niranjan61

I read many relevant forum and tried each step by step non work, please help me,
I attached all output as required,

niranjan@niranjan-laptop:~$ lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f]
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
14:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
1a:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
1a:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
1a:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
1a:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
niranjan@niranjan-laptop:~$

niranjan@niranjan-laptop:~$ lsmod
Module Size Used by
xt_limit 4608 8
xt_tcpudp 4992 7
ipt_LOG 8192 8
ipt_MASQUERADE 5504 0
ipt_TOS 3712 0
ipt_REJECT 6528 1
nf_conntrack_irc 8992 0
nf_conntrack_ftp 11688 0
xt_state 4096 6
af_packet 27272 2
binfmt_misc 14860 1
radeon 131360 0
drm 105896 1 radeon
rfcomm 47392 2
l2cap 28800 13 rfcomm
bluetooth 67620 4 rfcomm,l2cap
ppdev 11400 0
ipv6 311848 22
powernow_k8 16608 1
cpufreq_conservative 10632 0
cpufreq_stats 8416 0
cpufreq_userspace 6180 0
cpufreq_ondemand 11152 1
freq_table 6464 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 3200 0
sbs 17808 0
dock 12960 0
container 6656 0
sbshc 8960 1 sbs
aes_x86_64 26920 0
dm_crypt 16776 0
dm_mod 71160 1 dm_crypt
sbp2 27272 0
parport_pc 41128 0
lp 14916 0
parport 44300 3 ppdev,parport_pc,lp
joydev 15488 0
pcmcia 45976 0
snd_hda_intel 442200 3
snd_pcm_oss 47648 0
snd_mixer_oss 20224 2 snd_pcm_oss
snd_pcm 92168 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 13200 2 snd_hda_intel,snd_pcm
snd_hwdep 12552 1 snd_hda_intel
snd_seq_dummy 5764 0
snd_seq_oss 38912 0
snd_seq_midi 10688 0
snd_rawmidi 29856 1 snd_seq_midi
snd_seq_midi_event 10112 2 snd_seq_oss,snd_seq_midi
snd_seq 63232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 27912 2 snd_pcm,snd_seq
snd_seq_device 10644 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
uvcvideo 62212 0
snd 70856 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_ seq,snd_timer,snd_seq_device
compat_ioctl32 11136 1 uvcvideo
yenta_socket 30092 1
videodev 30720 1 uvcvideo
sdhci 21508 0
tifm_7xx1 9984 0
psmouse 46236 0
v4l1_compat 15492 2 uvcvideo,videodev
v4l2_common 21888 3 uvcvideo,compat_ioctl32,videodev
evdev 14976 9
rsrc_nonstatic 14080 1 yenta_socket
serio_raw 9092 0
soundcore 10400 2 snd
pcspkr 4992 0
k8temp 7680 0
tifm_core 13064 1 tifm_7xx1
mmc_core 59272 1 sdhci
i2c_piix4 11148 0
pcmcia_core 46116 3 pcmcia,yenta_socket,rsrc_nonstatic
ndiswrapper 243872 0
i2c_core 28544 1 i2c_piix4
battery 16776 0
video 23444 0
output 5632 1 video
ac 8328 0
button 10912 0
shpchp 38172 0
pci_hotplug 34608 1 shpchp
iptable_nat 9604 0
nf_nat 23980 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 21904 8 iptable_nat
nf_conntrack 79216 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,x t_state,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_mangle 4480 0
iptable_filter 4608 1
ip_tables 24104 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 23560 9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS, ipt_REJECT,xt_state,iptable_nat,ip_tables
ext3 149264 1
jbd 57000 1 ext3
mbcache 11392 1 ext3
ide_cd 35488 0
cdrom 41512 1 ide_cd
pata_atiixp 10496 0
pata_acpi 9856 0
ata_generic 9988 0
usbhid 35680 0
hid 44992 1 usbhid
sg 41880 0
sd_mod 33280 3
ohci1394 36532 0
ieee1394 106968 2 sbp2,ohci1394
atiixp 6672 0 [permanent]
ide_core 136600 2 ide_cd,atiixp
ehci_hcd 41996 0
ohci_hcd 28956 0
usbcore 170288 6 uvcvideo,ndiswrapper,usbhid,ehci_hcd,ohci_hcd
ahci 33284 2
r8169 36868 0
libata 176560 4 pata_atiixp,pata_acpi,ata_generic,ahci
scsi_mod 178488 4 sbp2,sg,sd_mod,libata
thermal 19744 0
processor 40424 2 powernow_k8,thermal
fan 6792 0
fbcon 46336 0
tileblit 4096 1 fbcon
font 10112 1 fbcon
bitblit 7424 1 fbcon
softcursor 3712 1 bitblit
fuse 56112 3
niranjan@niranjan-laptop:~$

niranjan@niranjan-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Jan 26 01:04:16 UTC 2009 (Ubuntu 2.6.24-23.48-generic)
[ 0.000000] Command line: root=UUID=ab2d62fb-98b2-4fc2-88c5-6da0ae6ef53c ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077e70000 (usable)
[ 0.000000] BIOS-e820: 0000000077e70000 - 0000000077e83000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077e83000 - 0000000077e85000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077e85000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 491120) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7260 checksum 0
[ 0.000000] ACPI: RSDP 000F7260, 0024 (r2 TOSCPL)
[ 0.000000] ACPI: XSDT 77E7AA4D, 0064 (r1 TOSCPL TOSCPL00 6040000 LTP 0)
[ 0.000000] ACPI: FACP 77E82939, 00F4 (r3 TOSCPL Herring 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 77E7AAB1, 7E88 (r1 TOSCPL SB600 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 77E84FC0, 0040
[ 0.000000] ACPI: TCPA 77E82AA1, 0032 (r2 TOSCPL 6040000 PTEC 0)
[ 0.000000] ACPI: SLIC 77E82AD3, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0)
[ 0.000000] ACPI: SSDT 77E82C49, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 77E82E0D, 0054 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 77E82E61, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET 77E82E9D, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: ASF! 77E82ED5, 012B (r32 DMA AMDTBL 6040000 PTL 1)
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077e70000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 491120) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000077e70000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 491120
[ 0.000000] On node 0 totalpages: 491021
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1221 pages reserved
[ 0.000000] DMA zone: 2720 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6658 pages used for memmap
[ 0.000000] DMA32 zone: 480366 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 483086
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=ab2d62fb-98b2-4fc2-88c5-6da0ae6ef53c ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 56.997285] Marking TSC unstable due to TSCs unsynchronized
[ 56.997287] time.c: Detected 1795.509 MHz processor.
[ 56.998053] Console: colour VGA+ 80x25
[ 56.998057] console [tty0] enabled
[ 56.998075] Checking aperture...
[ 56.998078] CPU 0: aperture @ 703a000000 size 32 MB
[ 56.998080] Aperture too small (32 MB)
[ 57.008122] No AGP bridge found
[ 57.026723] Memory: 1924148k/1964480k available (2492k kernel code, 39936k reserved, 1316k data, 320k init)
[ 57.026760] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 57.103378] Calibrating delay using timer specific routine.. 3668.35 BogoMIPS (lpj=7336716)
[ 57.103411] Security Framework initialized
[ 57.103418] SELinux: Disabled at boot.
[ 57.103432] AppArmor: AppArmor initialized
[ 57.103436] Failure registering capabilities with primary security module.
[ 57.103610] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 57.104811] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 57.105369] Mount-cache hash table entries: 256
[ 57.105505] Initializing cgroup subsys ns
[ 57.105509] Initializing cgroup subsys cpuacct
[ 57.105524] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 57.105526] CPU: L2 Cache: 512K (64 bytes/line)
[ 57.105529] CPU 0/0 -> Node 0
[ 57.105531] CPU: Physical Processor ID: 0
[ 57.105532] CPU: Processor Core ID: 0
[ 57.105557] SMP alternatives: switching to UP code
[ 57.106213] Early unpacking initramfs... done
[ 57.481952] ACPI: Core revision 20070126
[ 57.482024] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 58.563446] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 58.604328] Using local APIC timer interrupts.
[ 58.659996] APIC timer calibration result 12468802
[ 58.659998] Detected 12.468 MHz APIC timer.
[ 58.660104] SMP alternatives: switching to SMP code
[ 58.660635] Booting processor 1/2 APIC 0x1
[ 58.671369] Initializing CPU#1
[ 58.748389] Calibrating delay using timer specific routine.. 3591.07 BogoMIPS (lpj=7182148)
[ 58.748396] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 58.748398] CPU: L2 Cache: 512K (64 bytes/line)
[ 58.748400] CPU 1/1 -> Node 0
[ 58.748402] CPU: Physical Processor ID: 0
[ 58.748404] CPU: Processor Core ID: 1
[ 58.748514] AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 01
[ 58.748529] AMD C1E detected late. Force timer broadcast.
[ 58.748176] Brought up 2 CPUs
[ 58.748259] CPU0 attaching sched-domain:
[ 58.748262] domain 0: span 03
[ 58.748264] groups: 01 02
[ 58.748267] domain 1: span 03
[ 58.748269] groups: 03
[ 58.748271] CPU1 attaching sched-domain:
[ 58.748273] domain 0: span 03
[ 58.748275] groups: 02 01
[ 58.748278] domain 1: span 03
[ 58.748280] groups: 03
[ 58.748539] net_namespace: 120 bytes
[ 58.748971] Time: 23:48:32 Date: 02/21/09
[ 58.749008] NET: Registered protocol family 16
[ 58.749221] ACPI: bus type pci registered
[ 58.749306] PCI: Using configuration type 1
[ 58.750721] ACPI: EC: Look up EC in DSDT
[ 58.752660] ACPI Error (evregion-0316): No handler for Region [ERAM] (ffff81007409c180) [EmbeddedControl] [20070126]
[ 58.752666] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126]
[ 58.752671] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126]
[ 58.752676] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.HTEV] (Node ffff8100740955a0), AE_NOT_EXIST
[ 58.752719] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff81007409d940), AE_NOT_EXIST
[ 58.754054] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 58.758149] ACPI: Interpreter enabled
[ 58.758151] ACPI: (supports S0 S3 S4 S5)
[ 58.758167] ACPI: Using IOAPIC for interrupt routing
[ 58.760626] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 58.821499] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
[ 58.821501] ACPI: EC: driver started in interrupt mode
[ 58.821547] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 58.821755] pci 0000:00:12.0: set SATA to AHCI mode
[ 58.823169] PCI: Transparent bridge - 0000:00:14.4
[ 58.823246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 58.823491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 58.823649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 58.823801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 58.823957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 58.824128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 58.824293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 58.829362] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 58.829522] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 58.829680] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 58.829837] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 58.829994] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 58.830151] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 58.830307] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 58.830464] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 58.830623] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 58.830660] pnp: PnP ACPI init
[ 58.830668] ACPI: bus type pnp registered
[ 58.856672] pnp: PnP ACPI: found 11 devices
[ 58.856674] ACPI: ACPI bus type pnp unregistered
[ 58.856965] PCI: Using ACPI for IRQ routing
[ 58.856967] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 58.856974] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 58.856976] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 58.876481] NET: Registered protocol family 8
[ 58.876483] NET: Registered protocol family 20
[ 58.876586] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 58.876590] hpet0: 4 32-bit timers, 14318180 Hz
[ 58.877655] AppArmor: AppArmor Filesystem Enabled
[ 58.880041] Time: hpet clocksource has been installed.
[ 58.880046] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 58.880482] Could not switch to high resolution mode on CPU 1
[ 58.880055] lapic is not functional.
[ 58.880057] Could not switch to high resolution mode on CPU 0
[ 58.888515] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 58.888518] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 58.888527] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 58.888530] system 00:08: ioport range 0x220-0x22f has been reserved
[ 58.888533] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 58.888536] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 58.888538] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 58.888540] system 00:08: ioport range 0x530-0x537 has been reserved
[ 58.888543] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 58.888546] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 58.888548] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 58.888551] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 58.888553] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 58.888556] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[ 58.888558] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[ 58.888561] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 58.888564] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 58.888566] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 58.888569] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 58.888572] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 58.888574] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 58.888577] system 00:08: ioport range 0xfd60-0xfddf has been reserved
[ 58.888584] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 58.888587] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 58.888590] system 00:09: iomem range 0x0-0x0 could not be reserved
[ 58.889115] PCI: Bridge: 0000:00:01.0
[ 58.889117] IO window: 9000-9fff
[ 58.889120] MEM window: f8000000-f81fffff
[ 58.889122] PREFETCH window: f0000000-f7ffffff
[ 58.889125] PCI: Bridge: 0000:00:05.0
[ 58.889126] IO window: disabled.
[ 58.889128] MEM window: disabled.
[ 58.889131] PREFETCH window: disabled.
[ 58.889134] PCI: Bridge: 0000:00:06.0
[ 58.889135] IO window: a000-afff
[ 58.889138] MEM window: f8300000-f83fffff
[ 58.889140] PREFETCH window: 88000000-880fffff
[ 58.889143] PCI: Bridge: 0000:00:07.0
[ 58.889144] IO window: disabled.
[ 58.889146] MEM window: f8200000-f82fffff
[ 58.889148] PREFETCH window: disabled.
[ 58.889156] PCI: Bus 27, cardbus bridge: 0000:1a:04.0
[ 58.889158] IO window: 00001400-000014ff
[ 58.889165] IO window: 00001800-000018ff
[ 58.889170] PREFETCH window: 8c000000-8fffffff
[ 58.889175] MEM window: 90000000-93ffffff
[ 58.889179] PCI: Bridge: 0000:00:14.4
[ 58.889180] IO window: disabled.
[ 58.889186] MEM window: f8400000-f84fffff
[ 58.889189] PREFETCH window: disabled.
[ 58.889209] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 58.889217] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 58.889224] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 58.889249] ACPI: PCI Interrupt 0000:1a:04.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 58.889333] NET: Registered protocol family 2
[ 58.936577] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 58.937511] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 58.939725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 58.940291] TCP: Hash tables configured (established 262144 bind 65536)
[ 58.940294] TCP reno registered
[ 58.952604] checking if image is initramfs... it is
[ 59.665922] Freeing initrd memory: 7993k freed
[ 59.671228] audit: initializing netlink socket (disabled)
[ 59.671240] audit(1235260111.556:1): initialized
[ 59.673644] VFS: Disk quotas dquot_6.5.1
[ 59.673733] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 59.673885] io scheduler noop registered
[ 59.673887] io scheduler anticipatory registered
[ 59.673889] io scheduler deadline registered
[ 59.674007] io scheduler cfq registered (default)
[ 59.676075] Boot video device is 0000:01:05.0
[ 59.676286] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 59.676306] assign_interrupt_mode Found MSI capability
[ 59.676328] Allocate Port Service[0000:00:05.0:pcie00]
[ 59.676380] Allocate Port Service[0000:00:05.0:pcie02]
[ 59.676445] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 59.676464] assign_interrupt_mode Found MSI capability
[ 59.676482] Allocate Port Service[0000:00:06.0:pcie00]
[ 59.676549] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 59.676568] assign_interrupt_mode Found MSI capability
[ 59.676586] Allocate Port Service[0000:00:07.0:pcie00]
[ 59.709064] Real Time Clock Driver v1.12ac
[ 59.709360] hpet_resources: 0xfed00000 is busy
[ 59.709384] Linux agpgart interface v0.102
[ 59.709387] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 59.710629] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 59.710707] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 59.710816] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 59.745531] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 59.745538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 59.759622] mice: PS/2 mouse device common for all mice
[ 59.759663] cpuidle: using governor ladder
[ 59.759665] cpuidle: using governor menu
[ 59.759829] NET: Registered protocol family 1
[ 59.759943] registered taskstats version 1
[ 59.760098] Magic number: 13:780:858
[ 59.760190] hash matches device ptysd
[ 59.760244] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 59.760247] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 59.760249] EDD information not available.
[ 59.760257] Freeing unused kernel memory: 320k freed
[ 59.760728] Write protecting the kernel read-only data: 1036k
[ 59.779439] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 61.007384] fuse init (API version 7.9)
[ 61.026614] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 61.304112] SCSI subsystem initialized
[ 61.313388] libata version 3.00 loaded.
[ 61.314545] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 61.314579] ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 61.314602] PCI: Setting latency timer of device 0000:0e:00.0 to 64
[ 61.314899] eth0: RTL8101e at 0xffffc200008c0000, 00:1b:38:1c:ac:96, XID 34200000 IRQ 508
[ 61.325336] ahci 0000:00:12.0: version 3.0
[ 61.325372] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 61.325581] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 61.325588] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
[ 61.338688] usbcore: registered new interface driver usbfs
[ 61.338715] usbcore: registered new interface driver hub
[ 61.338748] usbcore: registered new device driver usb
[ 61.339888] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 61.451556] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 61.451564] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 62.326152] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 62.326158] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
[ 62.327297] scsi0 : ahci
[ 62.327614] scsi1 : ahci
[ 62.327777] scsi2 : ahci
[ 62.327936] scsi3 : ahci
[ 62.328031] ata1: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709100 irq 22
[ 62.328035] ata2: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709180 irq 22
[ 62.328038] ata3: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709200 irq 22
[ 62.328042] ata4: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709280 irq 22
[ 62.802287] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 62.802826] ata1.00: ATA-8: FUJITSU MHX2250BT, 0040000C, max UDMA/100
[ 62.802829] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 62.803487] ata1.00: configured for UDMA/100
[ 63.114105] ata2: SATA link down (SStatus 0 SControl 300)
[ 63.425928] ata3: SATA link down (SStatus 0 SControl 300)
[ 63.737753] ata4: SATA link down (SStatus 0 SControl 300)
[ 63.737454] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0040 PQ: 0 ANSI: 5
[ 63.738373] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 63.738570] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 63.738852] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 63.738879] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8704000
[ 63.746723] Driver 'sd' needs updating - please use bus_type methods
[ 63.754282] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 63.754296] sd 0:0:0:0: [sda] Write Protect is off
[ 63.754299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 63.754316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 63.754368] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 63.754378] sd 0:0:0:0: [sda] Write Protect is off
[ 63.754381] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 63.754396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 63.754400] sda:<6>usb usb1: configuration #1 chosen from 1 choice
[ 63.793893] hub 1-0:1.0: USB hub found
[ 63.793906] hub 1-0:1.0: 2 ports detected
[ 63.835556] sda1 sda2 sda3 < sda5 sda6 >
[ 63.884018] sd 0:0:0:0: [sda] Attached SCSI disk
[ 63.888700] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 63.897785] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 63.897989] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 63.898056] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 63.898082] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8705000
[ 63.953810] usb usb2: configuration #1 chosen from 1 choice
[ 63.953836] hub 2-0:1.0: USB hub found
[ 63.953852] hub 2-0:1.0: 2 ports detected
[ 64.057673] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 64.057879] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 64.057945] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 64.057970] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8706000
[ 64.113685] usb usb3: configuration #1 chosen from 1 choice
[ 64.113713] hub 3-0:1.0: USB hub found
[ 64.113726] hub 3-0:1.0: 2 ports detected
[ 64.209050] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 64.217585] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 64.217792] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 64.217858] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 64.217880] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8707000
[ 64.273589] usb usb4: configuration #1 chosen from 1 choice
[ 64.273616] hub 4-0:1.0: USB hub found
[ 64.273629] hub 4-0:1.0: 2 ports detected
[ 64.377450] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[ 64.377652] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 64.377724] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 64.377746] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8708000
[ 64.425475] usb 1-1: configuration #1 chosen from 1 choice
[ 64.433447] usb usb5: configuration #1 chosen from 1 choice
[ 64.433468] hub 5-0:1.0: USB hub found
[ 64.433479] hub 5-0:1.0: 2 ports detected
[ 64.537120] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
[ 64.537136] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 64.537147] SB600_PATA: not 100% native mode: will probe irqs later
[ 64.537155] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio
[ 64.537166] Probing IDE interface ide0...
[ 64.741176] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 64.962197] usb 4-1: configuration #1 chosen from 1 choice
[ 65.276875] usb 4-2: new full speed USB device using ohci_hcd and address 3
[ 65.507891] usb 4-2: configuration #1 chosen from 1 choice
[ 65.516818] usbcore: registered new interface driver hiddev
[ 65.521990] input: HID 0566:3002 as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input2
[ 65.544788] input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:13.0-1
[ 65.557838] input: HID 0566:3002 as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input3
[ 65.572759] input,hiddev96,hidraw1: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:13.0-1
[ 65.577958] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:13.3/usb4/4-1/4-1:1.0/input/input4
[ 65.596726] input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.3-1
[ 65.596746] usbcore: registered new interface driver usbhid
[ 65.596750] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 65.608630] hda: PIONEER DVD-RW DVR-K17LF, ATAPI CD/DVD-ROM drive
[ 65.608670] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 67.507668] hda: UDMA/33 mode selected
[ 67.510523] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 67.524700] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[ 67.524901] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 67.524968] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 67.525014] ehci_hcd 0000:00:13.5: debug port 1
[ 67.525031] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8709400
[ 67.525086] usb 4-1: USB disconnect, address 2
[ 67.535606] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 67.535753] usb usb6: configuration #1 chosen from 1 choice
[ 67.535779] hub 6-0:1.0: USB hub found
[ 67.535786] hub 6-0:1.0: 10 ports detected
[ 67.639799] ACPI: PCI Interrupt 0000:1a:04.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 67.689935] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8406000-f84067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 67.689984] usb 4-2: USB disconnect, address 3
[ 67.708322] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache
[ 67.708330] Uniform CD-ROM driver Revision: 3.20
[ 67.829899] Attempting manual resume
[ 67.829903] swsusp: Resume From Partition 8:6
[ 67.829905] PM: Checking swsusp image.
[ 67.830107] PM: Resume from disk failed.
[ 67.844509] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 67.844514] EXT3-fs: write access will be enabled during recovery.
[ 68.423110] usb 6-8: new high speed USB device using ehci_hcd and address 4
[ 68.569475] usb 6-8: configuration #1 chosen from 1 choice
[ 69.034755] usb 4-1: new low speed USB device using ohci_hcd and address 4
[ 69.118815] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f77c0410f07]
[ 69.255825] usb 4-1: configuration #1 chosen from 1 choice
[ 69.263948] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:13.3/usb4/4-1/4-1:1.0/input/input5
[ 69.286688] input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.3-1
[ 69.286783] usb 1-1: USB disconnect, address 2
[ 69.642414] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 69.857500] usb 1-1: configuration #1 chosen from 1 choice
[ 69.865621] input: HID 0566:3002 as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input6
[ 69.894336] input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:13.0-1
[ 69.907452] input: HID 0566:3002 as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input7
[ 69.926346] input,hiddev96,hidraw1: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:13.0-1
[ 77.420454] kjournald starting. Commit interval 5 seconds
[ 77.420476] EXT3-fs: recovery complete.
[ 77.421187] EXT3-fs: mounted filesystem with ordered data mode.
[ 89.595948] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 89.643387] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 90.155717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 90.175420] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.247099] input: Power Button (FF) as /devices/virtual/input/input8
[ 90.278771] ACPI: Power Button (FF) [PWRF]
[ 90.278872] input: Lid Switch as /devices/virtual/input/input9
[ 90.278968] ACPI: Lid Switch [LID]
[ 90.279021] input: Power Button (CM) as /devices/virtual/input/input10
[ 90.302770] ACPI: Power Button (CM) [PWRB]
[ 90.488347] ACPI: AC Adapter [ACAD] (on-line)
[ 90.627066] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input11
[ 90.650185] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 90.650692] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:25/LNXVIDEO:01/input/input12
[ 90.682183] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 90.822884] ACPI: Battery Slot [BAT1] (battery present)
[ 91.280531] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[ 91.551702] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 91.898470] ndiswrapper (check_nt_hdr:150): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B
[ 91.898477] ndiswrapper (load_sys_files:210): couldn't prepare driver 'net5211'
[ 91.902801] ndiswrapper (load_wrap_driver:112): couldn't load driver net5211; check system log for messages from 'loadndisdriver'
[ 91.902849] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 91.936737] ACPI: PCI Interrupt 0000:1a:04.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 91.951662] sdhci: Secure Digital Host Controller Interface driver
[ 91.951667] sdhci: Copyright(c) Pierre Ossman
[ 91.951712] sdhci: SDHCI controller found at 0000:1a:04.3 [104c:803c] (rev 0)
[ 91.951741] ACPI: PCI Interrupt 0000:1a:04.3[C] -> GSI 22 (level, low) -> IRQ 22
[ 91.952034] mmc0: SDHCI at 0xf8406800 irq 22 DMA
[ 91.955781] usbcore: registered new interface driver ndiswrapper
[ 91.992132] Linux video capture interface: v2.00
[ 92.002623] Yenta: CardBus bridge found at 0000:1a:04.0 [1179:ff00]
[ 92.002650] Yenta: Enabling burst memory read transactions
[ 92.002656] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 92.002658] Yenta: Routing CardBus interrupts to PCI
[ 92.002664] Yenta TI: socket 0000:1a:04.0, mfunc 0x10a01b22, devctl 0x64
[ 92.129231] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 92.131336] usbcore: registered new interface driver uvcvideo
[ 92.131340] USB Video Class driver (v0.1.0)
[ 92.234517] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 92.234523] Socket status: 30000006
[ 92.234527] Yenta: Raising subordinate bus# of parent bus (#1a) from #1b to #1e
[ 92.234532] pcmcia: parent PCI bridge Memory window: 0xf8400000 - 0xf84fffff
[ 92.497738] input: PS/2 Mouse as /devices/virtual/input/input14
[ 92.528344] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 92.567155] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 92.577059] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input15
[ 94.454882] lp: driver loaded but no devices found
[ 94.637876] Adding 2241028k swap on /dev/sda6. Priority:-1 extents:1 across:2241028k
[ 95.192575] EXT3 FS on sda5, internal journal
[ 95.341457] device-mapper: uevent: version 1.0.3
[ 95.341493] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 97.573655] No dock devices found.
[ 97.886159] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (2 cpu cores) (version 2.20.00)
[ 97.885836] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13
[ 97.885841] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
[ 97.885844] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e
[ 114.804780] NET: Registered protocol family 10
[ 114.805333] lo: Disabled Privacy Extensions
[ 119.639909] ppdev: user-space parallel port driver
[ 119.799705] audit(1235281773.603:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5902 profile="/usr/sbin/cupsd" namespace="default"
[ 134.438020] Clocksource tsc unstable (delta = -135569555 ns)
[ 136.045521] r8169: eth0: link up
[ 136.045531] r8169: eth0: link up
[ 136.142505] Bluetooth: Core ver 2.11
[ 136.142849] NET: Registered protocol family 31
[ 136.142853] Bluetooth: HCI device and connection manager initialized
[ 136.142857] Bluetooth: HCI socket layer initialized
[ 136.152254] Bluetooth: L2CAP ver 2.9
[ 136.152260] Bluetooth: L2CAP socket layer initialized
[ 136.213936] Bluetooth: RFCOMM socket layer initialized
[ 136.214087] Bluetooth: RFCOMM TTY layer initialized
[ 136.214090] Bluetooth: RFCOMM ver 1.8
[ 137.828129] [drm] Initialized drm 1.1.0 20060810
[ 138.382348] NET: Registered protocol family 17
[ 143.761599] php[6908]: segfault at 7f96a2011f80 rip 7f96a2011f80 rsp 7fffb1dc2948 error 14
[ 145.064683] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 147.162191] eth0: no IPv6 routers present
[ 158.893350] CPU0 attaching NULL sched-domain.
[ 158.893360] CPU1 attaching NULL sched-domain.
[ 158.912444] CPU0 attaching sched-domain:
[ 158.912453] domain 0: span 03
[ 158.912456] groups: 01 02
[ 158.912460] domain 1: span 03
[ 158.912462] groups: 03
[ 158.912466] CPU1 attaching sched-domain:
[ 158.912469] domain 0: span 03
[ 158.912471] groups: 02 01
[ 158.912476] domain 1: span 03
[ 158.912478] groups: 03
[ 331.937812] php[16584]: segfault at 7f48f6bdbf80 rip 7f48f6bdbf80 rsp 7fff0698b2b8 error 14
[ 547.464463] php[31451]: segfault at 7fdd688def80 rip 7fdd688def80 rsp 7fff7868dfb8 error 14
[ 738.977306] php[11969]: segfault at 7f2d18132f80 rip 7f2d18132f80 rsp 7fff27ee4818 error 14
[ 797.603187] APIC error on CPU1: 00(40)
[ 797.604235] APIC error on CPU0: 00(40)
[ 923.193126] php[24947]: segfault at 7febf794bf80 rip 7febf794bf80 rsp 7fff076fd028 error 14
[ 1152.075357] php[5613]: segfault at 7f065246bf80 rip 7f065246bf80 rsp 7fff6221ab48 error 14
niranjan@niranjan-laptop:~$

niranjan@niranjan-laptop:~$ dmesg | grep firmware
niranjan@niranjan-laptop:~$ uname -r
2.6.24-23-generic
niranjan@niranjan-laptop:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

niranjan@niranjan-laptop:~$

L4Linux

I guess you have tried the following already:
Go to System->Administration->Hardware Drivers (Restricted drivers in 7.10 or previous) and let it install the drivers it tells you. You must be connected to the internet (through ethernet obviously) for it to download the drivers and install them.

__________________
folding@home
HELP RESEARCH AGAINST CANCER. It is very easy and won't cost you anything.

reed9

Hmm, I don't see the atheros linux drivers is your modules. Did see ndiswrapper - you've been trying to get it working using the windows drivers? Have you looked here? https://help.ubuntu.com/community/Wi...Driver/Atheros

niranjan61

Hi L4Linux and reed9,
thanks for replying,

Yes, I am connected with cable and not wireless, it just never worked,
Go to System->Administration->Hardware Drivers => tells me that,
Atheros Hardware Access Layer (HAL) Enabled (Yes) Not in use,
when I hover mouse it says --> This driver is necessary to support the hardware, there is no free/open alternative.

Please tell me best approach, I will start from there again and see how it goes,

waterhead

First, remove/uninstall NDISwrapper, it is not needed for this card. Then, in the hardware drivers section, click on the "enable" checkbox, so that it will download and install the Atheros driver. I believe that this may be the madwifi ath_pci driver.

If that doesn't work, you can compile a driver from the latest source. This uses the ath5k driver, and can be found here:

Download - Linux Wireless

You also should first install these packages:
linux-source
linux-headers
build-essential
make

__________________
Paul

Please do not PM me with requests for help. I will not reply.