Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Like Tree1Likes
I have an Acer One D270-1824 (From Wally World) I installed Kubuntu/KDE3/Lucid (AKA:Trinity Lucid Lynx [Kubuntu 10.04]) Everything works Great - Except the Wireless LAN. I've had no luck at ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Nov 2009
    Location
    FL
    Posts
    12

    Wireless Driver for Acer One (D270)


    I have an Acer One D270-1824 (From Wally World)
    I installed Kubuntu/KDE3/Lucid (AKA:Trinity Lucid Lynx [Kubuntu 10.04])

    Everything works Great - Except the Wireless LAN.
    I've had no luck at all tracking down and installing the wireless driver.

    Tried:
    A number of solutions including:
    ath9k

    Wifix Produced:
    please copy and paste the following information into an e-mail to :

    20120901111658
    Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
    Broadcom Corporation Device [14e4:4727] (rev 01)
    1d6b:0001
    1d6b:0001
    1d6b:0001
    046d:c505
    0461:4d04
    1d6b:0001
    064e:d250
    1d6b:0002
    Not having any luck.
    Any Ideas/Suggestions would be appreciated.

    Thanks...

  2. #2
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    http://www.linuxforums.org/forum/wir...tart-here.html

    Start there and post your results here.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  3. #3
    Just Joined!
    Join Date
    Nov 2009
    Location
    FL
    Posts
    12
    Thanks for the fast responce...
    Really appreciate it...

    Code:
    00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0bf1] (rev 03)
    00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0be1] (rev 09)
    00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
            Kernel driver in use: HDA Intel
            Kernel modules: snd-hda-intel
    00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
            Kernel driver in use: uhci_hcd
    00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
            Kernel driver in use: uhci_hcd
    00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
            Kernel driver in use: uhci_hcd
    00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
            Kernel driver in use: uhci_hcd
    00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
            Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
    00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
    00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
            Kernel driver in use: ahci
            Kernel modules: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
            Kernel modules: i2c-i801
    01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
            Kernel driver in use: r8169
            Kernel modules: r8169
    02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01)
            Kernel modules: wl
    03:00.0 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)

    lsmod
    Code:
    Module                  Size  Used by
    binfmt_misc             6587  1
    ppdev                   5259  0
    dm_crypt               11331  0
    joydev                  8740  0
    snd_hda_codec_realtek   203472  1
    snd_hda_intel          22165  3
    snd_hda_codec          74297  2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep               5412  1 snd_hda_codec
    snd_pcm_oss            35308  0
    snd_mixer_oss          13746  2 snd_pcm_oss
    snd_pcm                70918  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_seq_dummy           1338  0
    snd_seq_oss            26722  0
    snd_seq_midi            4557  0
    snd_rawmidi            19056  1 snd_seq_midi
    snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
    snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer              19130  2 snd_pcm,snd_seq
    snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    led_class               2864  0
    uvcvideo               57470  0
    videodev               34457  1 uvcvideo
    snd                    54244  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    v4l1_compat            13251  2 uvcvideo,videodev
    psmouse                63677  0
    serio_raw               3978  0
    soundcore               6620  2 snd
    snd_page_alloc          7172  2 snd_hda_intel,snd_pcm
    lp                      7028  0
    parport                32635  2 ppdev,lp
    dm_raid45              81647  0
    xor                    15028  1 dm_raid45
    usbhid                 36206  0
    fbcon                  35102  72
    tileblit                1999  1 fbcon
    font                    7557  1 fbcon
    bitblit                 4707  1 fbcon
    hid                    67288  1 usbhid
    softcursor              1189  1 bitblit
    ahci                   32712  2
    video                  17375  0
    r8169                  34396  0
    output                  1871  1 video
    mii                     4381  1 r8169
    vga16fb                11385  1
    vgastate                8961  1 vga16fb
    ramzswap                6362  1
    xvmalloc                4074  1 ramzswap
    lzo_decompress          2189  1 ramzswap
    lzo_compress            1853  1 ramzswap

    dmesg
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-42-generic-pae (buildd@aatxe) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #95-Ubuntu SMP Wed Jul 25 16:13:09 UTC 2012 (Ubuntu 2.6.32-42.95-generic-pae 2.6.32.59+drm33.24)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f4af000 (usable)
    [    0.000000]  BIOS-e820: 000000003f4af000 - 000000003f5af000 (reserved)
    [    0.000000]  BIOS-e820: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000003f6af000 - 000000003f6ef000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000003f6ef000 - 000000003f6f0000 (usable)
    [    0.000000]  BIOS-e820: 000000003f6f0000 - 0000000040000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.7 present.
    [    0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
    [    0.000000]   1 base 000000000 mask FE0000000 write-back
    [    0.000000]   2 base 020000000 mask FE0000000 write-back
    [    0.000000]   3 base 03F800000 mask FFF800000 uncachable
    [    0.000000]   4 disabled
    [    0.000000]   5 base 03F6F0000 mask FFFFF0000 uncachable
    [    0.000000]   6 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 000000000009e800 (usable)
    [    0.000000]  modified: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000003f4af000 (usable)
    [    0.000000]  modified: 000000003f4af000 - 000000003f5af000 (reserved)
    [    0.000000]  modified: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
    [    0.000000]  modified: 000000003f6af000 - 000000003f6ef000 (ACPI data)
    [    0.000000]  modified: 000000003f6ef000 - 000000003f6f0000 (usable)
    [    0.000000]  modified: 000000003f6f0000 - 0000000040000000 (reserved)
    [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00e00000
    [    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037800000 page 2M
    [    0.000000]  0037800000 - 00379fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
    [    0.000000] RAMDISK: 2eaa5000 - 2f7c2acc
    [    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    [    0.000000] ACPI: XSDT 3f6ee120 0008C (v01 ACRSYS ACRPRDCT 00000001      01000013)
    [    0.000000] ACPI: FACP 3f6ed000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: DSDT 3f6e1000 0786E (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
    [    0.000000] ACPI: FACS 3f675000 00040
    [    0.000000] ACPI: HPET 3f6ec000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: APIC 3f6eb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: MCFG 3f6ea000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: WDRT 3f6e9000 00047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
    [    0.000000] ACPI: SLIC 3f6e0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: BOOT 3f6df000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: MSDM 3f6de000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: FPDT 3f6dc000 00090 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: SSDT 3f6db000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [    0.000000] ACPI: SSDT 3f6da000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [    0.000000] ACPI: SSDT 3f6d9000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [    0.000000] ACPI: WDAT 3f6d8000 00194 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 124MB HIGHMEM available.
    [    0.000000] 889MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 379fe000
    [    0.000000]   low ram: 0 - 379fe000
    [    0.000000]   node 0 low ram: 00000000 - 379fe000
    [    0.000000]   node 0 bootmap 00009000 - 0000ff40
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 000093e818]    TEXT DATA BSS ==> [0000100000 - 000093e818]
    [    0.000000]   #4 [002eaa5000 - 002f7c2acc]          RAMDISK ==> [002eaa5000 - 002f7c2acc]
    [    0.000000]   #5 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
    [    0.000000]   #6 [000093f000 - 00009462b0]              BRK ==> [000093f000 - 00009462b0]
    [    0.000000]   #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
    [    0.000000]   #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
    [    0.000000] found SMP MP-table at [c00fe260] fe260
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000379fe
    [    0.000000]   HighMem  0x000379fe -> 0x0003f6f0
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[4] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x0003f4af
    [    0.000000]     0: 0x0003f6ef -> 0x0003f6f0
    [    0.000000] On node 0 totalpages: 259146
    [    0.000000] free_area_init_node: node 0, pgdat c07df020, node_mem_map c1001000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3962 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1748 pages used for memmap
    [    0.000000]   Normal zone: 221994 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 250 pages used for memmap
    [    0.000000]   HighMem zone: 31160 pages, LIFO batch:7
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x408
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 15 pages/cpu @c1800000 s39480 r0 d21960 u524288
    [    0.000000] pcpu-alloc: s39480 r0 d21960 u524288 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257116
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-42-generic-pae root=UUID=fa197c61-c35b-4c51-9631-c19a613d5150 ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 5196480 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000379fe:0003f6f0)
    [    0.000000] Memory: 999648k/1039296k available (4852k kernel code, 36200k reserved, 2225k data, 680k init, 125640k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
    [    0.000000]       .init : 0xc07ea000 - 0xc0894000   ( 680 kB)
    [    0.000000]       .data : 0xc05bd1ef - 0xc07e99c8   (2225 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc05bd1ef   (4852 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:440
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.004000] Detected 1595.940 MHz processor.
    [    0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.88 BogoMIPS (lpj=6383760)
    [    0.000043] Security Framework initialized
    [    0.000083] AppArmor: AppArmor initialized
    [    0.000100] Mount-cache hash table entries: 512
    [    0.000344] Initializing cgroup subsys ns
    [    0.000353] Initializing cgroup subsys cpuacct
    [    0.000363] Initializing cgroup subsys memory
    [    0.000377] Initializing cgroup subsys devices
    [    0.000384] Initializing cgroup subsys freezer
    [    0.000389] Initializing cgroup subsys net_cls
    [    0.000428] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.000435] CPU: L2 cache: 512K
    [    0.000441] CPU: Physical Processor ID: 0
    [    0.000445] CPU: Processor Core ID: 0
    [    0.000452] mce: CPU supports 5 MCE banks
    [    0.000464] CPU0: Thermal monitoring handled by SMI
    [    0.000472] using mwait in idle threads.
    [    0.000484] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
    [    0.000497] ... version:                3
    [    0.000501] ... bit width:              40
    [    0.000506] ... generic registers:      2
    [    0.000511] ... value mask:             000000ffffffffff
    [    0.000516] ... max period:             000000007fffffff
    [    0.000521] ... fixed-purpose events:   3
    [    0.000526] ... event mask:             0000000700000003
    [    0.000535] Checking 'hlt' instruction... OK.
    [    0.017205] ACPI: Core revision 20090903
    [    0.063995] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.064006] ftrace: allocating 22472 entries in 44 pages
    [    0.072534] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.072994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.112645] CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.220836] Booting processor 1 APIC 0x1 ip 0x6000
    [    0.230869] Initializing CPU#1
    [    0.308421] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.308427] CPU: L2 cache: 512K
    [    0.308433] CPU: Physical Processor ID: 0
    [    0.308437] CPU: Processor Core ID: 0
    [    0.308452] CPU1: Thermal monitoring handled by SMI
    [    0.308463] CPU1: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.308480] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.328675] Booting processor 2 APIC 0x2 ip 0x6000
    [    0.338631] Initializing CPU#2
    [    0.416316] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.416322] CPU: L2 cache: 512K
    [    0.416326] CPU: Physical Processor ID: 0
    [    0.416329] CPU: Processor Core ID: 1
    [    0.416342] CPU2: Thermal monitoring handled by SMI
    [    0.416367] CPU2: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.416382] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    [    0.436533] Booting processor 3 APIC 0x3 ip 0x6000
    [    0.446490] Initializing CPU#3
    [    0.524212] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.524217] CPU: L2 cache: 512K
    [    0.524221] CPU: Physical Processor ID: 0
    [    0.524225] CPU: Processor Core ID: 1
    [    0.524237] CPU3: Thermal monitoring handled by SMI
    [    0.524322] CPU3: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.524336] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    [    0.544350] Brought up 4 CPUs
    [    0.544356] Total of 4 processors activated (12767.84 BogoMIPS).
    [    0.544916] CPU0 attaching sched-domain:
    [    0.544925]  domain 0: span 0-1 level SIBLING
    [    0.544931]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [    0.544944]   domain 1: span 0-1 level MC
    [    0.544949]    groups: 0-1 (cpu_power = 1178)
    [    0.544958]    domain 2: span 0-3 level CPU
    [    0.544964]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [    0.544980] CPU1 attaching sched-domain:
    [    0.544985]  domain 0: span 0-1 level SIBLING
    [    0.544990]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [    0.545002]   domain 1: span 0-1 level MC
    [    0.545007]    groups: 0-1 (cpu_power = 1178)
    [    0.545016]    domain 2: span 0-3 level CPU
    [    0.545021]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [    0.545034] CPU2 attaching sched-domain:
    [    0.545039]  domain 0: span 2-3 level SIBLING
    [    0.545044]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [    0.545055]   domain 1: span 2-3 level MC
    [    0.545060]    groups: 2-3 (cpu_power = 1178)
    [    0.545069]    domain 2: span 0-3 level CPU
    [    0.545074]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [    0.545088] CPU3 attaching sched-domain:
    [    0.545092]  domain 0: span 2-3 level SIBLING
    [    0.545097]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [    0.545109]   domain 1: span 2-3 level MC
    [    0.545114]    groups: 2-3 (cpu_power = 1178)
    [    0.545123]    domain 2: span 0-3 level CPU
    [    0.545128]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [    0.546048] devtmpfs: initialized
    [    0.547004] regulator: core version 0.5
    [    0.547048] Time: 19:01:49  Date: 08/30/12
    [    0.547147] NET: Registered protocol family 16
    [    0.547402] Trying to unpack rootfs image as initramfs...
    [    0.547420] EISA bus registered
    [    0.547439] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.547445] ACPI: bus type pci registered
    [    0.547576] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.547583] PCI: MCFG area at e0000000 reserved in E820
    [    0.547587] PCI: Using MMCONFIG for extended config space
    [    0.547592] PCI: Using configuration type 1 for base access
    [    0.549885] bio: create slab <bio-0> at 0
    [    0.551955] ACPI: EC: Look up EC in DSDT
    [    0.554091] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.560057] ACPI: BIOS _OSI(Linux) query ignored
    [    0.571146] ACPI: Interpreter enabled
    [    0.571154] ACPI: (supports S0 S3 S4 S5)
    [    0.571207] ACPI: Using IOAPIC for interrupt routing
    [    0.584650] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [    0.585221] ACPI: No dock devices found.
    [    0.586080] _OSC invalid UUID
    [    0.586087] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.586241] pci 0000:00:02.0: reg 10 32bit mmio: [0x46000000-0x460fffff]
    [    0.586251] pci 0000:00:02.0: reg 14 io port: [0x50d0-0x50d7]
    [    0.586423] pci 0000:00:1b.0: reg 10 64bit mmio: [0x46100000-0x46103fff]
    [    0.586548] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.586558] pci 0000:00:1b.0: PME# disabled
    [    0.586733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.586742] pci 0000:00:1c.0: PME# disabled
    [    0.586920] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.586929] pci 0000:00:1c.1: PME# disabled
    [    0.587106] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.587114] pci 0000:00:1c.2: PME# disabled
    [    0.587217] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
    [    0.587321] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
    [    0.587424] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
    [    0.587528] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
    [    0.587636] pci 0000:00:1d.7: reg 10 32bit mmio: [0x46105000-0x461053ff]
    [    0.587755] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.587764] pci 0000:00:1d.7: PME# disabled
    [    0.588123] pci 0000:00:1f.2: reg 10 io port: [0x50c8-0x50cf]
    [    0.588137] pci 0000:00:1f.2: reg 14 io port: [0x50dc-0x50df]
    [    0.588169] pci 0000:00:1f.2: reg 18 io port: [0x50c0-0x50c7]
    [    0.588183] pci 0000:00:1f.2: reg 1c io port: [0x50d8-0x50db]
    [    0.588197] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f]
    [    0.588211] pci 0000:00:1f.2: reg 24 32bit mmio: [0x46104000-0x461043ff]
    [    0.588293] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.588303] pci 0000:00:1f.2: PME# disabled
    [    0.588384] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
    [    0.588622] pci 0000:01:00.0: reg 10 io port: [0x4000-0x40ff]
    [    0.588705] pci 0000:01:00.0: reg 18 64bit mmio pref: [0x40004000-0x40004fff]
    [    0.588765] pci 0000:01:00.0: reg 20 64bit mmio pref: [0x40000000-0x40003fff]
    [    0.589084] pci 0000:01:00.0: supports D1 D2
    [    0.589090] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.589108] pci 0000:01:00.0: PME# disabled
    [    0.589297] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
    [    0.589307] pci 0000:00:1c.0: bridge 32bit mmio: [0x45000000-0x45ffffff]
    [    0.589322] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x40000000-0x40ffffff]
    [    0.589419] pci 0000:02:00.0: reg 10 64bit mmio: [0x44000000-0x44003fff]
    [    0.589566] pci 0000:02:00.0: supports D1 D2
    [    0.589571] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    0.589580] pci 0000:02:00.0: PME# disabled
    [    0.589692] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    [    0.589701] pci 0000:00:1c.1: bridge 32bit mmio: [0x44000000-0x44ffffff]
    [    0.589715] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x41000000-0x41ffffff]
    [    0.589916] pci 0000:03:00.0: reg 10 32bit mmio: [0x43001000-0x43001fff]
    [    0.590343] pci 0000:03:00.0: supports D1 D2
    [    0.590348] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    [    0.590366] pci 0000:03:00.0: PME# disabled
    [    0.590525] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
    [    0.590534] pci 0000:00:1c.2: bridge 32bit mmio: [0x43000000-0x43ffffff]
    [    0.590548] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x42000000-0x42ffffff]
    [    0.590634] pci 0000:00:1e.0: transparent bridge
    [    0.590691] pci_bus 0000:00: on NUMA node 0
    [    0.590703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.591049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [    0.591190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [    0.591328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [    0.591648] _OSC invalid UUID
    [    0.606350] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [    0.606579] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.606811] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [    0.607041] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.607266] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [    0.607501] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [    0.607725] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [    0.607948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [    0.608204] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.608232] vgaarb: loaded
    [    0.608477] SCSI subsystem initialized
    [    0.608772] libata version 3.00 loaded.
    [    0.608965] usbcore: registered new interface driver usbfs
    [    0.609000] usbcore: registered new interface driver hub
    [    0.609071] usbcore: registered new device driver usb
    [    0.609442] ACPI: WMI: Mapper loaded
    [    0.609447] PCI: Using ACPI for IRQ routing
    [    0.609788] NetLabel: Initializing
    [    0.609793] NetLabel:  domain hash size = 128
    [    0.609796] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.609820] NetLabel:  unlabeled traffic allowed by default
    [    0.609916] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.609928] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.611965] Switching to clocksource tsc
    [    0.618486] AppArmor: AppArmor Filesystem Enabled
    [    0.618533] pnp: PnP ACPI init
    [    0.618576] ACPI: bus type pnp registered
    [    0.622954] pnp: PnP ACPI: found 11 devices
    [    0.622963] ACPI: ACPI bus type pnp unregistered
    [    0.622972] PnPBIOS: Disabled by ACPI PNP
    [    0.623015] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    [    0.623043] system 00:07: ioport range 0x680-0x69f has been reserved
    [    0.623056] system 00:07: ioport range 0x1000-0x1003 has been reserved
    [    0.623067] system 00:07: ioport range 0x1010-0x101f has been reserved
    [    0.623077] system 00:07: ioport range 0x1004-0x1007 has been reserved
    [    0.623087] system 00:07: ioport range 0x400-0x47f has been reserved
    [    0.623097] system 00:07: ioport range 0x500-0x57f has been reserved
    [    0.623106] system 00:07: ioport range 0x600-0x61f has been reserved
    [    0.623126] system 00:08: ioport range 0x6a0-0x6af has been reserved
    [    0.623136] system 00:08: ioport range 0x6b0-0x6ff has been reserved
    [    0.623156] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [    0.623167] system 00:0a: iomem range 0x0-0x3fff could not be reserved
    [    0.623176] system 00:0a: iomem range 0x0-0xfff could not be reserved
    [    0.623186] system 00:0a: iomem range 0x0-0xfff could not be reserved
    [    0.623196] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
    [    0.658348] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    [    0.658357] pci 0000:00:1c.0:   IO window: 0x4000-0x4fff
    [    0.658370] pci 0000:00:1c.0:   MEM window: 0x45000000-0x45ffffff
    [    0.658381] pci 0000:00:1c.0:   PREFETCH window: 0x00000040000000-0x00000040ffffff
    [    0.658396] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    [    0.658404] pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
    [    0.658415] pci 0000:00:1c.1:   MEM window: 0x44000000-0x44ffffff
    [    0.658425] pci 0000:00:1c.1:   PREFETCH window: 0x00000041000000-0x00000041ffffff
    [    0.658440] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
    [    0.658447] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
    [    0.658459] pci 0000:00:1c.2:   MEM window: 0x43000000-0x43ffffff
    [    0.658469] pci 0000:00:1c.2:   PREFETCH window: 0x00000042000000-0x00000042ffffff
    [    0.658483] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
    [    0.658488] pci 0000:00:1e.0:   IO window: disabled
    [    0.658498] pci 0000:00:1e.0:   MEM window: disabled
    [    0.658507] pci 0000:00:1e.0:   PREFETCH window: disabled
    [    0.658541]   alloc irq_desc for 16 on node -1
    [    0.658546]   alloc kstat_irqs on node -1
    [    0.658559] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.658570] pci 0000:00:1c.0: setting latency timer to 64
    [    0.658589]   alloc irq_desc for 17 on node -1
    [    0.658594]   alloc kstat_irqs on node -1
    [    0.658602] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.658612] pci 0000:00:1c.1: setting latency timer to 64
    [    0.658630]   alloc irq_desc for 18 on node -1
    [    0.658634]   alloc kstat_irqs on node -1
    [    0.658642] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.658652] pci 0000:00:1c.2: setting latency timer to 64
    [    0.658666] pci 0000:00:1e.0: setting latency timer to 64
    [    0.658676] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.658683] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    [    0.658689] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
    [    0.658696] pci_bus 0000:01: resource 1 mem: [0x45000000-0x45ffffff]
    [    0.658702] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x40ffffff]
    [    0.658709] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
    [    0.658715] pci_bus 0000:02: resource 1 mem: [0x44000000-0x44ffffff]
    [    0.658721] pci_bus 0000:02: resource 2 pref mem [0x41000000-0x41ffffff]
    [    0.658727] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
    [    0.658733] pci_bus 0000:03: resource 1 mem: [0x43000000-0x43ffffff]
    [    0.658740] pci_bus 0000:03: resource 2 pref mem [0x42000000-0x42ffffff]
    [    0.658746] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
    [    0.658752] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
    [    0.658838] NET: Registered protocol family 2
    [    0.659045] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.659699] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.660710] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.661161] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.661168] TCP reno registered
    [    0.661399] NET: Registered protocol family 1
    [    0.661444] pci 0000:00:02.0: Boot video device
    [    0.661479] pci 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.661509] pci 0000:00:1d.0: PCI INT A disabled
    [    0.661525]   alloc irq_desc for 19 on node -1
    [    0.661530]   alloc kstat_irqs on node -1
    [    0.661543] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.661571] pci 0000:00:1d.1: PCI INT B disabled
    [    0.661585] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.661613] pci 0000:00:1d.2: PCI INT C disabled
    [    0.661627] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    0.661654] pci 0000:00:1d.3: PCI INT D disabled
    [    0.661675] pci 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.191831] Freeing initrd memory: 13430k freed
    [    2.267248] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [    2.267385] pci 0000:00:1d.7: PCI INT A disabled
    [    2.267455] Simple Boot Flag at 0x44 set to 0x1
    [    2.268023] cpufreq-nforce2: No nForce2 chipset.
    [    2.268085] Scanning for low memory corruption every 60 seconds
    [    2.268324] audit: initializing netlink socket (disabled)
    [    2.268345] type=2000 audit(1346353311.092:1): initialized
    [    2.286319] highmem bounce pool size: 64 pages
    [    2.286331] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    2.289968] VFS: Disk quotas dquot_6.5.2
    [    2.290106] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    2.291541] fuse init (API version 7.13)
    [    2.291751] msgmni has been set to 1734
    [    2.292577] alg: No test for stdrng (krng)
    [    2.292738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    2.292745] io scheduler noop registered
    [    2.292750] io scheduler anticipatory registered
    [    2.292755] io scheduler deadline registered
    [    2.292861] io scheduler cfq registered (default)
    [    2.293152]   alloc irq_desc for 24 on node -1
    [    2.293158]   alloc kstat_irqs on node -1
    [    2.293178] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    2.293197] pcieport 0000:00:1c.0: setting latency timer to 64
    [    2.293452]   alloc irq_desc for 25 on node -1
    [    2.293457]   alloc kstat_irqs on node -1
    [    2.293473] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    2.293491] pcieport 0000:00:1c.1: setting latency timer to 64
    [    2.293744]   alloc irq_desc for 26 on node -1
    [    2.293748]   alloc kstat_irqs on node -1
    [    2.293764] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
    [    2.293782] pcieport 0000:00:1c.2: setting latency timer to 64
    [    2.293970] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    2.294196] _OSC invalid UUID
    [    2.294388] _OSC invalid UUID
    [    2.294571] _OSC invalid UUID
    [    2.294791] _OSC invalid UUID
    [    2.294974] _OSC invalid UUID
    [    2.295156] _OSC invalid UUID
    [    2.295217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    2.295578] ACPI: AC Adapter [ACAD] (on-line)
    [    2.295778] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    2.295787] ACPI: Power Button [PWRB]
    [    2.295888] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [    2.295895] ACPI: Sleep Button [SLPB]
    [    2.295996] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    [    2.296109] ACPI: Lid Switch [LID]
    [    2.296210] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    2.296217] ACPI: Power Button [PWRF]
    [    2.297715] ACPI: SSDT 3f567a90 002E9 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
    [    2.298682] ACPI: SSDT 3f566710 006DB (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
    [    2.304051] Monitor-Mwait will be used to enter C-1 state
    [    2.304139] Monitor-Mwait will be used to enter C-2 state
    [    2.304243] processor LNXCPU:00: registered as cooling_device0
    [    2.305179] ACPI: SSDT 3f567e10 001CF (v01  PmRef    ApIst 00003000 INTL 20100121)
    [    2.305960] ACPI: SSDT 3f565f10 0008D (v01  PmRef    ApCst 00003000 INTL 20100121)
    [    2.308146] processor LNXCPU:01: registered as cooling_device1
    [    2.310773] processor LNXCPU:02: registered as cooling_device2
    [    2.313346] processor LNXCPU:03: registered as cooling_device3
    [    2.317994] thermal LNXTHERM:01: registered as thermal_zone0
    [    2.318012] ACPI: Thermal Zone [THRM] (40 C)
    [    2.318294] isapnp: Scanning for PnP cards...
    [    2.320468] ACPI: Battery Slot [BAT1] (battery present)
    [    2.322732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    2.326510] brd: module loaded
    [    2.327973] loop: module loaded
    [    2.328280] input: Macintosh mouse button emulation as /devices/virtual/input/input4
    [    2.329528] Fixed MDIO Bus: probed
    [    2.329630] PPP generic driver version 2.4.2
    [    2.329727] tun: Universal TUN/TAP device driver, 1.6
    [    2.329733] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    2.329975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.330021] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.330063] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    2.330072] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    2.330182] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    2.330233] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [    2.330256] ehci_hcd 0000:00:1d.7: debug port 1
    [    2.334159] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    2.334196] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x46105000
    [    2.351145] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    2.351390] usb usb1: configuration #1 chosen from 1 choice
    [    2.351456] hub 1-0:1.0: USB hub found
    [    2.351475] hub 1-0:1.0: 8 ports detected
    [    2.351620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.351664] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.351732] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.351752] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    2.351759] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    2.351843] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    2.351890] uhci_hcd 0000:00:1d.0: irq 17, io base 0x000050a0
    [    2.352087] usb usb2: configuration #1 chosen from 1 choice
    [    2.352154] hub 2-0:1.0: USB hub found
    [    2.352169] hub 2-0:1.0: 2 ports detected
    [    2.352262] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.352278] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    2.352285] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    2.352359] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    2.352416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
    [    2.352627] usb usb3: configuration #1 chosen from 1 choice
    [    2.352687] hub 3-0:1.0: USB hub found
    [    2.352702] hub 3-0:1.0: 2 ports detected
    [    2.352793] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.352809] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    2.352816] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    2.352892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    2.352947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
    [    2.353149] usb usb4: configuration #1 chosen from 1 choice
    [    2.353211] hub 4-0:1.0: USB hub found
    [    2.353225] hub 4-0:1.0: 2 ports detected
    [    2.353321] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    2.353337] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    2.353344] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    2.353426] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    2.353481] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005040
    [    2.353681] usb usb5: configuration #1 chosen from 1 choice
    [    2.353742] hub 5-0:1.0: USB hub found
    [    2.353759] hub 5-0:1.0: 2 ports detected
    [    2.353949] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    2.360156] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    2.363517] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.363534] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    2.363544] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    2.363554] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    2.363564] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    2.363787] mice: PS/2 mouse device common for all mice
    [    2.364135] rtc_cmos 00:09: RTC can wake from S4
    [    2.364222] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
    [    2.364270] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    2.364522] device-mapper: uevent: version 1.0.3
    [    2.364774] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    2.365018] device-mapper: multipath: version 1.1.0 loaded
    [    2.365025] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    2.365303] EISA: Probing bus 0 at eisa.0
    [    2.365315] Cannot allocate resource for EISA slot 1
    [    2.365321] Cannot allocate resource for EISA slot 2
    [    2.365326] Cannot allocate resource for EISA slot 3
    [    2.365331] Cannot allocate resource for EISA slot 4
    [    2.365336] Cannot allocate resource for EISA slot 5
    [    2.365360] EISA: Detected 0 cards.
    [    2.365924] cpuidle: using governor ladder
    [    2.366280] cpuidle: using governor menu
    [    2.367239] TCP cubic registered
    [    2.367654] NET: Registered protocol family 10
    [    2.369407] NET: Registered protocol family 17
    [    2.371999] Using IPI No-Shortcut mode
    [    2.372194] PM: Resume from disk failed.
    [    2.372218] registered taskstats version 1
    [    2.373063]   Magic number: 8:245:42
    [    2.373081] bdi 7:7: hash matches
    [    2.373200] rtc_cmos 00:09: setting system clock to 2012-08-30 19:01:51 UTC (1346353311)
    [    2.373208] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.373212] EDD information not available.
    [    2.385108] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
    [    2.672554] isapnp: No Plug & Play device found
    [    2.672633] Freeing unused kernel memory: 680k freed
    [    2.673234] Write protecting the kernel text: 4856k
    [    2.673378] Write protecting the kernel read-only data: 1888k
    [    2.722355] ramzswap: disk size set to 507244 kB
    [    2.733374] udev: starting version 151
    [    2.775349] usb 1-3: new high speed USB device using ehci_hcd and address 4
    [    2.775898] Adding 507240k swap on /dev/ramzswap0.  Priority:100 extents:1 across:507240k SS
    [    2.797862] vga16fb: initializing
    [    2.797873] vga16fb: mapped to 0xc00a0000
    [    2.798014] fb0: VGA16 VGA frame buffer device
    [    2.855962] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    2.856029] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.856183] r8169 0000:01:00.0: setting latency timer to 64
    [    2.856205] r8169 0000:01:00.0: unknown MAC, using family default
    [    2.856391]   alloc irq_desc for 27 on node -1
    [    2.856399]   alloc kstat_irqs on node -1
    [    2.856452] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
    [    2.858447] eth0: RTL8101e at 0xf842a000, 04:7d:7b:99:10:f2, XID 00a00000 IRQ 27
    [    2.893430] ahci 0000:00:1f.2: version 3.0
    [    2.893471] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.893572]   alloc irq_desc for 28 on node -1
    [    2.893580]   alloc kstat_irqs on node -1
    [    2.893606] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
    [    2.893689] ahci: SSS flag set, parallel bus scan disabled
    [    2.893760] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [    2.893773] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
    [    2.893788] ahci 0000:00:1f.2: setting latency timer to 64
    [    2.897944] scsi0 : ahci
    [    2.906192] scsi1 : ahci
    [    2.907271] scsi2 : ahci
    [    2.907552] scsi3 : ahci
    [    2.907720] ata1: SATA max UDMA/133 abar m1024@0x46104000 port 0x46104100 irq 28
    [    2.907733] ata2: SATA max UDMA/133 abar m1024@0x46104000 port 0x46104180 irq 28
    [    2.907741] ata3: DUMMY
    [    2.907746] ata4: DUMMY
    [    2.979046] usb 1-3: configuration #1 chosen from 1 choice
    [    3.219373] usb 2-1: new low speed USB device using uhci_hcd and address 2
    [    3.227395] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.228918] ata1.00: ATA-8: FUJITSU MJA2080BH G2, 00850019, max UDMA/100
    [    3.228942] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    3.230712] ata1.00: configured for UDMA/100
    [    3.246568] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MJA2080B 0085 PQ: 0 ANSI: 5
    [    3.247035] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    3.247074] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    3.247218] sd 0:0:0:0: [sda] Write Protect is off
    [    3.247226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    3.247295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.247669]  sda: sda1 sda2 < sda5 >
    [    3.315405] sd 0:0:0:0: [sda] Attached SCSI disk
    [    3.381244] usb 2-1: configuration #1 chosen from 1 choice
    [    3.566056] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.607767] usbcore: registered new interface driver hiddev
    [    3.622308] input: HID 0461:4d04 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
    [    3.622574] generic-usb 0003:0461:4D04.0001: input,hidraw0: USB HID v1.00 Mouse [HID 0461:4d04] on usb-0000:00:1d.0-1/input0
    [    3.622630] usbcore: registered new interface driver usbhid
    [    3.622637] usbhid: v2.6:USB HID core driver
    [    3.623815] usb 2-2: new low speed USB device using uhci_hcd and address 3
    [    3.705708] Console: switching to colour frame buffer device 80x30
    [    3.803857] usb 2-2: configuration #1 chosen from 1 choice
    [    3.821130] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input7
    [    3.821376] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
    [    3.854599] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8
    [    3.854931] generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
    [    4.202394] xor: automatically using best checksumming function: pIII_sse
    [    4.222294]    pIII_sse  :  4755.000 MB/sec
    [    4.222300] xor: using function: pIII_sse (4755.000 MB/sec)
    [    4.229351] device-mapper: dm-raid45: initialized v0.2594b
    [    4.432372] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [   17.622013] Adding 2969592k swap on /dev/sda5.  Priority:-1 extents:1 across:2969592k
    [   17.637228] udev: starting version 151
    [   17.756065] lp: driver loaded but no devices found
    [   18.032578] Linux video capture interface: v2.00
    [   18.063582] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d250)
    [   18.081280] acer-wmi: Acer Laptop ACPI-WMI Extras
    [   18.081309] acer-wmi: No or unsupported WMI interface, unable to load
    [   18.081466] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input9
    [   18.081665] usbcore: registered new interface driver uvcvideo
    [   18.081676] USB Video Class driver (v0.1.0)
    [   18.103923] type=1505 audit(1346353327.242:2):  operation="profile_load" pid=669 name="/sbin/dhclient3"
    [   18.108794] type=1505 audit(1346353327.250:3):  operation="profile_load" pid=669 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   18.109289] type=1505 audit(1346353327.250:4):  operation="profile_load" pid=669 name="/usr/lib/connman/scripts/dhclient-script"
    [   18.377651]   alloc irq_desc for 22 on node -1
    [   18.377661]   alloc kstat_irqs on node -1
    [   18.377682] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   18.377865] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   18.501707] type=1505 audit(1346353327.642:5):  operation="profile_load" pid=850 name="/usr/sbin/tcpdump"
    [   18.504720] type=1505 audit(1346353327.646:6):  operation="profile_load" pid=849 name="/usr/lib/cups/backend/cups-pdf"
    [   18.505889] type=1505 audit(1346353327.646:7):  operation="profile_load" pid=849 name="/usr/sbin/cupsd"
    [   18.506939] type=1505 audit(1346353327.646:8):  operation="profile_replace" pid=847 name="/sbin/dhclient3"
    [   18.507764] type=1505 audit(1346353327.646:9):  operation="profile_replace" pid=847 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   18.508325] type=1505 audit(1346353327.650:10):  operation="profile_replace" pid=847 name="/usr/lib/connman/scripts/dhclient-script"
    [   18.533003] hda_codec: ALC269: BIOS auto-probing.
    [   18.533667] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    [   18.605419] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    [   18.649670] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
    [   18.738683] r8169: eth0: link up
    [   18.738709] r8169: eth0: link up
    [   19.042772] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    [   24.285244] device eth0 entered promiscuous mode
    [   24.349133] device eth0 left promiscuous mode
    [   24.410033] device eth0 entered promiscuous mode
    [   24.635153] ppdev: user-space parallel port driver
    [   26.091532] CPU0 attaching NULL sched-domain.
    [   26.091546] CPU1 attaching NULL sched-domain.
    [   26.091552] CPU2 attaching NULL sched-domain.
    [   26.091557] CPU3 attaching NULL sched-domain.
    [   26.146670] CPU0 attaching sched-domain:
    [   26.146690]  domain 0: span 0-1 level SIBLING
    [   26.146706]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [   26.146741]   domain 1: span 0-1 level MC
    [   26.146755]    groups: 0-1 (cpu_power = 1178)
    [   26.146780]    domain 2: span 0-3 level CPU
    [   26.146794]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [   26.146834] CPU1 attaching sched-domain:
    [   26.146846]  domain 0: span 0-1 level SIBLING
    [   26.146861]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [   26.146892]   domain 1: span 0-1 level MC
    [   26.146906]    groups: 0-1 (cpu_power = 1178)
    [   26.146930]    domain 2: span 0-3 level CPU
    [   26.146943]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [   26.146978] CPU2 attaching sched-domain:
    [   26.146991]  domain 0: span 2-3 level SIBLING
    [   26.147005]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [   26.147037]   domain 1: span 2-3 level MC
    [   26.147050]    groups: 2-3 (cpu_power = 1178)
    [   26.147074]    domain 2: span 0-3 level CPU
    [   26.147088]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [   26.147123] CPU3 attaching sched-domain:
    [   26.147136]  domain 0: span 2-3 level SIBLING
    [   26.147150]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [   26.147182]   domain 1: span 2-3 level MC
    [   26.147195]    groups: 2-3 (cpu_power = 1178)
    [   26.147219]    domain 2: span 0-3 level CPU
    [   26.147233]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [   29.393111] eth0: no IPv6 routers present
    [   61.308932] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 4312.079634] CPU0 attaching NULL sched-domain.
    [ 4312.079662] CPU1 attaching NULL sched-domain.
    [ 4312.079677] CPU2 attaching NULL sched-domain.
    [ 4312.079691] CPU3 attaching NULL sched-domain.
    [ 4312.110357] CPU0 attaching sched-domain:
    [ 4312.110377]  domain 0: span 0-1 level SIBLING
    [ 4312.110394]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4312.110429]   domain 1: span 0-1 level MC
    [ 4312.110443]    groups: 0-1 (cpu_power = 1178)
    [ 4312.110468]    domain 2: span 0-3 level CPU
    [ 4312.110482]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4312.110521] CPU1 attaching sched-domain:
    [ 4312.110534]  domain 0: span 0-1 level SIBLING
    [ 4312.110548]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4312.110579]   domain 1: span 0-1 level MC
    [ 4312.110593]    groups: 0-1 (cpu_power = 1178)
    [ 4312.110617]    domain 2: span 0-3 level CPU
    [ 4312.110631]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4312.110667] CPU2 attaching sched-domain:
    [ 4312.110680]  domain 0: span 2-3 level SIBLING
    [ 4312.110694]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4312.110726]   domain 1: span 2-3 level MC
    [ 4312.110739]    groups: 2-3 (cpu_power = 1178)
    [ 4312.110763]    domain 2: span 0-3 level CPU
    [ 4312.110777]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4312.110812] CPU3 attaching sched-domain:
    [ 4312.110825]  domain 0: span 2-3 level SIBLING
    [ 4312.110839]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4312.110871]   domain 1: span 2-3 level MC
    [ 4312.110884]    groups: 2-3 (cpu_power = 1178)
    [ 4312.110908]    domain 2: span 0-3 level CPU
    [ 4312.110922]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.104854] CPU0 attaching NULL sched-domain.
    [ 4321.104881] CPU1 attaching NULL sched-domain.
    [ 4321.104897] CPU2 attaching NULL sched-domain.
    [ 4321.104911] CPU3 attaching NULL sched-domain.
    [ 4321.133499] CPU0 attaching sched-domain:
    [ 4321.133518]  domain 0: span 0-1 level SIBLING
    [ 4321.133535]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4321.133571]   domain 1: span 0-1 level MC
    [ 4321.133585]    groups: 0-1 (cpu_power = 1178)
    [ 4321.133610]    domain 2: span 0-3 level CPU
    [ 4321.133624]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.133663] CPU1 attaching sched-domain:
    [ 4321.133676]  domain 0: span 0-1 level SIBLING
    [ 4321.133690]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4321.133722]   domain 1: span 0-1 level MC
    [ 4321.133735]    groups: 0-1 (cpu_power = 1178)
    [ 4321.133759]    domain 2: span 0-3 level CPU
    [ 4321.133773]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.133808] CPU2 attaching sched-domain:
    [ 4321.133821]  domain 0: span 2-3 level SIBLING
    [ 4321.133835]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4321.133866]   domain 1: span 2-3 level MC
    [ 4321.133880]    groups: 2-3 (cpu_power = 1178)
    [ 4321.133904]    domain 2: span 0-3 level CPU
    [ 4321.133918]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.133953] CPU3 attaching sched-domain:
    [ 4321.133966]  domain 0: span 2-3 level SIBLING
    [ 4321.133980]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4321.134011]   domain 1: span 2-3 level MC
    [ 4321.134025]    groups: 2-3 (cpu_power = 1178)
    [ 4321.134049]    domain 2: span 0-3 level CPU
    [ 4321.134062]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.567911] CPU0 attaching NULL sched-domain.
    [ 4321.567940] CPU1 attaching NULL sched-domain.
    [ 4321.567956] CPU2 attaching NULL sched-domain.
    [ 4321.567970] CPU3 attaching NULL sched-domain.
    [ 4321.598044] CPU0 attaching sched-domain:
    [ 4321.598064]  domain 0: span 0-1 level SIBLING
    [ 4321.598081]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4321.598116]   domain 1: span 0-1 level MC
    [ 4321.598131]    groups: 0-1 (cpu_power = 1178)
    [ 4321.598156]    domain 2: span 0-3 level CPU
    [ 4321.598170]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.598210] CPU1 attaching sched-domain:
    [ 4321.598222]  domain 0: span 0-1 level SIBLING
    [ 4321.598237]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4321.598268]   domain 1: span 0-1 level MC
    [ 4321.598281]    groups: 0-1 (cpu_power = 1178)
    [ 4321.598305]    domain 2: span 0-3 level CPU
    [ 4321.598319]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.598355] CPU2 attaching sched-domain:
    [ 4321.598367]  domain 0: span 2-3 level SIBLING
    [ 4321.598381]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4321.598413]   domain 1: span 2-3 level MC
    [ 4321.598427]    groups: 2-3 (cpu_power = 1178)
    [ 4321.598450]    domain 2: span 0-3 level CPU
    [ 4321.598464]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.598498] CPU3 attaching sched-domain:
    [ 4321.598511]  domain 0: span 2-3 level SIBLING
    [ 4321.598525]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4321.598557]   domain 1: span 2-3 level MC
    [ 4321.598570]    groups: 2-3 (cpu_power = 1178)
    [ 4321.598594]    domain 2: span 0-3 level CPU
    [ 4321.598608]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4322.047770] CPU0 attaching NULL sched-domain.
    [ 4322.047798] CPU1 attaching NULL sched-domain.
    [ 4322.047814] CPU2 attaching NULL sched-domain.
    [ 4322.047827] CPU3 attaching NULL sched-domain.
    [ 4322.073074] CPU0 attaching sched-domain:
    [ 4322.073092]  domain 0: span 0-1 level SIBLING
    [ 4322.073109]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4322.073144]   domain 1: span 0-1 level MC
    [ 4322.073158]    groups: 0-1 (cpu_power = 1178)
    [ 4322.073183]    domain 2: span 0-3 level CPU
    [ 4322.073197]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4322.073235] CPU1 attaching sched-domain:
    [ 4322.073248]  domain 0: span 0-1 level SIBLING
    [ 4322.073262]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4322.073295]   domain 1: span 0-1 level MC
    [ 4322.073315]    groups: 0-1 (cpu_power = 1178)
    [ 4322.073350]    domain 2: span 0-3 level CPU
    [ 4322.073366]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4322.073402] CPU2 attaching sched-domain:
    [ 4322.073415]  domain 0: span 2-3 level SIBLING
    [ 4322.073429]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4322.073461]   domain 1: span 2-3 level MC
    [ 4322.073474]    groups: 2-3 (cpu_power = 1178)
    [ 4322.073498]    domain 2: span 0-3 level CPU
    [ 4322.073512]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4322.073546] CPU3 attaching sched-domain:
    [ 4322.073558]  domain 0: span 2-3 level SIBLING
    [ 4322.073572]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4322.073604]   domain 1: span 2-3 level MC
    [ 4322.073617]    groups: 2-3 (cpu_power = 1178)
    [ 4322.073641]    domain 2: span 0-3 level CPU
    [ 4322.073654]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [59556.063100] device eth0 left promiscuous mode
    [59570.209248] device eth0 entered promiscuous mode
    [59570.301146] device eth0 left promiscuous mode
    [59570.378629] device eth0 entered promiscuous mode
    [145866.373306] device eth0 left promiscuous mode
    [145874.543790] device eth0 entered promiscuous mode
    [145874.595769] device eth0 left promiscuous mode
    [145874.632215] device eth0 entered promiscuous mode
    uname -r
    Code:
    2.6.32-42-generic-pae
    ifconfig -a
    Code:
    eth0      Link encap:Ethernet  HWaddr 04:7d:7b:99:10:f2
              inet addr:10.0.0.9  Bcast:10.0.0.255  Mask:255.255.255.0
              inet6 addr: fe80::67d:7bff:fe99:10f2/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:237856 errors:0 dropped:0 overruns:0 frame:0
              TX packets:90519 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:173965008 (173.9 MB)  TX bytes:10411141 (10.4 MB)
              Interrupt:27 Base address:0xa000
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:6435 errors:0 dropped:0 overruns:0 frame:0
              TX packets:6435 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:321412 (321.4 KB)  TX bytes:321412 (321.4 KB)
    Ran the Wireless script:
    Code:
    lo        no wireless extensions.
    
    eth0      no wireless extensions.

  4. #4
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Hmm, the module doesn't appear to load. Try this command:
    Code:
    sudo modprobe wl
    post any output you get. If no output, then try this command and post any output:
    Code:
    sudo ifconfig -a
    Hopefully you will see eth0 lo and one more.
    Last edited by MikeTbob; 09-01-2012 at 08:40 PM. Reason: weird goof
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  5. #5
    Just Joined!
    Join Date
    Nov 2009
    Location
    FL
    Posts
    12
    sudo modprobe wl

    Code:
    FATAL: Error inserting wl (/lib/modules/2.6.32-42-generic-pae/updates/dkms/wl.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    FATAL: Error running install command for wl
    sudo ifconfig -a
    Code:
    eth0      Link encap:Ethernet  HWaddr 04:7d:7b:99:10:f2
              inet addr:10.0.0.9  Bcast:10.0.0.255  Mask:255.255.255.0
              inet6 addr: fe80::67d:7bff:fe99:10f2/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:251428 errors:0 dropped:0 overruns:0 frame:0
              TX packets:95056 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:175511562 (175.5 MB)  TX bytes:11902098 (11.9 MB)
              Interrupt:27 Base address:0xa000
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:7032 errors:0 dropped:0 overruns:0 frame:0
              TX packets:7032 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:351112 (351.1 KB)  TX bytes:351112 (351.1 KB)

  6. #6
    Linux Guru rokytnji's Avatar
    Join Date
    Jul 2008
    Location
    Desert
    Posts
    3,997
    see dmesg
    Is your answer for that error. MTBOB may need that readout also.

    Code:
    dmesg
    Linux Registered User # 475019
    Lead,Follow, or get the heck out of the way. I Have a Masters in Raising Hell
    Tech Books
    Free Linux Books
    Newbie Guide
    Courses at Home

  7. #7
    Just Joined!
    Join Date
    Nov 2009
    Location
    FL
    Posts
    12
    Latest - dmesg

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-42-generic-pae (buildd@aatxe) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #95-Ubuntu SMP Wed Jul 25 16:13:09 UTC 2012 (Ubuntu 2.6.32-42.95-generic-pae 2.6.32.59+drm33.24)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f4af000 (usable)
    [    0.000000]  BIOS-e820: 000000003f4af000 - 000000003f5af000 (reserved)
    [    0.000000]  BIOS-e820: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000003f6af000 - 000000003f6ef000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000003f6ef000 - 000000003f6f0000 (usable)
    [    0.000000]  BIOS-e820: 000000003f6f0000 - 0000000040000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.7 present.
    [    0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
    [    0.000000]   1 base 000000000 mask FE0000000 write-back
    [    0.000000]   2 base 020000000 mask FE0000000 write-back
    [    0.000000]   3 base 03F800000 mask FFF800000 uncachable
    [    0.000000]   4 disabled
    [    0.000000]   5 base 03F6F0000 mask FFFFF0000 uncachable
    [    0.000000]   6 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 000000000009e800 (usable)
    [    0.000000]  modified: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000003f4af000 (usable)
    [    0.000000]  modified: 000000003f4af000 - 000000003f5af000 (reserved)
    [    0.000000]  modified: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
    [    0.000000]  modified: 000000003f6af000 - 000000003f6ef000 (ACPI data)
    [    0.000000]  modified: 000000003f6ef000 - 000000003f6f0000 (usable)
    [    0.000000]  modified: 000000003f6f0000 - 0000000040000000 (reserved)
    [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00e00000
    [    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037800000 page 2M
    [    0.000000]  0037800000 - 00379fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
    [    0.000000] RAMDISK: 2eaa5000 - 2f7c2acc
    [    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    [    0.000000] ACPI: XSDT 3f6ee120 0008C (v01 ACRSYS ACRPRDCT 00000001      01000013)
    [    0.000000] ACPI: FACP 3f6ed000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: DSDT 3f6e1000 0786E (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
    [    0.000000] ACPI: FACS 3f675000 00040
    [    0.000000] ACPI: HPET 3f6ec000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: APIC 3f6eb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: MCFG 3f6ea000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: WDRT 3f6e9000 00047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
    [    0.000000] ACPI: SLIC 3f6e0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: BOOT 3f6df000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: MSDM 3f6de000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: FPDT 3f6dc000 00090 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [    0.000000] ACPI: SSDT 3f6db000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [    0.000000] ACPI: SSDT 3f6da000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [    0.000000] ACPI: SSDT 3f6d9000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [    0.000000] ACPI: WDAT 3f6d8000 00194 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 124MB HIGHMEM available.
    [    0.000000] 889MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 379fe000
    [    0.000000]   low ram: 0 - 379fe000
    [    0.000000]   node 0 low ram: 00000000 - 379fe000
    [    0.000000]   node 0 bootmap 00009000 - 0000ff40
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 000093e818]    TEXT DATA BSS ==> [0000100000 - 000093e818]
    [    0.000000]   #4 [002eaa5000 - 002f7c2acc]          RAMDISK ==> [002eaa5000 - 002f7c2acc]
    [    0.000000]   #5 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
    [    0.000000]   #6 [000093f000 - 00009462b0]              BRK ==> [000093f000 - 00009462b0]
    [    0.000000]   #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
    [    0.000000]   #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
    [    0.000000] found SMP MP-table at [c00fe260] fe260
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000379fe
    [    0.000000]   HighMem  0x000379fe -> 0x0003f6f0
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[4] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x0003f4af
    [    0.000000]     0: 0x0003f6ef -> 0x0003f6f0
    [    0.000000] On node 0 totalpages: 259146
    [    0.000000] free_area_init_node: node 0, pgdat c07df020, node_mem_map c1001000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3962 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1748 pages used for memmap
    [    0.000000]   Normal zone: 221994 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 250 pages used for memmap
    [    0.000000]   HighMem zone: 31160 pages, LIFO batch:7
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x408
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 15 pages/cpu @c1800000 s39480 r0 d21960 u524288
    [    0.000000] pcpu-alloc: s39480 r0 d21960 u524288 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257116
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-42-generic-pae root=UUID=fa197c61-c35b-4c51-9631-c19a613d5150 ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 5196480 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000379fe:0003f6f0)
    [    0.000000] Memory: 999648k/1039296k available (4852k kernel code, 36200k reserved, 2225k data, 680k init, 125640k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
    [    0.000000]       .init : 0xc07ea000 - 0xc0894000   ( 680 kB)
    [    0.000000]       .data : 0xc05bd1ef - 0xc07e99c8   (2225 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc05bd1ef   (4852 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:440
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.004000] Detected 1595.940 MHz processor.
    [    0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.88 BogoMIPS (lpj=6383760)
    [    0.000043] Security Framework initialized
    [    0.000083] AppArmor: AppArmor initialized
    [    0.000100] Mount-cache hash table entries: 512
    [    0.000344] Initializing cgroup subsys ns
    [    0.000353] Initializing cgroup subsys cpuacct
    [    0.000363] Initializing cgroup subsys memory
    [    0.000377] Initializing cgroup subsys devices
    [    0.000384] Initializing cgroup subsys freezer
    [    0.000389] Initializing cgroup subsys net_cls
    [    0.000428] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.000435] CPU: L2 cache: 512K
    [    0.000441] CPU: Physical Processor ID: 0
    [    0.000445] CPU: Processor Core ID: 0
    [    0.000452] mce: CPU supports 5 MCE banks
    [    0.000464] CPU0: Thermal monitoring handled by SMI
    [    0.000472] using mwait in idle threads.
    [    0.000484] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
    [    0.000497] ... version:                3
    [    0.000501] ... bit width:              40
    [    0.000506] ... generic registers:      2
    [    0.000511] ... value mask:             000000ffffffffff
    [    0.000516] ... max period:             000000007fffffff
    [    0.000521] ... fixed-purpose events:   3
    [    0.000526] ... event mask:             0000000700000003
    [    0.000535] Checking 'hlt' instruction... OK.
    [    0.017205] ACPI: Core revision 20090903
    [    0.063995] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.064006] ftrace: allocating 22472 entries in 44 pages
    [    0.072534] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.072994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.112645] CPU0: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.220836] Booting processor 1 APIC 0x1 ip 0x6000
    [    0.230869] Initializing CPU#1
    [    0.308421] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.308427] CPU: L2 cache: 512K
    [    0.308433] CPU: Physical Processor ID: 0
    [    0.308437] CPU: Processor Core ID: 0
    [    0.308452] CPU1: Thermal monitoring handled by SMI
    [    0.308463] CPU1: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.308480] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.328675] Booting processor 2 APIC 0x2 ip 0x6000
    [    0.338631] Initializing CPU#2
    [    0.416316] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.416322] CPU: L2 cache: 512K
    [    0.416326] CPU: Physical Processor ID: 0
    [    0.416329] CPU: Processor Core ID: 1
    [    0.416342] CPU2: Thermal monitoring handled by SMI
    [    0.416367] CPU2: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.416382] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    [    0.436533] Booting processor 3 APIC 0x3 ip 0x6000
    [    0.446490] Initializing CPU#3
    [    0.524212] CPU: L1 I cache: 32K, L1 D cache: 24K
    [    0.524217] CPU: L2 cache: 512K
    [    0.524221] CPU: Physical Processor ID: 0
    [    0.524225] CPU: Processor Core ID: 1
    [    0.524237] CPU3: Thermal monitoring handled by SMI
    [    0.524322] CPU3: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz stepping 01
    [    0.524336] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    [    0.544350] Brought up 4 CPUs
    [    0.544356] Total of 4 processors activated (12767.84 BogoMIPS).
    [    0.544916] CPU0 attaching sched-domain:
    [    0.544925]  domain 0: span 0-1 level SIBLING
    [    0.544931]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [    0.544944]   domain 1: span 0-1 level MC
    [    0.544949]    groups: 0-1 (cpu_power = 1178)
    [    0.544958]    domain 2: span 0-3 level CPU
    [    0.544964]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [    0.544980] CPU1 attaching sched-domain:
    [    0.544985]  domain 0: span 0-1 level SIBLING
    [    0.544990]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [    0.545002]   domain 1: span 0-1 level MC
    [    0.545007]    groups: 0-1 (cpu_power = 1178)
    [    0.545016]    domain 2: span 0-3 level CPU
    [    0.545021]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [    0.545034] CPU2 attaching sched-domain:
    [    0.545039]  domain 0: span 2-3 level SIBLING
    [    0.545044]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [    0.545055]   domain 1: span 2-3 level MC
    [    0.545060]    groups: 2-3 (cpu_power = 1178)
    [    0.545069]    domain 2: span 0-3 level CPU
    [    0.545074]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [    0.545088] CPU3 attaching sched-domain:
    [    0.545092]  domain 0: span 2-3 level SIBLING
    [    0.545097]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [    0.545109]   domain 1: span 2-3 level MC
    [    0.545114]    groups: 2-3 (cpu_power = 1178)
    [    0.545123]    domain 2: span 0-3 level CPU
    [    0.545128]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [    0.546048] devtmpfs: initialized
    [    0.547004] regulator: core version 0.5
    [    0.547048] Time: 19:01:49  Date: 08/30/12
    [    0.547147] NET: Registered protocol family 16
    [    0.547402] Trying to unpack rootfs image as initramfs...
    [    0.547420] EISA bus registered
    [    0.547439] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.547445] ACPI: bus type pci registered
    [    0.547576] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.547583] PCI: MCFG area at e0000000 reserved in E820
    [    0.547587] PCI: Using MMCONFIG for extended config space
    [    0.547592] PCI: Using configuration type 1 for base access
    [    0.549885] bio: create slab <bio-0> at 0
    [    0.551955] ACPI: EC: Look up EC in DSDT
    [    0.554091] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.560057] ACPI: BIOS _OSI(Linux) query ignored
    [    0.571146] ACPI: Interpreter enabled
    [    0.571154] ACPI: (supports S0 S3 S4 S5)
    [    0.571207] ACPI: Using IOAPIC for interrupt routing
    [    0.584650] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [    0.585221] ACPI: No dock devices found.
    [    0.586080] _OSC invalid UUID
    [    0.586087] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.586241] pci 0000:00:02.0: reg 10 32bit mmio: [0x46000000-0x460fffff]
    [    0.586251] pci 0000:00:02.0: reg 14 io port: [0x50d0-0x50d7]
    [    0.586423] pci 0000:00:1b.0: reg 10 64bit mmio: [0x46100000-0x46103fff]
    [    0.586548] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.586558] pci 0000:00:1b.0: PME# disabled
    [    0.586733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.586742] pci 0000:00:1c.0: PME# disabled
    [    0.586920] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.586929] pci 0000:00:1c.1: PME# disabled
    [    0.587106] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.587114] pci 0000:00:1c.2: PME# disabled
    [    0.587217] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
    [    0.587321] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
    [    0.587424] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
    [    0.587528] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
    [    0.587636] pci 0000:00:1d.7: reg 10 32bit mmio: [0x46105000-0x461053ff]
    [    0.587755] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.587764] pci 0000:00:1d.7: PME# disabled
    [    0.588123] pci 0000:00:1f.2: reg 10 io port: [0x50c8-0x50cf]
    [    0.588137] pci 0000:00:1f.2: reg 14 io port: [0x50dc-0x50df]
    [    0.588169] pci 0000:00:1f.2: reg 18 io port: [0x50c0-0x50c7]
    [    0.588183] pci 0000:00:1f.2: reg 1c io port: [0x50d8-0x50db]
    [    0.588197] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f]
    [    0.588211] pci 0000:00:1f.2: reg 24 32bit mmio: [0x46104000-0x461043ff]
    [    0.588293] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.588303] pci 0000:00:1f.2: PME# disabled
    [    0.588384] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
    [    0.588622] pci 0000:01:00.0: reg 10 io port: [0x4000-0x40ff]
    [    0.588705] pci 0000:01:00.0: reg 18 64bit mmio pref: [0x40004000-0x40004fff]
    [    0.588765] pci 0000:01:00.0: reg 20 64bit mmio pref: [0x40000000-0x40003fff]
    [    0.589084] pci 0000:01:00.0: supports D1 D2
    [    0.589090] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.589108] pci 0000:01:00.0: PME# disabled
    [    0.589297] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
    [    0.589307] pci 0000:00:1c.0: bridge 32bit mmio: [0x45000000-0x45ffffff]
    [    0.589322] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x40000000-0x40ffffff]
    [    0.589419] pci 0000:02:00.0: reg 10 64bit mmio: [0x44000000-0x44003fff]
    [    0.589566] pci 0000:02:00.0: supports D1 D2
    [    0.589571] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    0.589580] pci 0000:02:00.0: PME# disabled
    [    0.589692] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    [    0.589701] pci 0000:00:1c.1: bridge 32bit mmio: [0x44000000-0x44ffffff]
    [    0.589715] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x41000000-0x41ffffff]
    [    0.589916] pci 0000:03:00.0: reg 10 32bit mmio: [0x43001000-0x43001fff]
    [    0.590343] pci 0000:03:00.0: supports D1 D2
    [    0.590348] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    [    0.590366] pci 0000:03:00.0: PME# disabled
    [    0.590525] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
    [    0.590534] pci 0000:00:1c.2: bridge 32bit mmio: [0x43000000-0x43ffffff]
    [    0.590548] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x42000000-0x42ffffff]
    [    0.590634] pci 0000:00:1e.0: transparent bridge
    [    0.590691] pci_bus 0000:00: on NUMA node 0
    [    0.590703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.591049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [    0.591190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [    0.591328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [    0.591648] _OSC invalid UUID
    [    0.606350] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [    0.606579] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.606811] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [    0.607041] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [    0.607266] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [    0.607501] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [    0.607725] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [    0.607948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [    0.608204] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.608232] vgaarb: loaded
    [    0.608477] SCSI subsystem initialized
    [    0.608772] libata version 3.00 loaded.
    [    0.608965] usbcore: registered new interface driver usbfs
    [    0.609000] usbcore: registered new interface driver hub
    [    0.609071] usbcore: registered new device driver usb
    [    0.609442] ACPI: WMI: Mapper loaded
    [    0.609447] PCI: Using ACPI for IRQ routing
    [    0.609788] NetLabel: Initializing
    [    0.609793] NetLabel:  domain hash size = 128
    [    0.609796] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.609820] NetLabel:  unlabeled traffic allowed by default
    [    0.609916] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.609928] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.611965] Switching to clocksource tsc
    [    0.618486] AppArmor: AppArmor Filesystem Enabled
    [    0.618533] pnp: PnP ACPI init
    [    0.618576] ACPI: bus type pnp registered
    [    0.622954] pnp: PnP ACPI: found 11 devices
    [    0.622963] ACPI: ACPI bus type pnp unregistered
    [    0.622972] PnPBIOS: Disabled by ACPI PNP
    [    0.623015] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    [    0.623043] system 00:07: ioport range 0x680-0x69f has been reserved
    [    0.623056] system 00:07: ioport range 0x1000-0x1003 has been reserved
    [    0.623067] system 00:07: ioport range 0x1010-0x101f has been reserved
    [    0.623077] system 00:07: ioport range 0x1004-0x1007 has been reserved
    [    0.623087] system 00:07: ioport range 0x400-0x47f has been reserved
    [    0.623097] system 00:07: ioport range 0x500-0x57f has been reserved
    [    0.623106] system 00:07: ioport range 0x600-0x61f has been reserved
    [    0.623126] system 00:08: ioport range 0x6a0-0x6af has been reserved
    [    0.623136] system 00:08: ioport range 0x6b0-0x6ff has been reserved
    [    0.623156] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [    0.623167] system 00:0a: iomem range 0x0-0x3fff could not be reserved
    [    0.623176] system 00:0a: iomem range 0x0-0xfff could not be reserved
    [    0.623186] system 00:0a: iomem range 0x0-0xfff could not be reserved
    [    0.623196] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
    [    0.658348] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    [    0.658357] pci 0000:00:1c.0:   IO window: 0x4000-0x4fff
    [    0.658370] pci 0000:00:1c.0:   MEM window: 0x45000000-0x45ffffff
    [    0.658381] pci 0000:00:1c.0:   PREFETCH window: 0x00000040000000-0x00000040ffffff
    [    0.658396] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    [    0.658404] pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
    [    0.658415] pci 0000:00:1c.1:   MEM window: 0x44000000-0x44ffffff
    [    0.658425] pci 0000:00:1c.1:   PREFETCH window: 0x00000041000000-0x00000041ffffff
    [    0.658440] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
    [    0.658447] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
    [    0.658459] pci 0000:00:1c.2:   MEM window: 0x43000000-0x43ffffff
    [    0.658469] pci 0000:00:1c.2:   PREFETCH window: 0x00000042000000-0x00000042ffffff
    [    0.658483] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
    [    0.658488] pci 0000:00:1e.0:   IO window: disabled
    [    0.658498] pci 0000:00:1e.0:   MEM window: disabled
    [    0.658507] pci 0000:00:1e.0:   PREFETCH window: disabled
    [    0.658541]   alloc irq_desc for 16 on node -1
    [    0.658546]   alloc kstat_irqs on node -1
    [    0.658559] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.658570] pci 0000:00:1c.0: setting latency timer to 64
    [    0.658589]   alloc irq_desc for 17 on node -1
    [    0.658594]   alloc kstat_irqs on node -1
    [    0.658602] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.658612] pci 0000:00:1c.1: setting latency timer to 64
    [    0.658630]   alloc irq_desc for 18 on node -1
    [    0.658634]   alloc kstat_irqs on node -1
    [    0.658642] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.658652] pci 0000:00:1c.2: setting latency timer to 64
    [    0.658666] pci 0000:00:1e.0: setting latency timer to 64
    [    0.658676] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.658683] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    [    0.658689] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
    [    0.658696] pci_bus 0000:01: resource 1 mem: [0x45000000-0x45ffffff]
    [    0.658702] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x40ffffff]
    [    0.658709] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
    [    0.658715] pci_bus 0000:02: resource 1 mem: [0x44000000-0x44ffffff]
    [    0.658721] pci_bus 0000:02: resource 2 pref mem [0x41000000-0x41ffffff]
    [    0.658727] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
    [    0.658733] pci_bus 0000:03: resource 1 mem: [0x43000000-0x43ffffff]
    [    0.658740] pci_bus 0000:03: resource 2 pref mem [0x42000000-0x42ffffff]
    [    0.658746] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
    [    0.658752] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
    [    0.658838] NET: Registered protocol family 2
    [    0.659045] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.659699] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.660710] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.661161] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.661168] TCP reno registered
    [    0.661399] NET: Registered protocol family 1
    [    0.661444] pci 0000:00:02.0: Boot video device
    [    0.661479] pci 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.661509] pci 0000:00:1d.0: PCI INT A disabled
    [    0.661525]   alloc irq_desc for 19 on node -1
    [    0.661530]   alloc kstat_irqs on node -1
    [    0.661543] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.661571] pci 0000:00:1d.1: PCI INT B disabled
    [    0.661585] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.661613] pci 0000:00:1d.2: PCI INT C disabled
    [    0.661627] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    0.661654] pci 0000:00:1d.3: PCI INT D disabled
    [    0.661675] pci 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.191831] Freeing initrd memory: 13430k freed
    [    2.267248] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [    2.267385] pci 0000:00:1d.7: PCI INT A disabled
    [    2.267455] Simple Boot Flag at 0x44 set to 0x1
    [    2.268023] cpufreq-nforce2: No nForce2 chipset.
    [    2.268085] Scanning for low memory corruption every 60 seconds
    [    2.268324] audit: initializing netlink socket (disabled)
    [    2.268345] type=2000 audit(1346353311.092:1): initialized
    [    2.286319] highmem bounce pool size: 64 pages
    [    2.286331] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    2.289968] VFS: Disk quotas dquot_6.5.2
    [    2.290106] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    2.291541] fuse init (API version 7.13)
    [    2.291751] msgmni has been set to 1734
    [    2.292577] alg: No test for stdrng (krng)
    [    2.292738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    2.292745] io scheduler noop registered
    [    2.292750] io scheduler anticipatory registered
    [    2.292755] io scheduler deadline registered
    [    2.292861] io scheduler cfq registered (default)
    [    2.293152]   alloc irq_desc for 24 on node -1
    [    2.293158]   alloc kstat_irqs on node -1
    [    2.293178] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    2.293197] pcieport 0000:00:1c.0: setting latency timer to 64
    [    2.293452]   alloc irq_desc for 25 on node -1
    [    2.293457]   alloc kstat_irqs on node -1
    [    2.293473] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    2.293491] pcieport 0000:00:1c.1: setting latency timer to 64
    [    2.293744]   alloc irq_desc for 26 on node -1
    [    2.293748]   alloc kstat_irqs on node -1
    [    2.293764] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
    [    2.293782] pcieport 0000:00:1c.2: setting latency timer to 64
    [    2.293970] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    2.294196] _OSC invalid UUID
    [    2.294388] _OSC invalid UUID
    [    2.294571] _OSC invalid UUID
    [    2.294791] _OSC invalid UUID
    [    2.294974] _OSC invalid UUID
    [    2.295156] _OSC invalid UUID
    [    2.295217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    2.295578] ACPI: AC Adapter [ACAD] (on-line)
    [    2.295778] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    2.295787] ACPI: Power Button [PWRB]
    [    2.295888] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [    2.295895] ACPI: Sleep Button [SLPB]
    [    2.295996] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    [    2.296109] ACPI: Lid Switch [LID]
    [    2.296210] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    2.296217] ACPI: Power Button [PWRF]
    [    2.297715] ACPI: SSDT 3f567a90 002E9 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
    [    2.298682] ACPI: SSDT 3f566710 006DB (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
    [    2.304051] Monitor-Mwait will be used to enter C-1 state
    [    2.304139] Monitor-Mwait will be used to enter C-2 state
    [    2.304243] processor LNXCPU:00: registered as cooling_device0
    [    2.305179] ACPI: SSDT 3f567e10 001CF (v01  PmRef    ApIst 00003000 INTL 20100121)
    [    2.305960] ACPI: SSDT 3f565f10 0008D (v01  PmRef    ApCst 00003000 INTL 20100121)
    [    2.308146] processor LNXCPU:01: registered as cooling_device1
    [    2.310773] processor LNXCPU:02: registered as cooling_device2
    [    2.313346] processor LNXCPU:03: registered as cooling_device3
    [    2.317994] thermal LNXTHERM:01: registered as thermal_zone0
    [    2.318012] ACPI: Thermal Zone [THRM] (40 C)
    [    2.318294] isapnp: Scanning for PnP cards...
    [    2.320468] ACPI: Battery Slot [BAT1] (battery present)
    [    2.322732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    2.326510] brd: module loaded
    [    2.327973] loop: module loaded
    [    2.328280] input: Macintosh mouse button emulation as /devices/virtual/input/input4
    [    2.329528] Fixed MDIO Bus: probed
    [    2.329630] PPP generic driver version 2.4.2
    [    2.329727] tun: Universal TUN/TAP device driver, 1.6
    [    2.329733] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    2.329975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.330021] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.330063] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    2.330072] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    2.330182] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    2.330233] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [    2.330256] ehci_hcd 0000:00:1d.7: debug port 1
    [    2.334159] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    2.334196] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x46105000
    [    2.351145] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    2.351390] usb usb1: configuration #1 chosen from 1 choice
    [    2.351456] hub 1-0:1.0: USB hub found
    [    2.351475] hub 1-0:1.0: 8 ports detected
    [    2.351620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.351664] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.351732] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.351752] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    2.351759] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    2.351843] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    2.351890] uhci_hcd 0000:00:1d.0: irq 17, io base 0x000050a0
    [    2.352087] usb usb2: configuration #1 chosen from 1 choice
    [    2.352154] hub 2-0:1.0: USB hub found
    [    2.352169] hub 2-0:1.0: 2 ports detected
    [    2.352262] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.352278] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    2.352285] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    2.352359] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    2.352416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
    [    2.352627] usb usb3: configuration #1 chosen from 1 choice
    [    2.352687] hub 3-0:1.0: USB hub found
    [    2.352702] hub 3-0:1.0: 2 ports detected
    [    2.352793] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.352809] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    2.352816] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    2.352892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    2.352947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
    [    2.353149] usb usb4: configuration #1 chosen from 1 choice
    [    2.353211] hub 4-0:1.0: USB hub found
    [    2.353225] hub 4-0:1.0: 2 ports detected
    [    2.353321] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    2.353337] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    2.353344] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    2.353426] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    2.353481] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005040
    [    2.353681] usb usb5: configuration #1 chosen from 1 choice
    [    2.353742] hub 5-0:1.0: USB hub found
    [    2.353759] hub 5-0:1.0: 2 ports detected
    [    2.353949] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    2.360156] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    2.363517] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.363534] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    2.363544] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    2.363554] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    2.363564] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    2.363787] mice: PS/2 mouse device common for all mice
    [    2.364135] rtc_cmos 00:09: RTC can wake from S4
    [    2.364222] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
    [    2.364270] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    2.364522] device-mapper: uevent: version 1.0.3
    [    2.364774] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    2.365018] device-mapper: multipath: version 1.1.0 loaded
    [    2.365025] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    2.365303] EISA: Probing bus 0 at eisa.0
    [    2.365315] Cannot allocate resource for EISA slot 1
    [    2.365321] Cannot allocate resource for EISA slot 2
    [    2.365326] Cannot allocate resource for EISA slot 3
    [    2.365331] Cannot allocate resource for EISA slot 4
    [    2.365336] Cannot allocate resource for EISA slot 5
    [    2.365360] EISA: Detected 0 cards.
    [    2.365924] cpuidle: using governor ladder
    [    2.366280] cpuidle: using governor menu
    [    2.367239] TCP cubic registered
    [    2.367654] NET: Registered protocol family 10
    [    2.369407] NET: Registered protocol family 17
    [    2.371999] Using IPI No-Shortcut mode
    [    2.372194] PM: Resume from disk failed.
    [    2.372218] registered taskstats version 1
    [    2.373063]   Magic number: 8:245:42
    [    2.373081] bdi 7:7: hash matches
    [    2.373200] rtc_cmos 00:09: setting system clock to 2012-08-30 19:01:51 UTC (1346353311)
    [    2.373208] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.373212] EDD information not available.
    [    2.385108] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
    [    2.672554] isapnp: No Plug & Play device found
    [    2.672633] Freeing unused kernel memory: 680k freed
    [    2.673234] Write protecting the kernel text: 4856k
    [    2.673378] Write protecting the kernel read-only data: 1888k
    [    2.722355] ramzswap: disk size set to 507244 kB
    [    2.733374] udev: starting version 151
    [    2.775349] usb 1-3: new high speed USB device using ehci_hcd and address 4
    [    2.775898] Adding 507240k swap on /dev/ramzswap0.  Priority:100 extents:1 across:507240k SS
    [    2.797862] vga16fb: initializing
    [    2.797873] vga16fb: mapped to 0xc00a0000
    [    2.798014] fb0: VGA16 VGA frame buffer device
    [    2.855962] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    2.856029] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.856183] r8169 0000:01:00.0: setting latency timer to 64
    [    2.856205] r8169 0000:01:00.0: unknown MAC, using family default
    [    2.856391]   alloc irq_desc for 27 on node -1
    [    2.856399]   alloc kstat_irqs on node -1
    [    2.856452] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
    [    2.858447] eth0: RTL8101e at 0xf842a000, 04:7d:7b:99:10:f2, XID 00a00000 IRQ 27
    [    2.893430] ahci 0000:00:1f.2: version 3.0
    [    2.893471] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.893572]   alloc irq_desc for 28 on node -1
    [    2.893580]   alloc kstat_irqs on node -1
    [    2.893606] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
    [    2.893689] ahci: SSS flag set, parallel bus scan disabled
    [    2.893760] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [    2.893773] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
    [    2.893788] ahci 0000:00:1f.2: setting latency timer to 64
    [    2.897944] scsi0 : ahci
    [    2.906192] scsi1 : ahci
    [    2.907271] scsi2 : ahci
    [    2.907552] scsi3 : ahci
    [    2.907720] ata1: SATA max UDMA/133 abar m1024@0x46104000 port 0x46104100 irq 28
    [    2.907733] ata2: SATA max UDMA/133 abar m1024@0x46104000 port 0x46104180 irq 28
    [    2.907741] ata3: DUMMY
    [    2.907746] ata4: DUMMY
    [    2.979046] usb 1-3: configuration #1 chosen from 1 choice
    [    3.219373] usb 2-1: new low speed USB device using uhci_hcd and address 2
    [    3.227395] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.228918] ata1.00: ATA-8: FUJITSU MJA2080BH G2, 00850019, max UDMA/100
    [    3.228942] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    3.230712] ata1.00: configured for UDMA/100
    [    3.246568] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MJA2080B 0085 PQ: 0 ANSI: 5
    [    3.247035] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    3.247074] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    3.247218] sd 0:0:0:0: [sda] Write Protect is off
    [    3.247226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    3.247295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.247669]  sda: sda1 sda2 < sda5 >
    [    3.315405] sd 0:0:0:0: [sda] Attached SCSI disk
    [    3.381244] usb 2-1: configuration #1 chosen from 1 choice
    [    3.566056] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.607767] usbcore: registered new interface driver hiddev
    [    3.622308] input: HID 0461:4d04 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
    [    3.622574] generic-usb 0003:0461:4D04.0001: input,hidraw0: USB HID v1.00 Mouse [HID 0461:4d04] on usb-0000:00:1d.0-1/input0
    [    3.622630] usbcore: registered new interface driver usbhid
    [    3.622637] usbhid: v2.6:USB HID core driver
    [    3.623815] usb 2-2: new low speed USB device using uhci_hcd and address 3
    [    3.705708] Console: switching to colour frame buffer device 80x30
    [    3.803857] usb 2-2: configuration #1 chosen from 1 choice
    [    3.821130] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input7
    [    3.821376] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
    [    3.854599] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8
    [    3.854931] generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
    [    4.202394] xor: automatically using best checksumming function: pIII_sse
    [    4.222294]    pIII_sse  :  4755.000 MB/sec
    [    4.222300] xor: using function: pIII_sse (4755.000 MB/sec)
    [    4.229351] device-mapper: dm-raid45: initialized v0.2594b
    [    4.432372] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [   17.622013] Adding 2969592k swap on /dev/sda5.  Priority:-1 extents:1 across:2969592k
    [   17.637228] udev: starting version 151
    [   17.756065] lp: driver loaded but no devices found
    [   18.032578] Linux video capture interface: v2.00
    [   18.063582] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d250)
    [   18.081280] acer-wmi: Acer Laptop ACPI-WMI Extras
    [   18.081309] acer-wmi: No or unsupported WMI interface, unable to load
    [   18.081466] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input9
    [   18.081665] usbcore: registered new interface driver uvcvideo
    [   18.081676] USB Video Class driver (v0.1.0)
    [   18.103923] type=1505 audit(1346353327.242:2):  operation="profile_load" pid=669 name="/sbin/dhclient3"
    [   18.108794] type=1505 audit(1346353327.250:3):  operation="profile_load" pid=669 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   18.109289] type=1505 audit(1346353327.250:4):  operation="profile_load" pid=669 name="/usr/lib/connman/scripts/dhclient-script"
    [   18.377651]   alloc irq_desc for 22 on node -1
    [   18.377661]   alloc kstat_irqs on node -1
    [   18.377682] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   18.377865] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   18.501707] type=1505 audit(1346353327.642:5):  operation="profile_load" pid=850 name="/usr/sbin/tcpdump"
    [   18.504720] type=1505 audit(1346353327.646:6):  operation="profile_load" pid=849 name="/usr/lib/cups/backend/cups-pdf"
    [   18.505889] type=1505 audit(1346353327.646:7):  operation="profile_load" pid=849 name="/usr/sbin/cupsd"
    [   18.506939] type=1505 audit(1346353327.646:8):  operation="profile_replace" pid=847 name="/sbin/dhclient3"
    [   18.507764] type=1505 audit(1346353327.646:9):  operation="profile_replace" pid=847 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   18.508325] type=1505 audit(1346353327.650:10):  operation="profile_replace" pid=847 name="/usr/lib/connman/scripts/dhclient-script"
    [   18.533003] hda_codec: ALC269: BIOS auto-probing.
    [   18.533667] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    [   18.605419] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    [   18.649670] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
    [   18.738683] r8169: eth0: link up
    [   18.738709] r8169: eth0: link up
    [   19.042772] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    [   24.285244] device eth0 entered promiscuous mode
    [   24.349133] device eth0 left promiscuous mode
    [   24.410033] device eth0 entered promiscuous mode
    [   24.635153] ppdev: user-space parallel port driver
    [   26.091532] CPU0 attaching NULL sched-domain.
    [   26.091546] CPU1 attaching NULL sched-domain.
    [   26.091552] CPU2 attaching NULL sched-domain.
    [   26.091557] CPU3 attaching NULL sched-domain.
    [   26.146670] CPU0 attaching sched-domain:
    [   26.146690]  domain 0: span 0-1 level SIBLING
    [   26.146706]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [   26.146741]   domain 1: span 0-1 level MC
    [   26.146755]    groups: 0-1 (cpu_power = 1178)
    [   26.146780]    domain 2: span 0-3 level CPU
    [   26.146794]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [   26.146834] CPU1 attaching sched-domain:
    [   26.146846]  domain 0: span 0-1 level SIBLING
    [   26.146861]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [   26.146892]   domain 1: span 0-1 level MC
    [   26.146906]    groups: 0-1 (cpu_power = 1178)
    [   26.146930]    domain 2: span 0-3 level CPU
    [   26.146943]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [   26.146978] CPU2 attaching sched-domain:
    [   26.146991]  domain 0: span 2-3 level SIBLING
    [   26.147005]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [   26.147037]   domain 1: span 2-3 level MC
    [   26.147050]    groups: 2-3 (cpu_power = 1178)
    [   26.147074]    domain 2: span 0-3 level CPU
    [   26.147088]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [   26.147123] CPU3 attaching sched-domain:
    [   26.147136]  domain 0: span 2-3 level SIBLING
    [   26.147150]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [   26.147182]   domain 1: span 2-3 level MC
    [   26.147195]    groups: 2-3 (cpu_power = 1178)
    [   26.147219]    domain 2: span 0-3 level CPU
    [   26.147233]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [   29.393111] eth0: no IPv6 routers present
    [   61.308932] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 4312.079634] CPU0 attaching NULL sched-domain.
    [ 4312.079662] CPU1 attaching NULL sched-domain.
    [ 4312.079677] CPU2 attaching NULL sched-domain.
    [ 4312.079691] CPU3 attaching NULL sched-domain.
    [ 4312.110357] CPU0 attaching sched-domain:
    [ 4312.110377]  domain 0: span 0-1 level SIBLING
    [ 4312.110394]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4312.110429]   domain 1: span 0-1 level MC
    [ 4312.110443]    groups: 0-1 (cpu_power = 1178)
    [ 4312.110468]    domain 2: span 0-3 level CPU
    [ 4312.110482]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4312.110521] CPU1 attaching sched-domain:
    [ 4312.110534]  domain 0: span 0-1 level SIBLING
    [ 4312.110548]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4312.110579]   domain 1: span 0-1 level MC
    [ 4312.110593]    groups: 0-1 (cpu_power = 1178)
    [ 4312.110617]    domain 2: span 0-3 level CPU
    [ 4312.110631]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4312.110667] CPU2 attaching sched-domain:
    [ 4312.110680]  domain 0: span 2-3 level SIBLING
    [ 4312.110694]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4312.110726]   domain 1: span 2-3 level MC
    [ 4312.110739]    groups: 2-3 (cpu_power = 1178)
    [ 4312.110763]    domain 2: span 0-3 level CPU
    [ 4312.110777]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4312.110812] CPU3 attaching sched-domain:
    [ 4312.110825]  domain 0: span 2-3 level SIBLING
    [ 4312.110839]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4312.110871]   domain 1: span 2-3 level MC
    [ 4312.110884]    groups: 2-3 (cpu_power = 1178)
    [ 4312.110908]    domain 2: span 0-3 level CPU
    [ 4312.110922]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.104854] CPU0 attaching NULL sched-domain.
    [ 4321.104881] CPU1 attaching NULL sched-domain.
    [ 4321.104897] CPU2 attaching NULL sched-domain.
    [ 4321.104911] CPU3 attaching NULL sched-domain.
    [ 4321.133499] CPU0 attaching sched-domain:
    [ 4321.133518]  domain 0: span 0-1 level SIBLING
    [ 4321.133535]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4321.133571]   domain 1: span 0-1 level MC
    [ 4321.133585]    groups: 0-1 (cpu_power = 1178)
    [ 4321.133610]    domain 2: span 0-3 level CPU
    [ 4321.133624]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.133663] CPU1 attaching sched-domain:
    [ 4321.133676]  domain 0: span 0-1 level SIBLING
    [ 4321.133690]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4321.133722]   domain 1: span 0-1 level MC
    [ 4321.133735]    groups: 0-1 (cpu_power = 1178)
    [ 4321.133759]    domain 2: span 0-3 level CPU
    [ 4321.133773]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.133808] CPU2 attaching sched-domain:
    [ 4321.133821]  domain 0: span 2-3 level SIBLING
    [ 4321.133835]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4321.133866]   domain 1: span 2-3 level MC
    [ 4321.133880]    groups: 2-3 (cpu_power = 1178)
    [ 4321.133904]    domain 2: span 0-3 level CPU
    [ 4321.133918]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.133953] CPU3 attaching sched-domain:
    [ 4321.133966]  domain 0: span 2-3 level SIBLING
    [ 4321.133980]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4321.134011]   domain 1: span 2-3 level MC
    [ 4321.134025]    groups: 2-3 (cpu_power = 1178)
    [ 4321.134049]    domain 2: span 0-3 level CPU
    [ 4321.134062]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.567911] CPU0 attaching NULL sched-domain.
    [ 4321.567940] CPU1 attaching NULL sched-domain.
    [ 4321.567956] CPU2 attaching NULL sched-domain.
    [ 4321.567970] CPU3 attaching NULL sched-domain.
    [ 4321.598044] CPU0 attaching sched-domain:
    [ 4321.598064]  domain 0: span 0-1 level SIBLING
    [ 4321.598081]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4321.598116]   domain 1: span 0-1 level MC
    [ 4321.598131]    groups: 0-1 (cpu_power = 1178)
    [ 4321.598156]    domain 2: span 0-3 level CPU
    [ 4321.598170]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.598210] CPU1 attaching sched-domain:
    [ 4321.598222]  domain 0: span 0-1 level SIBLING
    [ 4321.598237]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4321.598268]   domain 1: span 0-1 level MC
    [ 4321.598281]    groups: 0-1 (cpu_power = 1178)
    [ 4321.598305]    domain 2: span 0-3 level CPU
    [ 4321.598319]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4321.598355] CPU2 attaching sched-domain:
    [ 4321.598367]  domain 0: span 2-3 level SIBLING
    [ 4321.598381]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4321.598413]   domain 1: span 2-3 level MC
    [ 4321.598427]    groups: 2-3 (cpu_power = 1178)
    [ 4321.598450]    domain 2: span 0-3 level CPU
    [ 4321.598464]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4321.598498] CPU3 attaching sched-domain:
    [ 4321.598511]  domain 0: span 2-3 level SIBLING
    [ 4321.598525]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4321.598557]   domain 1: span 2-3 level MC
    [ 4321.598570]    groups: 2-3 (cpu_power = 1178)
    [ 4321.598594]    domain 2: span 0-3 level CPU
    [ 4321.598608]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4322.047770] CPU0 attaching NULL sched-domain.
    [ 4322.047798] CPU1 attaching NULL sched-domain.
    [ 4322.047814] CPU2 attaching NULL sched-domain.
    [ 4322.047827] CPU3 attaching NULL sched-domain.
    [ 4322.073074] CPU0 attaching sched-domain:
    [ 4322.073092]  domain 0: span 0-1 level SIBLING
    [ 4322.073109]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 4322.073144]   domain 1: span 0-1 level MC
    [ 4322.073158]    groups: 0-1 (cpu_power = 1178)
    [ 4322.073183]    domain 2: span 0-3 level CPU
    [ 4322.073197]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4322.073235] CPU1 attaching sched-domain:
    [ 4322.073248]  domain 0: span 0-1 level SIBLING
    [ 4322.073262]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 4322.073295]   domain 1: span 0-1 level MC
    [ 4322.073315]    groups: 0-1 (cpu_power = 1178)
    [ 4322.073350]    domain 2: span 0-3 level CPU
    [ 4322.073366]     groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
    [ 4322.073402] CPU2 attaching sched-domain:
    [ 4322.073415]  domain 0: span 2-3 level SIBLING
    [ 4322.073429]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
    [ 4322.073461]   domain 1: span 2-3 level MC
    [ 4322.073474]    groups: 2-3 (cpu_power = 1178)
    [ 4322.073498]    domain 2: span 0-3 level CPU
    [ 4322.073512]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [ 4322.073546] CPU3 attaching sched-domain:
    [ 4322.073558]  domain 0: span 2-3 level SIBLING
    [ 4322.073572]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
    [ 4322.073604]   domain 1: span 2-3 level MC
    [ 4322.073617]    groups: 2-3 (cpu_power = 1178)
    [ 4322.073641]    domain 2: span 0-3 level CPU
    [ 4322.073654]     groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
    [59556.063100] device eth0 left promiscuous mode
    [59570.209248] device eth0 entered promiscuous mode
    [59570.301146] device eth0 left promiscuous mode
    [59570.378629] device eth0 entered promiscuous mode
    [145866.373306] device eth0 left promiscuous mode
    [145874.543790] device eth0 entered promiscuous mode
    [145874.595769] device eth0 left promiscuous mode
    [145874.632215] device eth0 entered promiscuous mode
    [190721.177961] lib80211: common routines for IEEE802.11 drivers
    [190721.177987] lib80211_crypt: registered algorithm 'NULL'
    [190721.275672] wl: module license 'MIXED/Proprietary' taints kernel.
    [190721.275698] Disabling lock debugging due to kernel taint
    [190721.283015] wl: disagrees about version of symbol lib80211_get_crypto_ops
    [190721.283035] wl: Unknown symbol lib80211_get_crypto_ops

  8. #8
    Linux Guru rokytnji's Avatar
    Join Date
    Jul 2008
    Location
    Desert
    Posts
    3,997
    [190721.275672] wl: module license 'MIXED/Proprietary' taints kernel.
    Just posting the bug report for MTBOB. I am not broadcom proicient. I never use broadcom wireless on any of my gear.

    https://bugs.launchpad.net/ubuntu/+s...wl/+bug/395630
    Linux Registered User # 475019
    Lead,Follow, or get the heck out of the way. I Have a Masters in Raising Hell
    Tech Books
    Free Linux Books
    Newbie Guide
    Courses at Home

  9. #9
    Just Joined!
    Join Date
    Nov 2009
    Location
    FL
    Posts
    12
    Whooo Whooo!!
    Thanks Guys Couldn't have done it without you!

    Here's everything since the last dmesg entry:

    Code:
    modprobe wl
    sudo apt-get install --reinstall bcmwl-kernel-source
    sudo modprobe -r lib80211
    sudo modprobe wl
    sudo ifconfig -a
    Reboot

  10. #10
    Linux Guru rokytnji's Avatar
    Join Date
    Jul 2008
    Location
    Desert
    Posts
    3,997
    Cool. Glad you got it sorted. You can mark the thread as solved with thread tools above your original post.
    MikeTbob likes this.
    Linux Registered User # 475019
    Lead,Follow, or get the heck out of the way. I Have a Masters in Raising Hell
    Tech Books
    Free Linux Books
    Newbie Guide
    Courses at Home

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •