Results 11 to 20 of 23
Here you go..
lspci -nn
Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 01-24-2009 #11Just Joined!
- Join Date
- Jan 2009
- Posts
- 11
Here you go..
lspci -nn
lsmodCode:00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 07:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Device [11ab:436c] (rev 16) 08:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) 0a:01.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) 0a:01.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02) 0a:01.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)
dmesgCode:Module Size Used by xt_TCPMSS 12160 1 xt_tcpmss 10112 1 xt_tcpudp 11008 1 iptable_mangle 10880 1 i915 38528 2 drm 86056 3 i915 pppoe 18496 2 pppox 11276 1 pppoe rfcomm 44432 0 bridge 56980 0 stp 10628 1 bridge bnep 20480 2 sco 18308 2 l2cap 30464 6 rfcomm,bnep bluetooth 61924 6 rfcomm,bnep,sco,l2cap ppdev 15620 0 acpi_cpufreq 15500 1 cpufreq_stats 13188 0 cpufreq_userspace 11396 0 cpufreq_conservative 14600 1 cpufreq_ondemand 14988 0 freq_table 12672 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand cpufreq_powersave 9856 0 container 11520 0 pci_slot 12680 0 sbs 19464 0 sbshc 13440 1 sbs af_packet 25728 2 ppp_generic 32668 6 pppoe,pppox slhc 14208 1 ppp_generic ipv6 263972 16 iptable_filter 10752 0 ip_tables 19600 2 iptable_mangle,iptable_filter x_tables 22916 4 xt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables nls_iso8859_1 12032 2 nls_cp437 13696 2 vfat 18816 2 fat 57376 1 vfat dm_crypt 21124 0 dm_mod 63432 1 dm_crypt sbp2 29324 0 parport_pc 39204 0 lp 17156 0 parport 42604 3 ppdev,parport_pc,lp joydev 18368 0 snd_hda_intel 384176 1 snd_pcm_oss 46848 0 snd_mixer_oss 22784 1 snd_pcm_oss uvcvideo 63624 0 arc4 9984 2 sdhci_pci 15360 0 pcspkr 10624 0 serio_raw 13444 0 compat_ioctl32 9344 1 uvcvideo ecb 10880 2 sdhci 23940 1 sdhci_pci crypto_blkcipher 25476 2 dm_crypt,ecb psmouse 45200 0 videodev 41344 1 uvcvideo snd_pcm 83204 2 snd_hda_intel,snd_pcm_oss iTCO_wdt 18596 0 mmc_core 58268 1 sdhci v4l1_compat 22404 2 uvcvideo,videodev iTCO_vendor_support 11652 1 iTCO_wdt evdev 17696 12 iwl3945 98804 0 rfkill 17176 2 iwl3945 snd_seq_dummy 10884 0 mac80211 216820 1 iwl3945 snd_seq_oss 38528 0 led_class 12164 1 iwl3945 snd_seq_midi 14336 0 snd_rawmidi 29824 1 snd_seq_midi cfg80211 32392 2 iwl3945,mac80211 snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 29960 2 snd_pcm,snd_seq snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 63268 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device video 25232 0 soundcore 15328 1 snd output 11008 1 video wmi 14504 0 ac 12292 0 button 14224 0 intel_agp 33724 1 agpgart 42184 3 drm,intel_agp battery 18436 0 snd_page_alloc 16136 2 snd_hda_intel,snd_pcm shpchp 38036 0 pci_hotplug 34976 1 shpchp ext3 133256 2 jbd 55828 1 ext3 mbcache 16004 1 ext3 sr_mod 22212 0 cdrom 43168 1 sr_mod sd_mod 42392 6 crc_t10dif 9984 1 sd_mod sg 39732 0 ata_generic 12932 0 pata_acpi 12160 0 usbhid 35840 0 hid 50560 1 usbhid ohci1394 37936 0 ata_piix 24580 0 ieee1394 96324 2 sbp2,ohci1394 ahci 37132 5 libata 178208 4 ata_generic,pata_acpi,ata_piix,ahci scsi_mod 155212 5 sbp2,sr_mod,sd_mod,sg,libata dock 16656 1 libata sky2 53380 0 ehci_hcd 43788 0 uhci_hcd 30736 0 usbcore 149360 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd thermal 23708 0 processor 42156 4 acpi_cpufreq,thermal fan 12548 0 fbcon 47648 0 tileblit 10880 1 fbcon font 16512 1 fbcon bitblit 13824 1 fbcon softcursor 9984 1 bitblit fuse 60828 1
uname -rCode:[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 22 17:22:40 UTC 2009 (Ubuntu 2.6.27-11.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 377c9000 - 37fef75d [ 0.000000] ACPI: RSDP 000F76A0, 0024 (r2 TOSQCI) [ 0.000000] ACPI: XSDT 7F6D2D25, 0074 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DFC92, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D416B, BAB3 (r2 TOSQCI N.Jersey 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS 7F6E2FC0, 0040 [ 0.000000] ACPI: HPET 7F6DFD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DFDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 7F6DFDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7F6DFE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7F6DFE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F6D3EBE, 02AD (r1 SataRe SataAhci 1000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D3325, 025F (r1 PmRef Cpu0Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D327F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7F6D2D99, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) [ 0.000000] ACPI: DMI detected: Toshiba [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0] [ 0.000000] #4 [00377c9000 - 0037fef75d] RAMDISK ==> [00377c9000 - 0037fef75d] [ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000] [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7750] 000f7750 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0007f6d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6d0 [ 0.000000] On node 0 totalpages: 521839 [ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 289988 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517251 [ 0.000000] Kernel command line: root=UUID=71ea1f2b-4e70-4c66-b158-972a852350fd ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PMTIMER calibration value [ 0.000000] Detected 1828.726 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2053984k/2087744k available (2576k kernel code, 32544k reserved, 1165k data, 424k init, 1170240k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB) [ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB) [ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.45 BogoMIPS (lpj=7314904) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.017986] ACPI: Core revision 20080609 [ 0.022235] ACPI: Checking initramfs for custom DSDT [ 0.408262] ENABLING IO-APIC IRQs [ 0.408457] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.450538] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.452028] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3657.51 BogoMIPS (lpj=7315036) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.536497] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.536515] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.540050] Brought up 2 CPUs [ 0.540053] Total of 2 processors activated (7314.97 BogoMIPS). [ 0.540076] CPU0 attaching sched-domain: [ 0.540079] domain 0: span 0-1 level MC [ 0.540082] groups: 0 1 [ 0.540088] CPU1 attaching sched-domain: [ 0.540091] domain 0: span 0-1 level MC [ 0.540093] groups: 1 0 [ 0.540173] net_namespace: 840 bytes [ 0.540173] Booting paravirtualized kernel on bare hardware [ 0.540313] Time: 19:29:00 Date: 01/24/09 [ 0.540339] NET: Registered protocol family 16 [ 0.540359] EISA bus registered [ 0.540359] ACPI: bus type pci registered [ 0.540359] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.540359] PCI: MCFG area at e0000000 reserved in E820 [ 0.540359] PCI: Using MMCONFIG for extended config space [ 0.540359] PCI: Using configuration type 1 for base access [ 0.544119] ACPI: EC: Look up EC in DSDT [ 0.550078] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.551820] ACPI: Interpreter enabled [ 0.551824] ACPI: (supports S0 S3 S4 S5) [ 0.551834] ACPI: Using IOAPIC for interrupt routing [ 0.552781] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1.052036] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.073419] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 1.073419] ACPI: EC: driver started in poll mode [ 1.073419] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.073419] PCI: 0000:00:02.0 reg 10 64bit mmio: [f0000000, f00fffff] [ 1.073419] PCI: 0000:00:02.0 reg 18 64bit mmio: [d0000000, dfffffff] [ 1.073419] PCI: 0000:00:02.0 reg 20 io port: [1800, 1807] [ 1.073419] PCI: 0000:00:02.1 reg 10 64bit mmio: [f0100000, f01fffff] [ 1.073419] PCI: 0000:00:1a.0 reg 20 io port: [1820, 183f] [ 1.076075] PCI: 0000:00:1a.1 reg 20 io port: [1840, 185f] [ 1.076153] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f0704800, f0704bff] [ 1.076217] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.076224] pci 0000:00:1a.7: PME# disabled [ 1.076276] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0500000, f0503fff] [ 1.076335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.076340] pci 0000:00:1b.0: PME# disabled [ 1.076420] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.076425] pci 0000:00:1c.0: PME# disabled [ 1.076503] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.076509] pci 0000:00:1c.1: PME# disabled [ 1.076588] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.076594] pci 0000:00:1c.2: PME# disabled [ 1.076672] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.076678] pci 0000:00:1c.3: PME# disabled [ 1.076756] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.076762] pci 0000:00:1c.4: PME# disabled [ 1.076841] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.076846] pci 0000:00:1c.5: PME# disabled [ 1.076899] PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f] [ 1.076969] PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f] [ 1.077039] PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf] [ 1.077116] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0704c00, f0704fff] [ 1.077179] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.077185] pci 0000:00:1d.7: PME# disabled [ 1.077360] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 1.077365] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 1.077397] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 1.077406] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 1.077415] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 1.077424] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 1.077432] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f] [ 1.077513] PCI: 0000:00:1f.2 reg 10 io port: [1c00, 1c07] [ 1.077521] PCI: 0000:00:1f.2 reg 14 io port: [18d4, 18d7] [ 1.077530] PCI: 0000:00:1f.2 reg 18 io port: [18d8, 18df] [ 1.077539] PCI: 0000:00:1f.2 reg 1c io port: [18d0, 18d3] [ 1.077548] PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ff] [ 1.077557] PCI: 0000:00:1f.2 reg 24 32bit mmio: [f0704000, f07047ff] [ 1.077594] pci 0000:00:1f.2: PME# supported from D3hot [ 1.077599] pci 0000:00:1f.2: PME# disabled [ 1.077623] PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff] [ 1.077651] PCI: 0000:00:1f.3 reg 20 io port: [1c20, 1c3f] [ 1.077745] PCI: bridge 0000:00:1c.0 io port: [0, fff] [ 1.077751] PCI: bridge 0000:00:1c.0 32bit mmio: [0, fffff] [ 1.077760] PCI: bridge 0000:00:1c.0 64bit mmio pref: [0, fffff] [ 1.077829] PCI: bridge 0000:00:1c.1 io port: [0, fff] [ 1.077834] PCI: bridge 0000:00:1c.1 32bit mmio: [0, fffff] [ 1.077843] PCI: bridge 0000:00:1c.1 64bit mmio pref: [0, fffff] [ 1.077911] PCI: bridge 0000:00:1c.2 io port: [0, fff] [ 1.077917] PCI: bridge 0000:00:1c.2 32bit mmio: [0, fffff] [ 1.077926] PCI: bridge 0000:00:1c.2 64bit mmio pref: [0, fffff] [ 1.077994] PCI: bridge 0000:00:1c.3 io port: [0, fff] [ 1.077999] PCI: bridge 0000:00:1c.3 32bit mmio: [0, fffff] [ 1.078008] PCI: bridge 0000:00:1c.3 64bit mmio pref: [0, fffff] [ 1.078086] PCI: 0000:07:00.0 reg 10 64bit mmio: [f0200000, f0203fff] [ 1.078098] PCI: 0000:07:00.0 reg 18 io port: [2000, 20ff] [ 1.078138] PCI: 0000:07:00.0 reg 30 32bit mmio: [0, 1ffff] [ 1.078173] pci 0000:07:00.0: supports D1 [ 1.078175] pci 0000:07:00.0: supports D2 [ 1.078177] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.078184] pci 0000:07:00.0: PME# disabled [ 1.078242] PCI: bridge 0000:00:1c.4 io port: [0, fff] [ 1.078248] PCI: bridge 0000:00:1c.4 32bit mmio: [0, fffff] [ 1.078257] PCI: bridge 0000:00:1c.4 64bit mmio pref: [0, fffff] [ 1.078407] PCI: 0000:08:00.0 reg 10 32bit mmio: [f0300000, f0300fff] [ 1.078622] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 1.078636] pci 0000:08:00.0: PME# disabled [ 1.078695] PCI: bridge 0000:00:1c.5 io port: [0, fff] [ 1.078700] PCI: bridge 0000:00:1c.5 32bit mmio: [0, fffff] [ 1.078709] PCI: bridge 0000:00:1c.5 64bit mmio pref: [0, fffff] [ 1.078757] PCI: 0000:0a:01.0 reg 10 32bit mmio: [f0400000, f0400fff] [ 1.078766] PCI: 0000:0a:01.0 reg 14 32bit mmio: [f0402000, f04027ff] [ 1.078819] pci 0000:0a:01.0: supports D1 [ 1.078821] pci 0000:0a:01.0: supports D2 [ 1.078823] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.078828] pci 0000:0a:01.0: PME# disabled [ 1.078877] PCI: 0000:0a:01.2 reg 10 32bit mmio: [f0402800, f04028ff] [ 1.078949] pci 0000:0a:01.2: supports D1 [ 1.078951] pci 0000:0a:01.2: supports D2 [ 1.078953] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.078959] pci 0000:0a:01.2: PME# disabled [ 1.079005] PCI: 0000:0a:01.3 reg 10 32bit mmio: [f0401000, f0401fff] [ 1.079077] pci 0000:0a:01.3: supports D1 [ 1.079079] pci 0000:0a:01.3: supports D2 [ 1.079081] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.079087] pci 0000:0a:01.3: PME# disabled [ 1.079159] pci 0000:00:1e.0: transparent bridge [ 1.079168] PCI: bridge 0000:00:1e.0 32bit mmio: [f0400000, f04fffff] [ 1.079226] bus 00 -> node 0 [ 1.079233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.079678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.079862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.080054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 1.080236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.080416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 1.080599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.080804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.101007] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.101007] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.101007] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.104125] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 1.104285] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.104445] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 1.104604] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.104763] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.104855] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.104855] pnp: PnP ACPI init [ 1.104855] ACPI: bus type pnp registered [ 1.105023] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x68-0x68) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x68-0x68) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x68-0x68) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x68-0x68) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.3 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x68-0x68) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.4 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x61-0x61) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x63-0x63) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x65-0x65) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x67-0x67) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x68-0x68) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.105023] pnp 00:05: io resource (0x800-0x80f) overlaps 0000:00:1c.5 BAR 7 (0x0-0xfff), disabling [ 1.108996] pnp: PnP ACPI: found 9 devices [ 1.108996] ACPI: ACPI bus type pnp unregistered [ 1.108996] PnPBIOS: Disabled by ACPI PNP [ 1.108996] PCI: Using ACPI for IRQ routing [ 1.108996] pci 0000:00:1c.0: BAR 7: can't allocate resource [ 1.108996] pci 0000:00:1c.0: BAR 8: can't allocate resource [ 1.108996] pci 0000:00:1c.0: BAR 9: can't allocate resource [ 1.108996] pci 0000:00:1c.1: BAR 7: can't allocate resource [ 1.108996] pci 0000:00:1c.1: BAR 8: can't allocate resource [ 1.108996] pci 0000:00:1c.1: BAR 9: can't allocate resource [ 1.108996] pci 0000:00:1c.2: BAR 7: can't allocate resource [ 1.108996] pci 0000:00:1c.2: BAR 8: can't allocate resource [ 1.108996] pci 0000:00:1c.2: BAR 9: can't allocate resource [ 1.108996] pci 0000:00:1c.3: BAR 7: can't allocate resource [ 1.108996] pci 0000:00:1c.3: BAR 8: can't allocate resource [ 1.108996] pci 0000:00:1c.3: BAR 9: can't allocate resource [ 1.108996] pci 0000:00:1c.4: BAR 7: can't allocate resource [ 1.108996] pci 0000:00:1c.4: BAR 8: can't allocate resource [ 1.108996] pci 0000:00:1c.4: BAR 9: can't allocate resource [ 1.108996] pci 0000:00:1c.5: BAR 7: can't allocate resource [ 1.108996] pci 0000:00:1c.5: BAR 8: can't allocate resource [ 1.108996] pci 0000:00:1c.5: BAR 9: can't allocate resource [ 1.108996] pci 0000:07:00.0: BAR 0: can't allocate resource [ 1.108996] pci 0000:07:00.0: BAR 2: can't allocate resource [ 1.108996] pci 0000:08:00.0: BAR 0: can't allocate resource [ 1.116040] NET: Registered protocol family 8 [ 1.116043] NET: Registered protocol family 20 [ 1.116060] NetLabel: Initializing [ 1.116060] NetLabel: domain hash size = 128 [ 1.116060] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.116068] NetLabel: unlabeled traffic allowed by default [ 1.116076] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.116082] hpet0: 3 64-bit timers, 14318180 Hz [ 1.117601] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 1.117604] actual entries 65620 [ 1.117699] AppArmor: AppArmor Filesystem Enabled [ 1.117728] ACPI: RTC can wake from S4 [ 1.120039] Switched to high resolution mode on CPU 0 [ 1.120533] Switched to high resolution mode on CPU 1 [ 1.124022] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 1.124026] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 1.124030] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 1.124033] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 1.124037] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.124040] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 1.124043] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 1.124047] system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved [ 1.124055] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved [ 1.124063] system 00:05: ioport range 0x1000-0x107f has been reserved [ 1.124066] system 00:05: ioport range 0x1180-0x11bf has been reserved [ 1.124069] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 1.159265] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.159267] pci 0000:00:1c.0: IO window: disabled [ 1.159275] pci 0000:00:1c.0: MEM window: disabled [ 1.159280] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.159289] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 1.159292] pci 0000:00:1c.1: IO window: disabled [ 1.159299] pci 0000:00:1c.1: MEM window: disabled [ 1.159304] pci 0000:00:1c.1: PREFETCH window: disabled [ 1.159313] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 1.159315] pci 0000:00:1c.2: IO window: disabled [ 1.159321] pci 0000:00:1c.2: MEM window: disabled [ 1.159327] pci 0000:00:1c.2: PREFETCH window: disabled [ 1.159336] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 1.159338] pci 0000:00:1c.3: IO window: disabled [ 1.159345] pci 0000:00:1c.3: MEM window: disabled [ 1.159350] pci 0000:00:1c.3: PREFETCH window: disabled [ 1.159374] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 1.159378] pci 0000:00:1c.4: IO window: 0x2000-0x2fff [ 1.159386] pci 0000:00:1c.4: MEM window: 0x88000000-0x880fffff [ 1.159392] pci 0000:00:1c.4: PREFETCH window: 0x00000088100000-0x000000881fffff [ 1.159413] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 1.159415] pci 0000:00:1c.5: IO window: disabled [ 1.159422] pci 0000:00:1c.5: MEM window: 0x88200000-0x882fffff [ 1.159428] pci 0000:00:1c.5: PREFETCH window: disabled [ 1.159437] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 1.159439] pci 0000:00:1e.0: IO window: disabled [ 1.159446] pci 0000:00:1e.0: MEM window: 0xf0400000-0xf04fffff [ 1.159452] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.159471] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.159480] pci 0000:00:1c.0: setting latency timer to 64 [ 1.159491] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.159498] pci 0000:00:1c.1: setting latency timer to 64 [ 1.159509] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.159516] pci 0000:00:1c.2: setting latency timer to 64 [ 1.159526] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.159534] pci 0000:00:1c.3: setting latency timer to 64 [ 1.159544] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 1.159548] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.159556] pci 0000:00:1c.4: setting latency timer to 64 [ 1.159565] pci 0000:00:1c.5: enabling device (0000 -> 0002) [ 1.159569] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.159577] pci 0000:00:1c.5: setting latency timer to 64 [ 1.159587] pci 0000:00:1e.0: setting latency timer to 64 [ 1.159591] bus: 00 index 0 io port: [0, ffff] [ 1.159594] bus: 00 index 1 mmio: [0, ffffffff] [ 1.159596] bus: 02 index 0 mmio: [0, fff] [ 1.159599] bus: 02 index 1 mmio: [0, fffff] [ 1.159601] bus: 02 index 2 mmio: [0, fffff] [ 1.159603] bus: 02 index 3 mmio: [0, 0] [ 1.159605] bus: 04 index 0 mmio: [0, fff] [ 1.159607] bus: 04 index 1 mmio: [0, fffff] [ 1.159609] bus: 04 index 2 mmio: [0, fffff] [ 1.159611] bus: 04 index 3 mmio: [0, 0] [ 1.159614] bus: 05 index 0 mmio: [0, fff] [ 1.159616] bus: 05 index 1 mmio: [0, fffff] [ 1.159618] bus: 05 index 2 mmio: [0, fffff] [ 1.159620] bus: 05 index 3 mmio: [0, 0] [ 1.159622] bus: 06 index 0 mmio: [0, fff] [ 1.159624] bus: 06 index 1 mmio: [0, fffff] [ 1.159626] bus: 06 index 2 mmio: [0, fffff] [ 1.159628] bus: 06 index 3 mmio: [0, 0] [ 1.159630] bus: 07 index 0 io port: [2000, 2fff] [ 1.159633] bus: 07 index 1 mmio: [88000000, 880fffff] [ 1.159635] bus: 07 index 2 mmio: [88100000, 881fffff] [ 1.159637] bus: 07 index 3 mmio: [0, 0] [ 1.159640] bus: 08 index 0 mmio: [0, fff] [ 1.159642] bus: 08 index 1 mmio: [88200000, 882fffff] [ 1.159644] bus: 08 index 2 mmio: [0, fffff] [ 1.159646] bus: 08 index 3 mmio: [0, 0] [ 1.159648] bus: 0a index 0 mmio: [0, 0] [ 1.159650] bus: 0a index 1 mmio: [f0400000, f04fffff] [ 1.159653] bus: 0a index 2 mmio: [0, 0] [ 1.159655] bus: 0a index 3 io port: [0, ffff] [ 1.159657] bus: 0a index 4 mmio: [0, ffffffff] [ 1.159665] NET: Registered protocol family 2 [ 1.172052] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.172303] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.172686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.172893] TCP: Hash tables configured (established 131072 bind 65536) [ 1.172896] TCP reno registered [ 1.176073] NET: Registered protocol family 1 [ 1.176189] checking if image is initramfs... it is [ 1.951827] Freeing initrd memory: 8345k freed [ 1.952019] Simple Boot Flag at 0x36 set to 0x1 [ 1.952989] audit: initializing netlink socket (disabled) [ 1.953020] type=2000 audit(1232825340.952:1): initialized [ 1.959448] highmem bounce pool size: 64 pages [ 1.959455] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.961883] VFS: Disk quotas dquot_6.5.1 [ 1.961970] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.962072] msgmni has been set to 1743 [ 1.962196] io scheduler noop registered [ 1.962199] io scheduler anticipatory registered [ 1.962202] io scheduler deadline registered [ 1.962214] io scheduler cfq registered (default) [ 1.962229] pci 0000:00:02.0: Boot video device [ 1.962514] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.962570] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.962626] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.962666] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.962704] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.962822] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.962875] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.962927] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.962967] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.963007] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.963125] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.963179] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.963232] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.963273] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.963314] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.963432] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.963487] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.963539] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.963581] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.963622] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.963737] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.963792] pcieport-driver 0000:00:1c.4: found MSI capability [ 1.963844] pci_express 0000:00:1c.4:pcie00: allocate port service [ 1.963884] pci_express 0000:00:1c.4:pcie02: allocate port service [ 1.963922] pci_express 0000:00:1c.4:pcie03: allocate port service [ 1.964040] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.964094] pcieport-driver 0000:00:1c.5: found MSI capability [ 1.964147] pci_express 0000:00:1c.5:pcie00: allocate port service [ 1.964191] pci_express 0000:00:1c.5:pcie02: allocate port service [ 1.964232] pci_express 0000:00:1c.5:pcie03: allocate port service [ 1.964597] isapnp: Scanning for PnP cards... [ 2.318788] isapnp: No Plug & Play device found [ 2.352034] hpet_resources: 0xfed00000 is busy [ 2.352105] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.354323] brd: module loaded [ 2.354392] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.354510] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.358407] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.359729] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.359734] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.359737] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.359740] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.359742] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.360074] mice: PS/2 mouse device common for all mice [ 2.360234] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.360267] rtc0: alarms up to one month, y3k, hpet irqs [ 2.360394] EISA: Probing bus 0 at eisa.0 [ 2.360401] Cannot allocate resource for EISA slot 1 [ 2.360404] Cannot allocate resource for EISA slot 2 [ 2.360433] EISA: Detected 0 cards. [ 2.360436] cpuidle: using governor ladder [ 2.360439] cpuidle: using governor menu [ 2.360983] TCP cubic registered [ 2.361019] Using IPI No-Shortcut mode [ 2.361204] registered taskstats version 1 [ 2.361344] Magic number: 9:713:496 [ 2.361455] rtc_cmos 00:06: setting system clock to 2009-01-24 19:29:02 UTC (1232825342) [ 2.361459] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.361461] EDD information not available. [ 2.361708] Freeing unused kernel memory: 424k freed [ 2.361748] Write protecting the kernel text: 2580k [ 2.361776] Write protecting the kernel read-only data: 940k [ 2.388156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.524141] fuse init (API version 7.9) [ 2.564547] ACPI: SSDT 7F6D3C00, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20061109) [ 2.565090] ACPI: SSDT 7F6D3584, 05F7 (r1 PmRef Cpu0Cst 3001 INTL 20061109) [ 2.567860] Monitor-Mwait will be used to enter C-1 state [ 2.567863] Monitor-Mwait will be used to enter C-2 state [ 2.567866] Monitor-Mwait will be used to enter C-3 state [ 2.568069] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.568127] processor ACPI0007:00: registered as cooling_device0 [ 2.568132] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.568522] ACPI: SSDT 7F6D3DF6, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) [ 2.569018] ACPI: SSDT 7F6D3B7B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) [ 2.576001] Marking TSC unstable due to TSC halts in idle [ 2.600186] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.600236] processor ACPI0007:01: registered as cooling_device1 [ 2.600241] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.604636] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.606312] ACPI: Thermal Zone [THRM] (38 C) [ 2.979814] usbcore: registered new interface driver usbfs [ 2.979838] usbcore: registered new interface driver hub [ 2.979873] usbcore: registered new device driver usb [ 2.983236] USB Universal Host Controller Interface driver v3.0 [ 2.983281] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.983291] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.983295] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.983336] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.983376] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 2.983515] usb usb1: configuration #1 chosen from 1 choice [ 2.983544] hub 1-0:1.0: USB hub found [ 2.983551] hub 1-0:1.0: 2 ports detected [ 2.986960] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.064230] No dock devices found. [ 3.089985] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.089996] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.090000] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.090031] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.090072] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 3.090184] usb usb2: configuration #1 chosen from 1 choice [ 3.090213] hub 2-0:1.0: USB hub found [ 3.090220] hub 2-0:1.0: 2 ports detected [ 3.090587] SCSI subsystem initialized [ 3.118697] libata version 3.00 loaded. [ 3.196332] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.196351] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.196355] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.196387] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 3.200306] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.200314] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.200333] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704800 [ 3.213021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.213151] usb usb3: configuration #1 chosen from 1 choice [ 3.213189] hub 3-0:1.0: USB hub found [ 3.213197] hub 3-0:1.0: 4 ports detected [ 3.317338] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.317350] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.317355] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.317383] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.317425] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 3.317528] usb usb4: configuration #1 chosen from 1 choice [ 3.317558] hub 4-0:1.0: USB hub found [ 3.317566] hub 4-0:1.0: 2 ports detected [ 3.524437] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.524448] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.524453] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.524482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 3.524523] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 3.524625] usb usb5: configuration #1 chosen from 1 choice [ 3.524653] hub 5-0:1.0: USB hub found [ 3.524659] hub 5-0:1.0: 2 ports detected [ 3.732363] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.732373] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.732377] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.732404] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.732435] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 3.732526] usb usb6: configuration #1 chosen from 1 choice [ 3.732554] hub 6-0:1.0: USB hub found [ 3.732560] hub 6-0:1.0: 2 ports detected [ 3.836432] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.836449] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.836453] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.836478] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.840371] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.840379] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.840385] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704c00 [ 3.852126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.852262] usb usb7: configuration #1 chosen from 1 choice [ 3.852313] hub 7-0:1.0: USB hub found [ 3.852325] hub 7-0:1.0: 6 ports detected [ 4.000134] Clocksource tsc unstable (delta = -458277471 ns) [ 4.061677] ata_piix 0000:00:1f.1: version 2.12 [ 4.061689] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.061735] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 4.062632] scsi0 : ata_piix [ 4.062775] scsi1 : ata_piix [ 4.063614] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 4.063617] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 4.240567] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TO01, max UDMA/33 [ 4.272503] ata1.00: configured for UDMA/33 [ 4.272577] ata2: port disabled. ignoring. [ 4.275191] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TO01 PQ: 0 ANSI: 5 [ 4.275607] ahci 0000:00:1f.2: version 3.0 [ 4.275624] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.275742] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 4.275746] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 4.275753] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.275954] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.275963] sky2 0000:07:00.0: setting latency timer to 64 [ 4.275988] sky2 0000:07:00.0: v1.22 addr 0x88000000 irq 16 Yukon-2 Extreme rev 2 [ 4.276451] sky2 eth0: addr 00:1e:68:4a:53:85 [ 4.276465] scsi2 : ahci [ 4.276592] scsi3 : ahci [ 4.277090] scsi4 : ahci [ 4.277220] ata3: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704100 irq 217 [ 4.277224] ata4: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704180 irq 217 [ 4.277228] ata5: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704200 irq 217 [ 4.536256] usb 7-4: new high speed USB device using ehci_hcd and address 4 [ 4.707417] usb 7-4: configuration #1 chosen from 1 choice [ 4.932248] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.933088] ata3.00: _GTF unexpected object type 0x1 [ 4.948064] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 5.102920] usb 4-1: configuration #1 chosen from 1 choice [ 5.336627] ata3.00: ATA-8: TOSHIBA MK1246GSX, LB213M, max UDMA/100 [ 5.336635] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.337669] ata3.00: _GTF unexpected object type 0x1 [ 5.337850] ata3.00: configured for UDMA/100 [ 5.344240] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 5.505673] usb 4-2: configuration #1 chosen from 1 choice [ 5.507869] usbcore: registered new interface driver hiddev [ 5.520943] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input2 [ 5.522620] input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1 [ 5.522657] usbcore: registered new interface driver usbhid [ 5.522664] usbhid: v2.6:USB HID core driver [ 5.672250] ata4: SATA link down (SStatus 0 SControl 300) [ 6.012247] ata5: SATA link down (SStatus 0 SControl 300) [ 6.028394] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1246GS LB21 PQ: 0 ANSI: 5 [ 6.028605] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.079334] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 6.092237] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 6.092279] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 6.107599] Driver 'sd' needs updating - please use bus_type methods [ 6.107722] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 6.107739] sd 2:0:0:0: [sda] Write Protect is off [ 6.107742] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.107769] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.107834] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 6.107849] sd 2:0:0:0: [sda] Write Protect is off [ 6.107852] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.107879] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.107882] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 6.133498] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.133505] Uniform CD-ROM driver Revision: 3.20 [ 6.133651] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.197830] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 6.248631] sd 2:0:0:0: [sda] Attached SCSI disk [ 6.757617] PM: Starting manual resume from disk [ 6.757621] PM: Resume from partition 8:7 [ 6.757623] PM: Checking hibernation image. [ 6.757795] PM: Resume from disk failed. [ 6.798689] kjournald starting. Commit interval 5 seconds [ 6.798717] EXT3-fs: mounted filesystem with ordered data mode. [ 7.353219] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240000db55c6] [ 13.825414] udevd version 124 started [ 14.300159] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.392171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.540143] Linux agpgart interface v0.103 [ 14.568164] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 14.568683] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 14.584191] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 14.632214] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 14.656060] ACPI: Power Button (FF) [PWRF] [ 15.215510] ACPI: Battery Slot [BAT1] (battery present) [ 15.215649] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 15.215775] ACPI: Lid Switch [LID] [ 15.215836] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 15.236037] ACPI: Power Button (CM) [PWRB] [ 15.238146] ACPI: AC Adapter [ACAD] (off-line) [ 15.241511] acpi device:03: registered as cooling_device2 [ 15.244333] acpi device:04: registered as cooling_device3 [ 15.246426] acpi device:05: registered as cooling_device4 [ 15.249556] acpi device:06: registered as cooling_device5 [ 15.251655] acpi device:07: registered as cooling_device6 [ 15.251795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6 [ 15.272035] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.272264] ACPI: WMI: Mapper loaded [ 15.302475] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 15.302479] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 15.302559] iwl3945 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.302574] iwl3945 0000:08:00.0: setting latency timer to 64 [ 15.302598] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 15.463713] iTCO_vendor_support: vendor-support=0 [ 15.471668] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 15.472168] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 15.585533] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 15.585939] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 15.586041] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.629908] Linux video capture interface: v2.00 [ 15.707704] sdhci: Secure Digital Host Controller Interface driver [ 15.707708] sdhci: Copyright(c) Pierre Ossman [ 15.765021] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 15.810955] iwl3945 0000:08:00.0: PCI INT A disabled [ 15.811017] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) [ 15.811035] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.811058] mmc0: Unknown controller version (2). You may experience problems. [ 15.811108] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA [ 15.813708] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070) [ 15.815258] input: CNF7051 as /devices/pci0000:00/0000:00:1d.7/usb7/7-4/7-4:1.0/input/input8 [ 15.839144] usbcore: registered new interface driver uvcvideo [ 15.839163] USB Video Class driver (v0.1.0) [ 15.896450] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.896483] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.026448] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input9 [ 16.072624] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10 [ 17.859607] lp: driver loaded but no devices found [ 18.017042] Adding 2120540k swap on /dev/sda7. Priority:-1 extents:1 across:2120540k [ 18.042917] EXT3 FS on sda5, internal journal [ 18.251835] device-mapper: uevent: version 1.0.3 [ 18.251996] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 18.502404] kjournald starting. Commit interval 5 seconds [ 18.502437] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 18.502584] EXT3 FS on sda6, internal journal [ 18.502593] EXT3-fs: mounted filesystem with ordered data mode. [ 19.050725] type=1505 audit(1232805559.371:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4415 [ 19.050941] type=1505 audit(1232805559.371:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4415 [ 19.223457] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.268826] sky2 eth0: enabling interface [ 19.744247] NET: Registered protocol family 10 [ 19.744799] lo: Disabled Privacy Extensions [ 19.745431] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.817410] PPP generic driver version 2.4.2 [ 19.847319] NET: Registered protocol family 17 [ 19.899319] iwl3945 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.899470] iwl3945 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 19.899749] firmware: requesting iwlwifi-3945-1.ucode [ 20.002827] Registered led device: iwl-phy0:radio [ 20.002903] Registered led device: iwl-phy0:assoc [ 20.002934] Registered led device: iwl-phy0:RX [ 20.002965] Registered led device: iwl-phy0:TX [ 20.006634] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.631949] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 21.726320] apm: BIOS not found. [ 21.866606] ppdev: user-space parallel port driver [ 22.276309] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 22.276707] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.427705] Bluetooth: Core ver 2.13 [ 24.428415] NET: Registered protocol family 31 [ 24.428423] Bluetooth: HCI device and connection manager initialized [ 24.428429] Bluetooth: HCI socket layer initialized [ 24.463584] Bluetooth: L2CAP ver 2.11 [ 24.463593] Bluetooth: L2CAP socket layer initialized [ 24.493097] Bluetooth: SCO (Voice Link) ver 0.6 [ 24.493107] Bluetooth: SCO socket layer initialized [ 24.511918] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.511924] Bluetooth: BNEP filters: protocol multicast [ 24.560200] Bridge firewalling registered [ 24.580485] Bluetooth: RFCOMM socket layer initialized [ 24.580498] Bluetooth: RFCOMM TTY layer initialized [ 24.580501] Bluetooth: RFCOMM ver 1.10 [ 25.018552] NET: Registered protocol family 24 [ 27.077085] [drm] Initialized drm 1.1.0 20060810 [ 27.084241] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 27.084254] pci 0000:00:02.0: setting latency timer to 64 [ 27.086627] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 32.577013] eth0: no IPv6 routers present
Thanks for helping out.Code:2.6.27-11-generic
- 01-24-2009 #12Linux Guru
- Join Date
- Jul 2004
- Location
- Franklin, Wisconsin
- Posts
- 4,590
Thank you.
Well here is the wireless:
And it is loading the proper driver modules:Code:08:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
This wireless needs firmware that it loads upon initialization. It seems to be doing that:Code:Module Size Used by iwl3945 98804 0 rfkill 17176 2 iwl3945 mac80211 216820 1 iwl3945 cfg80211 32392 2 iwl3945,mac80211
It is normal for a wireless to not be ready at boot. First, there usually is a password needed for a connection.Code:[ 15.302475] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 15.302479] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 15.302559] iwl3945 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.302574] iwl3945 0000:08:00.0: setting latency timer to 64 [ 15.302598] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 15.463713] iTCO_vendor_support: vendor-support=0 [ 15.471668] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 15.472168] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 15.810955] iwl3945 0000:08:00.0: PCI INT A disabled [ 19.899319] iwl3945 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.899470] iwl3945 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 19.899749] firmware: requesting iwlwifi-3945-1.ucode [ 20.002827] Registered led device: iwl-phy0:radio [ 20.002903] Registered led device: iwl-phy0:assoc [ 20.002934] Registered led device: iwl-phy0:RX [ 20.002965] Registered led device: iwl-phy0:TX [ 20.006634] ADDRCONF(NETDEV_UP): wlan0: link is not ready
It is requesting the firmware to upload, but I don't see a confirming response, saying that it was uploaded. You could check that you actually have the firmware file iwlwifi-3945-1.ucode. It should be in the /lib/firmware/2.6.27-11-generic folder. If it isn't there, or if you want to try the latest version, you can get it here:
http://intellinuxwireless.org/iwlwif...-15.28.1.8.tgz
The other thing to check, is there a on/off switch or key combination for the wireless. It may just be disabled. Run this command and see if it outputs anything:
It should output a 0 or 1:Code:cat /sys/class/rfkill/rfkill0/state
0 = off
1 = on
If it outputs a 0, try to change it with this command:
After changing the state, you have to cycle it from active to inactive back to active.Code:echo 1 > /sys/class/rfkill/rfkill0/state
Hope some of this helps.Code:ifdown wlan0 ifup wlan0
Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 01-27-2009 #13Just Joined!
- Join Date
- Jan 2009
- Posts
- 11
Thank you for the detailed instructions.
There was no such file. I downloaded it and copied it to the mentioned folder. Rebooted, but still no wifi signals.
Originally Posted by waterhead 
Its "on" already.The other thing to check, is there a on/off switch or key combination for the wireless. It may just be disabled. Run this command and see if it outputs anything:
It should output a 0 or 1:Code:cat /sys/class/rfkill/rfkill0/state
0 = off
1 = on
I also tried disabling the WPA security of the wifi router - still no luck.
Thanks.
- 01-27-2009 #14Linux Guru
- Join Date
- Jul 2004
- Location
- Franklin, Wisconsin
- Posts
- 4,590
The firmware file that I linked to is a compressed file. You need to unpack it first, then move the iwlwifi-3945-1.ucode file to the correct folder.
Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 01-27-2009 #15Just Joined!
- Join Date
- Jan 2009
- Posts
- 11
Ofcourse, I unpacked it first. I am LAMP programmer and know my way around Originally Posted by waterhead 
.
Thanks.
- 01-27-2009 #16Linux Guru
- Join Date
- Jul 2004
- Location
- Franklin, Wisconsin
- Posts
- 4,590
OK,
.
I just wanted to make sure, we get users at all different experience levels.
Try connecting by selecting the option to connect to a hidden network, or create a new wireless network. I can't think of anything else to try, except to uninstall and reinstall the driver.Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 01-28-2009 #17Just Joined!
- Join Date
- Jan 2009
- Posts
- 11
I got it working!
What i did is installed wicd (alternative to kubuntu's network-manager) and removed the default network-manager package. When i started wicd it detected the wireless network and i was able to connect.
I also rebooted the system after that just to make sure that configuration sticks.
I did not touched the drivers at all.
Thanks waterhead for all the help.
- 01-28-2009 #18Linux Guru
- Join Date
- Jul 2004
- Location
- Franklin, Wisconsin
- Posts
- 4,590
I've heard good things about wicd, I'll have to give it a try.
I am trying out RHEL 5, and it doesn't have the NetworkManager tray applet. And I don't have a licensed version, so I can't use YUM to install it. I'll try it on that.Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 01-29-2009 #19Just Joined!
- Join Date
- Jan 2009
- Posts
- 50
Have you tried editing (as root or sudo) /etc/NetworkManager/nm-system-settings.conf and change the
[ifupdown]
managed=false
change that to true and restart. Thats what worked for me. assuming you are using ndiswrapper or ndisgtk (which i used) and it says hardware is present. I had the same problem as you. changing that to true lets networkmanager user the wireless.
- 01-29-2009 #20Just Joined!
- Join Date
- Jan 2009
- Posts
- 11
No - I didn't tried that. I am not using ndiswrapper or ndisgtk (i might be wrong here) as the wifi card (driver) worked out of the box. I didn't do anything special to make the card work. Originally Posted by kr0nik
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
