Find the answer to your Linux question:
Results 1 to 2 of 2
went to their website and got the right drivers and instuctions for install but cant carry them out proparly here are the instuctions Manually Editing the Configuration File In April ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jan 2013
    Posts
    10

    need assistance with nvidia driver install?


    went to their website and got the right drivers and instuctions for install but cant carry them out proparly

    here are the instuctions

    Manually Editing the Configuration File

    In April 2004 the X.Org Foundation released an X server based on the XFree86 server. While your release may use the X.Org X server, rather than XFree86, the differences between the two should have no impact on NVIDIA Linux users with two exceptions:

    The X.Org configuration file is /etc/X11/xorg.conf while the XFree86 configuration file is /etc/X11/XF86Config. The files use the same syntax. This document refers to both files as “the X config file”.

    The X.Org log file is /var/log/Xorg.#.log while the XFree86 log file is /var/log/XFree86.#.log (where # is the server number -- usually 0). The format of the log files is nearly identical. This document refers to both files as “the X log file”.

    In order for any changes to be read into the X server, you must edit the file used by the server. While it is not unreasonable to simply edit both files, it is easy to determine the correct file by searching for the line

    (==) Using config file:

    in the X log file. This line indicates the name of the X config file in use.

    If you do not have a working X config file, there are a few different ways to obtain one. A sample config file is included both with the XFree86 distribution and with the NVIDIA driver package (at /usr/share/doc/NVIDIA_GLX-1.0/). Tools for generating a config file (such as xf86config) are generally included with Linux. Additional information on the X config syntax can be found in the XF86Config manual page (man XF86Config or man xorg.conf).

    If you have a working X config file for a different driver (such as the “nv” or “vesa” driver), then simply edit the file as follows.

    Remove the line:

    Driver "nv"
    (or Driver "vesa")
    (or Driver "fbdev")

    and replace it with the line:

    Driver "nvidia"

    Remove the following lines:

    Load "dri"
    Load "GLCore"

    In the Module section of the file, add the line (if it does not already exist):

    Load "glx"

    If the X config file does not have a Module section, you can safely skip the last step if the X server installed on your system is an X.Org X server or an XFree86 X release version 4.4.0 or greater. If you are using an older XFree86 X server, add the following to your X config file:

    Section "Module"
    Load "extmod"
    Load "dbe"
    Load "type1"
    Load "freetype"
    Load "glx"
    EndSection

    There are numerous options that may be added to the X config file to tune the NVIDIA X driver. See Appendix B, X Config Options for a complete list of these options.

    Once you have completed these edits to the X config file, you may restart X and begin using the accelerated OpenGL libraries. After restarting X, any OpenGL application should automatically use the new NVIDIA libraries. (NOTE: If you encounter any problems, see Chapter 8, Common Problems for common problem diagnoses.)

    when i go in to the xorg.conf file
    it looks like this now that I modifidy it??????
    Section "Device"

    Identifier "Configured Video Device"
    Driver "nvidia"
    Load "glx"
    EndSection

    Section "Monitor"
    Identifier "Configured Monitor"
    EndSection

    Section "Screen"
    Identifier "Default Screen"
    Monitor "Configured Monitor"
    Device "Configured Video Device"
    EndSection
    i think im doing it wrong because it cant run the installer without it saying i have an error with the x server.



    can someone please giver me some advice on how to get this thing to install???????
    Last edited by glutetoot; 03-24-2013 at 07:53 PM.

  2. #2
    Just Joined!
    Join Date
    Dec 2012
    Posts
    30
    xorg.conf is usually not required for X to start. You may not like the resolution that it chooses, but it should start nevertheless.

    So, rename xorg.conf, then try to install your driver. Do you get any errors?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •