driver for WIRELESS LAN PRISM3 802.11B WM168 USB MODULE

[ibbos]

I have a flybook A33i and when starting to get in network doesn't respond . I gues are the drivers .
Any help ?

Yiannis

[jayd512]

Hello and Welcome!

Take a look here.
Post back with all requested info.

[ibbos]

card info3.txt
O.k. In attached is information collected

[jayd512]

There is some info missing there.
I think you may have missed the first handful of commands.

[ibbos]

there is some info missing there.
I think you may have missed the first handful of commands.

the whole file is 27,5 kb and system does not let me more than 19,5

[jayd512]

You can copy and paste all of the info requested.

[ibbos]

You can copy and paste all of the info requested.

here it is;

[    0.000000] Detected 996.240 MHz processor.
[    0.008073] Calibrating delay loop (skipped), value calculated using timer frequency.. 1992.48 BogoMIPS (lpj=3984960)
[    0.012392] Security Framework initialized
[    0.012919] AppArmor: AppArmor initialized
[    0.014154] Mount-cache hash table entries: 512
[    0.042643] Initializing cgroup subsys ns
[    0.042709] Initializing cgroup subsys cpuacct
[    0.042762] Initializing cgroup subsys memory
[    0.043199] Initializing cgroup subsys devices
[    0.043225] Initializing cgroup subsys freezer
[    0.043246] Initializing cgroup subsys net_cls
[    0.044792] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
[    0.044817] CPU: L2 Cache: 512K (128 bytes/line)
[    0.044834] CPU: Processor revision 1.5.0.2, 1000 MHz
[    0.044852] CPU: Code Morphing Software revision 4.4.3-10-184
[    0.045016] CPU: 20030618 15:27 official release 4.4.3#1
[    0.045146] CPU serial number disabled.
[    0.045338] Performance Events: 
[    0.045423] Checking 'hlt' instruction... OK.
[    0.072365] SMP alternatives: switching to UP code
[    0.132727] Freeing SMP alternatives: 19k freed
[    0.134453] ACPI: Core revision 20090903
[    0.212618] ACPI: setting ELCR to 0200 (from 0ca0)
[    0.216415] ftrace: converting mcount calls to 66 66 66 66 90
[    0.216524] ftrace: allocating 21771 entries in 43 pages
[    0.237725] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.239216] weird, boot CPU (#0) not listed by the BIOS.
[    0.239348] SMP motherboard not detected.
[    0.240149] Local APIC not detected. Using dummy APIC emulation.
[    0.240310] SMP disabled
[    0.271587] Brought up 1 CPUs
[    0.272354] Total of 1 processors activated (1992.48 BogoMIPS).
[    0.273085] CPU0 attaching NULL sched-domain.
[    0.300278] devtmpfs: initialized
[    0.334219] regulator: core version 0.5
[    0.334615] Time:  0:01:05  Date: 01/01/04
[    0.338471] NET: Registered protocol family 16
[    0.350924] EISA bus registered
[    0.351327] ACPI: bus type pci registered
[    0.365983] PCI: PCI BIOS revision 2.10 entry at 0xfd89c, last bus=0
[    0.366270] PCI: Using configuration type 1 for base access
[    0.396139] bio: create slab <bio-0> at 0
[    0.432292] ACPI: EC: Look up EC in DSDT
[    0.548874] ACPI: Interpreter enabled
[    0.548932] ACPI: (supports S0 S1 S3 S4 S5)
[    0.549470] ACPI: Using PIC for interrupt routing
[    0.630794] ACPI: EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62
[    0.632632] ACPI: No dock devices found.
[    0.658145] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.659027] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8100000-0xe81fffff]
[    0.663953] pci 0000:00:03.0: reg 10 32bit mmio: [0xe8014000-0xe8014fff]
[    0.664135] pci 0000:00:03.0: reg 14 io port: [0x1000-0x10ff]
[    0.664546] pci 0000:00:03.0: PME# supported from D3hot D3cold
[    0.664585] pci 0000:00:03.0: PME# disabled
[    0.665093] pci 0000:00:04.0: reg 10 io port: [0x1400-0x14ff]
[    0.665148] pci 0000:00:04.0: reg 14 32bit mmio: [0xe8015000-0xe8015fff]
[    0.665249] pci 0000:00:04.0: supports D1 D2
[    0.665264] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
[    0.665286] pci 0000:00:04.0: PME# disabled
[    0.667109] pci 0000:00:09.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[    0.667165] pci 0000:00:09.0: reg 14 io port: [0x1800-0x18ff]
[    0.667673] pci 0000:00:09.0: reg 18 32bit mmio: [0xe8000000-0xe800ffff]
[    0.667739] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.668099] pci 0000:00:09.0: supports D1 D2
[    0.668587] pci 0000:00:0a.0: reg 10 io port: [0x1c00-0x1cff]
[    0.668736] pci 0000:00:0a.0: reg 14 32bit mmio: [0xe8018800-0xe80188ff]
[    0.669034] pci 0000:00:0a.0: supports D1 D2
[    0.669054] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.669080] pci 0000:00:0a.0: PME# disabled
[    0.669187] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe8016000-0xe8016fff]
[    0.669268] pci 0000:00:0b.0: supports D1 D2
[    0.669281] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.669299] pci 0000:00:0b.0: PME# disabled
[    0.669392] pci 0000:00:0b.1: reg 10 32bit mmio: [0xe8017000-0xe8017fff]
[    0.669469] pci 0000:00:0b.1: supports D1 D2
[    0.669481] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
[    0.669499] pci 0000:00:0b.1: PME# disabled
[    0.669803] pci 0000:00:0b.2: reg 10 32bit mmio: [0xe8018c00-0xe8018cff]
[    0.669918] pci 0000:00:0b.2: supports D1 D2
[    0.669934] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
[    0.669954] pci 0000:00:0b.2: PME# disabled
[    0.671430] pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.671583] pci 0000:00:0c.0: supports D1 D2
[    0.671601] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
[    0.671624] pci 0000:00:0c.0: PME# disabled
[    0.672057] pci 0000:00:0c.1: reg 10 32bit mmio: [0xe8018000-0xe80187ff]
[    0.672326] pci 0000:00:0c.1: reg 14 32bit mmio: [0xe8010000-0xe8013fff]
[    0.672560] pci 0000:00:0c.1: supports D1 D2
[    0.672579] pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot
[    0.672602] pci 0000:00:0c.1: PME# disabled
[    0.673407] pci 0000:00:0f.0: reg 20 io port: [0x2000-0x200f]
[    0.676387] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
[    0.676421] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
[    0.678861] pci_bus 0000:00: on NUMA node 0
[    0.678923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.701408] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7) *11
[    0.702811] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7) *10
[    0.704719] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11
[    0.706377] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *7
[    0.707562] ACPI: PCI Interrupt Link [LNK5] (IRQs 11) *0, disabled.
[    0.709782] ACPI: PCI Interrupt Link [LNK6] (IRQs 11) *0, disabled.
[    0.711299] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7) *11
[    0.712738] ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7)
[    0.714814] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[    0.717926] vgaarb: loaded
[    0.721940] SCSI subsystem initialized
[    0.723337] libata version 3.00 loaded.
[    0.725243] usbcore: registered new interface driver usbfs
[    0.725361] usbcore: registered new interface driver hub
[    0.726351] usbcore: registered new device driver usb
[    0.729080] ACPI: WMI: Mapper loaded
[    0.729100] PCI: Using ACPI for IRQ routing
[    0.734647] NetLabel: Initializing
[    0.734674] NetLabel:  domain hash size = 128
[    0.734682] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.736265] NetLabel:  unlabeled traffic allowed by default
[    0.737300] Switching to clocksource tsc
[    0.768469] AppArmor: AppArmor Filesystem Enabled
[    0.769018] pnp: PnP ACPI init
[    0.769149] ACPI: bus type pnp registered
[    0.793803] pnp: PnP ACPI: found 11 devices
[    0.793832] ACPI: ACPI bus type pnp unregistered
[    0.793853] PnPBIOS: Disabled by ACPI PNP
[    0.794437] system 00:07: ioport range 0x338-0x33f has been reserved
[    0.794576] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.794606] system 00:07: ioport range 0x40b-0x40b has been reserved
[    0.794631] system 00:07: ioport range 0x480-0x48f has been reserved
[    0.794656] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[    0.794683] system 00:07: ioport range 0x8000-0x803f has been reserved
[    0.794707] system 00:07: ioport range 0x8040-0x805f has been reserved
[    0.794732] system 00:07: iomem range 0xd0000-0xd3fff has been reserved
[    0.794755] system 00:07: iomem range 0xd4000-0xd7fff has been reserved
[    0.794948] system 00:07: iomem range 0xd8000-0xdbfff has been reserved
[    0.794980] system 00:07: iomem range 0xdc000-0xdffff could not be reserved
[    0.795007] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
[    0.838815] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:01
[    0.838842] pci 0000:00:0c.0:   IO window: 0x002400-0x0024ff
[    0.838859] pci 0000:00:0c.0:   IO window: 0x002800-0x0028ff
[    0.838880] pci 0000:00:0c.0:   PREFETCH window: 0x20000000-0x23ffffff
[    0.838895] pci 0000:00:0c.0:   MEM window: 0x24000000-0x27ffffff
[    0.839219] pci 0000:00:0c.0: enabling device (0000 -> 0003)
[    0.841368] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[    0.841400] PCI: setting IRQ 7 as level-triggered
[    0.841431] pci 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[    0.841746] pci 0000:00:0c.0: setting latency timer to 64
[    0.841878] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.841896] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.841992] pci_bus 0000:01: resource 0 io:  [0x2400-0x24ff]
[    0.842008] pci_bus 0000:01: resource 1 io:  [0x2800-0x28ff]
[    0.842021] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x23ffffff]
[    0.842035] pci_bus 0000:01: resource 3 mem: [0x24000000-0x27ffffff]
[    0.843292] NET: Registered protocol family 2
[    0.845415] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.850875] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.851539] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.852213] TCP: Hash tables configured (established 16384 bind 16384)
[    0.852245] TCP reno registered
[    0.854398] NET: Registered protocol family 1
[    0.854642] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[    0.854674] pci 0000:00:09.0: Boot video device
[    0.858192] cpufreq-nforce2: No nForce2 chipset.
[    0.858617] Scanning for low memory corruption every 60 seconds
[    0.862040] audit: initializing netlink socket (disabled)
[    0.862208] type=2000 audit(1072915265.859:1): initialized
[    0.895544] Trying to unpack rootfs image as initramfs...
[    0.924733] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.946254] VFS: Disk quotas dquot_6.5.2
[    0.947213] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.961417] fuse init (API version 7.13)
[    0.968084] msgmni has been set to 930
[    0.984478] alg: No test for stdrng (krng)
[    0.985706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.985739] io scheduler noop registered
[    0.985752] io scheduler anticipatory registered
[    0.985765] io scheduler deadline registered
[    0.985992] io scheduler cfq registered (default)
[    0.990416] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.990906] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.998461] ACPI: AC Adapter [AC] (on-line)
[    1.000306] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.006841] ACPI: Lid Switch [LID]
[    1.008443] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.008494] ACPI: Power Button [PWRB]
[    1.010119] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.010316] ACPI: Sleep Button [SLPB]
[    1.011468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.011508] ACPI: Power Button [PWRF]
[    1.020885] Marking TSC unstable due to TSC halts in idle
[    1.025822] Switching to clocksource acpi_pm
[    1.026682] processor LNXCPU:00: registered as cooling_device0
[    1.062059] isapnp: Scanning for PnP cards...
[    1.174444] ACPI: Battery Slot [BAT0] (battery present)
[    1.190836] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.192613] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.197880] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.206294] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.207449] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.210672] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
[    1.210706] PCI: setting IRQ 5 as level-triggered
[    1.210731] serial 0000:00:03.0: PCI INT A -> Link[LNK7] -> GSI 5 (level, low) -> IRQ 5
[    1.210794] serial 0000:00:03.0: PCI INT A disabled
[    1.299659] brd: module loaded
[    1.312492] loop: module loaded
[    1.314295] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.321726] pata_acpi 0000:00:0f.0: can't derive routing for PCI INT A
[    1.323973] pata_acpi 0000:00:0f.0: can't derive routing for PCI INT A
[    1.332564] Fixed MDIO Bus: probed
[    1.337145] PPP generic driver version 2.4.2
[    1.337558] tun: Universal TUN/TAP device driver, 1.6
[    1.337573] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.338541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.346185] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
[    1.346223] PCI: setting IRQ 11 as level-triggered
[    1.346251] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNK4] -> GSI 11 (level, low) -> IRQ 11
[    1.346696] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[    1.347406] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[    1.408211] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xe8018c00
[    1.420535] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[    1.422755] usb usb1: configuration #1 chosen from 1 choice
[    1.423680] hub 1-0:1.0: USB hub found
[    1.423863] hub 1-0:1.0: 5 ports detected
[    1.439566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.439782] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[    1.439978] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    1.441167] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[    1.441496] ohci_hcd 0000:00:0b.0: irq 7, io mem 0xe8016000
[    1.569725] usb usb2: configuration #1 chosen from 1 choice
[    1.570560] hub 2-0:1.0: USB hub found
[    1.570700] hub 2-0:1.0: 3 ports detected
[    1.577635] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
[    1.577673] PCI: setting IRQ 10 as level-triggered
[    1.577698] ohci_hcd 0000:00:0b.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10
[    1.577914] ohci_hcd 0000:00:0b.1: OHCI Host Controller
[    1.579388] ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
[    1.579583] ohci_hcd 0000:00:0b.1: irq 10, io mem 0xe8017000
[    1.694429] usb usb3: configuration #1 chosen from 1 choice
[    1.695109] hub 3-0:1.0: USB hub found
[    1.695237] hub 3-0:1.0: 2 ports detected
[    1.701551] uhci_hcd: USB Universal Host Controller Interface driver
[    1.702355] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.709099] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.711143] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.711235] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.717422] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.717717] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.717863] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.719062] mice: PS/2 mouse device common for all mice
[    1.720847] rtc_cmos 00:02: RTC can wake from S4
[    1.721445] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.721818] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    1.722283] device-mapper: uevent: version 1.0.3
[    1.725232] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.773236] device-mapper: multipath: version 1.1.0 loaded
[    1.773277] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.777618] EISA: Probing bus 0 at eisa.0
[    1.777814] Cannot allocate resource for EISA slot 1
[    1.777833] Cannot allocate resource for EISA slot 2
[    1.778741] Cannot allocate resource for EISA slot 8
[    1.778759] EISA: Detected 0 cards.
[    1.780837] cpuidle: using governor ladder
[    1.781442] cpuidle: using governor menu
[    1.790852] TCP cubic registered
[    1.791812] NET: Registered protocol family 10
[    1.793219] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.805699] lo: Disabled Privacy Extensions
[    1.807895] NET: Registered protocol family 17
[    1.813785] Using IPI No-Shortcut mode
[    1.814562] PM: Resume from disk failed.
[    1.814717] registered taskstats version 1
[    1.828947]   Magic number: 4:0:0
[    1.829977] rtc_cmos 00:02: setting system clock to 2004-01-01 00:01:07 UTC (1072915267)
[    1.830006] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.830015] EDD information not available.
[    1.981886] isapnp: No Plug & Play device found
[    2.092655] usb 3-1: new low speed USB device using ohci_hcd and address 2
[    2.289659] Freeing initrd memory: 7775k freed
[    2.317504] Freeing unused kernel memory: 656k freed
[    2.322996] Write protecting the kernel text: 4676k
[    2.323176] Write protecting the kernel read-only data: 1840k
[    2.326682] usb 3-1: configuration #1 chosen from 1 choice
[    2.996517] udev: starting version 151
[    5.496870] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A
[    5.497970] scsi0 : pata_ali
[    5.499289] scsi1 : pata_ali
[    5.503825] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[    5.503862] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[    5.532499] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.532673] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    5.548605] ohci1394 0000:00:0c.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10
[    5.605676] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[e8018000-e80187ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.673301] ata1.00: ATA-6: TOSHIBA MK4025GAS, KA100A, max UDMA/100
[    5.673367] ata1.00: 78140160 sectors, multi 16: LBA 
[    5.688876] ata1.00: configured for UDMA/100
[    5.696626] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4025GA KA10 PQ: 0 ANSI: 5
[    5.701444] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.707900] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    5.715213] sd 0:0:0:0: [sda] Write Protect is off
[    5.715248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.718027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.758964]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    5.887603] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.938148] 8139too Fast Ethernet driver 0.9.28
[    5.938630] 8139too 0000:00:0a.0: PCI INT A -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10
[    5.944045] eth0: RealTek RTL8139 at 0x1c00, 00:09:5d:04:97:dd, IRQ 10
[    5.969455] usbcore: registered new interface driver hiddev
[    5.982944] input: HID 04b3:3107 as /devices/pci0000:00/0000:00:0b.1/usb3/3-1/3-1:1.0/input/input6
[    5.988785] generic-usb 0003:04B3:3107.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:3107] on usb-0000:00:0b.1-1/input0
[    5.989005] usbcore: registered new interface driver usbhid
[    5.989660] usbhid: v2.6:USB HID core driver
[    6.902952] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08002856000497dd]
[    7.340692] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    7.340749] EXT4-fs (sda5): write access will be enabled during recovery
[    8.759684] EXT4-fs (sda5): orphan cleanup on readonly fs
[    8.760319] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 402306
[    8.768623] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 397087
[    8.786210] EXT4-fs (sda5): 2 orphan inodes deleted
[    8.786281] EXT4-fs (sda5): recovery complete
[    9.077041] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   21.770271] Adding 462840k swap on /dev/sda6.  Priority:-1 extents:1 across:462840k 
[   22.351671] udev: starting version 151
[   24.272848] Linux agpgart interface v0.103
[   25.902558] psmouse serio2: ID: 10 00 64
[   26.055798] lp: driver loaded but no devices found
[   26.770480] [drm] Initialized drm 1.1.0 20060810
[   26.875490] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[   26.876660] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   26.990823] yenta_cardbus 0000:00:0c.0: CardBus bridge found [5678:1234]
[   26.990927] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI
[   26.990940] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI
[   26.990960] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01771b22, devctl 0x44
[   27.128632] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input8
[   27.222792] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0000, PCI irq 7
[   27.222822] yenta_cardbus 0000:00:0c.0: Socket status: 30000086
[   27.788622] [drm] radeon defaulting to kernel modesetting.
[   27.788651] [drm] radeon kernel modesetting enabled.
[   27.789004] radeon 0000:00:09.0: power state changed by ACPI to D0
[   27.790142] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
[   27.790187] radeon 0000:00:09.0: PCI INT A -> Link[LNK1] -> GSI 7 (level, low) -> IRQ 7
[   27.887489] [drm] radeon: Initializing kernel modesetting.
[   27.893263] [drm] register mmio base: 0xE8000000
[   27.893293] [drm] register mmio size: 65536
[   27.894866] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[   27.895020] [drm] radeon: VRAM 64M
[   27.895030] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[   27.895040] [drm] radeon: GTT 512M
[   27.895048] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[   27.895270] [drm] radeon: irq initialized.
[   27.895298] [drm] Detected VRAM RAM=64M, BAR=128M
[   27.895309] [drm] RAM width 32bits DDR
[   27.906934] [TTM] Zone  kernel: Available graphics memory: 242478 kiB.
[   27.907826] [drm] radeon: 16M of VRAM memory ready
[   27.907979] [drm] radeon: 512M of GTT memory ready.
[   27.918737] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   28.004271] [drm] radeon: cp idle (0x00008080)
[   28.004831] [drm] Loading R100 Microcode
[   28.006494] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[   28.082216] type=1505 audit(1072908093.750:2):  operation="profile_load" pid=513 name="/sbin/dhclient3"
[   28.084544] type=1505 audit(1072908093.754:3):  operation="profile_load" pid=513 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   28.111851] [drm] radeon: ring at 0x0000000020000000
[   28.112365] [drm] ring test succeeded in 0 usecs
[   28.137445] [drm] radeon: ib pool ready.
[   28.138132] [drm] ib test succeeded in 0 usecs
[   28.141398] type=1505 audit(1072908093.810:4):  operation="profile_load" pid=513 name="/usr/lib/connman/scripts/dhclient-script"
[   28.167024] [drm] DFP table revision: 2
[   28.183886] [drm] Panel ID String: Toshiba LTM07C382  XSGA 
[   28.183918] [drm] Panel Size 1024x600
[   28.198743] [drm] Default TV standard: NTSC
[   28.198774] [drm] 27.000000000 MHz TV ref clk
[   28.198787] [drm] No TV DAC info found in BIOS
[   28.198921] [drm] Default TV standard: NTSC
[   28.198933] [drm] 27.000000000 MHz TV ref clk
[   28.200290] [drm] Radeon Display Connectors
[   28.200313] [drm] Connector 0:
[   28.200322] [drm]   VGA
[   28.200335] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   28.200344] [drm]   Encoders:
[   28.200351] [drm]     CRT1: INTERNAL_DAC1
[   28.200366] [drm] Connector 1:
[   28.200371] [drm]   DVI-D
[   28.200377] [drm]   HPD1
[   28.200387] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   28.200394] [drm]   Encoders:
[   28.200401] [drm]     DFP1: INTERNAL_TMDS1
[   28.200411] [drm] Connector 2:
[   28.200417] [drm]   LVDS
[   28.200422] [drm]   Encoders:
[   28.200430] [drm]     LCD1: INTERNAL_LVDS
[   28.200440] [drm] Connector 3:
[   28.200445] [drm]   S-video
[   28.200451] [drm]   Encoders:
[   28.200609] [drm]     TV1: INTERNAL_DAC2
[   28.659625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   28.694261] [drm] fb mappable at 0xF0040000
[   28.694290] [drm] vram apper at 0xF0000000
[   28.694298] [drm] size 614400
[   28.694305] [drm] fb depth is 8
[   28.694312] [drm]    pitch is 1024
[   28.703125]  clean.
[   28.750281] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   28.754526] fb0: radeondrmfb frame buffer device
[   28.754550] registered panic notifier
[   28.754621] [drm] Initialized radeon 2.0.0 20080528 for 0000:00:09.0 on minor 0
[   28.764263]  clean.
[   28.774454] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   28.810943] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   28.918545] vga16fb: initializing
[   28.918605] vga16fb: mapped to 0xc00a0000
[   28.918696] vga16fb: not registering due to another framebuffer present
[   28.998862] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   29.635355] Console: switching to colour frame buffer device 128x37
[   30.176969] ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 5
[   30.177024] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK8] -> GSI 5 (level, low) -> IRQ 5
[   33.189083] AC'97 1 does not respond - RESET
[   33.204175] AC'97 1 access is not valid [0xffffffff], removing mixer.
[   33.204354] ali mixer 1 creating error.
[   66.609464] EXT4-fs (sda5): warning: mounting fs with errors, running e2fsck is recommended
[   68.936564] type=1505 audit(1072908134.606:5):  operation="profile_load" pid=665 name="/usr/share/gdm/guest-session/Xsession"
[   69.073098] type=1505 audit(1072908134.742:6):  operation="profile_replace" pid=666 name="/sbin/dhclient3"
[   69.074652] type=1505 audit(1072908134.742:7):  operation="profile_replace" pid=666 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   69.076872] type=1505 audit(1072908134.742:8):  operation="profile_replace" pid=666 name="/usr/lib/connman/scripts/dhclient-script"
[   69.184804] type=1505 audit(1072908134.854:9):  operation="profile_load" pid=669 name="/usr/bin/evince"
[   69.227711] type=1505 audit(1072908134.894:10):  operation="profile_load" pid=669 name="/usr/bin/evince-previewer"
[   69.273812] type=1505 audit(1072908134.942:11):  operation="profile_load" pid=669 name="/usr/bin/evince-thumbnailer"
[   69.511185] type=1505 audit(1072908135.178:12):  operation="profile_load" pid=679 name="/usr/lib/cups/backend/cups-pdf"
[   69.529033] type=1505 audit(1072908135.198:13):  operation="profile_load" pid=679 name="/usr/sbin/cupsd"
[   69.604221] type=1505 audit(1072908135.270:14):  operation="profile_load" pid=680 name="/usr/sbin/tcpdump"
[   75.395310] ppdev: user-space parallel port driver
[  161.060469] usb 2-3: new full speed USB device using ohci_hcd and address 2
[  161.448667] usb 2-3: configuration #1 chosen from 1 choice
[  164.035925] prism2_usb: module is from the staging directory, the quality is unknown, you have been warned.
[  164.429900] prism2_usb: Checking for firmware prism2_ru.fw
[  164.430158] usb 2-3: firmware: requesting prism2_ru.fw
[  164.748195] prism2_usb: Firmware not available, but not essential
[  164.748284] prism2_usb: can continue to use card anyway.
[  165.320803] Received frame on unsupported port=4
[  166.208811] ident: nic h/w: id=0x8026 1.0.0
[  166.211316] ident: pri f/w: id=0x15 1.1.4
[  166.216524] ident: sta f/w: id=0x1f 1.8.3
[  166.218194] MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
[  166.220197] CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
[  166.223935] PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4
[  166.244545] STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/15
[  166.245951] PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[  166.252356] STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
[  166.272414] STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
[  166.283437] Prism2 card SN: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
[  166.512707] usbcore: registered new interface driver prism2_usb
[  169.370962] linkstatus=DISCONNECTED (unhandled)

yiannis@flybook:~$ uname-r
uname-r: command not found
yiannis@flybook:~$ uname
Linux
yiannis@flybook:~$ uname -r
2.6.32-21-generic
yiannis@flybook:~$

[jayd512]

Okay.
What about the output from the other commands mentioned in the page that I linked you to?

lspci -knn
lsusb
lsmod
ifconfig

[ibbos]

Okay.
What about the output from the other commands mentioned in the page that I linked you to?

lspci -knn
lsusb
lsmod
ifconfig

these are the attached
com1.txtcom2.txt

[jayd512]

Looks like your adapter is detected, and firmware is loading:

Bus 002 Device 002: ID 124a:168b AirVast PRISM3 WLAN Adapter
prism2_usb            161479  0 
wlan0     Link encap:Ethernet  HWaddr 00:0a:e9:10:40:42  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Is the adapter enabled in Network Manager?
Are you able to detect any wireless networks?

iwlist wlan0 scan