Results 1 to 10 of 17
Hello there!
I joined this forum so I can say my experience with the crappy belkin N150 router.
It appears you need to run the setup cd under windows to ...
- 06-18-2011 #1Just Joined!
- Join Date
- Jun 2011
- Posts
- 8
crappy belkin N150 router
Hello there!
I joined this forum so I can say my experience with the crappy belkin N150 router.
It appears you need to run the setup cd under windows to make the router 'see' the modem.
Under linux as someone pointed out you can easily enter the router setup from a browser ( enter 192.168.2.1 ) and connect to the router only (wired or wireless connection) but not the internet. Does anyone have any idea what the windows setup is doing to connect the router to the modem and how to do it under linux in the browser?
Thanks in adnvance!
- 06-18-2011 #2
Hello and Welcome!

You can access the router configuration from any browser, on any OS, buy using the default IP of the router. The only purpose of the installation CD is to run a network setup wizard of sorts.
Name your network, set security type, and so on.
Is that what you were wondering?Jay
New users, read this first.
New Member FAQ
Registered Linux User #463940
I do not respond to Private Messages asking for Linux help. Please, keep it on the public boards.
- 06-18-2011 #3Just Joined!
- Join Date
- Jun 2011
- Posts
- 8
Thanks for the quick reply!
I agree with you and I have no problem changing router settings in the browser by using the ip address of the router.
I meant to say there's no way to make the router connect to the modem without using the windows installation cd.
If it's any use I'm running linux mint 9 isadora (based on ubuntu lucid lynx). My isp doesn't have any passwords and the wiring is correct.
- 06-18-2011 #4
Ah... gotcha.
Power cycle your modem before connecting the router. It may be retaining the MAC of your old router in its ARP file.
Power cycle your router after that.Jay
New users, read this first.
New Member FAQ
Registered Linux User #463940
I do not respond to Private Messages asking for Linux help. Please, keep it on the public boards.
- 06-18-2011 #5
Howdy!
I agree with Jay. The CD has nothing of Value, it only works in Windows because well, Windows needs help seeing everything that isn't built by MS.
Can you post the output of these commands please?
Code:sudo lspci -knn sudo ifconfig -a sudo lsmod
I do not respond to private messages asking for Linux help, Please keep it on the forums only.
All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
- 06-18-2011 #6
I guess I should ask an important question that I should have thought to ask earlier

jarg, are you actually able to reach the router page from your computer right now? Just not connecting to the actual Internet?Jay
New users, read this first.
New Member FAQ
Registered Linux User #463940
I do not respond to Private Messages asking for Linux help. Please, keep it on the public boards.
- 06-18-2011 #7Just Joined!
- Join Date
- Jun 2011
- Posts
- 8
the long story
So I should say what's the current situation. The really long story!
In the beginning i tried to do the setup under linux, didn't work cause the router couldn't see the modem, but I could connect to the router. So I went to windows run the setup several times and after a long time the setup managed to connect the router to the modem. I don't know exactly what happened. But it was working.
Then I decided to do a backup using a live cd (parted magic).
Got bored tried to access the wifi. And from that time the router can't see the modem again unless I connect to it with the wire!
As soon as I connect to the wifi the router drops the connection to the modem!!!! So now I'm on wired connection to the router and it works...
sudo lspci -knn
sudo ifconfig -aCode:00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 09) Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 09) Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 09) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Kernel modules: i2c-i801 00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03) 04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Kernel driver in use: wl Kernel modules: wl, ssb 07:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Kernel driver in use: tg3 Kernel modules: tg3
and finallyCode:eth0 Link encap:Ethernet HWaddr 70:5a:b6:65:c5:ad inet addr:192.168.2.3 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::725a:b6ff:fe65:c5ad/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2704893 errors:0 dropped:0 overruns:0 frame:0 TX packets:1286978 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3668821810 (3.6 GB) TX bytes:234817417 (234.8 MB) Interrupt:17 eth1 Link encap:Ethernet HWaddr c4:17:fe:e0:24:2c inet6 addr: fe80::c617:feff:fee0:242c/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:501 errors:0 dropped:0 overruns:0 frame:0 TX packets:501 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:63761 (63.7 KB) TX bytes:63761 (63.7 KB) pan0 Link encap:Ethernet HWaddr fe:d9:ea:e6:09:fb BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sudo lsmod
Sorry for the huge post!!!Code:Module Size Used by btrfs 481102 0 zlib_deflate 21834 1 btrfs crc32c 2983 1 libcrc32c 1244 1 btrfs ufs 73778 0 qnx4 7736 0 hfsplus 77801 0 hfs 47301 0 minix 29315 0 ntfs 97936 0 vfat 10866 0 msdos 7936 0 fat 55350 2 vfat,msdos jfs 184803 0 xfs 540364 0 exportfs 4202 1 xfs reiserfs 243856 0 hidp 14218 1 hid 83600 1 hidp rfcomm 40393 4 sco 9649 2 bridge 53152 0 stp 2171 1 bridge bnep 11884 2 l2cap 34807 21 hidp,rfcomm,bnep btusb 13033 4 bluetooth 58685 10 hidp,rfcomm,sco,bnep,l2cap,btusb binfmt_misc 7960 1 ppdev 6375 0 ipt_REJECT 2384 1 ipt_LOG 5370 5 xt_limit 2180 7 xt_tcpudp 2667 7 joydev 11104 0 ipt_addrtype 2055 4 dm_crypt 13043 0 xt_state 1490 7 snd_hda_codec_conexant 28873 1 ip6table_filter 1712 1 ip6_tables 19428 1 ip6table_filter snd_hda_intel 25805 4 nf_nat_irc 1577 0 snd_hda_codec 85759 2 snd_hda_codec_conexant,snd_hda_intel snd_hwdep 6924 1 snd_hda_codec snd_pcm_oss 41394 0 snd_mixer_oss 16299 1 snd_pcm_oss nf_conntrack_irc 4429 1 nf_nat_irc snd_pcm 87946 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 1782 0 snd_seq_oss 31191 0 nf_nat_ftp 2513 0 nf_nat 19286 2 nf_nat_irc,nf_nat_ftp snd_seq_midi 5829 0 nf_conntrack_ipv4 12742 9 nf_nat nf_defrag_ipv4 1481 1 nf_conntrack_ipv4 snd_rawmidi 23420 1 snd_seq_midi snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi nf_conntrack_ftp 7126 1 nf_nat_ftp snd_seq 57481 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23649 2 snd_pcm,snd_seq snd_seq_device 6888 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq nf_conntrack 73326 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp snd 71283 19 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 62851 0 iptable_filter 1841 1 lib80211_crypt_tkip 8676 0 soundcore 8052 1 snd videodev 40518 1 uvcvideo v4l1_compat 15495 2 uvcvideo,videodev snd_page_alloc 8500 2 snd_hda_intel,snd_pcm wl 1964968 0 lib80211 6151 2 lib80211_crypt_tkip,wl psmouse 64576 0 serio_raw 4918 0 v4l2_compat_ioctl32 11892 1 videodev ip_tables 18201 1 iptable_filter lp 9336 0 parport 37160 2 ppdev,lp x_tables 22361 8 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6_tables,ip_tables dm_raid45 75532 0 xor 4685 1 dm_raid45 vesafb 4442 0 fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit i915 323877 2 drm_kms_helper 30742 1 i915 tg3 122350 0 ahci 38030 2 drm 198886 3 i915,drm_kms_helper i2c_algo_bit 6024 1 i915 video 20623 1 i915 output 2503 1 video intel_agp 29319 2 i915 ramzswap 7857 1 xvmalloc 5054 1 ramzswap lzo_decompress 2533 1 ramzswap lzo_compress 2325 1 ramzswap
Last edited by jarg; 06-18-2011 at 02:57 AM. Reason: typos
- 06-18-2011 #8Just Joined!
- Join Date
- Jun 2011
- Posts
- 8
also
I did power cycle everything!
- 06-18-2011 #9Just Joined!
- Join Date
- Jun 2011
- Posts
- 8
Some more info. Idk if it's useful.
Another laptop can connect to the wifi with no problems.
As soon as I (my laptop) connect to the wifi the router drops the connection to the modem and no one else can access the internet (wired or wifi).
This happens when I'm under both windows and linux on wifi...
Weird stuff...
I'll try to connect to other wifi tomorrow with this laptop to make sure my network adapter works.
Thanks for any input!
- 06-18-2011 #10
It looks good to me. I'm not sure if it's the same driver or not but you might have better luck using this one.
Broadcom.com - 802.11 Linux STA driver
The README:
http://www.broadcom.com/docs/linux_sta/README.txtI do not respond to private messages asking for Linux help, Please keep it on the forums only.
All new users please read this.** Forum FAQS. ** Adopt an unanswered post.


Reply With Quote