joined!
    Join Date
    Mar 2011
    Location
    Halifax, Nova Scotia, Canada Zone6
    Posts
    61
    Code:
    0.004627] ... generic registers:      2
[    0.004632] ... value mask:             000000ffffffffff
[    0.004637] ... max period:             000000007fffffff
[    0.004642] ... fixed-purpose events:   3
[    0.004646] ... event mask:             0000000700000003
[    0.012163] ACPI: Core revision 20100428
[    0.032019] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.032030] ftrace: allocating 21758 entries in 43 pages
[    0.036098] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079295] CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
[    0.080000] Booting Node   0, Processors  #1
[    0.008000] Initializing CPU#1
[    0.008000] CPU1: Thermal monitoring handled by SMI
[    0.168030] Brought up 2 CPUs
[    0.168039] Total of 2 processors activated (6650.68 BogoMIPS).
[    0.168407] devtmpfs: initialized
[    0.170398] regulator: core version 0.5
[    0.170445] Time: 12:00:33  Date: 03/09/11
[    0.170534] NET: Registered protocol family 16
[    0.172130] Trying to unpack rootfs image as initramfs...
[    0.172269] EISA bus registered
[    0.172296] ACPI: bus type pci registered
[    0.172504] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.172515] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.172522] PCI: Using MMCONFIG for extended config space
[    0.172528] PCI: Using configuration type 1 for base access
[    0.176626] bio: create slab <bio-0> at 0
[    0.182043] ACPI: EC: Look up EC in DSDT
[    0.188375] ACPI: Executed 6 blocks of module-level executable AML code
[    0.193468] ACPI: BIOS _OSI(Linux) query ignored
[    0.196948] ACPI: SSDT 3f4b7c90 001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.197731] ACPI: Dynamic OEM Table Load:
[    0.197742] ACPI: SSDT (null) 001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.198307] ACPI: SSDT 3f4b6e10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.200585] ACPI: Dynamic OEM Table Load:
[    0.200597] ACPI: SSDT (null) 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.201830] ACPI: SSDT 3f4b7f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.203276] ACPI: Dynamic OEM Table Load:
[    0.203288] ACPI: SSDT (null) 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.203766] ACPI: SSDT 3f4b5f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.205199] ACPI: Dynamic OEM Table Load:
[    0.205211] ACPI: SSDT (null) 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.208584] ACPI: Interpreter enabled
[    0.208584] ACPI: (supports S0 S3 S4 S5)
[    0.208584] ACPI: Using IOAPIC for interrupt routing
[    0.228786] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.229437] ACPI: No dock devices found.
[    0.229450] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.231235] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[    0.231268] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.231274] _OSC request data:1 8 1f 
[    0.231288] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.234274] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.234285] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.234295] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.234307] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[    0.234417] pci 0000:00:02.0: reg 10: [mem 0x58180000-0x581fffff]
[    0.234429] pci 0000:00:02.0: reg 14: [io  0x60c0-0x60c7]
[    0.234441] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
[    0.234452] pci 0000:00:02.0: reg 1c: [mem 0x58000000-0x580fffff]
[    0.234514] pci 0000:00:02.1: reg 10: [mem 0x58100000-0x5817ffff]
[    0.234672] pci 0000:00:1b.0: reg 10: [mem 0x58200000-0x58203fff 64bit]
[    0.234761] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.234774] pci 0000:00:1b.0: PME# disabled
[    0.234921] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.234933] pci 0000:00:1c.0: PME# disabled
[    0.235086] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.235097] pci 0000:00:1c.1: PME# disabled
[    0.235201] pci 0000:00:1d.0: reg 20: [io  0x6080-0x609f]
[    0.235300] pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
[    0.235398] pci 0000:00:1d.2: reg 20: [io  0x6040-0x605f]
[    0.235495] pci 0000:00:1d.3: reg 20: [io  0x6020-0x603f]
[    0.235591] pci 0000:00:1d.7: reg 10: [mem 0x58204400-0x582047ff]
[    0.235684] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.235695] pci 0000:00:1d.7: PME# disabled
[    0.236019] pci 0000:00:1f.2: reg 10: [io  0x60b8-0x60bf]
[    0.236035] pci 0000:00:1f.2: reg 14: [io  0x60cc-0x60cf]
[    0.236051] pci 0000:00:1f.2: reg 18: [io  0x60b0-0x60b7]
[    0.236066] pci 0000:00:1f.2: reg 1c: [io  0x60c8-0x60cb]
[    0.236080] pci 0000:00:1f.2: reg 20: [io  0x60a0-0x60af]
[    0.236096] pci 0000:00:1f.2: reg 24: [mem 0x58204000-0x582043ff]
[    0.236152] pci 0000:00:1f.2: PME# supported from D3hot
[    0.236163] pci 0000:00:1f.2: PME# disabled
[    0.236253] pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
[    0.236429] pci 0000:01:00.0: reg 10: [io  0x5000-0x50ff]
[    0.236463] pci 0000:01:00.0: reg 18: [mem 0x50010000-0x50010fff 64bit pref]
[    0.236489] pci 0000:01:00.0: reg 20: [mem 0x50000000-0x5000ffff 64bit pref]
[    0.236506] pci 0000:01:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.236568] pci 0000:01:00.0: supports D1 D2
[    0.236575] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236587] pci 0000:01:00.0: PME# disabled
[    0.244064] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.244080] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.244092] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.244109] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.244376] pci 0000:02:00.0: reg 10: [mem 0x56000000-0x56003fff 64bit]
[    0.244624] pci 0000:02:00.0: supports D1 D2
[    0.244817] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.244829] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.244840] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.244856] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.244977] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.244990] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.245002] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.245019] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.245028] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.245037] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.245046] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.245055] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.245091] pci_bus 0000:00: on NUMA node 0
[    0.245117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.245691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.246193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.246491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.247158] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[    0.247188] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.247194] _OSC request data:1 1f 1f 
[    0.258306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.258675] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.259040] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.259390] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.259765] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.260145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.260516] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.260878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.261063] HEST: Table is not found!
[    0.261325] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.261354] vgaarb: loaded
[    0.261892] SCSI subsystem initialized
[    0.262118] libata version 3.00 loaded.
[    0.262339] usbcore: registered new interface driver usbfs
[    0.262393] usbcore: registered new interface driver hub
[    0.262491] usbcore: registered new device driver usb
[    0.263348] ACPI: WMI: Mapper loaded
[    0.263354] PCI: Using ACPI for IRQ routing
[    0.263363] PCI: pci_cache_line_size set to 64 bytes
[    0.263578] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    0.263586] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.263594] reserve RAM buffer: 000000003f494000 - 000000003fffffff 
[    0.263898] NetLabel: Initializing
[    0.263905] NetLabel:  domain hash size = 128
[    0.263910] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.263945] NetLabel:  unlabeled traffic allowed by default
[    0.264087] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.264101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.264116] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.272085] Switching to clocksource tsc
[    0.299960] AppArmor: AppArmor Filesystem Enabled
[    0.299995] pnp: PnP ACPI init
[    0.300038] ACPI: bus type pnp registered
[    0.305232] pnp: PnP ACPI: found 9 devices
[    0.305239] ACPI: ACPI bus type pnp unregistered
[    0.305251] PnPBIOS: Disabled by ACPI PNP
[    0.305281] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.305293] system 00:01: [io  0x0380-0x0387] has been reserved
[    0.305302] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.305311] system 00:01: [io  0x0610] has been reserved
[    0.305320] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.305329] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.305338] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.305347] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.305359] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.305369] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.305379] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.305389] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.305399] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.305409] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.305419] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.345703] pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.345770] pci 0000:01:00.0: BAR 6: assigned [mem 0x50020000-0x5002ffff pref]
[    0.345780] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.345790] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.345804] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.345816] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.345831] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.345841] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.345853] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.345865] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.345882] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.345888] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.345899] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.345910] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.345948]   alloc irq_desc for 16 on node -1
[    0.345954]   alloc kstat_irqs on node -1
[    0.345972] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.345984] pci 0000:00:1c.0: setting latency timer to 64
[    0.346011]   alloc irq_desc for 17 on node -1
[    0.346017]   alloc kstat_irqs on node -1
[    0.346030] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.346043] pci 0000:00:1c.1: setting latency timer to 64
[    0.346061] pci 0000:00:1e.0: setting latency timer to 64
[    0.346074] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.346083] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.346092] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.346100] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.346109] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.346117] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
[    0.346126] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.346135] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.346144] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
[    0.346153] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.346163] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.346171] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.346180] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.346189] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.346292] NET: Registered protocol family 2
[    0.346498] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.347346] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.348452] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.348998] TCP: Hash tables configured (established 131072 bind 65536)
[    0.349009] TCP reno registered
[    0.349024] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.349047] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.349329] NET: Registered protocol family 1
[    0.349376] pci 0000:00:02.0: Boot video device
[    0.363993] PCI: CLS 64 bytes, default 64
[    0.364065] Simple Boot Flag at 0x44 set to 0x1
[    0.364616] cpufreq-nforce2: No nForce2 chipset.
[    0.364724] Scanning for low memory corruption every 60 seconds
[    0.365173] audit: initializing netlink socket (disabled)
[    0.365199] type=2000 audit(1299672033.360:1): initialized
[    0.388118] highmem bounce pool size: 64 pages
[    0.388135] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.393363] VFS: Disk quotas dquot_6.5.2
[    0.393572] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.395649] fuse init (API version 7.14)
[    0.395994] msgmni has been set to 1709
[    0.423359] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.423369] io scheduler noop registered
[    0.423375] io scheduler deadline registered
[    0.423429] io scheduler cfq registered (default)
[    0.423755] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.423827]   alloc irq_desc for 40 on node -1
[    0.423834]   alloc kstat_irqs on node -1
[    0.423871] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.424120] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.424188]   alloc irq_desc for 41 on node -1
[    0.424194]   alloc kstat_irqs on node -1
[    0.424214] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.424535] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.424879] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[    0.424910] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.424916] _OSC request data:1 0 1f 
[    0.425278] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[    0.425308] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.425314] _OSC request data:1 0 1f 
[    0.425719] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[    0.425750] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.425756] _OSC request data:1 0 1f 
[    0.426098] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[    0.426128] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.426134] _OSC request data:1 0 1f 
[    0.426208] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.426533] intel_idle: MWAIT substates: 0x20220
[    0.426539] intel_idle: v0.4 model 0x1C
[    0.426545] intel_idle: lapic_timer_reliable_states 0x6
[    0.426566] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.426904] Switching to clocksource hpet
[    0.427538] ACPI: AC Adapter [ACAD] (on-line)
[    0.427817] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.427854] ACPI: Power Button [PWRB]
[    0.428002] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.428469] ACPI: Lid Switch [LID0]
[    0.428677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.428691] ACPI: Power Button [PWRF]
[    0.429475] ACPI: acpi_idle yielding to intel_idle
[    0.438131] thermal LNXTHERM:01: registered as thermal_zone0
[    0.438158] ACPI: Thermal Zone [TZ0] (26 C)
[    0.438479] ERST: Table is not found!
[    0.439210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.443995] brd: module loaded
[    0.445954] loop: module loaded
[    0.447898] Fixed MDIO Bus: probed
[    0.448034] PPP generic driver version 2.4.2
[    0.448173] tun: Universal TUN/TAP device driver, 1.6
[    0.448180] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.448632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.448691] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.448732] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.448742] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.448861] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.448912] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.448934] ehci_hcd 0000:00:1d.7: debug port 1
[    0.452841] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.452894] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58204400
[    0.456895] isapnp: Scanning for PnP cards...
[    0.466654] ACPI: Battery Slot [BAT0] (battery present)
[    0.500430] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.500823] hub 1-0:1.0: USB hub found
[    0.500838] hub 1-0:1.0: 8 ports detected
[    0.501041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.501088] uhci_hcd: USB Universal Host Controller Interface driver
[    0.501166] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.501185] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.501194] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.501306] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.501355] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[    0.501706] hub 2-0:1.0: USB hub found
[    0.501720] hub 2-0:1.0: 2 ports detected
[    0.501865] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.501881] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.501890] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.502000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.502067] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[    0.502410] hub 3-0:1.0: USB hub found
[    0.502423] hub 3-0:1.0: 2 ports detected
[    0.502560]   alloc irq_desc for 18 on node -1
[    0.502567]   alloc kstat_irqs on node -1
[    0.502582] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.502598] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.502607] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.502713] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.502779] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[    0.503124] hub 4-0:1.0: USB hub found
[    0.503137] hub 4-0:1.0: 2 ports detected
[    0.503279]   alloc irq_desc for 19 on node -1
[    0.503285]   alloc kstat_irqs on node -1
[    0.503298] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.503314] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.503322] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.503428] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.503490] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[    0.503847] hub 5-0:1.0: USB hub found
[    0.503860] hub 5-0:1.0: 2 ports detected
[    0.504196] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.522902] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.522927] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.523172] mice: PS/2 mouse device common for all mice
[    0.523560] rtc_cmos 00:03: RTC can wake from S4
[    0.523672] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.523717] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.524100] device-mapper: uevent: version 1.0.3
[    0.552845] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.644094] device-mapper: multipath: version 1.1.1 loaded
[    0.644105] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.652916] EISA: Probing bus 0 at eisa.0
[    0.652926] EISA: Cannot allocate resource for mainboard
[    0.652934] Cannot allocate resource for EISA slot 1
[    0.652942] Cannot allocate resource for EISA slot 2
[    0.652950] Cannot allocate resource for EISA slot 3
[    0.652957] Cannot allocate resource for EISA slot 4
[    0.652965] Cannot allocate resource for EISA slot 5
[    0.652972] Cannot allocate resource for EISA slot 6
[    0.652980] Cannot allocate resource for EISA slot 7
[    0.652987] Cannot allocate resource for EISA slot 8
[    0.652993] EISA: Detected 0 cards.
[    0.668794] cpuidle: using governor ladder
[    0.669179] cpuidle: using governor menu
[    0.670031] TCP cubic registered
[    0.670460] NET: Registered protocol family 10
[    0.671499] lo: Disabled Privacy Extensions
[    0.672168] NET: Registered protocol family 17
[    0.673503] Using IPI No-Shortcut mode
[    0.673775] PM: Resume from disk failed.
[    0.673802] registered taskstats version 1
[    0.674384]   Magic number: 3:888:25
[    0.674512] rtc_cmos 00:03: setting system clock to 2011-03-09 12:00:34 UTC (1299672034)
[    0.674521] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.674526] EDD information not available.
[    0.685865] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.811549] isapnp: No Plug & Play device found
[    0.841279] Freeing initrd memory: 10508k freed
[    0.849309] Freeing unused kernel memory: 684k freed
[    0.849986] Write protecting the kernel text: 4932k
[    0.850058] Write protecting the kernel read-only data: 1976k
[    0.868569] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    0.888419] udev[77]: starting version 163
[    1.116180] usb 1-8: new high speed USB device using ehci_hcd and address 4
[    1.216917] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.216972] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.217045] r8169 0000:01:00.0: setting latency timer to 64
[    1.217122]   alloc irq_desc for 42 on node -1
[    1.217129]   alloc kstat_irqs on node -1
[    1.217159] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
[    1.218711] r8169 0000:01:00.0: eth0: RTL8102e at 0xf8060000, c8:0a:a9:09:80:55, XID 04e00000 IRQ 42
[    1.250787] usb 1-8: config 1 has an invalid interface number: 1 but max is 0
[    1.250799] usb 1-8: config 1 has no interface number 0
[    1.268628] ahci 0000:00:1f.2: version 3.0
[    1.268668] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.268748]   alloc irq_desc for 43 on node -1
[    1.268755]   alloc kstat_irqs on node -1
[    1.268780] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.268868] ahci: SSS flag set, parallel bus scan disabled
[    1.268927] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.268939] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.268953] ahci 0000:00:1f.2: setting latency timer to 64
[    1.269629] scsi0 : ahci
[    1.270014] scsi1 : ahci
[    1.270284] scsi2 : ahci
[    1.270576] scsi3 : ahci
[    1.271395] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 43
[    1.271408] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 43
[    1.271416] ata3: DUMMY
[    1.271422] ata4: DUMMY
[    1.492141] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    1.752142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.755792] ata1.00: unexpected _GTF length (4)
[    1.795739] ata1.00: ATA-8: WDC WD3200BPVT-00HXZT1, 01.01A01, max UDMA/133
[    1.795752] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.798623] ata1.00: unexpected _GTF length (4)
[    1.799037] ata1.00: configured for UDMA/133
[    1.812414] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5
[    1.812927] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.813231] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.813402] sd 0:0:0:0: [sda] Write Protect is off
[    1.813410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.813476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.813866]  sda: sda1 sda2 < sda5 >
[    1.852516] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.132147] ata2: SATA link down (SStatus 0 SControl 300)
[    2.167045] usbcore: registered new interface driver hiddev
[    2.180559] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[    2.180930] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2/input0
[    2.180996] usbcore: registered new interface driver usbhid
[    2.181004] usbhid: USB HID core driver
[    2.548451] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.200919] udev[332]: starting version 163
[   13.275392] Adding 3069948k swap on /dev/sda5.  Priority:-1 extents:1 across:3069948k 
[   13.691748] lp: driver loaded but no devices found
[   13.892536] Linux agpgart interface v0.103
[   14.055880] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[   14.064533] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.084888] usbcore: registered new interface driver usbserial
[   14.085037] USB Serial support registered for generic
[   14.085324] usbcore: registered new interface driver usbserial_generic
[   14.085332] usbserial: USB Serial Driver core
[   14.097084] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[   14.167780] Linux video capture interface: v2.00
[   14.230524] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[   14.231122] input: HP WMI hotkeys as /devices/virtual/input/input5
[   14.255460] uvcvideo: Found UVC 1.00 device HP Webcam-50 (090c:637b)
[   14.261491] USB Serial support registered for Qualcomm USB modem
[   14.262220] qcserial 1-8:1.1: Qualcomm USB modem converter detected
[   14.262716] usb 1-8: Qualcomm USB modem converter now attached to ttyUSB0
[   14.263518] usbcore: registered new interface driver qcserial
[   14.276128] type=1400 audit(1299672048.097:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=584 comm="apparmor_parser"
[   14.276924] type=1400 audit(1299672048.097:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser"
[   14.277554] type=1400 audit(1299672048.097:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser"
[   14.558164] [drm] Initialized drm 1.1.0 20060810
[   14.910386] i915 0000:00:02.0: power state changed by ACPI to D0
[   14.910424] i915 0000:00:02.0: power state changed by ACPI to D0
[   14.910442] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.910453] i915 0000:00:02.0: setting latency timer to 64
[   15.019747] input: HP Webcam-50 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6
[   15.019959] usbcore: registered new interface driver uvcvideo
[   15.019967] USB Video Class driver (v0.1.0)
[   15.071456] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400
[   15.074808]   alloc irq_desc for 44 on node -1
[   15.074818]   alloc kstat_irqs on node -1
[   15.074838] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   15.074862] [drm] set up 7M of stolen space
[   15.140037] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   15.146406] type=1400 audit(1299672048.965:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=771 comm="apparmor_parser"
[   15.147217] type=1400 audit(1299672048.965:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=771 comm="apparmor_parser"
[   15.147692] type=1400 audit(1299672048.965:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=771 comm="apparmor_parser"
[   15.162139] type=1400 audit(1299672048.981:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=772 comm="apparmor_parser"
[   15.172739] type=1400 audit(1299672048.993:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=772 comm="apparmor_parser"
[   15.175893] type=1400 audit(1299672048.993:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=774 comm="apparmor_parser"
[   15.177608] type=1400 audit(1299672048.997:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=774 comm="apparmor_parser"
[   15.246061] r8169 0000:01:00.0: eth0: link up
[   15.246073] r8169 0000:01:00.0: eth0: link up
[   15.294311] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   15.294802] [drm] initialized overlay support
[   15.620081] Skipping EDID probe due to cached edid
[   16.015041] Console: switching to colour frame buffer device 128x37
[   16.021983] fb0: inteldrmfb frame buffer device
[   16.021987] drm: registered panic notifier
[   16.022009] Slow work thread pool: Starting up
[   16.022146] Slow work thread pool: Ready
[   16.034021] acpi device:23: registered as cooling_device2
[   16.036741] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   16.037185] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   16.037529] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.037630] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.037732]   alloc irq_desc for 45 on node -1
[   16.037740]   alloc kstat_irqs on node -1
[   16.037766] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   16.037836] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.136450] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.136752] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.152118] Skipping EDID probe due to cached edid
[   16.451529] ppdev: user-space parallel port driver
[   16.913688] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   16.984751] Skipping EDID probe due to cached edid
[   17.016280] Skipping EDID probe due to cached edid
[   18.524616] Skipping EDID probe due to cached edid
[   18.560635] Skipping EDID probe due to cached edid
[   18.596623] Skipping EDID probe due to cached edid
[   18.632147] Skipping EDID probe due to cached edid
[   20.395132] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   25.624116] Skipping EDID probe due to cached edid
[   26.080050] eth0: no IPv6 routers present
[ 1042.796139] Skipping EDID probe due to cached edid
    Last edited by MikeTbob; 03-10-2011 at 01:05 AM. Reason: added code tags
  8. 03-09-2011 #8
    reed9
    reed9 is offline
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Ah, posted while I was writing.

    So neither driver module is loaded.

    Just do
    Code:
    sudo modprobe wl
    I am assuming you did successfully install the wl driver. If you get a module not found type error, it isn't installed and we'll deal with that.
    The Arch Way

    How to Ask Questions the Smart Way
    Registered Linux User #482863
  9. 03-09-2011 #9
    saugen48
    saugen48 is offline
    Just Joined!
    Join Date
    Mar 2011
    Location
    Halifax, Nova Scotia, Canada Zone6
    Posts
    61
    Code:
    eth1      Scan completed :
          Cell 01 - Address: 00:25:9C:2E:98:EE
                    ESSID:"linksys"
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality:5/5  Signal level:-31 dBm  Noise level:-92 dBm
                    IE: Unknown: DD6F0050F204104A00011010440001011041000100103B000103104700106E3FD7F057A1D61C6B1E661545E50D56102100074C696E6B737973102300075752543136304E102400063132333435361042000234321054000800060050F2040001101100075752543136304E100800020084
                    Encryption key:off
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
                              12 Mb/s; 48 Mb/s
    Last edited by MikeTbob; 03-10-2011 at 01:05 AM. Reason: added code tags
  10. 03-09-2011 #10
    saugen48
    saugen48 is offline
    Just Joined!
    Join Date
    Mar 2011
    Location
    Halifax, Nova Scotia, Canada Zone6
    Posts
    61
    Quote Originally Posted by reed9 View Post
    Ah, posted while I was writing.

    So neither driver module is loaded.

    Just do
    Code:
    sudo modprobe wl
    I am assuming you did successfully install the wl driver. If you get a module not found type error, it isn't installed and we'll deal with that.

    That command got me nothing
Page 1 of 3 1 2 3 LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

...