Results 1 to 4 of 4
My problem is that: i ve used the command lsusb, but my system doesn't repond at all, i have tried it several times and in different usb and it doesnt ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 07-12-2006 #1
Yet another usb problem!
My problem is that: i ve used the command lsusb, but my system doesn't repond at all, i have tried it several times and in different usb and it doesnt work too. however when i unplug my usb pen, and lsusb respond and show something like this:
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
When i use the command dmesg | tail (with usb pen plugged)
[263.158698] usb 1-3: new full speed USB device using ohci_hcd and address 2
[264.157273] ohci_hcd 0000:00:01.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ
What should i do?
- 07-12-2006 #2
Did you try the "noapic" boot parameter as I instructed you here ?
http://www.linuxforums.org/forum/ubu...assword-2.html"To express yourself in freedom, you must die to everything of yesterday. From the 'old', you derive security; from the 'new', you gain the flow."
- 07-12-2006 #3
- 07-12-2006 #4