Find the answer to your Linux question:
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
Hi, I just installed Linux with Kubuntu a couple hours ago so I am a complete noob in Linux. So here is my problem: -I have a NETGEAR Wireless-N 300 ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jun 2011
    Posts
    9

    Help with Wireless USB Adapter!


    Hi, I just installed Linux with Kubuntu a couple hours ago so I am a complete noob in Linux. So here is my problem:
    -I have a NETGEAR Wireless-N 300 USB Adapter that I use in Windows to connect to my internet
    -You need to have a .exe program to configure this adapter with the system and there is a program called NETGEAR Smart Wizard which helps you configure to connect to your internet.
    -In Linux I can't install it from the CD because it is an .exe file

    So I was wondering if this would work?
    -Install WINE on Linux
    But then again I have problems because I can't connect to the internet through Linux and search up the WINE setup file. I did however go on windows, download a tar.gz file of WINE onto my usb and extracted the file in Linux. I went through the steps on how to install it but then something pops up where it checks some stuff and finally says
    "no c compiler found in $PATH" and before that it said no to "c-compiler" etc.
    Please help me :P Suggest any different ways how to do this or how to fix the c compiler thing. Thank You so much. I dont want to go back to windows. -.-

  2. #2
    rrl
    rrl is offline
    Just Joined!
    Join Date
    May 2011
    Location
    NJ
    Posts
    56
    Plug in the adapter, then go to System>Administration>Additional Drivers.

    You might find some available drivers in that list.
    If so select one, and activate it. If not post back.

  3. #3
    rrl
    rrl is offline
    Just Joined!
    Join Date
    May 2011
    Location
    NJ
    Posts
    56
    You can install wine through the software center, but you don't use Wine for linux driver purposes. NDIS is what you want. You are configuring NDIS driver via Additional Drivers.

  4. #4
    Just Joined!
    Join Date
    Sep 2007
    Location
    50 Miles NW of Maxwell Street
    Posts
    4
    These might help. Unfortunately, I am not yet allowed to post links, so you will have to be able to understand my code for the URLs. The items inside the quotes represent either a "." or a "/" depending on the word typed within the quotes.

    ubuntuforums "dot" org "slash" showthread "dot" php?t=885520

    ubuntuforums "dot" org "slash" showthread "dot" php?t=1695036

  5. #5
    rrl
    rrl is offline
    Just Joined!
    Join Date
    May 2011
    Location
    NJ
    Posts
    56
    The path I gave you to reach Additional Drivers is through the Gnome, I'm not sure where it is in KDE, I apologize, but this should help you find it.

  6. #6
    Just Joined!
    Join Date
    Jun 2011
    Posts
    9
    See now I tried the links that were posted here. The thing that really is a problem is I have no internet connection as the only way I could connect to the internet is through the USB Adapter. I cannot download through Linux but what I can do is going on my Windows OS and put all the files I need on my USB. If this helps I have Kubuntu 10.04.2. I found ndiswrapper.ko in one of the directories in kubuntu through my root. Does that mean its already on there? If so how do I use it? If not I do have ndiswrapper.1.5.6.tar.gz file on my USB but I have no idea how to extract it and install it on my Linux. Secondly I do not know how to use it. My Linux does however recognize the NETGEAR USB connected and the light is on, on the actual usb. Give me any suggestions please?

  7. #7
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Start here and follow along... it has lots of good info on getting these things to work. Post your results back into this thread.
    http://www.linuxforums.org/forum/wir...tart-here.html
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  8. #8
    Just Joined!
    Join Date
    Jun 2011
    Posts
    9
    Alright. So I finally installed ndiswrapper and it works. Not the USB though just ndiswrapper. Now I can't seem to find out the right driver for the "NETGEAR Wireless-N 300 USB adapter WNA3100".If any of you can tell me the name or tell me where to find it that would be great. I also included the text file to all my commands I did with the recent post where you told me to follow those steps. Here you are!


    Code:
    paul@Pauls-Linux:~$ lsusb
    Bus 002 Device 005: ID 0781:5406 SanDisk Corp. Cruzer Micro 1/2/4GB Flash Drive
    Bus 002 Device 003: ID 18e3:9106 Fitipower Integrated Technology Inc 
    Bus 002 Device 002: ID 8087:0020  
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 005: ID 0846:9020 NetGear, Inc. 
    Bus 001 Device 004: ID 0461:4d81 Primax Electronics, Ltd 
    Bus 001 Device 003: ID 413c:2107 Dell Computer Corp. 
    Bus 001 Device 002: ID 8087:0020  
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Code:
    paul@Pauls-Linux:~$ lsmod
    Module                  Size  Used by
    ndiswrapper           184677  0 
    nls_iso8859_1           3249  1 
    nls_cp437               4919  1 
    vfat                    8933  1 
    fat                    47767  1 vfat
    ppdev                   5259  0 
    snd_hda_codec_intelhdmi    11622  1 
    snd_hda_codec_realtek   203408  1 
    fbcon                  35102  71 
    tileblit                2031  1 fbcon
    font                    7557  1 fbcon
    bitblit                 4707  1 fbcon
    softcursor              1189  1 bitblit
    vga16fb                11385  0 
    vgastate                8961  1 vga16fb
    snd_hda_intel          22005  2 
    snd_hda_codec          74201  3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep               5412  1 snd_hda_codec
    snd_pcm_oss            35308  0 
    snd_mixer_oss          13746  1 snd_pcm_oss
    snd_pcm                70694  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_seq_dummy           1338  0 
    snd_seq_oss            26722  0 
    snd_seq_midi            4557  0 
    snd_rawmidi            19056  1 snd_seq_midi
    snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
    snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer              19098  2 snd_pcm,snd_seq
    usb_storage            39553  1 
    snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    i915                  287458  2 
    drm_kms_helper         29329  1 i915
    snd                    54180  17 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    drm                   162409  3 i915,drm_kms_helper
    psmouse                63245  0 
    serio_raw               3978  0 
    soundcore               6620  1 snd
    snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
    dell_wmi                1793  0 
    dcdbas                  5422  0 
    intel_agp              24375  2 i915
    agpgart                31724  2 drm,intel_agp
    i2c_algo_bit            5028  1 i915
    video                  17375  1 i915
    output                  1871  1 video
    lp                      7028  0 
    parport                32635  2 ppdev,lp
    usbhid                 36110  0 
    hid                    67064  1 usbhid
    tg3                   109324  0
    Code:
    paul@Pauls-Linux:~$ dmesg
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bb780000 (usable)
    [    0.000000]  BIOS-e820: 00000000bb780000 - 00000000bb78e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bb78e000 - 00000000bb7d0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bb7d0000 - 00000000bb7e0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000bb7ed000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 000000017c000000 (usable)
    [    0.000000]  BIOS-e820: 000000017c000000 - 0000000180000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000180000000 - 00000001bc000000 (usable)
    [    0.000000] DMI present.
    [    0.000000] last_pfn = 0xbb780 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-E7FFF write-through
    [    0.000000]   E8000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
    [    0.000000]   4 base 17C000000 mask FFC000000 uncachable
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] e820 update range: 000000017c000000 - 0000000180000000 (usable) ==> (reserved)
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
    [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 00000000bb780000 (usable)
    [    0.000000]  modified: 00000000bb780000 - 00000000bb78e000 (ACPI data)
    [    0.000000]  modified: 00000000bb78e000 - 00000000bb7d0000 (ACPI NVS)
    [    0.000000]  modified: 00000000bb7d0000 - 00000000bb7e0000 (reserved)
    [    0.000000]  modified: 00000000bb7ed000 - 00000000c0000000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  modified: 0000000100000000 - 000000017c000000 (usable)
    [    0.000000]  modified: 000000017c000000 - 0000000180000000 (reserved)
    [    0.000000]  modified: 0000000180000000 - 00000001bc000000 (usable)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 0037400000 page 2M
    [    0.000000]  0037400000 - 00377fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
    [    0.000000] RAMDISK: 37858000 - 37fef6da
    [    0.000000] Allocated new RAMDISK: 008e5000 - 0107c6da
    [    0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef6d9 to 008e5000 - 0107c6d9
    [    0.000000] ACPI: RSDP 000f9b40 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bb780100 00074 (v01 DELL    FX09    20101113 MSFT 00000097)
    [    0.000000] ACPI: FACP bb780290 000F4 (v04 DELL   FX09     20101113 MSFT 00000097)
    [    0.000000] ACPI: DSDT bb780660 05B02 (v02  1AAAA 1AAAA000 00000000 INTL 20051117)
    [    0.000000] ACPI: FACS bb78e000 00040
    [    0.000000] ACPI: APIC bb780390 0008C (v02 DELL   FX09     20101113 MSFT 00000097)
    [    0.000000] ACPI: MCFG bb780420 0003C (v01 DELL   OEMMCFG  20101113 MSFT 00000097)
    [    0.000000] ACPI: SLIC bb780460 00176 (v01 DELL    FX09    20101113 MSFT 00000097)
    [    0.000000] ACPI: OSFR bb7805e0 00080 (v01 DELL   FX09     20101113 MSFT 00000097)
    [    0.000000] ACPI: OEMB bb78e040 00072 (v01 DELL   FX09     20101113 MSFT 00000097)
    [    0.000000] ACPI: HPET bb78a660 00038 (v01 DELL   OEMHPET  20101113 MSFT 00000097)
    [    0.000000] ACPI: ASF! bb78a6a0 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
    [    0.000000] ACPI: GSCI bb78e0c0 02024 (v01 DELL   GMCHSCI  20101113 MSFT 00000097)
    [    0.000000] ACPI: SSDT bb791b40 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 2111MB HIGHMEM available.
    [    0.000000] 887MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 377fe000
    [    0.000000]   low ram: 0 - 377fe000
    [    0.000000]   node 0 low ram: 00000000 - 377fe000
    [    0.000000]   node 0 bootmap 00008000 - 0000ef00
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008e0ed8]    TEXT DATA BSS ==> [0000100000 - 00008e0ed8]
    [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
    [    0.000000]   #5 [00008e1000 - 00008e410b]              BRK ==> [00008e1000 - 00008e410b]
    [    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #7 [00008e5000 - 000107c6da]      NEW RAMDISK ==> [00008e5000 - 000107c6da]
    [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000377fe
    [    0.000000]   HighMem  0x000377fe -> 0x000bb780
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000bb780
    [    0.000000] On node 0 totalpages: 767771
    [    0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c107e000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1744 pages used for memmap
    [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 4224 pages used for memmap
    [    0.000000]   HighMem zone: 536322 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    [    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36056 r0 d21288 u524288
    [    0.000000] pcpu-alloc: s36056 r0 d21288 u524288 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 761771
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=21d795db-5781-48f3-be91-db0ebb158d43 ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 15357440 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000377fe:000bb780)
    [    0.000000] Memory: 3013488k/3071488k available (4685k kernel code, 56200k reserved, 2125k data, 660k init, 2162184k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
    [    0.000000]       .init : 0xc07a7000 - 0xc084c000   ( 660 kB)
    [    0.000000]       .data : 0xc05936e7 - 0xc07a6e88   (2125 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc05936e7   (4685 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:472
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000]   alloc irq_desc for 24 on node -1
    [    0.000000]   alloc kstat_irqs on node -1
    [    0.000000]   alloc irq_desc for 25 on node -1
    [    0.000000]   alloc kstat_irqs on node -1
    [    0.000000]   alloc irq_desc for 26 on node -1
    [    0.000000]   alloc kstat_irqs on node -1
    [    0.000000]   alloc irq_desc for 27 on node -1
    [    0.000000]   alloc kstat_irqs on node -1
    [    0.000000]   alloc irq_desc for 28 on node -1
    [    0.000000]   alloc kstat_irqs on node -1
    [    0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [    0.000000] Fast TSC calibration using PIT
    [    0.004000] Detected 3192.443 MHz processor.
    [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.88 BogoMIPS (lpj=12769772)
    [    0.000014] Security Framework initialized
    [    0.000027] AppArmor: AppArmor initialized
    [    0.000032] Mount-cache hash table entries: 512
    [    0.000119] Initializing cgroup subsys ns
    [    0.000122] Initializing cgroup subsys cpuacct
    [    0.000125] Initializing cgroup subsys memory
    [    0.000129] Initializing cgroup subsys devices
    [    0.000131] Initializing cgroup subsys freezer
    [    0.000133] Initializing cgroup subsys net_cls
    [    0.000146] CPU: Physical Processor ID: 0
    [    0.000147] CPU: Processor Core ID: 0
    [    0.000151] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.000152] CPU: L2 cache: 256K
    [    0.000153] CPU: L3 cache: 4096K
    [    0.000157] mce: CPU supports 9 MCE banks
    [    0.000166] CPU0: Thermal monitoring enabled (TM1)
    [    0.000170] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
    [    0.000176] using mwait in idle threads.
    [    0.000180] Performance Events: Westmere events, Intel PMU driver.
    [    0.000186] ... version:                3
    [    0.000187] ... bit width:              48
    [    0.000188] ... generic registers:      4
    [    0.000189] ... value mask:             0000ffffffffffff
    [    0.000190] ... max period:             000000007fffffff
    [    0.000191] ... fixed-purpose events:   3
    [    0.000192] ... event mask:             000000070000000f
    [    0.000195] Checking 'hlt' instruction... OK.
    [    0.015366] ACPI: Core revision 20090903
    [    0.045225] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.045228] ftrace: allocating 21796 entries in 43 pages
    [    0.050755] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.051072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.090661] CPU0: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz stepping 05
    [    0.196816] Booting processor 1 APIC 0x4 ip 0x6000
    [    0.209170] Initializing CPU#1
    [    0.288491] CPU: Physical Processor ID: 0
    [    0.288492] CPU: Processor Core ID: 2
    [    0.288494] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.288496] CPU: L2 cache: 256K
    [    0.288497] CPU: L3 cache: 4096K
    [    0.288508] CPU1: Thermal monitoring enabled (TM1)
    [    0.288511] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6
    [    0.288608] CPU1: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz stepping 05
    [    0.288615] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.308656] Booting processor 2 APIC 0x1 ip 0x6000
    [    0.320689] Initializing CPU#2
    [    0.400207] CPU: Physical Processor ID: 0
    [    0.400208] CPU: Processor Core ID: 0
    [    0.400211] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.400212] CPU: L2 cache: 256K
    [    0.400213] CPU: L3 cache: 4096K
    [    0.400223] CPU2: Thermal monitoring enabled (TM1)
    [    0.400226] CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
    [    0.400320] CPU2: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz stepping 05
    [    0.400327] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    [    0.420359] Booting processor 3 APIC 0x5 ip 0x6000
    [    0.430441] Initializing CPU#3
    [    0.507934] CPU: Physical Processor ID: 0
    [    0.507935] CPU: Processor Core ID: 2
    [    0.507936] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.507937] CPU: L2 cache: 256K
    [    0.507938] CPU: L3 cache: 4096K
    [    0.507948] CPU3: Thermal monitoring enabled (TM1)
    [    0.507950] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
    [    0.508027] CPU3: Intel(R) Core(TM) i5 CPU         650  @ 3.20GHz stepping 05
    [    0.508033] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    [    0.528006] Brought up 4 CPUs
    [    0.528008] Total of 4 processors activated (25536.66 BogoMIPS).
    [    0.529279] CPU0 attaching sched-domain:
    [    0.529283]  domain 0: span 0,2 level SIBLING
    [    0.529285]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
    [    0.529288]   domain 1: span 0-3 level MC
    [    0.529289]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [    0.529294] CPU1 attaching sched-domain:
    [    0.529295]  domain 0: span 1,3 level SIBLING
    [    0.529297]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
    [    0.529299]   domain 1: span 0-3 level MC
    [    0.529301]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [    0.529304] CPU2 attaching sched-domain:
    [    0.529305]  domain 0: span 0,2 level SIBLING
    [    0.529306]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
    [    0.529309]   domain 1: span 0-3 level MC
    [    0.529310]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [    0.529313] CPU3 attaching sched-domain:
    [    0.529314]  domain 0: span 1,3 level SIBLING
    [    0.529315]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
    [    0.529318]   domain 1: span 0-3 level MC
    [    0.529319]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [    0.529530] devtmpfs: initialized
    [    0.529763] regulator: core version 0.5
    [    0.529784] Time: 16:37:15  Date: 06/04/11
    [    0.529814] NET: Registered protocol family 16
    [    0.529879] Trying to unpack rootfs image as initramfs...
    [    0.529885] EISA bus registered
    [    0.529891] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.529892] ACPI: bus type pci registered
    [    0.529936] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.529938] PCI: Not using MMCONFIG.
    [    0.530005] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.530006] PCI: Using configuration type 1 for base access
    [    0.530564] bio: create slab <bio-0> at 0
    [    0.531126] ACPI: EC: Look up EC in DSDT
    [    0.532586] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.536709] ACPI: Interpreter enabled
    [    0.536711] ACPI: (supports S0 S3 S4 S5)
    [    0.536724] ACPI: Using IOAPIC for interrupt routing
    [    0.536760] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.538175] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    [    0.538177] PCI: Using MMCONFIG for extended config space
    [    0.544640] ACPI: No dock devices found.
    [    0.544893] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.544948] pci 0000:00:02.0: reg 10 64bit mmio: [0xfb800000-0xfbbfffff]
    [    0.544952] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
    [    0.544955] pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07]
    [    0.545023] pci 0000:00:16.0: reg 10 64bit mmio: [0xfbefa000-0xfbefa00f]
    [    0.545075] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [    0.545079] pci 0000:00:16.0: PME# disabled
    [    0.545123] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbef8000-0xfbef83ff]
    [    0.545167] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [    0.545170] pci 0000:00:1a.0: PME# disabled
    [    0.545200] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbef4000-0xfbef7fff]
    [    0.545232] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.545235] pci 0000:00:1b.0: PME# disabled
    [    0.545282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.545284] pci 0000:00:1c.0: PME# disabled
    [    0.545333] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [    0.545336] pci 0000:00:1c.5: PME# disabled
    [    0.545376] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbef2000-0xfbef23ff]
    [    0.545421] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [    0.545424] pci 0000:00:1d.0: PME# disabled
    [    0.545562] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887]
    [    0.545567] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
    [    0.545571] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487]
    [    0.545575] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
    [    0.545579] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe08f]
    [    0.545583] pci 0000:00:1f.2: reg 24 io port: [0xe000-0xe00f]
    [    0.545617] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbef0000-0xfbef00ff]
    [    0.545627] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
    [    0.545725] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff]
    [    0.545789] pci 0000:02:00.0: PME# supported from D3hot D3cold
    [    0.545792] pci 0000:02:00.0: PME# disabled
    [    0.545841] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
    [    0.545881] pci 0000:00:1e.0: transparent bridge
    [    0.545897] pci_bus 0000:00: on NUMA node 0
    [    0.545900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.546032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
    [    0.546090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
    [    0.546135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
    [    0.554164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.554244] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.554320] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.554399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.554477] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
    [    0.554558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
    [    0.554637] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.554716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.554786] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.554790] vgaarb: loaded
    [    0.554865] SCSI subsystem initialized
    [    0.554954] libata version 3.00 loaded.
    [    0.555011] usbcore: registered new interface driver usbfs
    [    0.555017] usbcore: registered new interface driver hub
    [    0.555036] usbcore: registered new device driver usb
    [    0.555116] ACPI: WMI: Mapper loaded
    [    0.555117] PCI: Using ACPI for IRQ routing
    [    0.555209] NetLabel: Initializing
    [    0.555210] NetLabel:  domain hash size = 128
    [    0.555211] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.555218] NetLabel:  unlabeled traffic allowed by default
    [    0.555251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
    [    0.555255] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [    0.559814] hpet: hpet2 irq 24 for MSI
    [    0.559966] hpet: hpet3 irq 25 for MSI
    [    0.563941] hpet: hpet4 irq 26 for MSI
    [    0.567924] hpet: hpet5 irq 27 for MSI
    [    0.567939] Switching to clocksource tsc
    [    0.569301] AppArmor: AppArmor Filesystem Enabled
    [    0.569312] pnp: PnP ACPI init
    [    0.569323] ACPI: bus type pnp registered
    [    0.571031] pnp: PnP ACPI: found 14 devices
    [    0.571033] ACPI: ACPI bus type pnp unregistered
    [    0.571035] PnPBIOS: Disabled by ACPI PNP
    [    0.571044] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
    [    0.571045] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
    [    0.571047] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
    [    0.571048] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
    [    0.571053] system 00:06: ioport range 0xa00-0xa0f has been reserved
    [    0.571054] system 00:06: ioport range 0xa10-0xa1f has been reserved
    [    0.571056] system 00:06: ioport range 0xa20-0xa2f has been reserved
    [    0.571057] system 00:06: ioport range 0xa30-0xa3f has been reserved
    [    0.571060] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    [    0.571062] system 00:07: ioport range 0x800-0x87f has been reserved
    [    0.571063] system 00:07: ioport range 0x500-0x57f has been reserved
    [    0.571065] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [    0.571066] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
    [    0.571068] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
    [    0.571071] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
    [    0.571076] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.571077] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
    [    0.571080] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    [    0.571083] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
    [    0.571085] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
    [    0.571086] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    [    0.571088] system 00:0d: iomem range 0x100000-0xbbffffff could not be reserved
    [    0.571090] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
    [    0.605617] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    [    0.605620] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
    [    0.605624] pci 0000:00:1c.0:   MEM window: 0xc0000000-0xc01fffff
    [    0.605626] pci 0000:00:1c.0:   PREFETCH window: 0x000000c0200000-0x000000c03fffff
    [    0.605631] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
    [    0.605632] pci 0000:00:1c.5:   IO window: disabled
    [    0.605635] pci 0000:00:1c.5:   MEM window: 0xfbf00000-0xfbffffff
    [    0.605637] pci 0000:00:1c.5:   PREFETCH window: disabled
    [    0.605641] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    [    0.605642] pci 0000:00:1e.0:   IO window: disabled
    [    0.605646] pci 0000:00:1e.0:   MEM window: disabled
    [    0.605648] pci 0000:00:1e.0:   PREFETCH window: disabled
    [    0.605658] pci 0000:00:1c.0: enabling device (0104 -> 0107)
    [    0.605664]   alloc irq_desc for 17 on node -1
    [    0.605665]   alloc kstat_irqs on node -1
    [    0.605670] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.605674] pci 0000:00:1c.0: setting latency timer to 64
    [    0.605680]   alloc irq_desc for 16 on node -1
    [    0.605680]   alloc kstat_irqs on node -1
    [    0.605683] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    0.605685] pci 0000:00:1c.5: setting latency timer to 64
    [    0.605690] pci 0000:00:1e.0: setting latency timer to 64
    [    0.605693] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.605694] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.605696] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
    [    0.605697] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xc01fffff]
    [    0.605699] pci_bus 0000:01: resource 2 pref mem [0xc0200000-0xc03fffff]
    [    0.605700] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
    [    0.605702] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
    [    0.605703] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
    [    0.605726] NET: Registered protocol family 2
    [    0.605787] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.605953] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.606196] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.606283] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.606285] TCP reno registered
    [    0.606331] NET: Registered protocol family 1
    [    0.606341] pci 0000:00:02.0: Boot video device
    [    0.606557] cpufreq-nforce2: No nForce2 chipset.
    [    0.606572] Scanning for low memory corruption every 60 seconds
    [    0.606637] audit: initializing netlink socket (disabled)
    [    0.606643] type=2000 audit(1307205434.435:1): initialized
    [    0.613424] highmem bounce pool size: 64 pages
    [    0.613428] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.614352] VFS: Disk quotas dquot_6.5.2
    [    0.614385] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.614718] fuse init (API version 7.13)
    [    0.614766] msgmni has been set to 1665
    [    0.614926] alg: No test for stdrng (krng)
    [    0.614961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.614963] io scheduler noop registered
    [    0.614964] io scheduler anticipatory registered
    [    0.614965] io scheduler deadline registered
    [    0.614988] io scheduler cfq registered (default)
    [    0.615068]   alloc irq_desc for 29 on node -1
    [    0.615069]   alloc kstat_irqs on node -1
    [    0.615076] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
    [    0.615082] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.615156]   alloc irq_desc for 30 on node -1
    [    0.615157]   alloc kstat_irqs on node -1
    [    0.615162] pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X
    [    0.615167] pcieport 0000:00:1c.5: setting latency timer to 64
    [    0.615209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.615222] Firmware did not grant requested _OSC control
    [    0.615241] Firmware did not grant requested _OSC control
    [    0.615249] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.615311] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    0.615314] ACPI: Power Button [PWRB]
    [    0.615339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.615341] ACPI: Power Button [PWRF]
    [    0.616327] ACPI: SSDT bb7900f0 01550 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.616658] ACPI: SSDT bb791640 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
    [    0.616967] Monitor-Mwait will be used to enter C-1 state
    [    0.616985] Monitor-Mwait will be used to enter C-2 state
    [    0.617000] Monitor-Mwait will be used to enter C-3 state
    [    0.617028] processor LNXCPU:00: registered as cooling_device0
    [    0.617225] processor LNXCPU:01: registered as cooling_device1
    [    0.617419] processor LNXCPU:02: registered as cooling_device2
    [    0.623889] processor LNXCPU:03: registered as cooling_device3
    [    0.625416] isapnp: Scanning for PnP cards...
    [    0.626157] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.626921] brd: module loaded
    [    0.627186] loop: module loaded
    [    0.627234] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [    0.627285] ata_piix 0000:00:1f.2: version 2.13
    [    0.627295]   alloc irq_desc for 19 on node -1
    [    0.627297]   alloc kstat_irqs on node -1
    [    0.627301] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.627304] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.653069] Freeing initrd memory: 7773k freed
    [    0.779414] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    0.779483] scsi0 : ata_piix
    [    0.779562] scsi1 : ata_piix
    [    0.780499] ata1: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 19
    [    0.780503] ata2: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 19
    [    0.780708] Fixed MDIO Bus: probed
    [    0.780728] PPP generic driver version 2.4.2
    [    0.780776] tun: Universal TUN/TAP device driver, 1.6
    [    0.780777] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.780832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.780848] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.780861] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.780864] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [    0.780881] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [    0.780900] ehci_hcd 0000:00:1a.0: debug port 2
    [    0.784808] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
    [    0.784817] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbef8000
    [    0.799336] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [    0.799393] usb usb1: configuration #1 chosen from 1 choice
    [    0.799409] hub 1-0:1.0: USB hub found
    [    0.799414] hub 1-0:1.0: 2 ports detected
    [    0.799445]   alloc irq_desc for 23 on node -1
    [    0.799446]   alloc kstat_irqs on node -1
    [    0.799451] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.799457] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.799459] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [    0.799477] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    0.799493] ehci_hcd 0000:00:1d.0: debug port 2
    [    0.803406] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
    [    0.803414] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbef2000
    [    0.819286] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [    0.819331] usb usb2: configuration #1 chosen from 1 choice
    [    0.819345] hub 2-0:1.0: USB hub found
    [    0.819348] hub 2-0:1.0: 2 ports detected
    [    0.819373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.819380] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.819424] PNP: No PS/2 controller found. Probing ports directly.
    [    0.819758] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.819762] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.819815] mice: PS/2 mouse device common for all mice
    [    0.819873] rtc_cmos 00:03: RTC can wake from S4
    [    0.819902] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.819924] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.819982] device-mapper: uevent: version 1.0.3
    [    0.820041] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    0.820111] device-mapper: multipath: version 1.1.0 loaded
    [    0.820114] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    0.820179] EISA: Probing bus 0 at eisa.0
    [    0.820183] Cannot allocate resource for EISA slot 1
    [    0.820199] EISA: Detected 0 cards.
    [    0.820366] cpuidle: using governor ladder
    [    0.820486] cpuidle: using governor menu
    [    0.820709] TCP cubic registered
    [    0.820798] NET: Registered protocol family 10
    [    0.821053] lo: Disabled Privacy Extensions
    [    0.821219] NET: Registered protocol family 17
    [    0.822474] Using IPI No-Shortcut mode
    [    0.822521] PM: Resume from disk failed.
    [    0.822529] registered taskstats version 1
    [    0.822756]   Magic number: 15:576:640
    [    0.822824] rtc_cmos 00:03: setting system clock to 2011-06-04 16:37:15 UTC (1307205435)
    [    0.822827] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.822828] EDD information not available.
    [    0.992735] isapnp: No Plug & Play device found
    [    1.110406] usb 1-1: new high speed USB device using ehci_hcd and address 2
    [    1.243046] usb 1-1: configuration #1 chosen from 1 choice
    [    1.243218] hub 1-1:1.0: USB hub found
    [    1.243287] hub 1-1:1.0: 6 ports detected
    [    1.354383] usb 2-1: new high speed USB device using ehci_hcd and address 2
    [    1.486541] usb 2-1: configuration #1 chosen from 1 choice
    [    1.486769] hub 2-1:1.0: USB hub found
    [    1.486989] hub 2-1:1.0: 8 ports detected
    [    1.558046] usb 1-1.2: new low speed USB device using ehci_hcd and address 3
    [    1.573898] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.573912] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.573916] ata2.01: SATA link down (SStatus 0 SControl 300)
    [    1.573971] ata1.01: SATA link down (SStatus 0 SControl 300)
    [    1.573982] ata2.01: link offline, clearing class 3 to NONE
    [    1.582121] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B104, max UDMA/100
    [    1.582376] ata1.00: ATA-8: ST3750528AS, CC46, max UDMA/133
    [    1.582381] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    1.598109] ata2.00: configured for UDMA/100
    [    1.598351] ata1.00: configured for UDMA/133
    [    1.598556] scsi 0:0:0:0: Direct-Access     ATA      ST3750528AS      CC46 PQ: 0 ANSI: 5
    [    1.598703] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [    1.598707] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.598740] sd 0:0:0:0: [sda] Write Protect is off
    [    1.598742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.598757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.598832]  sda:
    [    1.607494] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH50N    B104 PQ: 0 ANSI: 5
    [    1.610560]  sda1 sda2 sda3 sda4 < sda5sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.630869] Uniform CD-ROM driver Revision: 3.20
    [    1.630970] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.631012] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.643500]  sda6 >
    [    1.643827] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.643841] Freeing unused kernel memory: 660k freed
    [    1.644155] Write protecting the kernel text: 4688k
    [    1.644212] Write protecting the kernel read-only data: 1844k
    [    1.655935] usb 1-1.2: configuration #1 chosen from 1 choice
    [    1.657777] udev: starting version 151
    [    1.679391] tg3.c:v3.102 (September 1, 2009)
    [    1.679408] tg3 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.679417] tg3 0000:02:00.0: setting latency timer to 64
    [    1.690524] tg3 mdio bus: probed
    [    1.704548] eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address 84:2b:2b:c0:bc:68
    [    1.704552] eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
    [    1.704554] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [    1.704556] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [    1.706183] usbcore: registered new interface driver hiddev
    [    1.708777] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
    [    1.708849] generic-usb 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1a.0-1.2/input0
    [    1.708871] usbcore: registered new interface driver usbhid
    [    1.708873] usbhid: v2.6:USB HID core driver
    [    1.730101] usb 1-1.3: new low speed USB device using ehci_hcd and address 4
    [    1.824952] usb 1-1.3: configuration #1 chosen from 1 choice
    [    1.827387] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
    [    1.827452] generic-usb 0003:0461:4D81.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.3/input0
    [    1.901152] usb 1-1.4: new high speed USB device using ehci_hcd and address 5
    [    2.000643] usb 1-1.4: configuration #1 chosen from 1 choice
    [    2.063408] EXT4-fs (sda5): mounted filesystem with ordered data mode
    [    2.069606] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
    [    2.163649] usb 2-1.2: configuration #1 chosen from 1 choice
    [    8.484707] udev: starting version 151
    [    8.514101] Linux agpgart interface v0.103
    [    8.516743] agpgart-intel 0000:00:00.0: Intel IGDNG/D Chipset
    [    8.517475] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
    [    8.529475] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [    8.535401] lp: driver loaded but no devices found
    [    8.543140] dell-wmi: No known WMI GUID found
    [    8.563609] Adding 8854520k swap on /dev/sda6.  Priority:-1 extents:1 across:8854520k 
    [    8.601613] type=1505 audit(1307219843.296:2):  operation="profile_load" pid=609 name="/sbin/dhclient3"
    [    8.602044] type=1505 audit(1307219843.296:3):  operation="profile_load" pid=609 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [    8.602344] type=1505 audit(1307219843.296:4):  operation="profile_load" pid=609 name="/usr/lib/connman/scripts/dhclient-script"
    [    8.612744] [drm] Initialized drm 1.1.0 20060810
    [    8.613351] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [    8.642989] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    8.642993] i915 0000:00:02.0: setting latency timer to 64
    [    8.646936] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
    [    8.646939] [drm] MTRR allocation failed.  Graphics performance may suffer.
    [    8.646981]   alloc irq_desc for 31 on node -1
    [    8.646983]   alloc kstat_irqs on node -1
    [    8.646991] i915 0000:00:02.0: irq 31 for MSI/MSI-X
    [    8.646995] [drm] set up 31M of stolen space
    [    8.652062] Initializing USB Mass Storage driver...
    [    8.652609] scsi2 : SCSI emulation for USB Mass Storage devices
    [    8.652678] usbcore: registered new interface driver usb-storage
    [    8.652680] USB Mass Storage support registered.
    [    8.654786] usb-storage: device found at 3
    [    8.654788] usb-storage: waiting for device to settle before scanning
    [    8.807372] fb0: inteldrmfb frame buffer device
    [    8.807374] registered panic notifier
    [    8.807389] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [    8.807486]   alloc irq_desc for 22 on node -1
    [    8.807488]   alloc kstat_irqs on node -1
    [    8.807495] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    8.807522] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [    8.808715] vga16fb: initializing
    [    8.808718] vga16fb: mapped to 0xc00a0000
    [    8.808720] vga16fb: not registering due to another framebuffer present
    [    8.870428] Console: switching to colour frame buffer device 240x67
    [    8.925047] hda_codec: ALC887: BIOS auto-probing.
    [    8.926303] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
    [    9.237071] type=1505 audit(1307219843.932:5):  operation="profile_load" pid=875 name="/usr/sbin/mysqld-akonadi"
    [    9.237082] type=1505 audit(1307219843.932:6):  operation="profile_load" pid=876 name="/usr/sbin/tcpdump"
    [    9.237262] type=1505 audit(1307219843.932:7):  operation="profile_replace" pid=873 name="/sbin/dhclient3"
    [    9.237636] type=1505 audit(1307219843.932:8):  operation="profile_replace" pid=873 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [    9.237657] type=1505 audit(1307219843.932:9):  operation="profile_load" pid=874 name="/usr/lib/cups/backend/cups-pdf"
    [    9.237828] type=1505 audit(1307219843.932:10):  operation="profile_replace" pid=873 name="/usr/lib/connman/scripts/dhclient-script"
    [    9.238067] type=1505 audit(1307219843.932:11):  operation="profile_load" pid=874 name="/usr/sbin/cupsd"
    [    9.301115]   alloc irq_desc for 32 on node -1
    [    9.301117]   alloc kstat_irqs on node -1
    [    9.301129] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
    [    9.324737] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [    9.588785] ppdev: user-space parallel port driver
    [    9.850579] tg3: eth0: Link is down.
    [    9.987837] CPU0 attaching NULL sched-domain.
    [    9.987840] CPU1 attaching NULL sched-domain.
    [    9.987841] CPU2 attaching NULL sched-domain.
    [    9.987842] CPU3 attaching NULL sched-domain.
    [   10.037876] CPU0 attaching sched-domain:
    [   10.037882]  domain 0: span 0,2 level SIBLING
    [   10.037886]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
    [   10.037893]   domain 1: span 0-3 level MC
    [   10.037896]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [   10.037905] CPU1 attaching sched-domain:
    [   10.037907]  domain 0: span 1,3 level SIBLING
    [   10.037910]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
    [   10.037916]   domain 1: span 0-3 level MC
    [   10.037919]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [   10.037926] CPU2 attaching sched-domain:
    [   10.037931]  domain 0: span 0,2 level SIBLING
    [   10.037932]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
    [   10.037935]   domain 1: span 0-3 level MC
    [   10.037936]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [   10.037939] CPU3 attaching sched-domain:
    [   10.037940]  domain 0: span 1,3 level SIBLING
    [   10.037941]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
    [   10.037944]   domain 1: span 0-3 level MC
    [   10.037945]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [   10.038238] CPU0 attaching NULL sched-domain.
    [   10.038241] CPU1 attaching NULL sched-domain.
    [   10.038242] CPU2 attaching NULL sched-domain.
    [   10.038243] CPU3 attaching NULL sched-domain.
    [   10.081777] CPU0 attaching sched-domain:
    [   10.081782]  domain 0: span 0,2 level SIBLING
    [   10.081786]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
    [   10.081793]   domain 1: span 0-3 level MC
    [   10.081796]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [   10.081805] CPU1 attaching sched-domain:
    [   10.081807]  domain 0: span 1,3 level SIBLING
    [   10.081810]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
    [   10.081816]   domain 1: span 0-3 level MC
    [   10.081819]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [   10.081826] CPU2 attaching sched-domain:
    [   10.081830]  domain 0: span 0,2 level SIBLING
    [   10.081832]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
    [   10.081834]   domain 1: span 0-3 level MC
    [   10.081835]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [   10.081838] CPU3 attaching sched-domain:
    [   10.081839]  domain 0: span 1,3 level SIBLING
    [   10.081840]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
    [   10.081843]   domain 1: span 0-3 level MC
    [   10.081844]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [   13.641599] usb-storage: device scan complete
    [   13.642339] scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
    [   13.643016] scsi 2:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [   13.643669] scsi 2:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
    [   13.644450] scsi 2:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
    [   13.645142] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [   13.645252] sd 2:0:0:1: Attached scsi generic sg3 type 0
    [   13.645353] sd 2:0:0:2: Attached scsi generic sg4 type 0
    [   13.645461] sd 2:0:0:3: Attached scsi generic sg5 type 0
    [   13.650193] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [   13.650849] sd 2:0:0:1: [sdc] Attached SCSI removable disk
    [   13.651470] sd 2:0:0:2: [sdd] Attached SCSI removable disk
    [   13.652096] sd 2:0:0:3: [sde] Attached SCSI removable disk
    [  169.317323] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
    [  169.387558] CPU0 attaching NULL sched-domain.
    [  169.387565] CPU1 attaching NULL sched-domain.
    [  169.387569] CPU2 attaching NULL sched-domain.
    [  169.387572] CPU3 attaching NULL sched-domain.
    [  169.413068] CPU0 attaching sched-domain:
    [  169.413072]  domain 0: span 0,2 level SIBLING
    [  169.413076]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
    [  169.413083]   domain 1: span 0-3 level MC
    [  169.413086]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [  169.413094] CPU1 attaching sched-domain:
    [  169.413096]  domain 0: span 1,3 level SIBLING
    [  169.413099]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
    [  169.413105]   domain 1: span 0-3 level MC
    [  169.413108]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [  169.413115] CPU2 attaching sched-domain:
    [  169.413117]  domain 0: span 0,2 level SIBLING
    [  169.413120]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
    [  169.413126]   domain 1: span 0-3 level MC
    [  169.413129]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [  169.413136] CPU3 attaching sched-domain:
    [  169.413138]  domain 0: span 1,3 level SIBLING
    [  169.413141]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
    [  169.413147]   domain 1: span 0-3 level MC
    [  169.413149]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [  169.413713] CPU0 attaching NULL sched-domain.
    [  169.413716] CPU1 attaching NULL sched-domain.
    [  169.413719] CPU2 attaching NULL sched-domain.
    [  169.413721] CPU3 attaching NULL sched-domain.
    [  169.456958] CPU0 attaching sched-domain:
    [  169.456962]  domain 0: span 0,2 level SIBLING
    [  169.456966]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
    [  169.456972]   domain 1: span 0-3 level MC
    [  169.456975]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [  169.456983] CPU1 attaching sched-domain:
    [  169.456986]  domain 0: span 1,3 level SIBLING
    [  169.456989]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
    [  169.456995]   domain 1: span 0-3 level MC
    [  169.456997]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [  169.457004] CPU2 attaching sched-domain:
    [  169.457007]  domain 0: span 0,2 level SIBLING
    [  169.457009]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
    [  169.457015]   domain 1: span 0-3 level MC
    [  169.457018]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
    [  169.457025] CPU3 attaching sched-domain:
    [  169.457027]  domain 0: span 1,3 level SIBLING
    [  169.457030]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
    [  169.457036]   domain 1: span 0-3 level MC
    [  169.457038]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
    [ 1505.066608] usb 2-1.3: new high speed USB device using ehci_hcd and address 4
    [ 1505.164109] usb 2-1.3: configuration #1 chosen from 1 choice
    [ 1505.164499] scsi3 : SCSI emulation for USB Mass Storage devices
    [ 1505.164601] usb-storage: device found at 4
    [ 1505.164605] usb-storage: waiting for device to settle before scanning
    [ 1510.150904] usb-storage: device scan complete
    [ 1510.151483] scsi 3:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.21 PQ: 0 ANSI: 2
    [ 1510.152013] scsi 3:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  3.21 PQ: 0 ANSI: 2
    [ 1510.153047] sd 3:0:0:0: Attached scsi generic sg6 type 0
    [ 1510.153803] sd 3:0:0:0: [sdf] 1992334 512-byte logical blocks: (1.02 GB/972 MiB)
    [ 1510.155544] sd 3:0:0:0: [sdf] Write Protect is off
    [ 1510.155553] sd 3:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [ 1510.155558] sd 3:0:0:0: [sdf] Assuming drive cache: write through
    [ 1510.160134] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
    [ 1510.160231] sr 3:0:0:1: Attached scsi CD-ROM sr1
    [ 1510.160696] sr 3:0:0:1: Attached scsi generic sg7 type 5
    [ 1510.161744] sd 3:0:0:0: [sdf] Assuming drive cache: write through
    [ 1510.161748]  sdf:
    [ 1510.169478] sd 3:0:0:0: [sdf] Assuming drive cache: write through
    [ 1510.169481] sd 3:0:0:0: [sdf] Attached SCSI removable disk
    [ 1575.349398] usb 2-1.3: USB disconnect, address 4
    [ 1654.453160] usb 2-1.3: new high speed USB device using ehci_hcd and address 5
    [ 1654.546424] usb 2-1.3: configuration #1 chosen from 1 choice
    [ 1654.546817] scsi4 : SCSI emulation for USB Mass Storage devices
    [ 1654.546976] usb-storage: device found at 5
    [ 1654.546978] usb-storage: waiting for device to settle before scanning
    [ 1659.533172] usb-storage: device scan complete
    [ 1659.533763] scsi 4:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.21 PQ: 0 ANSI: 2
    [ 1659.534257] scsi 4:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  3.21 PQ: 0 ANSI: 2
    [ 1659.534878] sd 4:0:0:0: Attached scsi generic sg6 type 0
    [ 1659.538516] sd 4:0:0:0: [sdf] 1992334 512-byte logical blocks: (1.02 GB/972 MiB)
    [ 1659.543784] sd 4:0:0:0: [sdf] Write Protect is off
    [ 1659.543793] sd 4:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [ 1659.543798] sd 4:0:0:0: [sdf] Assuming drive cache: write through
    [ 1659.548342] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
    [ 1659.548531] sr 4:0:0:1: Attached scsi CD-ROM sr1
    [ 1659.549476] sd 4:0:0:0: [sdf] Assuming drive cache: write through
    [ 1659.549484]  sdf:
    [ 1659.549595] sr 4:0:0:1: Attached scsi generic sg7 type 5
    [ 1659.554053] 
    [ 1659.559020] sd 4:0:0:0: [sdf] Assuming drive cache: write through
    [ 1659.559025] sd 4:0:0:0: [sdf] Attached SCSI removable disk
    [ 2286.665965] Disabling lock debugging due to kernel taint
    [ 2286.677187] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
    [ 2286.687672] usbcore: registered new interface driver ndiswrapper
    Code:
    paul@Pauls-Linux:~$ uname -r
    2.6.32-28-generic
    Attached Files Attached Files
    Last edited by MikeTbob; 06-04-2011 at 11:58 PM. Reason: Added output of commands.

  9. #9
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    A command did not work, we need it too.
    Code:
    ifconfig -a
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  10. #10
    Just Joined!
    Join Date
    Jun 2011
    Posts
    9
    What does that mean? I have downloaded ndiswrapper through .deb files. I have installed the drivers but my USB Adapter shows up disconnected in the System->Removable Devices but it shows up in lsusb. And a couple of hours ago it did show up as connected and was on as the blue light was on. I am so lost now I don't know what to do next. I have been following this:
    help"dot"ubuntu"dot"com"slash"community"slash"Wifi Docs"slash"Driver"slash"Ndiswrapper

    But I install everything but then when I go to network then I do not see any wireless settings.
    Last edited by Polofiesta; 06-05-2011 at 01:02 AM.

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •