Find the answer to your Linux question:
Results 1 to 5 of 5
Laptop model: Acer Aspire 5630 Linux Mint installed fine but it won't install the windows wireless drivers. Orignal OS is Vista. No idea how to get it to work, any ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined! TTIO's Avatar
    Join Date
    Nov 2008
    Location
    UK
    Posts
    80

    Help with wireless drivers for Linux mint


    Laptop model: Acer Aspire 5630

    Linux Mint installed fine but it won't install the windows wireless drivers. Orignal OS is Vista. No idea how to get it to work, any ideas on what to do now?

  2. #2
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Hi and welcome. Please read this http://www.linuxforums.org/forum/wir...tart-here.html and post the requested information.

  3. #3
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    Windows Vista drivers will not work in Linux. There usually are Linux drivers available, but first we need the requested info.
    Please do not send Private Messages to me with requests for help. I will not reply.

  4. $spacer_open
    $spacer_close
  5. #4
    Just Joined! TTIO's Avatar
    Join Date
    Nov 2008
    Location
    UK
    Posts
    80
    Sorry, I was being lame

    Anyway, here's the outputs:

    Code:
    lspci -nn
    00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
    00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
    00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
    00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
    00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
    00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02)
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
    00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
    00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
    00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
    05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
    06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
    06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
    06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
    06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01)
    06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
    06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
    
    lsmod
    Module                  Size  Used by
    i915                   38144  2 
    drm                    86056  3 i915
    binfmt_misc            16904  1 
    rfcomm                 44432  0 
    bridge                 56980  0 
    stp                    10628  1 bridge
    bnep                   20480  2 
    sco                    18308  2 
    l2cap                  30464  6 rfcomm,bnep
    bluetooth              61924  6 rfcomm,bnep,sco,l2cap
    ppdev                  15620  0 
    acpi_cpufreq           15500  1 
    cpufreq_ondemand       14988  1 
    cpufreq_conservative    14600  0 
    cpufreq_userspace      11396  0 
    cpufreq_powersave       9856  0 
    cpufreq_stats          13188  0 
    freq_table             12672  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
    sbs                    19464  0 
    pci_slot               12552  0 
    sbshc                  13440  1 sbs
    iptable_filter         10752  0 
    ip_tables              19600  1 iptable_filter
    x_tables               22916  1 ip_tables
    parport_pc             39204  0 
    lp                     17156  0 
    parport                42604  3 ppdev,parport_pc,lp
    joydev                 18368  0 
    pcmcia                 43052  0 
    acer_wmi               18880  0 
    led_class              12164  1 acer_wmi
    psmouse                45200  0 
    serio_raw              13444  0 
    yenta_socket           31756  1 
    pcspkr                 10624  0 
    evdev                  17696  17 
    sdhci_pci              15360  0 
    sdhci                  23940  1 sdhci_pci
    iTCO_wdt               18596  0 
    iTCO_vendor_support    11652  1 iTCO_wdt
    rsrc_nonstatic         19072  1 yenta_socket
    pcmcia_core            43412  3 pcmcia,yenta_socket,rsrc_nonstatic
    mmc_core               58268  1 sdhci
    snd_hda_intel         381488  3 
    snd_pcm_oss            46848  0 
    snd_mixer_oss          22784  1 snd_pcm_oss
    snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
    snd_seq_dummy          10884  0 
    ndiswrapper           196380  0 
    snd_seq_oss            38528  0 
    container              11520  0 
    battery                18436  0 
    snd_seq_midi           14336  0 
    snd_rawmidi            29824  1 snd_seq_midi
    ac                     12292  0 
    video                  25104  0 
    output                 11008  1 video
    snd_seq_midi_event     15232  2 snd_seq_oss,snd_seq_midi
    snd_seq                57776  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer              29960  2 snd_pcm,snd_seq
    snd_seq_device         15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    wmi                    14504  1 acer_wmi
    button                 14224  0 
    intel_agp              33724  1 
    agpgart                42184  3 drm,intel_agp
    snd                    63268  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    shpchp                 37908  0 
    pci_hotplug            35236  1 shpchp
    soundcore              15328  1 snd
    snd_page_alloc         16136  2 snd_hda_intel,snd_pcm
    ext3                  133256  1 
    jbd                    55444  1 ext3
    mbcache                16004  1 ext3
    usbhid                 35840  0 
    hid                    50560  1 usbhid
    sd_mod                 42264  5 
    crc_t10dif              9984  1 sd_mod
    sr_mod                 22212  0 
    cdrom                  43168  1 sr_mod
    sg                     39732  0 
    ata_generic            12932  0 
    ata_piix               24580  4 
    b44                    35984  0 
    pata_acpi              12160  0 
    libata                177312  3 ata_generic,ata_piix,pata_acpi
    ssb                    40580  1 b44
    mii                    13440  1 b44
    scsi_mod              155212  4 sd_mod,sr_mod,sg,libata
    dock                   16656  1 libata
    ehci_hcd               43276  0 
    uhci_hcd               30736  0 
    usbcore               148848  5 ndiswrapper,usbhid,ehci_hcd,uhci_hcd
    thermal                23708  0 
    processor              42156  4 acpi_cpufreq,thermal
    fan                    12548  0 
    fbcon                  47648  0 
    tileblit               10880  1 fbcon
    font                   16512  1 fbcon
    bitblit                13824  1 fbcon
    softcursor              9984  1 bitblit
    fuse                   60828  7 
    
     dmesg
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
    [    0.000000]  BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [    0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000
    [    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
    [    0.000000] RAMDISK: 37773000 - 37fef58e
    [    0.000000] DMI present.
    [    0.000000] ACPI: RSDP 000F63A0, 0014 (r0 ACRSYS)
    [    0.000000] ACPI: RSDT 3F68519E, 0058 (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
    [    0.000000] ACPI: FACP 3F68CC76, 0074 (r1 Acer   Grape     6040000 LOHR       5A)
    [    0.000000] ACPI: DSDT 3F686EC7, 5DAF (r1 Acer   CALISTGA  6040000 INTL 20050228)
    [    0.000000] ACPI: FACS 3F68DFC0, 0040
    [    0.000000] ACPI: APIC 3F68CCEA, 0068 (r1 Acer   Grape     6040000 LOHR       5A)
    [    0.000000] ACPI: HPET 3F68CD52, 0038 (r1 Acer   Grape     6040000 LOHR       5A)
    [    0.000000] ACPI: MCFG 3F68CD8A, 003C (r1 Acer   Grape     6040000 LOHR       5A)
    [    0.000000] ACPI: SLIC 3F68CDC6, 0176 (r1 ACRSYS ACRPRDCT  6040000 LOHR        0)
    [    0.000000] ACPI: DBGP 3F68CF3C, 0034 (r1 Acer   Grape     6040000 LOHR        0)
    [    0.000000] ACPI: APIC 3F68CF70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
    [    0.000000] ACPI: BOOT 3F68CFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
    [    0.000000] ACPI: SSDT 3F686878, 064F (r1 SataRe  SataPri     1000 INTL 20050228)
    [    0.000000] ACPI: SSDT 3F6861E6, 0692 (r1 SataRe  SataSec     1000 INTL 20050228)
    [    0.000000] ACPI: SSDT 3F685782, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
    [    0.000000] ACPI: SSDT 3F6856DC, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050228)
    [    0.000000] ACPI: SSDT 3F6851F6, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050228)
    [    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
    [    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
    [    0.000000] ACPI: DMI detected: Acer
    [    0.000000] 118MB HIGHMEM available.
    [    0.000000] 896MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 38000000
    [    0.000000]   low ram: 00000000 - 38000000
    [    0.000000]   bootmap 00008000 - 0000f000
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
    [    0.000000]   #4 [0037773000 - 0037fef58e]          RAMDISK ==> [0037773000 - 0037fef58e]
    [    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
    [    0.000000]   #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
    [    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
    [    0.000000] found SMP MP-table at [c00f6450] 000f6450
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00038000
    [    0.000000]   HighMem  0x00038000 -> 0x0003f680
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[2] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0003f680
    [    0.000000] On node 0 totalpages: 259615
    [    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
    [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
    [    0.000000]   Normal zone: 223300 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 30069 pages, LIFO batch:7
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [    0.000000] mapped APIC to ffffb000 (fee00000)
    [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
    [    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
    [    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257332
    [    0.000000] Kernel command line: root=/dev/sda6 ro quiet splash
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
    [    0.000000] TSC: PIT calibration confirmed by PMTIMER.
    [    0.000000] TSC: using PIT calibration value
    [    0.000000] Detected 1662.475 MHz processor.
    [    0.004000] Console: colour VGA+ 80x25
    [    0.004000] console [tty0] enabled
    [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.004000] Memory: 1014440k/1038848k available (2572k kernel code, 23644k reserved, 1160k data, 424k init, 121344k highmem)
    [    0.004000] virtual kernel memory layout:
    [    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
    [    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    [    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    [    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
    [    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
    [    0.004000]       .data : 0xc038329a - 0xc04a5680   (1160 kB)
    [    0.004000]       .text : 0xc0100000 - 0xc038329a   (2572 kB)
    [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
    [    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.004000] hpet clockevent registered
    [    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.95 BogoMIPS (lpj=6649900)
    [    0.004000] Security Framework initialized
    [    0.004000] SELinux:  Disabled at boot.
    [    0.004000] AppArmor: AppArmor initialized
    [    0.004000] Mount-cache hash table entries: 512
    [    0.004000] Initializing cgroup subsys ns
    [    0.004000] Initializing cgroup subsys cpuacct
    [    0.004000] Initializing cgroup subsys memory
    [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.004000] CPU: L2 cache: 2048K
    [    0.004000] CPU: Physical Processor ID: 0
    [    0.004000] CPU: Processor Core ID: 0
    [    0.004000] using mwait in idle threads.
    [    0.004000] Checking 'hlt' instruction... OK.
    [    0.019602] ACPI: Core revision 20080609
    [    0.022842] ACPI: Checking initramfs for custom DSDT
    [    0.732318] ENABLING IO-APIC IRQs
    [    0.732540] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.772651] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
    [    0.776031] Booting processor 1/1 ip 6000
    [    0.004000] Initializing CPU#1
    [    0.004000] Calibrating delay using timer specific routine.. 3325.11 BogoMIPS (lpj=6650221)
    [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.004000] CPU: L2 cache: 2048K
    [    0.004000] CPU: Physical Processor ID: 0
    [    0.004000] CPU: Processor Core ID: 1
    [    0.860851] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
    [    0.860882] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.864060] Brought up 2 CPUs
    [    0.864067] Total of 2 processors activated (6650.06 BogoMIPS).
    [    0.864101] CPU0 attaching sched-domain:
    [    0.864106]  domain 0: span 0-1 level MC
    [    0.864111]   groups: 0 1
    [    0.864123] CPU1 attaching sched-domain:
    [    0.864127]  domain 0: span 0-1 level MC
    [    0.864132]   groups: 1 0
    [    0.864274] net_namespace: 840 bytes
    [    0.864274] Booting paravirtualized kernel on bare hardware
    [    0.864532] Time: 20:08:20  Date: 04/04/09
    [    0.864580] NET: Registered protocol family 16
    [    0.864616] EISA bus registered
    [    0.864616] ACPI: bus type pci registered
    [    0.864616] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.864616] PCI: MCFG area at e0000000 reserved in E820
    [    0.864616] PCI: Using MMCONFIG for extended config space
    [    0.864616] PCI: Using configuration type 1 for base access
    [    0.870216] ACPI: EC: Look up EC in DSDT
    [    0.878900] ACPI: BIOS _OSI(Linux) query ignored via DMI
    [    0.880280] ACPI: Interpreter enabled
    [    0.880286] ACPI: (supports S0 S3 S4 S5)
    [    0.880316] ACPI: Using IOAPIC for interrupt routing
    [    0.888304] ACPI: EC: non-query interrupt received, switching to interrupt mode
    [    0.944989] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [    0.944989] ACPI: EC: driver started in interrupt mode
    [    0.944989] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.944989] PCI: 0000:00:02.0 reg 10 32bit mmio: [d0200000, d027ffff]
    [    0.944989] PCI: 0000:00:02.0 reg 14 io port: [5088, 508f]
    [    0.944989] PCI: 0000:00:02.0 reg 18 32bit mmio: [c0000000, cfffffff]
    [    0.944989] PCI: 0000:00:02.0 reg 1c 32bit mmio: [d0300000, d033ffff]
    [    0.948060] PCI: 0000:00:02.1 reg 10 32bit mmio: [d0280000, d02fffff]
    [    0.948234] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d0340000, d0343fff]
    [    0.948310] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.948319] pci 0000:00:1b.0: PME# disabled
    [    0.948418] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.948426] pci 0000:00:1c.0: PME# disabled
    [    0.948526] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.948534] pci 0000:00:1c.1: PME# disabled
    [    0.948634] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.948642] pci 0000:00:1c.2: PME# disabled
    [    0.948741] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [    0.948749] pci 0000:00:1c.3: PME# disabled
    [    0.948820] PCI: 0000:00:1d.0 reg 20 io port: [50a0, 50bf]
    [    0.948908] PCI: 0000:00:1d.1 reg 20 io port: [50c0, 50df]
    [    0.948997] PCI: 0000:00:1d.2 reg 20 io port: [50e0, 50ff]
    [    0.949084] PCI: 0000:00:1d.3 reg 20 io port: [5400, 541f]
    [    0.949178] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d0544000, d05443ff]
    [    0.949257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.949266] pci 0000:00:1d.7: PME# disabled
    [    0.949483] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    [    0.949491] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    [    0.949553] PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
    [    0.949566] PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
    [    0.949579] PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
    [    0.949591] PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
    [    0.949603] PCI: 0000:00:1f.2 reg 20 io port: [5440, 544f]
    [    0.949647] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.949655] pci 0000:00:1f.2: PME# disabled
    [    0.949731] PCI: 0000:00:1f.3 reg 20 io port: [5420, 543f]
    [    0.949856] PCI: bridge 0000:00:1c.0 io port: [0, fff]
    [    0.949864] PCI: bridge 0000:00:1c.0 32bit mmio: [0, fffff]
    [    0.950225] PCI: 0000:05:00.0 reg 10 32bit mmio: [d0100000, d0100fff]
    [    0.950456] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [    0.950472] pci 0000:05:00.0: PME# disabled
    [    0.950550] PCI: bridge 0000:00:1c.3 32bit mmio: [d0100000, d01fffff]
    [    0.950619] PCI: 0000:06:01.0 reg 10 32bit mmio: [d0000000, d0001fff]
    [    0.950693] pci 0000:06:01.0: supports D1
    [    0.950696] pci 0000:06:01.0: supports D2
    [    0.950700] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.950709] pci 0000:06:01.0: PME# disabled
    [    0.950767] PCI: 0000:06:04.0 reg 10 32bit mmio: [0, fff]
    [    0.950795] pci 0000:06:04.0: supports D1
    [    0.950798] pci 0000:06:04.0: supports D2
    [    0.950802] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.950810] pci 0000:06:04.0: PME# disabled
    [    0.950864] PCI: 0000:06:04.1 reg 10 32bit mmio: [d0003000, d000307f]
    [    0.950949] pci 0000:06:04.1: supports D1
    [    0.950953] pci 0000:06:04.1: supports D2
    [    0.950957] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
    [    0.950965] pci 0000:06:04.1: PME# disabled
    [    0.951019] PCI: 0000:06:04.2 reg 10 32bit mmio: [d0003400, d00034ff]
    [    0.951100] pci 0000:06:04.2: supports D1
    [    0.951103] pci 0000:06:04.2: supports D2
    [    0.951107] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
    [    0.951116] pci 0000:06:04.2: PME# disabled
    [    0.951170] PCI: 0000:06:04.3 reg 10 32bit mmio: [d0003800, d000387f]
    [    0.951253] pci 0000:06:04.3: supports D1
    [    0.951256] pci 0000:06:04.3: supports D2
    [    0.951260] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
    [    0.951269] pci 0000:06:04.3: PME# disabled
    [    0.951322] PCI: 0000:06:04.4 reg 10 32bit mmio: [0, ff]
    [    0.951405] pci 0000:06:04.4: supports D1
    [    0.951408] pci 0000:06:04.4: supports D2
    [    0.951411] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
    [    0.951420] pci 0000:06:04.4: PME# disabled
    [    0.951491] pci 0000:00:1e.0: transparent bridge
    [    0.951503] PCI: bridge 0000:00:1e.0 32bit mmio: [d0000000, d00fffff]
    [    0.951587] bus 00 -> node 0
    [    0.951600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.952354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [    0.952657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [    0.952955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [    0.953256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [    0.953581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [    0.960258] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
    [    0.960504] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
    [    0.960747] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
    [    0.960989] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
    [    0.961230] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled.
    [    0.961472] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10
    [    0.961713] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
    [    0.961951] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
    [    0.962103] Linux Plug and Play Support v0.97 (c) Adam Belay
    [    0.962103] pnp: PnP ACPI init
    [    0.962103] ACPI: bus type pnp registered
    [    0.988450] pnp 00:06: io resource (0x2e-0x2f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x4e-0x4f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x61-0x61) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x63-0x63) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x65-0x65) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x67-0x67) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x70-0x70) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x80-0x80) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x92-0x92) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0xb2-0xb3) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp 00:06: io resource (0x800-0x80f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
    [    0.988450] pnp: PnP ACPI: found 10 devices
    [    0.988450] ACPI: ACPI bus type pnp unregistered
    [    0.988450] PnPBIOS: Disabled by ACPI PNP
    [    0.988450] PCI: Using ACPI for IRQ routing
    [    0.988450] pci 0000:00:1c.0: BAR 7: can't allocate resource
    [    0.988450] pci 0000:00:1c.0: BAR 8: can't allocate resource
    [    0.996049] NET: Registered protocol family 8
    [    0.996054] NET: Registered protocol family 20
    [    0.996087] NetLabel: Initializing
    [    0.996087] NetLabel:  domain hash size = 128
    [    0.996087] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.996103] NetLabel:  unlabeled traffic allowed by default
    [    0.996115] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.996125] hpet0: 3 64-bit timers, 14318180 Hz
    [    0.998110] tracer: 772 pages allocated for 65536 entries of 48 bytes
    [    0.998116]    actual entries 65620
    [    0.998254] AppArmor: AppArmor Filesystem Enabled
    [    0.998294] ACPI: RTC can wake from S4
    [    1.000052] Switched to high resolution mode on CPU 0
    [    1.000911] Switched to high resolution mode on CPU 1
    [    1.004058] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
    [    1.004065] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    [    1.004071] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    [    1.004077] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    [    1.004083] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    [    1.004089] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
    [    1.004105] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
    [    1.004120] system 00:06: ioport range 0x1000-0x107f has been reserved
    [    1.004126] system 00:06: ioport range 0x1180-0x11bf has been reserved
    [    1.004131] system 00:06: ioport range 0x1640-0x164f has been reserved
    [    1.004137] system 00:06: ioport range 0xfe00-0xfefe has been reserved
    [    1.004143] system 00:06: ioport range 0xff2c-0xff2f has been reserved
    [    1.039979] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    [    1.039984] pci 0000:00:1c.0:   IO window: disabled
    [    1.039994] pci 0000:00:1c.0:   MEM window: disabled
    [    1.040014] pci 0000:00:1c.0:   PREFETCH window: disabled
    [    1.040026] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    [    1.040030] pci 0000:00:1c.1:   IO window: disabled
    [    1.040039] pci 0000:00:1c.1:   MEM window: disabled
    [    1.040047] pci 0000:00:1c.1:   PREFETCH window: disabled
    [    1.040058] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    [    1.040062] pci 0000:00:1c.2:   IO window: disabled
    [    1.040072] pci 0000:00:1c.2:   MEM window: disabled
    [    1.040079] pci 0000:00:1c.2:   PREFETCH window: disabled
    [    1.040091] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    [    1.040095] pci 0000:00:1c.3:   IO window: disabled
    [    1.040105] pci 0000:00:1c.3:   MEM window: 0xd0100000-0xd01fffff
    [    1.040113] pci 0000:00:1c.3:   PREFETCH window: disabled
    [    1.040141] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
    [    1.040146] pci 0000:06:04.0:   IO window: 0x002000-0x0020ff
    [    1.040155] pci 0000:06:04.0:   IO window: 0x002400-0x0024ff
    [    1.040164] pci 0000:06:04.0:   PREFETCH window: 0x50000000-0x53ffffff
    [    1.040173] pci 0000:06:04.0:   MEM window: 0x54000000-0x57ffffff
    [    1.040182] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
    [    1.040188] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
    [    1.040198] pci 0000:00:1e.0:   MEM window: 0xd0000000-0xd00fffff
    [    1.040206] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
    [    1.040234] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.040246] pci 0000:00:1c.0: setting latency timer to 64
    [    1.040261] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    1.040270] pci 0000:00:1c.1: setting latency timer to 64
    [    1.040285] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.040293] pci 0000:00:1c.2: setting latency timer to 64
    [    1.040308] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    1.040317] pci 0000:00:1c.3: setting latency timer to 64
    [    1.040326] pci 0000:00:1e.0: enabling device (0004 -> 0007)
    [    1.040336] pci 0000:00:1e.0: setting latency timer to 64
    [    1.040352] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.040362] bus: 00 index 0 io port: [0, ffff]
    [    1.040366] bus: 00 index 1 mmio: [0, ffffffff]
    [    1.040371] bus: 02 index 0 mmio: [0, fff]
    [    1.040374] bus: 02 index 1 mmio: [0, fffff]
    [    1.040378] bus: 02 index 2 mmio: [0, 0]
    [    1.040382] bus: 02 index 3 mmio: [0, 0]
    [    1.040386] bus: 03 index 0 mmio: [0, 0]
    [    1.040389] bus: 03 index 1 mmio: [0, 0]
    [    1.040392] bus: 03 index 2 mmio: [0, 0]
    [    1.040396] bus: 03 index 3 mmio: [0, 0]
    [    1.040399] bus: 04 index 0 mmio: [0, 0]
    [    1.040403] bus: 04 index 1 mmio: [0, 0]
    [    1.040406] bus: 04 index 2 mmio: [0, 0]
    [    1.040410] bus: 04 index 3 mmio: [0, 0]
    [    1.040414] bus: 05 index 0 mmio: [0, 0]
    [    1.040417] bus: 05 index 1 mmio: [d0100000, d01fffff]
    [    1.040421] bus: 05 index 2 mmio: [0, 0]
    [    1.040424] bus: 05 index 3 mmio: [0, 0]
    [    1.040429] bus: 06 index 0 io port: [2000, 2fff]
    [    1.040433] bus: 06 index 1 mmio: [d0000000, d00fffff]
    [    1.040437] bus: 06 index 2 mmio: [50000000, 53ffffff]
    [    1.040441] bus: 06 index 3 io port: [0, ffff]
    [    1.040445] bus: 06 index 4 mmio: [0, ffffffff]
    [    1.040449] bus: 07 index 0 io port: [2000, 20ff]
    [    1.040453] bus: 07 index 1 io port: [2400, 24ff]
    [    1.040457] bus: 07 index 2 mmio: [50000000, 53ffffff]
    [    1.040461] bus: 07 index 3 mmio: [54000000, 57ffffff]
    [    1.040476] NET: Registered protocol family 2
    [    1.052097] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    1.052517] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    1.053227] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    1.053577] TCP: Hash tables configured (established 131072 bind 65536)
    [    1.053583] TCP reno registered
    [    1.060126] NET: Registered protocol family 1
    [    1.060329] checking if image is initramfs... it is
    [    2.494133] Freeing initrd memory: 8689k freed
    [    2.494641] Simple Boot Flag at 0x36 set to 0x1
    [    2.496247] audit: initializing netlink socket (disabled)
    [    2.496282] type=2000 audit(1238875701.492:1): initialized
    [    2.508012] highmem bounce pool size: 64 pages
    [    2.508024] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    2.512966] VFS: Disk quotas dquot_6.5.1
    [    2.513163] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    2.513362] msgmni has been set to 1762
    [    2.513592] io scheduler noop registered
    [    2.513598] io scheduler anticipatory registered
    [    2.513603] io scheduler deadline registered
    [    2.513626] io scheduler cfq registered (default)
    [    2.513650] pci 0000:00:02.0: Boot video device
    [    2.514017] pcieport-driver 0000:00:1c.0: setting latency timer to 64
    [    2.514089] pcieport-driver 0000:00:1c.0: found MSI capability
    [    2.514161] pci_express 0000:00:1c.0:pcie00: allocate port service
    [    2.514244] pci_express 0000:00:1c.0:pcie02: allocate port service
    [    2.514323] pci_express 0000:00:1c.0:pcie03: allocate port service
    [    2.514510] pcieport-driver 0000:00:1c.1: setting latency timer to 64
    [    2.514579] pcieport-driver 0000:00:1c.1: found MSI capability
    [    2.514646] pci_express 0000:00:1c.1:pcie00: allocate port service
    [    2.514728] pci_express 0000:00:1c.1:pcie02: allocate port service
    [    2.514806] pci_express 0000:00:1c.1:pcie03: allocate port service
    [    2.514985] pcieport-driver 0000:00:1c.2: setting latency timer to 64
    [    2.515053] pcieport-driver 0000:00:1c.2: found MSI capability
    [    2.515121] pci_express 0000:00:1c.2:pcie00: allocate port service
    [    2.515207] pci_express 0000:00:1c.2:pcie02: allocate port service
    [    2.515287] pci_express 0000:00:1c.2:pcie03: allocate port service
    [    2.515468] pcieport-driver 0000:00:1c.3: setting latency timer to 64
    [    2.515537] pcieport-driver 0000:00:1c.3: found MSI capability
    [    2.515604] pci_express 0000:00:1c.3:pcie00: allocate port service
    [    2.515689] pci_express 0000:00:1c.3:pcie02: allocate port service
    [    2.515772] pci_express 0000:00:1c.3:pcie03: allocate port service
    [    2.516509] isapnp: Scanning for PnP cards...
    [    2.870623] isapnp: No Plug & Play device found
    [    2.938712] hpet_resources: 0xfed00000 is busy
    [    2.938847] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [    2.943232] brd: module loaded
    [    2.943369] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [    2.943610] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
    [    2.946197] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    2.946297] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.946308] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    2.946314] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    2.946319] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    2.946324] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    2.947144] mice: PS/2 mouse device common for all mice
    [    2.947402] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [    2.947442] rtc0: alarms up to one month, y3k, hpet irqs
    [    2.947716] EISA: Probing bus 0 at eisa.0
    [    2.947726] Cannot allocate resource for EISA slot 1
    [    2.947731] Cannot allocate resource for EISA slot 2
    [    2.947745] Cannot allocate resource for EISA slot 5
    [    2.947775] EISA: Detected 0 cards.
    [    2.947781] cpuidle: using governor ladder
    [    2.947786] cpuidle: using governor menu
    [    2.948812] TCP cubic registered
    [    2.948859] Using IPI No-Shortcut mode
    [    2.949214] registered taskstats version 1
    [    2.949448]   Magic number: 5:473:143
    [    2.949456] block ram8: hash matches
    [    2.949547] acpi device:14: hash matches
    [    2.949598] rtc_cmos 00:07: setting system clock to 2009-04-04 20:08:22 UTC (1238875702)
    [    2.949605] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.949609] EDD information not available.
    [    2.949900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    2.949974] Freeing unused kernel memory: 424k freed
    [    2.950049] Write protecting the kernel text: 2576k
    [    2.950102] Write protecting the kernel read-only data: 936k
    [    3.181499] fuse init (API version 7.9)
    [    3.273882] ACPI: SSDT 3F685F28, 01F6 (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
    [    3.274708] ACPI: SSDT 3F6859E1, 04C2 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
    [    3.351507] Monitor-Mwait will be used to enter C-1 state
    [    3.351514] Monitor-Mwait will be used to enter C-2 state
    [    3.351520] Monitor-Mwait will be used to enter C-3 state
    [    3.351923] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    [    3.352041] processor ACPI0007:00: registered as cooling_device0
    [    3.352050] ACPI: Processor [CPU0] (supports 8 throttling states)
    [    3.352732] ACPI: SSDT 3F68611E, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
    [    3.353481] ACPI: SSDT 3F685EA3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
    [    3.355401] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    [    3.355496] processor ACPI0007:01: registered as cooling_device1
    [    3.355505] ACPI: Processor [CPU1] (supports 8 throttling states)
    [    3.361064] Marking TSC unstable due to TSC halts in idle
    [    3.365887] thermal LNXTHERM:01: registered as thermal_zone0
    [    3.376013] ACPI: Thermal Zone [TZ00] (54 C)
    [    3.380726] thermal LNXTHERM:02: registered as thermal_zone1
    [    3.390648] ACPI: Thermal Zone [TZ01] (54 C)
    [    3.971639] usbcore: registered new interface driver usbfs
    [    3.971683] usbcore: registered new interface driver hub
    [    3.971771] usbcore: registered new device driver usb
    [    3.977419] USB Universal Host Controller Interface driver v3.0
    [    3.977497] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    3.977511] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    3.977518] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    3.977592] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [    3.977641] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
    [    3.977864] usb usb1: configuration #1 chosen from 1 choice
    [    3.977924] hub 1-0:1.0: USB hub found
    [    3.977936] hub 1-0:1.0: 2 ports detected
    [    4.081407] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    4.081423] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    4.081430] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    4.081495] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [    4.081546] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
    [    4.081711] usb usb2: configuration #1 chosen from 1 choice
    [    4.081765] hub 2-0:1.0: USB hub found
    [    4.081778] hub 2-0:1.0: 2 ports detected
    [    4.087091] No dock devices found.
    [    4.185466] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    4.185485] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    4.185492] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    4.185540] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [    4.185591] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
    [    4.185756] usb usb3: configuration #1 chosen from 1 choice
    [    4.185810] hub 3-0:1.0: USB hub found
    [    4.185824] hub 3-0:1.0: 2 ports detected
    [    4.189949] SCSI subsystem initialized
    [    4.231184] libata version 3.00 loaded.
    [    4.393501] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    4.393518] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    4.393525] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    4.393583] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    [    4.393634] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
    [    4.393805] usb usb4: configuration #1 chosen from 1 choice
    [    4.393866] hub 4-0:1.0: USB hub found
    [    4.393878] hub 4-0:1.0: 2 ports detected
    [    4.505099] usb 3-1: new full speed USB device using uhci_hcd and address 2
    [    4.603431] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    4.603454] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    4.603461] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    4.603517] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    [    4.607441] ehci_hcd 0000:00:1d.7: debug port 1
    [    4.607452] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    4.607466] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
    [    4.632087] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [    4.632315] usb usb5: configuration #1 chosen from 1 choice
    [    4.632370] hub 5-0:1.0: USB hub found
    [    4.632384] hub 5-0:1.0: 8 ports detected
    [    4.840669] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    4.840721] pata_acpi 0000:00:1f.2: setting latency timer to 64
    [    4.840747] pata_acpi 0000:00:1f.2: PCI INT B disabled
    [    4.847005] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    4.847019] b44 0000:06:01.0: setting latency timer to 64
    [    4.904256] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
    [    4.904333] ata_piix 0000:00:1f.2: version 2.12
    [    4.904356] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    4.904364] ata_piix 0000:00:1f.2: MAP [<6>b44.c:v2.0
    [    4.904370]  P0 P2 IDE IDE ]
    [    4.924829] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:ac:e7:85
    [    5.000145] Clocksource tsc unstable (delta = -178929706 ns)
    [    5.032149] usb 3-1: device not accepting address 2, error -71
    [    5.060186] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    5.060445] scsi0 : ata_piix
    [    5.061131] scsi1 : ata_piix
    [    5.063230] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14
    [    5.063236] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15
    [    5.088201] hub 3-0:1.0: unable to enumerate USB device on port 1
    [    5.226569] ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133
    [    5.226577] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    5.241392] ata1.00: configured for UDMA/133
    [    5.328165] usb 5-5: new high speed USB device using ehci_hcd and address 2
    [    5.428695] ata2.00: ATAPI: Slimtype DVDRW SSM-8515S, GRS6, max UDMA/33
    [    5.461296] usb 5-5: configuration #1 chosen from 1 choice
    [    5.461718] hub 5-5:1.0: USB hub found
    [    5.461893] hub 5-5:1.0: 4 ports detected
    [    5.469475] ata2.00: configured for UDMA/33
    [    5.469698] scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.AL PQ: 0 ANSI: 5
    [    5.471710] scsi 1:0:0:0: CD-ROM            Slimtype DVDRW SSM-8515S  GRS6 PQ: 0 ANSI: 5
    [    5.491638] scsi 0:0:0:0: Attached scsi generic sg0 type 0
    [    5.491708] scsi 1:0:0:0: Attached scsi generic sg1 type 5
    [    5.516928] Driver 'sr' needs updating - please use bus_type methods
    [    5.526294] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    5.526302] Uniform CD-ROM driver Revision: 3.20
    [    5.526470] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    5.530920] Driver 'sd' needs updating - please use bus_type methods
    [    5.531070] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    [    5.531110] sd 0:0:0:0: [sda] Write Protect is off
    [    5.531115] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    5.531186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    5.531331] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    [    5.531374] sd 0:0:0:0: [sda] Write Protect is off
    [    5.531380] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    5.531458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    5.531467]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [    5.621991] sd 0:0:0:0: [sda] Attached SCSI disk
    [    5.812319] usb 5-5.1: new low speed USB device using ehci_hcd and address 4
    [    5.926761] usb 5-5.1: configuration #1 chosen from 1 choice
    [    6.168108] usb 4-1: new low speed USB device using uhci_hcd and address 2
    [    6.357415] usb 4-1: configuration #1 chosen from 1 choice
    [    6.364143] usbcore: registered new interface driver hiddev
    [    6.367033] input: Logitech Logitech Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-5/5-5.1/5-5.1:1.0/input/input2
    [    6.380243] input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech Keyboard] on usb-0000:00:1d.7-5.1
    [    6.384687] input: Logitech Logitech Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-5/5-5.1/5-5.1:1.1/input/input3
    [    6.389241] input,hidraw1: USB HID v1.10 Device [Logitech Logitech Keyboard] on usb-0000:00:1d.7-5.1
    [    6.422156] input: HID 04d9:1135 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input4
    [    6.422789] input,hidraw2: USB HID v1.10 Mouse [HID 04d9:1135] on usb-0000:00:1d.3-1
    [    6.422836] usbcore: registered new interface driver usbhid
    [    6.422843] usbhid: v2.6:USB HID core driver
    [    6.583933] PM: Starting manual resume from disk
    [    6.583940] PM: Resume from partition 8:5
    [    6.583944] PM: Checking hibernation image.
    [    6.584132] PM: Resume from disk failed.
    [    6.642517] kjournald starting.  Commit interval 5 seconds
    [    6.642567] EXT3-fs: mounted filesystem with ordered data mode.
    [   13.632408] udevd version 124 started
    [   14.269956] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [   14.393540] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   14.574380] Linux agpgart interface v0.103
    [   14.585000] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
    [   14.585932] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    [   14.605161] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [   14.664469] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [   14.680058] ACPI: Power Button (FF) [PWRF]
    [   14.680285] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [   14.680415] ACPI: Lid Switch [LID]
    [   14.680558] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
    [   14.712045] ACPI: Sleep Button (CM) [SLPB]
    [   14.712246] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
    [   14.744031] ACPI: Power Button (CM) [PWRB]
    [   14.761055] ACPI: WMI: Mapper loaded
    [   15.193762] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input9
    [   15.224054] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [   15.224511] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input10
    [   15.256055] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   15.280863] ACPI: AC Adapter [ACAD] (on-line)
    [   15.624397] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [   15.760271] ACPI: Battery Slot [BAT1] (battery present)
    [   16.145479] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   16.145526] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   16.524257] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'KeBugCheck'
    [   16.524719] ndiswrapper (load_sys_files:206): couldn't prepare driver 'netw5x32'
    [   16.526357] ndiswrapper (load_wrap_driver:108): couldn't load driver netw5x32; check system log for messages from 'loadndisdriver'
    [   16.642300] usbcore: registered new interface driver ndiswrapper
    [   16.650580] iTCO_vendor_support: vendor-support=0
    [   16.671126] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    [   16.671271] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
    [   16.671415] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [   16.721259] sdhci: Secure Digital Host Controller Interface driver
    [   16.721265] sdhci: Copyright(c) Pierre Ossman
    [   16.793100] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
    [   16.793124] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
    [   16.793136] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   16.793263] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
    [   16.796331] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
    [   16.796350] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
    [   16.796360] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   16.796439] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
    [   16.845440] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [   16.883126] Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090]
    [   16.883163] Yenta: Using CSCINT to route CSC interrupts to PCI
    [   16.883168] Yenta: Routing CardBus interrupts to PCI
    [   16.883178] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
    [   16.958686] intel_rng: FWH not detected
    [   17.112895] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
    [   17.112903] Socket status: 30000006
    [   17.112909] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
    [   17.112921] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
    [   17.112927] cs: IO port probe 0x2000-0x2fff: clean.
    [   17.113346] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
    [   17.113351] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
    [   17.159483] acer-wmi: Acer Laptop ACPI-WMI Extras
    [   17.603191] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
    [   17.633768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
    [   17.671415] Registered led device: acer-wmi::mail
    [   18.897739] cs: IO port probe 0x100-0x3af: clean.
    [   18.899890] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    [   18.900818] cs: IO port probe 0x820-0x8ff: clean.
    [   18.901583] cs: IO port probe 0xc00-0xcf7: clean.
    [   18.902594] cs: IO port probe 0xa00-0xaff: clean.
    [   19.655606] lp: driver loaded but no devices found
    [   19.955092] Adding 497972k swap on /dev/sda5.  Priority:-1 extents:1 across:497972k
    [   20.545557] EXT3 FS on sda6, internal journal
    [   22.335997] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   24.372930] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [   24.443919] apm: BIOS not found.
    [   24.613374] ppdev: user-space parallel port driver
    [   27.329152] Bluetooth: Core ver 2.13
    [   27.330250] NET: Registered protocol family 31
    [   27.330259] Bluetooth: HCI device and connection manager initialized
    [   27.330265] Bluetooth: HCI socket layer initialized
    [   27.353177] Bluetooth: L2CAP ver 2.11
    [   27.353188] Bluetooth: L2CAP socket layer initialized
    [   27.373512] Bluetooth: SCO (Voice Link) ver 0.6
    [   27.373524] Bluetooth: SCO socket layer initialized
    [   27.401301] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   27.401314] Bluetooth: BNEP filters: protocol multicast
    [   27.463463] Bridge firewalling registered
    [   27.464767] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    [   27.477479] Bluetooth: RFCOMM socket layer initialized
    [   27.477503] Bluetooth: RFCOMM TTY layer initialized
    [   27.477507] Bluetooth: RFCOMM ver 1.10
    [   31.612148] b44: eth0: BUG!  Timeout waiting for bit 00000002 of register 42c to clear.
    [   31.725948] [drm] Initialized drm 1.1.0 20060810
    [   31.735754] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   31.735772] pci 0000:00:02.0: setting latency timer to 64
    [   31.739059] [drm] Initialized i915 1.6.0 20060119 on minor 0
    [  331.096097] ACPI: EC: missing confirmations, switch off interrupt mode.
    [  331.616103] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
    [  331.616135] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.ACAD._PSR] (Node f7019e70), AE_TIME
    [  331.616234] ACPI Exception (ac-0136): AE_TIME, Error reading AC Adapter state [20080609]
    [ 3077.845158] CPU0 attaching NULL sched-domain.
    [ 3077.845178] CPU1 attaching NULL sched-domain.
    [ 3077.861330] CPU0 attaching sched-domain:
    [ 3077.861342]  domain 0: span 0-1 level MC
    [ 3077.861348]   groups: 0 1
    [ 3077.861359] CPU1 attaching sched-domain:
    [ 3077.861363]  domain 0: span 0-1 level MC
    [ 3077.861368]   groups: 1 0
    uname -r gave: 2.6.27-7-generic

  6. #5
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    Well, I think that i know what you were trying to do. I see that you have NDISwrapper installed. NDISwrapper will not work with Vista drivers, you have to use WinXP drivers.

    If you want to go that route, then find a WinXP driver and use that.

    There is a native Linux driver for your card (iwl3945 or iwlagn), but it is not loading. Did you blacklist it? If you want to use the Linux driver, you will have to remove/uninstall NDISwrapper.
    Please do not send Private Messages to me with requests for help. I will not reply.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •